|
| 1 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cmdeep and getting out in hard/dense soil. |
| 2 | M&L for Hardcore of gauge n exc. 63 mm,with broken stone or bouldertsdeposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surfacecomplete all as specified and directed by engr in charge. |
| 3 | M&L for 100mm thick PCC type C-2, 1:3:6 (40mm graded aggregate) as in sub-base, floors and pavings etc complete all as secified and directed. |
| 4 | M&L for PCC 40 mm thick type B-1, 1:2:4 (20mm graded aggregate) as in Hard standing, floors and pavings etc and finished even and smooth without using extra cement complete all as secified and directed. |
| 5 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point of any soil. |
| 6 | M&L for Forming Construction joint 30mm deep x 10mm wide filled with sealing compound of Grade Ain floors complete all as specified and directed |
| 7 | Dismantling of plain or corrugated steel sheeting any gauge, thickness as in roof covering complete all as specified and directed |
| 8 | Supply and fix, 0.63 mm thick corrugated galvanised mild steel sheeting (minimum 275gm/sqm galvanising) with two corrugations side lap, fixed with L type or J type or cranked hooks , bolts and washer in roof, complete, all as specified and directed. |
| 9 | Supply and fix 0.80mm thickness plain galvanised mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashing of (minimum 275gm/sqm galvanising)complete all as specified and directed. |
| 10 | S & F 0.50 mm thick Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 11 | S & F 0.50 mm thick Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as inroof covering/cladding to wall, fixed with self tapping screws as specified. |
| 12 | Taking down chowkats or frames with shutter (without taking off shutter from the frame) exc 1.50 Sqm but n exc 4.0 Sqm each including iron mongeries complete all as specified and directed. |
| 13 | Taking down chowkats or frames with shutter (without taking off shutter from the frame) not exc 1.50 Sqm each including iron mongeries complete all as specified and directed. |
| 14 | M&L for Pressed steel frames of size 105x60mmfor doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed |
| 15 | M&L for Supply and fix 30mm thick single piece, coloured ABS (ACRYLONITRILE BRUTADINE STYRENE) coated, PUF filled door shutters with PUF (Poly Urethane Foam) insulation of minimum density 40 Kg/Cum filled in between two ABS sheets of thickness 1.2mm (min), border covered with insitu pasted ABS strips of width equal to thickness of door shutters, 1.2mm thickness, reinforced with two number 10mm CTD bars, pre-embedded with wooden blocks of suitable sizes for receiving hinges, tower / sliding bolts, towel rails, handles etc, with/without embossed pattern. |
| 16 | S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples |
| 17 | Supply and fix MS butt hinges medium weight, cold rolled 125mm size complete all as specified and directed. |
| 18 | Supply and fix MS butt hinges medium weight, cold rolled 100mm size complete all as specified and directed. |
| 19 | Supply & fix Aluminium anodisedbarrel tower bolt 150 mm long of extruded section etc complete all as specified and directed. |
| 20 | Supply & fix Extruded Aluminium anodised alloy handles fabricated type 150mm long complete all as specified and directed. |
| 21 | Supply & fix Extruded Aluminium anodised alloy handles fabricated type 100 mm long complete all as specified and directed. |
| 22 | Supply & fix aluminium alloy, anodised, sliding door bolts 250mm size with hasp, staple (bolt type) and fixing clips of sheets , cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy andfixed etc complete all as specified and directed. |
| 23 | S&F aluminium anodised power coated partition fixed/sliding type with frame of size-side and top rail 85 x 44.45 x 1.8mm, bottom and middle rail of size 150 x 44.45 x 1.8mm thick incl screwing of frame glass necessary joints, cleats, glazing clips rubber packing , snap beading , fixed to wall with necessary screws and plug complete all as specified and directed. (rates for 5mm thick tinted glass / aluminium composit panel reqt to be fitted in shutters is incl in the item). |
| 24 | S&F Aluminium power coated two track sliding window with two sliding shutters of 5mm thick glass pane, incl suitable nylon beading channel gasket, nylon roller Maruthi lock with handles etc complete with following specifications :-(a) Shutters side frame (Handle) :CAT No.-8903, Weight - 0.325 Kg/m,Make- Jindal (4Nos).(b) Shutters side frame:-CAT No.8902, weight-0.38 Kg/m, Make-Jindal (4 Nos).(c) Shutters top and bottom:- CAT No.8901,Weight-0.325 Kg/m,Make- Jindal 8 Nos)(d) Frame bottom:-CAT No.8688, Weight-1.07Kg/m, Make-Jindal (2 Nos) (e) Frame top and side :- CAT No. 8689, Weight-0.933 Kg/m, Make-Jindal (6 Nos)(f) Glazing:-5mm thick sheet glass of selected quality exc 0.50 sqm each pane fixed to aluminium frame incl solar control film 25 micron reflected type stacked to glass pane as per manufacturer instruction (for 2 Shutters) |
| 25 | S&F chromium plated curtain rod of medium weight and fixed brackets and decorative end supports etc complete all as specified and directed. |
| 26 | Demolition of cement Concrete (Unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all specified and directed by engr in charge |
| 27 | M&L for Non - skid white Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match |
| 28 | M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exc 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. (Note: colour and pattern of tile will be decided by GE/ Engr-in-charge. Contractor will brought the tiles only after approval of colour and pattern by GE/Engr-in-charge). |
| 29 | M&L for 25mm thickPCC type B-0, 1:2:4 (12.5mm graded aggregate) s in sub-base, sub-floors, pavings etc. |
| 30 | M&L for 20 mm thick Screed bed or bedding layer of cement mortar 1:6 for laying floor finishes complete all as specified. |
| 31 | Dismantling Timber scantling with framed work in fillets, rails, posts, rafters, purlins, etc. under 40 sq cmin section , in any position all as specified and directed. |
| 32 | M& L for cleansawn Second class hard-wood scantlings with framed work. |
| 33 | Supply and fixed 6 mm thick plywood, graded BWR, type BB fixed with nails to timber frame work fixed to ceiling surface etc complete all as specified and directed. |
| 34 | Supply and fixed 4 mm thick plywood , graded BWR, type BB fixed with nails to timber frame work fixed to ceiling surface etc complete all as specified and directed. |
| 35 | Material and labour fornewplywood and wood based materialsurfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 36 | Material and labour for preparation of old steel surfaces of any description not otherwise described over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed. |
| 37 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for all as specified and directed. |
| 38 | Material and labour for providing cement concrete 1:3:6 type C-2 using 40mm graded aggregate ) in plinth walls or retaining walls,drain walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) |
| 39 | M&L for Cement concrete type B-2, 1:2:4 (using 40mm graded agg) as in surface channels and drains complete all as specified and directed. |
| 40 | M&L for 75mm thick PCC type C-2, 1:3:6 (using 40mm graded stone agg) as in plinth protection complete all as specified and directed. |
| 41 | Taking down cement or cement lime plaster, any description incl racking out joints, hacking for key, scrubbing down with water etc. |
| 42 | M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces with CM 1:4 complete all as specified. |
| 43 | M&L for preparingplastered or unplasterd newly surface of any description with three coat of white wash on walls surfaces. |
| 44 | M&L for preparingplastered or unplasterd old surface of any description with two coat of white wash on walls surfaces. |
| 45 | M&L for preparation of new surfaces and applying two coat of synthetic enamel over a primingcoat onnew zinc (or galvanised ) surfaces to receive painting, by coating with mordant solution including washing and cleaning etc. of any description, not otherwise described, over 10 cm width or girth. |
| 46 | Supply and fix 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete, all as specified and directed |
| 47 | S& F for 30mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats |
| 48 | S&F2nd class hard wood30mm thick Glazed and skeleton shutters,divided into squared, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); supplied and fitted to chowkats |
| 49 | Supply & fix sheet glass 4mm thick ordinary quality and glazing with oil putty in squares n.exc 0.50 Sqm in each pane, complete all as specified and directed. |
| 50 | M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggragate as in subbase 40 mm thick complete all specified and directed by engr in charge. |
| 51 | M&L for screed bed or bedding layer of 15mm thick in cement mortar 1:4 for laying floor tiles etc all as specified. |
| 52 | Dismantling of floor, hearth or wall tiling including cement mortar bedding |
| 53 | Dismantling wall and ceiling boards of any description including cover fillets any thicknesscomplete all as specified and directed. |
| 54 | Material & labour for 2nd class hardwood plain fillets, square, rectangular or triangular in section, wrought, secured with nails having sectional area exc. 3 sqcm and n.exc 6 sqcm, complete all as specified and directed |
| 55 | Dismantling Timber scantling 40 sq cm and over in section , in any position all as specified and directed. |
| 56 | Demolition of Brickwork or stone/ boulder masonry, precast block walling, built in lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles |
| 57 | M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:4 Complete all as specified and directed by engr in charge. |
| 58 | M&L PCC 1:3:6 type C1 as in block masonry with solid blocks exc 10 cm in width and set in CM 1:6. complete all specified and directed. |
| 59 | M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggragate as in subbase 75mm thick complete all specified and directed by engr in charge. |
| 60 | M&L for red colour pigment chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in near cement slurry in floors with grey cement no pigment complete all specified and directed |
| 61 | M&L rendering 15mm thick in CM 1:4on concrete outer surfaces finished even and smooth without using extra cement . |
| 62 | M&L for Prepairing surfaces of wall plastered or unplastered newly surfaces with two coats of cement base paint over one coat of white wash as completed. |
| 63 | M & L for Glazed white ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match. |
| 64 | Demolition of Reinforced cement Concrete of any description and in any position not otherwise specifically provided for |
| 65 | M&L for precast cement concrete type B1 1:2:4( using 20mm graded aggregate) forlintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed |
| 66 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing. |
| 67 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm widthtuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of lain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheetbeading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 68 | M&L rendering 10mm thick in CM 1:6on concrete inner surfaces finished even and smooth without using extra cement . |
| 69 | S&F in Repair fancy type Bib taps 15mm size, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixedcompleta all specified and directed |
| 70 | S&F in repairsof Vitreous China Squatting pan \"Orissa pattern\" size 580 x440 mm white with integral foot rest.complete all specified and directed |
| 71 | S&F PVC (SWR) pipes 110mm dia single sockted in any length with rubber ring joints laid in trenches or floors. complate all specified and directed |
| 72 | M&L cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) to bed of drain pipes including packing under and haunching against the sides of pipes, after they are laid and tested for 110 mm bore pipe complete all as specified and directed |
| 73 | S&F PVC (SWR) bends any radius with access door, 110mm dia.complate all specified and directed |
| 74 | S&F PVC (SWR) bends any radius with access door, 75mm dia. complate all specified and directed |
| 75 | S&F PVC (SWR) junction single, (Single T) equal or unequal of dia110mm. complate all specified and directed |
| 76 | S&F PVC (SWR) pipes 75mm dia single sockted in any length with rubber ring joints laid in trenches or floors.complate all specified and directed |
| 77 | Taking up or down 15 mm bore steel tubing and connections. |
| 78 | Taking up or down 20 mm bore steel tubing and connections. |
| 79 | S&F of 20 mm dia 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. |
| 80 | S&F of 15 mm dia 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. |
| 81 | S&F Grating doom 100 mm dia with with waste hole of PTMT (mminium weight 25 gms) |
| 82 | S & Fin Repair 10 litres PVC, valve less, Syphonic action type, Flushing cistern low level, white with inlet ball valve float chain and pull and bracketscomplate all specified and directed |
| 83 | S&FPVC connection of 15 mm size withPTMT nuts of length 600 mm.complate all specified and directed |
| 84 | S&Fin repair of15mm Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed |
| 85 | S&Fvitreous china wash hand basin white flat back of size 550mmx400 mm including CI brackets and waste pipe complete all as specified and directed(Make: Hindware/Parry) |
| 86 | S & F in repair chromium plated 15mm dia pillar taps fancy type copper alloy with capstan heads,screwed down high pressure, with or without lettered \"hot or cold\" with long screwed shanks and fly nuts, screwed for iron pipe and fixed. |
| 87 | S&F 32mm dia waste coupling of PTMT (half or full threaded). (Minimum weight 32mm- 45gms/40mm-60 gms). |
| 88 | S & F in Towel rail 600mm long of PTMT fixed with and including chromium plated brass screws and wooden / plastic cleats |
| 89 | S & Flooking mirror 600 mm x 450 mm bevelled edge mirror or selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers .(Make :Swastic /Kohinoor /Gold fish /Atul) .complate all specified and directed |
| 90 | Dismantling water tanks exc 250 ltr but nexc 500 ltrs capacityand removing to store |
| 91 | S&F PVC water storage tanks of 500 ltrs capacity rotational moulded (multi layered cylindrical vertical with closed top) hoisted and fixed in position all as specified |
| 92 | S&F ball brass valves, high pressure, with polyethene float and flynut complete screwed for iron pipe of 20mm dia all as specified (Make:Jindal/Leader/Scico).complate all specified and directed |
| 93 | M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming toFe 290 Gde E-165 |
| 94 | S&F of Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc. coFe-410-W(Gde E-250) quality B |
| 95 | M&L for plain cement concrete 75mm thick type C-2, 1:3:6, (40mm graded stone aggregate) as in plinth protection, finishing cement concrete surfaces even and smooth without using extra cement. complate all specified and directed |
| 96 | Material & Labour for Point/fan wiring with 1.5 sq mm (nominal area), PVC insulated unsheathed (FRLSH), 1100 volts grade, multi-stranded copper conductor, in and including PVC casing capping of adequate size with all fittings and accessories including PVC boxes for housing the switches ( Make of box Prestoplast,Prestoteak), including PVC insulated and unsheathed (FRLSH)single core multi-stranded copper conductor cable of size 1.5 sq mm green in colour as earth continuity conductor connected to common earth dolly complete all as specified and directed. |
| 97 | All as per item No. 96 here in before One 3 pin socket outlet, 5 Amps on the same board with other switches, with cables 1.5sq. mm size |
| 98 | All as per item No. 96 here in before but for one 3 pin socket outlet 5 Amps three pin controlled by one switch on independent board complete all as specifieddirected. |
| 99 | All as per item No. 96 here in before but for one 5 pin socket outlet 15 Amp and 5 Amp Multipurpose independent using 4 Sqmm copper conductor cable (multi-strand) PVC insulated and unsheathed cable and 4 sqmm copper (multistrand) PVC insulated and unsheathed earth wire with terminal box of size 175mm x 100mm x 3.15mm complete all as specified. |
| 100 | S&FSocket outlet 2 in 1, 5 pin, 5amp flush type |
| 101 | S&FSocket outlet 2 in 1, 5 pin, 5 and 15 amp flush type |
| 102 | Supply & fixing switch piano flush type (ISI marked), single pole, one way 15 Amp, 240 Volts complete all as specified & directed. |
| 103 | Supply and fixing ceiling rose, surface bakelite, 65mm x 50mm ,two to three terminals complete all as specified & directed. |
| 104 | Supply & fixing switch piano flush type (ISI marked), single pole, one way 5 Amp, 240 Volts complete all as specified & directed. |
| 105 | Supply and fixing lamp holder, insulatted body with pack plate suitable batten fitting on wall duly grouted/fixed in solid block wall or on wooden boardcompleteall as specified and directed. |
| 106 | S&F LED lamp 9 Watt, CDL, B-22 cap, (Pin type), 230W, PF not less tha0.85 (min). Make- Havells/Crompton/Syska |
| 107 | S&F regel batten for LED Tube universal batten for G 13 T8 lamps including making electric connection from Ceiling Rose to tube light fitting including photon ultra plus LED Tubelight 20W (single side connection) Ultra bright LED Polycarbonate Tubelight with 10% THD with very high efficiency suited for installation in existing T8 Tubelight with G13 lamp holders to give glare free light with integrated electronic driver incl taking down old unsv one complete all as directed byEngr in Charge. |
| 108 | S&F LED bulkhead fitting 10 watt (Endura Ruby) with all accessories and including connenting up with 3 core twisted with flexible copper conductor cable with suitable size of 230 volts , 50 hz complete all as spicified and directed. |
| 109 | Supply and fix sheet metal enclosures for DBs duble door when MCBs to be used 230 volts 8 way 200 Amp rated busbarsingle pole and neutral fixed on wall duly grouted in solid block wall or on wooden board. |
| 110 | S&F MCB SPN having braking capacity 10KA, 32 Amps, 240V C curve complete all as specified and directed. |
| 111 | S&F MCB SP having braking capacity 10KA, 6 to 32 Amps, 240V C curve complete all as specified and directed. |
| 112 | Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5mtr below the normal ground level connected to galvanised wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron.Earth wire protected by GI pipe 15 mm bore(medium grade) and connected to main switch board or main control board as directed and as specified and shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 40 cm x 40cm x 5cm reinforced with 8mm dia TMT bars @ 15cm C/C with one handle for liftingmade out of 8mm dia bar, funnel, wire mesh, 20mm dia GI pipe medium grade for watering, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil and testing complete all as directed by Engineer-in-Charge. |
| 113 | S&F of new generation energy saving and environmental friendly long life LED building securitylight made up of innovative die cast aluminium housing high power LED as lighting source with IP - 66 power consumption 35 watt complete input voltage of 150-240 Volt (nominal rated voltage 240 Volt) complete including twisted 3 core copper cable of size 1.5 Sqmm dia for connecting phase, neutral and earth from ceiling rose to light length as required at site,GI bracket 32 mm dia pipe and 02 numbersclmaps, all fixing arrangements such as fastners, bilts, nuts washers etc all as specified and directed. |
| 114 | S&F in replacement of 1100 Volts grade heavy duty ISI marked cable PVC insulated stranded aluminium conductor one twin core cable flat or circular of size 16 sqmm served with inner sheathing of PVC tape & overall PVC sheathed in service connections etc |
| 115 | Taking down point wiring carefully copper/ aluminum (light,fan, socket or power) complete (fittings such as switches ceiling rose, pendents, regulators, sockets etc) |
| 116 | Taking down main switches, DBs alongwith existing board and removing the same from the site and making good the disturb surfaces / Portion of the wall etc all specified and directed by EIC. |
| 117 | Taking downservice wiring of any type and size and discription incl removal from DBs etc and removal of the same from site and making good the disturb surfaces or portion of wall/ceiling etc complete all as specified and directed by EIC. |
