Tender For Civil Maintenance Work Of Type-5 And Type-6 Houses Located In Raj Bhavan Colony. - Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes , Having Thermal Stability For Hot & Cold Water Supply , Including All Cpvc Plain & Threaded Fit, lucknow-Uttar Pradesh

Tender For Civil maintenance work of Type-5 and Type-6 houses located in Raj Bhavan Colony. - Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes , having thermal stability for hot & cold water supply , including all CPVC plain & threaded fittings . This includes jointing of pipe & fitting with one step CPVC solvent cement trenching , refilling &testing joints complete as per direction of Engineer - in - charge: exposed on wall (25 mm nominal dia pipes)(18.7.3) 2 Providing and fixing 20mm diachlorinated polyvinyl chloride (cpvp )pipes , having thermal stability for hot & cold water supply including the supply with clamps at 1.00m spacing . This includes jointing of pipe and fiting with one step salvent cement and testing of joints complete as per direction of Engineer in charge -Internal work - Exposed on wall (dar-18.7.2) 3 ProvidingandfixingG.I.pipescompletewithG.I.fittingsandclamps, including cutting and making good the walls etc. Internal work- Exposed on wall 15 mm dia nominal bore(dar-18.10.1) 4 ProvidingandfixingG.I.pipescompletewithG.I.fittingsandclamps, including cutting and making good the walls etc. Internal work- Exposed on wall 20 mm dia nominal bore(dar-18.10.2) 5 Providing and fixing20 mm diaball valve(brass) of approved quality,high or low pressure , with plastic floats complete(dar-18.18.2) 6 Providing and fixing15mm diaball valve(brass) of approved quality,high or low pressure , with plastic floats complete(dar-18.18.1) 7 Providing and fixing c.p brass shower rose with 15 or mm inlet :150 mm dia meter (dar-18.22.2) 8 Providing and fixing G.I union in g.i pipe including cutting and threading the pipes ans making long screws etc complete - New work 15 mm nominal bore(18.46.1) 9 Providing and fixing G.I union in g.i pipe including cutting and threading the pipes ans making long screws etc complete - New work 20 mm nominal bore(18.46.2) 10 Providing and fixing c.p brass angle valve for basin mixer and geyser point of approved quality conforming to IS:8931 15 mm nominal bore (dar-18.53.1) 11 Providing and fixing PTMT Ball cock of approved quality , colour and making complete with epoxy aluminium rod with L.P/ H.P.H.D plastic ball :15 mm nominal bore , 105 mm long weighingnot less than 138gms(dar-18.62.1) 12 Providing and fixing 8 mm dia c.p / ss jet with flaxible tube upto 1 meter long s.s triangular plate to European type w.c of quality and make as approved by engineer in charge (DAR-17.16A) 13 providing and fixing p.v.c low level flushing cistern with manually controlled device (handle lever) conforming to is :7231 with all fitting and fixtures complete (10 litre capacity -white )(dar-17.18.1 14 Providing and fixing P.V.C waste pipe for sink or wash basin including P.V.C waste fitting complete . Semi rigid pipe ,32 mm dia(dar-17.28.1.1) 15 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality ) complete with 6 mm thick hard board ground fixed to wooden cleats with c.p brass screws and washers complete(dar-17.31) 16 Providing & fixing float glass panes :(5.00 mm thick glass panes ) wright not lessthen 12.50 kg/sqm dar - 9.7.7.2) 17 Provding and fixing ISI marked flush door shutters conforming to IS : 2202 (part-1) non- decorative type, core of block board contruction with frame of 1st class hard wood and well matched commercial 3 ply veneers on both faces of shutter :35 mm thick including isi marked stainless steel butt hinges with necessary (9.21.1) 18 Fly proof stainless steel grade 304 wire gauge with 0.50 mm dia wire and 1.4 mm wide aperture with matching wood beading (9.7.8) 19 Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws 13 mm thick shutterwith ISI marked M.S. pressed butt hinges bright finished of required size 9.27.2.1 20 Providingandfixing600x120x5mmglassshelfwithedgesroundoff, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.DSR NO-17.33 21 Providingandfixingwhitevitreouschinapedestaltypewatercloset (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushingcistern,includingflushpipe,withmanuallycontrolleddevice (handlelever),conformingtoIS:7231,withallfittingsandfixtures complete, including cutting and making good the walls and floors wherever requiredWC pan with ISI marked white solid plastic seat and lid : DSR NO-17.2.1 22 Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting offittingsandbrackets,cuttingandmakinggoodthewallswherever required:-White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer DAR No- 17.7.A 23 Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubberplug,40mmC.P.brasswastecomplete,includingpaintingthe fittings and brackets, cutting and making good the walls wherever required: White glazed fire clay kitchen sink of size 600x450x 250 mm DAR NO:17.9.1 24 Providing and fixing stainless steel A ISI 304 (18/8) kitchen sink as per IS :13983 with c.i brackets and stainless steel plug 40 mm including painting of fitting and brackets , cutting and making good the walls wherever requried (kitchen sink with drain board )(510x1040 mm bowl depth 250mm)(dar-17.10.1.1) 25 Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball.20 mm nominal bore, 120 mm long, weighing not less than 198 gms DSR NO-18.62.2 26 Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge.15 mm nominal dia DAR NO-17.22B 27 Providing and fixing brass curtain rods ofwall thickness 1.25 mm with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete. 25 mm diameter.DAR NO-14.28.2 28 Providing and placing on terrace (at all floor levels )polyethlene water storage tank . IS:12701 marked , with cover and suitable locking arrangement and making necessary holes or inlet , outlet and overflow pipes but without fitings and the base support for tank (Dar-18.48) 29 Providing and fixing CP Brass 32 mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.DAR NO-17.22A

INR 770 /-

INR 33000.0 /-

INR 3.30 Lakhs /-