|
| 1 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. |
| 2 | a) Group \"A\" |
| 3 | Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
| 4 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire. |
| 5 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. a) 20mm |
| 6 | Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required. (a) 100 mm X 100 mm X 60 mm deep |
| 7 | (b) 180 mm X 100 mm X 60 mmdeep |
| 8 | Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. (a)5/6 A switch |
| 9 | (b) 15/16 Amp Switch |
| 10 | (c) 3 pin 5/6 A socket outlet |
| 11 | (d) 3 pin 15/16 A socket outlet |
| 12 | (e) TV antenna Socket Outlet |
| 13 | Supplying and fixing 230 V 50 Hz 5 stepped type electronic fan regulator (Anchor deluxe) on the existing switch box including connections etc. as required. |
| 14 | Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. |
| 15 | Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, \"C\" curve including connections, painting etc. as required. |
| 16 | Supplying and fixing PVC batten/ angle holder including connections etc. as required. |
| 17 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). (a) 8 way , Double door |
| 18 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts 10kA, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. (a) Single pole |
| 19 | (b) Double pole |
| 20 | Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. |
| 21 | Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required. |
| 22 | Supply, Installation, Testing and Commissioningof 1200 mm sweep, ceiling fan , class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, , Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%,electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC S, Make of havells/ Orient/Bajaj/Crompton(Before the installation of Fan approval will be have to be taken from the engineer in-charge) |
| 23 | Supplying and fixing of 300 mm sweep, 35-50 Watt, plastic body exhaust fan single phase 1200 rpm and including Gravity Shutter makehavells/ Orient/Bajaj/Crompton .(Before the installation of Ex-Fan approval will be have to be taken from the engineer in-charge) |
| 24 | Supplying and fixing of decoretive wall light fitxture made up polycarbonate i/e Suitable for LED Lamp B 22base Havells make cat no. City 2-LHDL06160099 with 9 Watt LED Lamp, including connection and earthing etc as reqired.(Before the installation of fixture approval will be have to be taken from the engineer in-charge) |
| 25 | Supply, installation, testing and commissioning of 20 Watts, 230 V, 50 Hz,Decorative ultra slim polycarbonate LED Tube Light fixture with high lumen output, high wattage PC Batten, environmental friendly,energy efficient ready to use pack.Make Havellas/crompton/HPL etc.(Before the installation of Tube light approval will be have to be taken from the engineer in-charge) |
| 26 | Supplying and fixing LED ADORE PLUS 10 W E27 CDL 2 Star Lamp in existing holder includingtesting etc. as required.Make -Make Havellas/crompton/HPL etc. (Before the installation of Lamp approval will be have to be taken from the engineer in-charge) |
| 27 | supplying and fixind 30-45 W LED 6500 K,environmentalfriendly, energy efficient ready to use Street Lights with best in class design & Robust heat sink along with class leading IP66, IK & Surge protections for long lasting performancewith iron angle rod including welding and bending etc as required.make Havells/Phillips/Surya/Crompton etc. (Before the installation of Street light approval will be have to be taken from the engineer in-charge) |
| 28 | Design,composition, supplying and fixing of glow sign board of size 15 feet x 3 feet area. Structure made with iron square pipe of size 1\" x 1\" and painted with red oxide primer & two coat of synthetic enamel paint. All side covered with galvanized plain sheet, minimum 12 NOs LED tube light fitted insideboardand connection with 1.5 sq mm PVC insulated FRLSH cable make Havells. Edge of box made with aluminium angle of size minimum 1\" x 1\" to give an aesthetic appearance.Graphics on one side of board written on acryllic sheet by pasting computer cutting vinyl paper alongwith BSF & FTR M&C monogram printed on it.(Word written on glow sign board is provided by Engg-in-Charge) |
