Repair Work At Gps Gayatri Mandir Ki Dhani, Padu Kallan Thesil - Riyan - Part-A (Civil Work) Based On Bsr Pwd 2022 Random Rubble Stone Masonry With Hard Stone In Superstructure Above Plinth Level And Upto Five Level Above 30Cm, Thick Walls In: Cement Mo, Nagaur-Rajasthan

Repair Work At Gps Gayatri Mandir Ki Dhani, Padu Kallan Thesil - Riyan - PART-A (Civil Work) Based on BSR PWD 2022 Random Rubble stone masonry with hard stone in superstructure above plinth level and upto five level above 30cm, thick walls in: Cement Mortar 1:6 (1-Cement: 6-Sand). Supplying and fixing stone lintels/bed plates of approved quarry rough dressed in cement mortar 1:4 Upto 15 cm. thick: Half Brick work with mechanised autoclaved fiyash lime bricks conforming to IS: 12894 :2002 of class designation 75 in superstructure above plinth level upto floor V level in. Cement mortar 1:6 (1 cement: 6 coarse sand) Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead With cement mortar 1:4 (1 cement: 4 coarse sand) Providing & Fixing Ist quality standard White, gray, ivory,fume red brown, light green, light blue and other light shades glazed tiles confirming to IS: 13753 and IS: 15622 of size 300mm x 200mm in walls, floors, steps, pillars etc, laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster on walls and piller) Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding: New work (two or more coats) over and including scrapping and priming coat with cement primer. Finishing walls with Acrylic Smooth exterior paint of required shade including all scaffolding. New work (Two or more coat applied @ 1.67 ttr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/10 sqm). Door Frames:- Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10 cm of 1:3:6 (1 cement: 3 coarse sand: 6 agraded stone aggregate 20 mm nominal size) or with wooden plugs and screws or raw plugs and screws or with fixing clips or with bolts and nuts as require including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Providing and fixing M.S. sheet 1mm thick Single leaf door shutter windows in angle iron frame 35x35x5 mm suitabilly diagonally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of Engg. incharge but excluding cost of chowkhats: including two coats of anit corrosive red oxide primer paint Providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section (IS 1038-1983) joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm. of 1:36 (1cement: 3 coarse sand graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuls as required including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sash pulty of approved make or motal beading with scrows complote including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required Partly fixed and partly openable [ fixed area not to exceed 33%] Sub Total Part A PART-B (sanitary Work) Based on BSR PWD 2022 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings Vc fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,) 20mm nominal outer dia pipes Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings lic fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc..) 25 mm nominal outer dia pipes P & F Indian type white glazed vitreous china 1 quality W.C. orissa pan (IS 2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor: SIZE 530°410MM P&F WWC wash basin (1st quality, I.S.: 2556 Mark) of approved make with C.I. brackets duly painted, 1 No. 15 mm C.P. Pillar cock (IS: 8934 Mark) & 32 mm C.P. brass waste coupling of approved make,25 mm G.1. waste pipe complete including cutting & making good the wall: 450 x 300 mm P & F Bib Cock (IS: 8831 Mark) superior quality of approved make.C.P. Brass 400 gm, 15 mm nominal bore. P&F Inlet connection (Angle Valves) Superior quality of approved make C.P. Intel connection 15 mm brass (IS: 8931) P&F rigid PVC Pipe (IS:4985 mark) class / (4 Kg/Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant. 110 mm dia P&F rigid PVC pipe fittings (15: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and Jubricant: Bend 87.6 110mm dia

Refer document

Refer document

INR 2 Lakhs /-