|
| 1 | Attending complaints such as leakage and other petty repairs including providing and replacing minor items and spindle and ensuring proper and trouble free functioning of Pillar taps etc of any description or size, complete all as specified and directed by Engineer-in- Charge.Note:-(a) Rectificatin of leakage by replacing tap washers, tightning the handle/knob/nuts/screws, tightning loosely fitted tap, replacement of thread seal tape/cotton thread, removing any blockage from tap or PVC connection pipe, tightning PVC connection pipe etc will be treated as minor/petty repairs. Quoted rate shall deemed to be inclusive of same(b) Tap washers, washers for PVC connection pipe, nut/screw, thread seal tape/cotton thread, shellac, solvent cement etc shall be treated as miror items which shall be provided by the contractor as required with out extra cost. Quoted rate shall deemed to be inclusive of same.(c) Five(05) numbers of complaint shall be measured as one unit(Each Job) |
| 2 | Attending complaints such as non functioning of flushing cistern, leakage and other petty repairs including providing and replacing minor items and ensuring proper and trouble free functioning of low/high level flushing cistern complete all as specified and directed by Engineer-in-Charge.Note:-(a) Rectificatin of leakage by correcting siphon washers, replacing washers of PVC connection, tightning the handle/knob/nuts/screws, tightning or replaced loosely fitted float or ball, removing, cleaning and refixing of siphon, replacement of thread seal tape/cotton thread, removing any blockage from inlet/out let mouth or from PVC connection pipe, tightning PVC connection pipe, fixing of flush pipe and cone, handle, brackets etc will be treated as minor / petty repairs.(b) Washers for PVC connection pipe, nut/screw, thread seal tape/cotton thread, shellac, solvent cement, M seal etc shall be treated as miror items which shall be provided by the contractor as required with out extra cost. Quoted rate shall deemed to be inclusive of same.(c) Five(05) numbers of complaint shall be measured as one unit(Each Job) |
| 3 | Attending complaints and carrying out Petty/minor repairs to joinery and builders hardwares, such as easing/adjusting of shutters of any type or size, re-fixing of wire mesh, cub board shutters/shelves, easing/adjusting/refixing of hinges, tower bolts, handles, stoppers, sliding bolts / locks, magic eye, hook and eyes, hasp and staples, etc, of any type and size, and ensuring proper and trouble free functioning, including providing and replacing minor items complete all as specified and directed by Engineer-in-Charge.Note:-(a) Easing/adjusting of shutters and builders hardwares, tightning the handle/knob/nuts/screws, oiling/greasing of builders hardwares etc will be treated as minor / petty repairs.(b) Screws, nails, adhesives etc shall be treated as miror items which shall be provided by the contractor as required with out extra cost. Quoted rate shall be deemed to be inclusive of same.(c) Five(05) numbers of complaint shall be measured as one unit(Each Job) |
| 4 | Dismantling of floor, hearth or wall tiling including cement mortar bedding but not backing) and rubbish of the premises all as specified. |
| 5 | Material and Labour for vitrified ceramic tiles 8-10 mm thick polished area of each tiles not exceeding 0.36 sqm but not exceeding 0.42 Sqm, of any shade and any pattern (pattern consists combination of two or more tiles ) as in floor etcjointed in neat cement slurry and pointed in colored cement to match colour tiles over and including 15mm thick screed bed in CM 1:6 and pointed in coloured cement to match coloured tiles complete complete all as specified and as directed.. Note:- (i) The colour, shade and pattern shall be approved by the GE during execution work. (ii) No extra cost shall be allowed for Removing and refixing and necesary cutting of door etcif any required during execution of work. |
| 6 | Material and Labour for Non-skid light coloured Ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not excceding 0.18 Sqm, in floors etc, set and jointed in cement mortar and pointed in white or coloured cement to match, laid over and including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 7 | Material and labour for glazed ceramic coloured tiles in vertical surface 450x350x7-8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles over and including 10mm thick backing coat in CM 1:4complete complete all as specified and as directed. |
| 8 | Taking down cement plaster in cement or cement lime mortar onBrick or stone walls etc. including racking out joints, hacking for key , scrubbing down with water etc, inckluding removal of debries out sideMD landall as specified and directed. |
| 9 | Material and labour for rendering 10mm thick in Cement Mortar 1:6 on fair faces of brick walls or on concrete surfaces, finished even and smooth,without using extra cement complete all as specified and directed. |
| 10 | Material and Labour for rendering 5mm thick on fair faces of concrete work in CM 1:4, using water proofing compound @3% by weight of cement, finished even and smooth without using extra cement complete all as specified and as directed.Note: Water proofing compound shall be measured separately. |
| 11 | Material and Labour for cement plaster 5mm thick in CM 1:3 on concrete surface as on ceilling finished even and smooth with out using extra cement complete all as specified and as directed. |
| 12 | Supply only integral water proofing compound all as specified and as directed. |
| 13 | Material and labour for preparation of new plastered/concrete surfaces of walls, providing one or more coats of Birla white wall care putty to achieve smooth surfaces and applying two coats ofdistemper oil emulsion of approved shade/tint over a coat of compatiable priming paint complete all as specified. |
| 14 | Material and labour for Preparation of new ceiling surfacesincluding washing, rubbing down and stopping by brooming down, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coats ofacrylic distemper on wall surfaces complete all as specified. |
| 15 | Material and labour for Preparation of new ceiling surfacesincluding washing, rubbing down and stopping by brooming down, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coats ofacrylic distemper on wall surfaces complete all as specified. |
| 16 | Material and labour for preparation of old distempered wall surfaces by washing, rubbing down and stopping the surfaces and applying Two coat ofacrylic distemper applied to walls up to 4th floor complete all as specified and directed |
| 17 | Material and labour for preparation of old distempered wall surfaces by washing, rubbing down and stopping the surfaces and applying Two coat ofacrylic distemper applied to walls for 5th floor to 8th floor complete all as specified and directed |
| 18 | Material and labour for preparation of old distempered ceiling surfaces by washing, rubbing down and stopping the surfaces and applying Two coat ofacrylic distemper applied to walls upto 4th floor complete all as specified and directed |
| 19 | Material and labour for preparation of old distempered ceiling surfaces by washing, rubbing down and stopping the surfaces and applying Two coat ofacrylic distemper applied to walls for 5th floor to 8th floor complete all as specified and directed |
| 20 | M & L Preparation of old distempered and paintedsurfaces including washing, rubbing down and stopping by brooming down , scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of acrylic distemper on wall surfaces upto 4th floor, complete all as specified and directed. |
| 21 | M & L Preparation of old distempered and paintedsurfaces including washing, rubbing down and stopping by brooming down , scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of acrylic distemper on wall surfaces for 5th floor to 8th floor, complete all as specified and directed. |
| 22 | Material and labour for preparation of old distempered ceiling surfaces by washing, rubbing down and stopping the surfaces and applying one coat ofacrylic distemper applied to ceiling complete all as specified and directed |
| 23 | Material and labourfor preparation of existing treatment of old surface including brooming down , scrapping down smoke soot,mould, moss and efforescent salts and trading oil and grease spouts and cleaning with water on wall applying one coats of weather proof acrylic emulsion exterior grade (anti fungal paint) premium quality of any tint as approved upto 4th floor complete all as specified and as directed by Engineer-in-Charge. |
| 24 | Material and labourfor preparation of existing treatment of old surface including brooming down , scrapping down smoke soot,mould, moss and efforescent salts and trading oil and grease spouts and cleaning with water on wall applying one coats of weather proof acrylic emulsion exterior grade (anti fungal paint) premium quality of any tint as approved for 5th floor to 8th floor, complete all as specified and as directed by Engineer-in-Charge. |
| 25 | Material and labourfor preparation of existing treatment of old surface including brooming down , scrapping down smoke soot,mould, moss and efforescent salts and trading oil and grease spouts and cleaning with water on wall applying Two coats of weather proof acrylic emulsion exterior grade (anti fungal paint) premium quality of any tint as approved upto 4th floor complete all as specified and as directed by Engineer-in-Charge. |
| 26 | Material and labourfor preparation of existing treatment of old surface including brooming down , scrapping down smoke soot,mould, moss and efforescent salts and trading oil and grease spouts and cleaning with water on wall applying Two coats of weather proof acrylic emulsion exterior grade (anti fungal paint) premium quality of any tint as approved for 5th floor to 8th floor, complete all as specified and as directed by Engineer-in-Charge. |
| 27 | Material and Labour for Preparation of new or previously untreated wood and wood based surfaces of any description not otherwise described over 10cm width girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified. |
| 28 | Material and labour for preparation of old decorated wooden surfaces of any description exceeding 10 cm width or grith not otherwise specified and applying one coat of syntheic enemal paint all as specified and as directed. |
| 29 | Material and labour for preparation of old decorated surfaces of steel of any description exceeding 10 cm width or grith not otherwise specified and applying one coat of syntheic enemal paint all as specified and as directed. |
| 30 | Taking down aluminium door and window frames without taking of shutters not exceeding 1.5 Square Metre Each and refixing in same opening complete all as specified and directed. |
| 31 | Supply and fix aluminium powder coated (Thickness or powder coating not less than 50 micron) frame for doors,windows, ventilators with one or more rebates with joint clip and using rubber beading etc complete all as specified and directed.Note:Quoted rate shall be inclusive of rubber beading, glazing clips. Glass panel/particle board panel filling shall be measured and paid separately. |
| 32 | Supply and fix for powder coated,Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.), hinges type B-21 100mm long (2 no.) suitable handle (1 no.) completeallasspecified.Note: Glass pane shall be measured and paid separately. |
| 33 | Supply and fix powder coated aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, and sliding tower bolt 150mm long anodised aluminium snap beading, screws etc. complete all as specified and as directed. |
| 34 | Supply and Fixing5.5 mm thick sheet glass tinted in square exceeding 0.5 Sqm in each pane for fixing in aluminium joinery including necessary beading as specified and as directed. |
| 35 | Material and Labour for pre-laminated particle board 12 mm thick, interior grade, prelaminated both side with decorative choice lamination, fixed with screws in timber frame work complete all as specified and directed. |
| 36 | Supply and fix Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples including taking out worn out wire cloth complete all as specified and directed. |
| 37 | Material and labour taking down chowkhats or frames, without taking off shutters from the frame exceeding 1.5 Sqm but not exceeding 4 sqm in each and removing as directed. |
| 38 | Material and labour taking down chowkhats or frames, without taking off shutters from the frame not exceeding 1.5 Sqmin each and removing as directed. |
| 39 | Taking down shutter of any description exceeding 2 Sqm but not exceeding 4 Sqm each and removing from sitecomplete all as specified and directed. |
| 40 | Taking down shutter of any description exceeding 1 sqm but not exceeding 2 sqm each and removing from sitecomplete all as specified and directed. |
| 41 | Material and labour forsecond class hard wood(indian teak wood) plain solid straight chowkats and frames, wrought framed rebated on the solid rounded or chamfered put together with glued pinned at joints, well seasoned and finished with polishing, fixed to wall and making good to wall carving as approved all as specified and directed. |
| 42 | Material and Labour for 30mm thick factory made flush shutter with solid core construction with block board core and plywood face panels commercial type on both sides including lipping on edges complete all as specified and directed. |
| 43 | Supply and Fix 2nd class HW glazed and skeleton shutters 35mm thk, open rebated and prepared to receive glass, gauze, etc. (withoutsash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed. |
| 44 | Supply and Fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with M.S. square tube and fixing in opening as per specification & drawing complete all as specified and as directed by the Engineer-in-Charge. |
| 45 | Supply and Fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC \"C\" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specifications complete all as specified and directed. |
| 46 | Supply and Fix in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average widht of aperature 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 47 | Supply and fix 100mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21complete all as specified and directed. |
| 48 | Supply and fix in repair 75mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-22complete all as specified and directed. |
| 49 | Supply and Fix in repair 100mm long aluminium anodised barrel tower bolt all as specified and as directed by Eng-in-charge. |
| 50 | Supply and Fix in repair 150mm long aluminium anodised barrel tower boltall as specified and as directedby Eng-in-charge. |
| 51 | Supply and Fix in repair 150mm long aluminium handle fabricated type anodisedall as specified and as directedby Eng-in-charge. |
| 52 | Supply and fixing in repair aluminium alloy,anodised, sliding door boltof length 250mm with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded section or cast-aluminium alloy complete all specified and as directed. |
| 53 | Supply and fix in repairs 4.00 mm thick sheet glass, ordinary quality and glazing with oil putty in squaren.exc 0.5 sqm in each pane, complete all as specified and as directed. |
| 54 | Supply and fix in repairs 4.00 mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane, complete all as specified and as directed. |
| 55 | Supply and fix in repairs 5mm thick figured glass, pin headed type andglazing fixed on aluminium jionery with glazing clips in square n exc 0.5 sq. m in each pane complete all as specified and as directed. |
| 56 | Supply and fix in repairs 5mm thick figured glass, pin headed type andglazing fixed on aluminium jionery with glazing clips in squareexc 0.5 sq. m in each pane complete all as specified and as directed. |
| 57 | Supply and fixing in repairsbevelled edge Mirror of selected quality glass 5mm thick fixed on commercial plywood and wooden pluges with CP Brass Screws ,Studs & cup washers all as specified and directed. |
| 58 | Supply and fixing in repair 600 mm long PVC connections 15 mm size with PTMT nuts at both end complete. |
| 59 | Supply and fix in repairwaste coupling of PTMT 32 mm size (half or full threaded) suitable for urinals/ WHB/Sink etc (Minimum weight 32 mm - 45 gms) all as specified and as directed. |
| 60 | Dismantling of water tanks of capacity exceeding 250 ltrs and not exceeing 500 ltrs capacity and removing from site complete all as specified and as directed by Engineer-in-charge. |
| 61 | Dismantling of water tanks of capacity exceeding 500 ltrs and not exceeing 1000 ltrs capacity and removing from site complete all as specified and as directed by Engineer-in-charge. |
| 62 | Supply and fix Rotational moulded Polyetheylene Water Storage Tank 500 Ltr capacity Triple Layer (Cylinderical verticle with closed top) including 15mm dia GI Medium Grade 200mm long overflow and wash out pipe each with all required fittings, Checknut, Stopper etc complete hoisted and fixed in position, including all incoming and outgoing connection of GI pipe complete and including 20mm PTMT Ball valves high pressure wiith epoxy coated aluminium rodand high density plastic ball screwed for iron pipe complete for 15mm dia pipe (Minimum weight 15mm-142 gms/each) fixed on roof top complete all as specified and directed. |
| 63 | Supply and fix Rotational moulded Polyetheylene Water Storage Tank 1000 Ltr capacity Triple Layer (Cylinderical verticle with closed top) including 15mm dia GI Medium Grade 200mm long overflow and wash out pipe each with all required fittings, Checknut, Stopper etc complete hoisted and fixed in position, including all incoming and outgoing connection of GI pipe complete and including 25mm PTMT Ball valves high pressure wiith epoxy coated aluminium rodand high density plastic ball screwed for iron pipe complete for 15mm dia pipe (Minimum weight 15mm-142 gms/each) fixed on roof top complete all as specified and directed. |
| 64 | Supply and fix in repair 10 Ltr capacity PVC valveless, syphonic action type, flushing cistern low level, white, with inlet ball valve, float and handle including brackets, flushing pipe, 450mm long PVC Connection and connection to trap, and to flushing and making good to floor complete all as specified . |
| 65 | Supply and fix in repair Plastic water closet seat, white, closed pattern with flat bottom, and cover and aluminised hinging device complete all as specified and directed. |
| 66 | Supply and fix in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium ally sheet foundation box, main body with stainless steel cover, govering pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.Make: SANDHU, EVEREST |
| 67 | Supply and fixin repairs Angle valve CP cast copper alloy, fancy type, with capstan handle, screwed down, high pressure screwed both ends for 15 mm bore iron pipe or for unions and fixed complete all as specified and directed. |
| 68 | Supply and fixing ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed suitable for 20 mmISI marked and taking down unserviceable ball valves all as specified and as directed. |
| 69 | Supply and fixin repairs Bib tap cast copper alloy CP , with capstan handle, screwed down, screwedfor 15 mm bore iron pipe or for brass ferrule and fixed, complete, all as specified. |
| 70 | Supply and Fixing15mm bore Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms) complete all as specified and directed. |
| 71 | Supply and fix in repairsStop valves, CP cast copper alloy , screwed down, high pressure, with crutch or butterfly handle, screwed both ends for 20mm bore iron pipe or for unions and fixed, complete all as specified. |
| 72 | Supply and fix 20 mm bore pillar taps cast copper alloy with capstan headsfancy type chromium plated screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and as directed. |
| 73 | Supply and fixing in repairs vitreous China wash hand basin, white, flat back size 580X450mm including 32mm brass chromium plated waste fitting, a pair of cast iron bracket duly painted including cutting and pinning in ends making good disturbed surfaces in CM 1:3 excluding pillar tap but chain , plug and porcelain stopper, brackets etc all as specified and as directed. |
| 74 | Supply and Fix in repair Brasschromiumplatedshower rose 125mm size with or without swivel joints, including fixing to steel pipe or union complete all as specified and directed. |
| 75 | Supply and fix in repair Brass CP mixerthree ways 15mm bore for mixing “Hot or cold” water screwed down for iron pipe” including OHT and Telephonic shower complete all as specified and as directed. |
| 76 | Supply and Fix in repair vitreous china wash down water closet Pedastal patternwhite (excluding flushing cistren ) including trap set, seat cover and fixing of flushing cistern, brackets, flushing pipeetc, etc. with\"P\" or \"S\" trap, making good the floor to match with existing floor complete all as specified and as directed. |
| 77 | Schedule of Credit (Minus) Rs.40480.00NOTE: Bidder shall insert credit amount of Rs. 40480.00 as ratein Green field under Col-13. |
