|
| 1 | Civil work |
| 2 | Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litreof approved brand and manufacture to give an even shade : Old work (one or more coats) |
| 3 | Painting with synthetic enamel paint of approved brand and manufacture of requiredcolour to give an even shade :One or more coats on old work |
| 4 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle ironand 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using flats 30x6mm for diagonal braces and central cross piece |
| 5 | 25 mm thick PS flooring |
| 6 | 12 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) |
| 7 | 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement :5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand). |
| 8 | P/F 2 mm MS sheet door |
| 9 | Providing and fixing PVC Door Frame of size 50x47 mm with a wall thickness of 5 mm(± 0.2 mm), made out of single piece extruded PVC profile, with mitred cut joints and joint with 2 nos of PVC bracket of size 190 mm x 100 mm long arms of cross section size35 x 15 mm & self driven self taping screws, the vertical door profiles to be reinforced with 40x20 mm M.S. rectangular tube of 0.8 mm , including providing EPDM rubbergasket weather seal throughout the frame, including jointing 5 mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wallusing 8 x100 mm long anchor fasteners complete, all as per manufacturer\"s specification and direction of Engineer -in- charge. |
| 10 | 24mmthickfactorymadePVCdoorshuttersmadeofstylesandrailsofauPVChollowsectionofsize59x24mm andwallthickness2mm(±0.2mm)withinbuiltedgingonboth sides.Thestylesandrailsmitredand jointathecornersbymeansofM.S.galvanised/ plasticbrackets of size75x220mmhavingwall thickness 1.0mmand stainless steelscrews. The styles of the shutter reinforcedby insertinggalvanisedM.S. tubeof size 20x20mmand1mm(±0.1mm)wallhickness.Thelockrailmadeupof\"H\" section,auPVChollowsectionofsize100x24mmand2mm(±0.2mm)wall thickness, fixedtotheshutterstylesbymeansof plastic/galvanisedM.S. \"U\" cleats.Theshutter framefilled withauPVCmulti-chamberedsinglepanelofsizenot lessthan620mm, havingoverall thicknessof20mmand1mm(±0.1mm)wallthickness. Thepanelsfilledverticallyandtiebarattwoplaces byinsertinghorizontally 6mmgalvanisedM.S. rod and fastened with nutsandwashers, completeaspermanufacturer\" sspecificationanddirectionof Engineer in-charge. (For W.C. and bathroom door shutter). |
| 11 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :15 mm nominal bore |
| 12 | Removing dry or oil bound distemper, water proofing cement paint and the like byscrapping, sand papering and preparing the surface smooth including necessary repairs tocratches etc. complete. |
| 13 | Providing and applying white cement based putty of average thickness 1 mm, of approvedbrand and manufacturer, over the plastered wall surface to prepare the surface even andsmooth complete. |
| 14 | Applying priming coats with primer of approved brand and manufacture, having low VOC(Volatile Organic Compound ) content.With water thinnable cement primer on wall surface having VOC content less than 50grams/litre |
| 15 | Flyash brick work with 1:6 cm S/S |
| 16 | Finishing walls with water proofing cement paint of required shade : Old work (one or more coats @ 2.20 kg/10 sqm) complete |
| 17 | Brickwork with flyash with 1:6 cm F/P |
| 18 | 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) |
| 19 | Total impact of GST for the purpose of CTC |
