Tender For Maintenance Of Oidc Sub-Division Office At Silvassa, Ut Of Dnhdd (2Nd Call), Silvassa-Dadra And Nagar Haveli

TDR : 47749241

Tender Notice
BOQ

Expired

Silvassa , Dadra And Nagar Haveli

Tender Brief : Tender For Maintenance Of Oidc Sub-Division Office At Silvassa, Ut Of Dnhdd (2Nd Call)

Document Fees
₹ 590 /-

EMD
₹ 28265.0 /-

Tender Value
₹ 14.13 Lakhs /-

Submission Date
20-02-2025

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Providing and fixing wsh down water closet (European type, W.C. Pan) with integral P or S trap including jointing the trap with soil pipe in Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal and cover to be measured and paid for separately)(A) vitreous China Pattern :(i) in white colour
2	Providing and fixing 100mm size P or S trap for water closet squatting pan including jointing the trap with the pan and soil pipe in cement Mortar 1:1 (1-Cement : 1-Fine sand)(A) Vitreous China.
3	Providing and fixing in Cement Mortar 1:3 (1-Cement : 3-coarse sand)a, pair of white vitreous China 250mm x 130mm x 30mm footrest to long pattern squatting pan water closet.
4	Providing and fixing 12.5 Litres low level flushing cistern with a pair, of C.I. or Mild brackets, complete with fittings such as lead valve less syphon, 15mm nom.nal size brass ball valve with polythene float, C.P brass handle unions and couplings for connections, with inlet, outlet and overflow pipes, 40mm dia. porcelain enamelled flush bend including cutting holes in walls and making good the same connecting the flush bend with cistern andcloset (overflow pipe to be measured and paid for separately)(A) Vitreous China (I) In white colour
5	Providing and fixing in position with clamps etc. 32mm nominal internal diameter galvanised steel tube flush pipe for high level flushing cistern including connecting the flush pipe with cistern and closet and making good the walls and floors.
6	Providing and fixing G.I. inlet connection for flush pipe with W.C. Pan
7	Providing and fixing plastic seat and cover for wash down water closer with C.P. brass hinges and rubber buffers. (B) Black plastic seal and cover.
8	Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S. brackets painted white including sutting holes and making good the same but excluding fittings.(A) Vitreous China:(ii) Flat Back washbasin 550 mm x v 400mm size. (i) In white colour.
9	Providing and fixing C.P. brass waste for washbasin or sink. (A) 32mmdia.
10	Providing and fixing M.I. fisher union for washbasin or sink. (A) 32mm dia.
11	Providing and fixing Rubber plug for sink or wash basin.
12	Providing and fixing chromium plated, bottle trap with necessary couplings of approved quality for wash basin.
13	Providing and fixing 100mm sand cast iron grating for gully, floor or Nahni trap.
14	Providing and fixing 600mm x 450mm bevelled edge mirrror of superior glass mounted on 6mm thick A.C. sheet or plywood sheet and fixing to wooden pluge with C.P. brass screws and washers.
15	Providing and fixing C.P. brass towel rail comlete with C.P. brass brackets fixed to wooden plugs with C.P. brass scews.(B) 600mm x 20mm size.
16	Providing and fixing toilet paper holder.(A) C.P. Brass
17	Providing and fixing screw down bib taps of following size.(A) Brass screw down bib tap polished bright. (i) 15mm dia.
18	Providing and fixing Urinal of approved quality including connection with trap and with integral longitudinal flush pipe.(A) Squating plate pattern white earthenware 550mm x 300mm.
19	Removing dry or oil bound distemper by a washing and scraping and sand papering the wall surface smooth including necessary repairs to scratches complete. for removing dry oil bound distemper on ceilings and sloping roofs.
20	Distempering with dry distemper of approved brand and manufacture (two coats) and of required shade on wall surfaces of given an even shade, over and including a priming coat of whiting after thoroughly brooming the surface free from mortar dropping and other foreign matter. Extra over Items No. 38 and 39 of every subsequent coat at distempering with dry distemper of approved brand and manufacture. Extra over item 38 for distemepring with dry distemper on ceilings and slopings roofs.
21	Finishing wall with water proofing cement paint of on wall surfaces (Two coats) to give an approved brand and manufacture and of required shape even shade after thoroughly brushing the surface to remove all dirt and remains of loose powered materials. for every subsequent coat of water proofing cement paint of approved brand and manufacture. finishing with cement paint on ceiling and sloping roofs.
22	Provoding and fixing flush door shutters, solid core construction with frame of first class hardwood with cross board and face veneer or plywood face panels, including anodised alluminium butt hinges with necessary screws. (B) Non-decorative type and block board core anodised alluminium butt hinges in flush door shutters (2) 35 mm thick.
23	Providing and fixing 35 mm thick shutters for Doors, windows and clerestory windows including Indian teak wood frames 10 cm x 7 cm. size including anodized alluminium fixtures and fastenings including primer coat of approved quality and two coats of oil painting etc, complete. (i) Fully Glazed.
24	Providing and fixing Decorative plywood 4mm thick in partitions including fixing to frames with screws etc, complete with 50mm x 12mm teak wood beading
25	Providing and fixing vertical/Horizontal blinds on windows of approved make including all leads and lifts complete as directed by Engineer in charge.
26	Providing and fixing plain false ceiling with alluminium frame consisting of 600mm x 600mmmade using anodized alluminium T section of size 1 x 1 (235 x 25mm, 19 gauge or 1 mm thick) in square pattern of grid sizes of 2 x 2 (600 x 600mm) The alluminium frame work is supported from the cceiling with the help of G.I. hook and G.I. wire/6mm M.S. rods of required sizes to maintain proper level etc. The aluminium frame work is supported on side wall with the use of alluminium L section of size 1 x 1 (25 x 25mm) angles etc.complete as per direction of Engineer in charge. Manufactures specification and drawing.
27	Providing dampproof course layer for water proofing of approved brand including all lead and lift etc complete and as directed by Engineer in charge.
28	Providing and Fixing (Hydraulic, Revolving, Highback, Pushback) executive chairs of approved make including all leads and lifts as directed by the Engineer in charge.
29	Structural steel work ( Confirming to IS 4923-1997) riveted, bolted or welded in builtup for all type sections, in framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as per the structural designs and directions of Engineer in charge
30	Providing corrugated G.I. sheet of class-3 roofing fixed with glavanished iron J or L Hooks, Bolts and nuts 8mm diameter withbitumen and G.I. limpet washer or G.I. limpet washer. filled with white lead complete excluding the cost of purlins, Rafters and Trusses.(1) 0.80 mm thick sheet.
31	Repairing of existing aluminium windows by removing and replacing the bearing and oiling complete and refixing also cleaning of glass etc with all leads and lifts and as directed by Engineer in charge
32	Point wiring for Light / Fan/ Bell/ Primary Point with 2-1.5 sq. mm & earth wire of 1.5 sq. mm (green) both are of ISI marked1.1 kv grade FRLS PVC insulated multi strand copper wires upto max length of 10 mt, in below type of pipeerected with 6A Tissino Type ISI marked flush type switch / bell push and accessories erected on Metal / PVC/Wooden Box covered with 3 mm thick PC(Polycarbonate) /Acrylic/Laminated sheet. with necessary Lamp holder/ceiling rose / H.D.Connector as directedwith medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling complete.
33	Replacing approved make fan regulator resistance type for Ceiling fan
34	Point wiring for independent PLUG with following size mains earth wire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires upto 10 mt length, in following below of pipe erected complete with ISI marked 3 / 5 Pinsocket and tissino type switch erected with earth continuity connection erected onMetal / PVC/Wooden box covered with 3 mm thick PC(Polycarbonate) / Acrylic/Laminated sheet. 6/16A Plug and 16 amp switch with 2-2.5 sq. mm Cu. Mains from mcb d b boards. with 16 swg(1.6 mm thick) HGS metal conduitpipe and accessories painted black erected flushed on wall/ceiling complete.
35	Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC / Metallic/Wooden box, single mounting base frame covered with textured / metallic/whitefront plate modules erectedon/ in wall / ceiling with following type accessories
36	Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copperconductor for1.1 KV. to be laidon wall with necessary clamps or in existingtrench/ pipe of following size of cables(a) 2 core 2.5 Sq. mm
37	(a-1) 2 core 4 Sq. mm
38	(c) 2 core 10 Sq. mm
39	providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate on 240 V A.C. system and having breaking capacity10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark
40	Providing & erecting 240 V MCB double pole switch for motor & inductive load(C Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box having capacity 40 Amp.
41	Providing & erecting 415V MCB Four Pole Switch for Lighting Load (B curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having capacity 40 Amp.
42	Supplying & erecting 20 Amp 10 KA‘C Curve’ single pole MCB with 20 Amp. Plug socket, company fabricated powder coated sheet steel enclosure erected as directed with connection. Metal Clad Socket with metal clad top
43	Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) suitable for (A) single phase incoming and horizontal single phase outgoing 12 way
44	three phase incoming and single phase horizontal type outgoingPer phase isolation type (PPI) sheet steel double door 6 way
45	three phase incoming and single phase horizontal type outgoingPer phase isolation type (PPI) sheet steel double door 8 way
46	Providing and erecting approved make split air-conditioning unit consisting of copper condensing unit with fan motor, hermetically sealed rotary compressor with accessories etc. duly connected separately erected evaporating unit and blower motor with its accessories by means of extra supplied proper insulated copper tubing,drain PVC pipes suitable for ( cost includes powder coated Stand, Eco Friendly green gas charging, 15A plug top & Remote Control) with necessary core cutting. For 3 Star Rating of current year for 1.5 ton capacity
47	Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for1.1 KV. to be laidon wall with necessary clamps or in existing trench/ pipe of following size of cables 3 core 95 Sq. mm
48	Solder less crimping type Copper lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner 95 sq mm
49	Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die castpowder coated and high U.V. & corrosion resistancewith diffuserhoused in aluminium casted body with company mark/name120 to 300 V,Power Factor more than 0.9, THD < 10 %,CCT3000 K to 6500K,Luminaire efficacy> 85 lumens/watt ,LED efficiency 110 lumens/watt. LED driver efficiency > 85 % CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/Bridgeluxmake LED used for luminaire. ( fitting required LM-79 & LM-80 Certificates).LED Panel Light with provision for Plane front frame with translucent cover fixed to housing complete.IP20 36 watts, 24\" x 24\" mm, Surge- 2KV Cat III -
50	Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or ceilingerected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in approved manner as directed (a) 25mm
51	32mm
52	Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single mounting base frame covered with textured / metallic/white front plate , modules erectedwith necessary connections as per site situation directed by Engineer In charge. (a) One No. SP 6 Amp.
53	One No 5 pin plug
54	Blank Plate Single
55	16 Amp. SP one way switch
56	6/16Amp. Universal socket
57	6 Amps. Bell Push
58	Repairing and maintenance work of existing AC viz., gas filling,complete servicing including all lead and lift etc complete and as per the direction of Engineer incharge
59	Providng and fixing photo copier machine of Kyocera ecosys M8124CIDN A3 colour multifunction, print, scan, copy, fax 24 ppm ADF 50sheetsRADF standard, 1 x 500 sheets paper input tray, 100 sheets multipurpose tray (by pass tray) duplex, Network USB 2.0 high speed

Need a Bussiness Loan? Apply Now!
Buy Digital Signature
Bidding Support

Also Visit

Tenders

Dadra And Nagar Haveli Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Maintenance Of Oidc Sub-Division Office At Silvassa, Ut Of Dnhdd (2Nd Call), Silvassa-Dadra And Nagar Haveli

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Sl. No.	Item Description
1	Providing and fixing wsh down water closet (European type, W.C. Pan) with integral P or S trap including jointing the trap with soil pipe in Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal and cover to be measured and paid for separately)(A) vitreous China Pattern :(i) in white colour
2	Providing and fixing 100mm size P or S trap for water closet squatting pan including jointing the trap with the pan and soil pipe in cement Mortar 1:1 (1-Cement : 1-Fine sand)(A) Vitreous China.
3	Providing and fixing in Cement Mortar 1:3 (1-Cement : 3-coarse sand)a, pair of white vitreous China 250mm x 130mm x 30mm footrest to long pattern squatting pan water closet.
4	Providing and fixing 12.5 Litres low level flushing cistern with a pair, of C.I. or Mild brackets, complete with fittings such as lead valve less syphon, 15mm nom.nal size brass ball valve with polythene float, C.P brass handle unions and couplings for connections, with inlet, outlet and overflow pipes, 40mm dia. porcelain enamelled flush bend including cutting holes in walls and making good the same connecting the flush bend with cistern andcloset (overflow pipe to be measured and paid for separately)(A) Vitreous China (I) In white colour
5	Providing and fixing in position with clamps etc. 32mm nominal internal diameter galvanised steel tube flush pipe for high level flushing cistern including connecting the flush pipe with cistern and closet and making good the walls and floors.
6	Providing and fixing G.I. inlet connection for flush pipe with W.C. Pan
7	Providing and fixing plastic seat and cover for wash down water closer with C.P. brass hinges and rubber buffers. (B) Black plastic seal and cover.
8	Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S. brackets painted white including sutting holes and making good the same but excluding fittings.(A) Vitreous China:(ii) Flat Back washbasin 550 mm x v 400mm size. (i) In white colour.
9	Providing and fixing C.P. brass waste for washbasin or sink. (A) 32mmdia.
10	Providing and fixing M.I. fisher union for washbasin or sink. (A) 32mm dia.
11	Providing and fixing Rubber plug for sink or wash basin.
12	Providing and fixing chromium plated, bottle trap with necessary couplings of approved quality for wash basin.
13	Providing and fixing 100mm sand cast iron grating for gully, floor or Nahni trap.
14	Providing and fixing 600mm x 450mm bevelled edge mirrror of superior glass mounted on 6mm thick A.C. sheet or plywood sheet and fixing to wooden pluge with C.P. brass screws and washers.
15	Providing and fixing C.P. brass towel rail comlete with C.P. brass brackets fixed to wooden plugs with C.P. brass scews.(B) 600mm x 20mm size.
16	Providing and fixing toilet paper holder.(A) C.P. Brass
17	Providing and fixing screw down bib taps of following size.(A) Brass screw down bib tap polished bright. (i) 15mm dia.
18	Providing and fixing Urinal of approved quality including connection with trap and with integral longitudinal flush pipe.(A) Squating plate pattern white earthenware 550mm x 300mm.
19	Removing dry or oil bound distemper by a washing and scraping and sand papering the wall surface smooth including necessary repairs to scratches complete. for removing dry oil bound distemper on ceilings and sloping roofs.
20	Distempering with dry distemper of approved brand and manufacture (two coats) and of required shade on wall surfaces of given an even shade, over and including a priming coat of whiting after thoroughly brooming the surface free from mortar dropping and other foreign matter. Extra over Items No. 38 and 39 of every subsequent coat at distempering with dry distemper of approved brand and manufacture. Extra over item 38 for distemepring with dry distemper on ceilings and slopings roofs.
21	Finishing wall with water proofing cement paint of on wall surfaces (Two coats) to give an approved brand and manufacture and of required shape even shade after thoroughly brushing the surface to remove all dirt and remains of loose powered materials. for every subsequent coat of water proofing cement paint of approved brand and manufacture. finishing with cement paint on ceiling and sloping roofs.
22	Provoding and fixing flush door shutters, solid core construction with frame of first class hardwood with cross board and face veneer or plywood face panels, including anodised alluminium butt hinges with necessary screws. (B) Non-decorative type and block board core anodised alluminium butt hinges in flush door shutters (2) 35 mm thick.
23	Providing and fixing 35 mm thick shutters for Doors, windows and clerestory windows including Indian teak wood frames 10 cm x 7 cm. size including anodized alluminium fixtures and fastenings including primer coat of approved quality and two coats of oil painting etc, complete. (i) Fully Glazed.
24	Providing and fixing Decorative plywood 4mm thick in partitions including fixing to frames with screws etc, complete with 50mm x 12mm teak wood beading
25	Providing and fixing vertical/Horizontal blinds on windows of approved make including all leads and lifts complete as directed by Engineer in charge.
26	Providing and fixing plain false ceiling with alluminium frame consisting of 600mm x 600mmmade using anodized alluminium T section of size 1 x 1 (235 x 25mm, 19 gauge or 1 mm thick) in square pattern of grid sizes of 2 x 2 (600 x 600mm) The alluminium frame work is supported from the cceiling with the help of G.I. hook and G.I. wire/6mm M.S. rods of required sizes to maintain proper level etc. The aluminium frame work is supported on side wall with the use of alluminium L section of size 1 x 1 (25 x 25mm) angles etc.complete as per direction of Engineer in charge. Manufactures specification and drawing.
27	Providing dampproof course layer for water proofing of approved brand including all lead and lift etc complete and as directed by Engineer in charge.
28	Providing and Fixing (Hydraulic, Revolving, Highback, Pushback) executive chairs of approved make including all leads and lifts as directed by the Engineer in charge.
29	Structural steel work ( Confirming to IS 4923-1997) riveted, bolted or welded in builtup for all type sections, in framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as per the structural designs and directions of Engineer in charge
30	Providing corrugated G.I. sheet of class-3 roofing fixed with glavanished iron J or L Hooks, Bolts and nuts 8mm diameter withbitumen and G.I. limpet washer or G.I. limpet washer. filled with white lead complete excluding the cost of purlins, Rafters and Trusses.(1) 0.80 mm thick sheet.
31	Repairing of existing aluminium windows by removing and replacing the bearing and oiling complete and refixing also cleaning of glass etc with all leads and lifts and as directed by Engineer in charge
32	Point wiring for Light / Fan/ Bell/ Primary Point with 2-1.5 sq. mm & earth wire of 1.5 sq. mm (green) both are of ISI marked1.1 kv grade FRLS PVC insulated multi strand copper wires upto max length of 10 mt, in below type of pipeerected with 6A Tissino Type ISI marked flush type switch / bell push and accessories erected on Metal / PVC/Wooden Box covered with 3 mm thick PC(Polycarbonate) /Acrylic/Laminated sheet. with necessary Lamp holder/ceiling rose / H.D.Connector as directedwith medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling complete.
33	Replacing approved make fan regulator resistance type for Ceiling fan
34	Point wiring for independent PLUG with following size mains earth wire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires upto 10 mt length, in following below of pipe erected complete with ISI marked 3 / 5 Pinsocket and tissino type switch erected with earth continuity connection erected onMetal / PVC/Wooden box covered with 3 mm thick PC(Polycarbonate) / Acrylic/Laminated sheet. 6/16A Plug and 16 amp switch with 2-2.5 sq. mm Cu. Mains from mcb d b boards. with 16 swg(1.6 mm thick) HGS metal conduitpipe and accessories painted black erected flushed on wall/ceiling complete.
35	Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC / Metallic/Wooden box, single mounting base frame covered with textured / metallic/whitefront plate modules erectedon/ in wall / ceiling with following type accessories
36	Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copperconductor for1.1 KV. to be laidon wall with necessary clamps or in existingtrench/ pipe of following size of cables(a) 2 core 2.5 Sq. mm
37	(a-1) 2 core 4 Sq. mm
38	(c) 2 core 10 Sq. mm
39	providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate on 240 V A.C. system and having breaking capacity10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark
40	Providing & erecting 240 V MCB double pole switch for motor & inductive load(C Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box having capacity 40 Amp.
41	Providing & erecting 415V MCB Four Pole Switch for Lighting Load (B curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having capacity 40 Amp.
42	Supplying & erecting 20 Amp 10 KA‘C Curve’ single pole MCB with 20 Amp. Plug socket, company fabricated powder coated sheet steel enclosure erected as directed with connection. Metal Clad Socket with metal clad top
43	Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) suitable for (A) single phase incoming and horizontal single phase outgoing 12 way
44	three phase incoming and single phase horizontal type outgoingPer phase isolation type (PPI) sheet steel double door 6 way
45	three phase incoming and single phase horizontal type outgoingPer phase isolation type (PPI) sheet steel double door 8 way
46	Providing and erecting approved make split air-conditioning unit consisting of copper condensing unit with fan motor, hermetically sealed rotary compressor with accessories etc. duly connected separately erected evaporating unit and blower motor with its accessories by means of extra supplied proper insulated copper tubing,drain PVC pipes suitable for ( cost includes powder coated Stand, Eco Friendly green gas charging, 15A plug top & Remote Control) with necessary core cutting. For 3 Star Rating of current year for 1.5 ton capacity
47	Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for1.1 KV. to be laidon wall with necessary clamps or in existing trench/ pipe of following size of cables 3 core 95 Sq. mm
48	Solder less crimping type Copper lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner 95 sq mm
49	Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die castpowder coated and high U.V. & corrosion resistancewith diffuserhoused in aluminium casted body with company mark/name120 to 300 V,Power Factor more than 0.9, THD < 10 %,CCT3000 K to 6500K,Luminaire efficacy> 85 lumens/watt ,LED efficiency 110 lumens/watt. LED driver efficiency > 85 % CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/Bridgeluxmake LED used for luminaire. ( fitting required LM-79 & LM-80 Certificates).LED Panel Light with provision for Plane front frame with translucent cover fixed to housing complete.IP20 36 watts, 24\" x 24\" mm, Surge- 2KV Cat III -
50	Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or ceilingerected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in approved manner as directed (a) 25mm
51	32mm
52	Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single mounting base frame covered with textured / metallic/white front plate , modules erectedwith necessary connections as per site situation directed by Engineer In charge. (a) One No. SP 6 Amp.
53	One No 5 pin plug
54	Blank Plate Single
55	16 Amp. SP one way switch
56	6/16Amp. Universal socket
57	6 Amps. Bell Push
58	Repairing and maintenance work of existing AC viz., gas filling,complete servicing including all lead and lift etc complete and as per the direction of Engineer incharge
59	Providng and fixing photo copier machine of Kyocera ecosys M8124CIDN A3 colour multifunction, print, scan, copy, fax 24 ppm ADF 50sheetsRADF standard, 1 x 500 sheets paper input tray, 100 sheets multipurpose tray (by pass tray) duplex, Network USB 2.0 high speed

Tender For Maintenance Of Oidc Sub-Division Office At Silvassa, Ut Of Dnhdd (2Nd Call), Silvassa-Dadra And Nagar Haveli

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us