|
| 1 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer -In- Charge.The rate is inclusive all taxes levy by the government time to time excluding GST. |
| 2 | Providing corrugated 0.63mm (zero point six three millimetre) thick with zink coating not less than 275gms/m2 G.S. sheet roofing fixed with galvanized iron “J” or “L” hooks bolts and nuts 8mm (eight millimetre) diameter with bitumen and G.I. limpet washers filled with white lead complete excluding cost of purline, rafters and trusses.The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer -In- Charge.The rate is inclusive all taxes levy by the government time to time excluding GST.. |
| 3 | Providing 0.63mm (zero point sixty three millimetre) thick sheet ridges or hips 60cm (sixty centimetre) over all in plain G.I Sheet fixed with galvanized iron “J” or “L” hooks bolts and nuts 8mm (eight millimetre) dia G.I limpet and bitumen washer complete .The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer -In- Charge.The rate is inclusive all taxes levy by the government time to time excluding GST. |
| 4 | Steel workwelded in built up sections, framed work, in grating ,frames,guard bar,ladder, railing ,brackets,gates and silimilar works etc.including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer -In- Charge.The rate is inclusive all taxes levy by the government time to time excluding GST. |
| 5 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm(Fifty by fifty milimeter) including strengthening with 2 mm dia (two milimeter diammeter) wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge.The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer -In- Charge.The rate is inclusive all taxes levy by the government time to time excluding GST. |
| 6 | Providing and laying cement concrete work 1:2:4 (one Cement into two Sand into four graded stone aggregate twenty milimeter nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in Suspended Floor roofs, landing and shelves and their support balconies,beams,girders,bressumers and cantilever upto floor two levelas per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is inclusive all taxes levy by the government time to time excluding GST. |
| 7 | Providing and fixing 15mm (Fifteen milimetres) diameters C.P. brass bib cock with, within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is inclusive all taxes levy by the government time to time excluding GST. |
| 8 | Providing and fixing 15 mm (fifteen milimeter) nominal boreC.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.(eight hundred ten grammes) .The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is inclusive all taxes levy by the government time to time excluding GST. |
| 9 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, 15 mm (fifteen milimeter) nominal outer dia Pipes having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. The rate is inclusive all taxes levy by the government time to time excluding GST. |
| 10 | Providing and fixing 600mmx450mm (six hundred millimeter into four hundred fifty millimeter) bevelled edge mirror of superior glass mounted on 6mm (six millimeter) thick A.C. Sheet or plywood sheet and fixed to wooden plugs with C.P. screws and washers including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate is inclusive all taxes levy by the government time to time excluding GST. |
| 11 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes 75 mm (seventy five milimeter diameter) diameter conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten milimeter) gap for thermal expansion, (i) Single socketed pipes. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is inclusive all taxes levy by the government time to time excluding GST. |
| 12 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single tee with door 75x75x75 mm (seventy five by seventy fiveby seventy five millimetres)The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is inclusive all taxes levy by the government time to time excluding GST. |
| 13 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single tee without door 75x75x75 mm (seventy five by seventy fiveby seventy five millimetres)The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is inclusive all taxes levy by the government time to time excluding GST. |
| 14 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5° 75 mm ( Sventy five milimeter)The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is inclusive all taxes levy by the government time to time excluding GST. |
| 15 | Providing and fixingunplasticised - PVC pipe clip of 75mm dia (seventy five millimetres) approved design to unplasticisedPVC rain water pipes by means of 50x50x50mm (fifty millimetre into fifty millimetre into fifty millimetre) hard wood plugs, screwed with M.S screws of required length including cuttig bridk work and fixing in cement mortar 1:4( one cement :four course sand) making good thewalls etc.The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is inclusive all taxes levy by the government time to time excluding GST. |
| 16 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is inclusive all taxes levy by the government time to time excluding GST. |
| 17 | Providing and fixing 45cm (forty five centimetre) length 15mm(fifteen millimetre) nominal bore unplasticised PVCconnectionpipe with brass unions.The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate is inclusive all taxes levy by the government time to time excluding GST. |
