}

Tender For Urgent Repair And Maintenance To Mw Building Cherthala, cherthala-Kerala

Bharat Sanchar Nigam Limited has published Tender For Urgent Repair And Maintenance To Mw Building Cherthala. Submission Date for this Tender is 27-02-2025. Building Work Tenders in cherthala Kerala. Bidders can get complete Tender details and download the document.




Tender Notice

47785083
Corrigendum : Tender For Urgent Repair And Maintenance To Mw Building Cherthala
Tender
Indian
Kerala
Cherthala
27-02-2025

Tender Details

Tender For Urgent Repair And Maintenance To Mw Building Cherthala; 1 Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge. 2 Supply and filling crushed stone sand in the existing cable trench in layers , consolidating by ramming and watering all complete 3 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate 4 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 5 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal sizederived from natural sources) 6 Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. 7 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work 8 Providing and fixing PTMT pillar cock of approved quality and colour 15 mm nominal bore, 125 mm long foam flow, weighing not less than 120 gms 9 Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. 10 Providing and fixing uplasticised PVC connection pipe with brass unions : 30 cm length 20 mm nominal bore 11 Removing blocks in water closets, waste lines soil waste lines man holes and gully traps etc including disposal of waste with in 50 m lead as directed by the engineer in charge 12 Repairing the damaged bib cocks, stopcocksand pillar taps by replacing the washers and other fittings etc. complete as directed by the Engineer in charge 13 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931. 15mm nominal bore 14 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittingsarrangement of approved quality and colour. 15 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm 16 Cleaning and removing long standing stains of terrazzo floor tiles, ceramic glazed floor tiles,ceramic glazed wall tiles using suitable cleaning agents and mild acids etc. complete as per the direction of Engineer in charge 17 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 32 mm dia 18 Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. 19 One coat. 20 12 mm cement plaster of mix : 21 1:6 (1 cement: 6 fine sand) 22 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : 23 W.C. pan with ISI marked white solid plastic seat and lid 24 Providing and fixing PTMT bib cock of approved quality and colour. 25 15mm nominal bore, 86 mm long, weighing not less than 88 gms 26 Providing and fixing PTMT grating of approved quality and colour. 27 Circular type, 100 mm nominal dia 28 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. 29 Providing and fixingPTMT health faucet of approved quality of standard design 15 mm nominal bore 30 Checking and attending minor repair work of plumbing, floors around W/C , wash basin . Sink etc., as directed by the engineer in charge (a) Plumber 31 Renewing glass panes, with wooden fillets wherever necessary: 32 Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) 33 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. 34 With cement mortar 1:4 (1 cement : 4 fine sand) 35 White washing with lime to give an even shade : 36 Old work (two or more coats) 37 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete 38 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work 39 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade 40 New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) 41 Checking and attending minor repair work of aluminium works such as repairs to doors, windows etc by removing from the frame work and making necessary repairs suchas cutting, repairing locks and door closers etc. as directed by the engineer in charge. The material used if any may paid separately.(a) Aluminium worker

Corrigendum Details

Sr No CorrigendumDate Corrigendum CorrigendumType NewSubmissionDate
1 22-02-2025 change in date of opening and closing Date 27-02-2025

Key Value

Document Fees
INR 590 /-
EMD
INR 6198.0 /-
Tender Value
Refer document
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail