|
| 1 | Demolition of reinforced cement concrete in any positionnot exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 2 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed |
| 3 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) exc 1.5 Sqm but n.exc 4 Sqm each complete all as specified and directed. |
| 4 | M&L for cement concrete Type D2 1:4:8 (40mm graded aggregate) in foundation filling and mass concrete complete all as specified and directed. |
| 5 | S&F M.S Framed work such as grills gratings etc with ends of bars sholdered and/or riveted into spikes ,framed guard bars /railings complete all as specified and directed. |
| 6 | S&F Hard drawn steel wire fabric cut to length, bent to shape required and tying with and including mild steel wire (annealed) not less than o.9mm dia weight not exceeding4.00 kg per sqm including welding to existing frame work complete all as specified and as directed. |
| 7 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 8 | M & L, Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour (as approved by GE) having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws in single length including taking down of existing roof sheet complete all as specified and directed. |
| 9 | S&F galvanised mild steel wire cloth 0.56 mm nomonal dia of bar and 1.18 mm avrage width of aperture ,fixed with tined tacks or galvanised wire staples complete all as specified and as directed. |
| 10 | M&L, preparing of new steel surfaceexceeding 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 11 | M&L for PCC 1:2:4 type E-2 (using 40 mm graded stone aggregate) as in subbase of floors etc, complete all as specified and directed. |
| 12 | M & L for non skid tiles, exterior grade, pattern of size 300x300mm, 8-10mm thick set and jointed in neat cement slurry and pointed in white/ coloured cement to match the shade as in floor over and including 15mm thick cement screed bed in CM 1:4 complete all as specified and as directed. |
| 13 | M&L for non skid ceramic coloured tiles Edge cut 7 to 8 mm thick (Square/rectingular)area of each tiles exceeding 0.11 Sqm but not exceeding0.18 Sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to matchincl screeding 15mm thick in CM 1:6 anddismantling of existing tiles complete all as specified and directed. |
| 14 | M&L for machine cut kota stone slab flooring 18-20 mm thick with white marble all arond 150mm wideover and including 15mm thick cement screed bed in CM 1:6 laidand jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror finshedpolishing in complete all as specified and directed. |
| 15 | M&L for machine cut kota stone slab, 18-20 mm thick in riser and thired single piece on steps, skirting, dado and pillar laid over and including 10mm thick rendering in CM 1:4 including grinding and mirror finshed polishing complete all as specified and directed. |
| 16 | M&L Glazed coloured ceramic tiles 450 x 350 x 7 mm to 8 mm thick on vertical surfaces, set and jointed in neat cement slurry and pointed in coloured cement to match colored tiles over 10mm thick in CM (1:4) on brick or concrete surfaces offinished rough to receive the glazed tiles of any description or thickness in walls complete all as specified and directed. |
| 17 | Dismantling of stone slabs and tiles of any description or thickness in floors, approachs, dado/Partitionsetc complete all as specified and as directed. |
| 18 | M&L for 18 to 20 mm thick Green Marble work(table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, wash basin platformand like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including rounding exposed edges complete all as specified and as directed. |
| 19 | Demolition of precast concrete articles and pre-cast cement concrete block walling, ashlar fencings, dressed stone work including all quoins, arches, pillars etc. built in cement mortarcomplete all as specified and directed. |
| 20 | Taking down old cement plaster any description on brick or stone wall/ceiling etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 21 | M&L for brick work with sub class `B\" bricks straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed. |
| 22 | M&L for 15 mm thick cement plaster on fair faces of brick work or concrete surfaces on wall in CM 1:4 finished the plaster surfaces fair and even complete all as specified and directed. |
| 23 | M&L for 15 mm thick cement plaster on fair faces of brick work or concrete surfaces on wall in CM 1:6 finished the plaster surfaces fair and even complete all as specified and directed. |
| 24 | M&L for applyingtwo coat OBD on newly plastered wall with airless electric sprayers over a coat of primer applied using airless electric sprayers over one coats of wall care putty of 1-1.5mm thickness prepared and sanded with electrically operated sanding machine. application tobe done through the authorised applicator of manufacturer complete all as specified and directed. |
| 25 | M&L for applyingtwo coat exterior emulsion paint (weather coatof Berger or equivelent ) on newly plastered wall with airless electric sprayers over a coat of primer applied using airless electric sprayers over one coats of wall care putty of 1-1.5mm thickness prepared and sanded with electrically operated sanding machine. application to be done through the authorised applicator of manufacturer complete all as specified and directed. |
| 26 | Supply & Fix GI powder coated snap grid frame work for false celling comprising of the following sections for making partitions of 600x600 mm size fixedto walls with rawl plugs & screws and hanged to roof with and including 4mm dia GI wire suspender of suitable length complete all as specified and as directed :- (i) main tee of size -32mmx24mmx0.3mm (ii) cross tee of size -26mmx24mmx0.3mm(iii) wall angle - 24mmx24mmx0.3mm |
| 27 | S & F 4 mm thick E-Board classic for, 595 x 595 mm size fixed with staples on snap grid as in ceilingcomplete all as specified and as directed. |
| 28 | S&F 1.25 mm thick Pressed steel frame size 105 x 60 for doors with one or more rebates including necessary fixing lugs,hinges ( 125 mm long-06 Nos & 75mm long - 2 Nos for each door ), lock strike plate, hold fastetc., including Frames shall be filled with PCC 1:3:6, type C-0 (12.5 mm graded stone aggregate)complete all as specified and directed. |
| 29 | M&L for PCC 1:3:6 type C-1 using 20mm graded stone for embedding of hold fast etc complete all as specified and directed. |
| 30 | Supply & Fix 35 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed. |
| 31 | S&F mild steel barrel tower bolt stove enameled black 200 mm size with bright bolt complete all as specified and directed. |
| 32 | S&F mild steel pressed handle oval type150 mm size, stove enameled black complete all as specified and as directed . |
| 33 | Supply & Fix 300mm longMild steel sliding door bolt , plate type stove enamelled black with bright not less than 16mm dia with and including minimum of 6 bolts and nuts four on plate and two on staples plat and fixed complete all as specified and directed. |
| 34 | M&L, preparing of new wooden surfaceexceeding 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed. |
| 35 | S&F Steel windows with side hung shutters including Box type hinges with steel handle, and steel tower bolt complete with glazing bars, dovetailed or weldedcomplete all as specified and directed. |
| 36 | S&F Steel windows with side hung shutters including Box type hinges with steel handle, and steel tower bolt, complete with out glazing bars, dovetailed or welded complete all as specified and directed. |
| 37 | S&F galvanised mild steel wire cloth 0.56 mm nomonal dia of bar and 1.18 mm avrage width of aperture ,fixed with tined tacks or galvanised wire staples complete all as specified and as directed. |
| 38 | M&L, preparing of new steel surfaceexceeding 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 39 | S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc 0.5 Sqm in each pane complete all as specified and directed. |
| 40 | S&F in repairs curtain rod made of SS pipedia of rod 25 mm withdecorative brackets andends complete all as specified and as directed. |
| 41 | S & Frotational moulded polyethylene three layered water storage tanks 1000 Litres capacity (cylindrical, vertical with closed top) hoisted and fixed in position all as specifiedcomplete all as specified and directed. |
| 42 | S&F 15 mm bore tubes medium grade galvanised with all fittings and fixed to walls, ceilings or laidconcealed in floors incl cutting chases where required complete complete all as specified and directed |
| 43 | S&F 20 mm bore tubes medium grade galvanised with all fittings and fixed to walls, ceilings or laid concealed in floors incl cutting chases where required complete complete all as specified and directed |
| 44 | S&F 20mm Gate valves with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed.. |
| 45 | S&F bib taps cast copper alloychromium plated fancy type with crutch or butterfly handle screw down ,screwed for iron pipe or or brass ferrule for 15 mm bore of pipe complete all as specified and directed. |
| 46 | S&FStop valves/ Angle valves cast copper alloychromium plated fancy type with crutch or butterfly handle screw down ,screwed for iron pipe or or brass ferrule for 15 mm bore of pipe complete all as specified and directed.. |
| 47 | S&F 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and directed.. |
| 48 | M&L RCC M-25 (Design Mix) as in foundation, including raft, footings, foundation beams, plinth beams, bases for columns etc complete all as specified and as directed. |
| 49 | M&L RCC M-25 (Design Mix) as in beams, cantilever, lintels etc complete all as specified and as directed. |
| 50 | M&L form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, plinth beams or similar works vertical or to batter for rough finished surface of concrete complete all as specified and directed. |
| 51 | M&L form work to sides and soffits of roof beams, lintels lever shelves incl supports over hang etc rough finished surfaces of concrete flat complete all as specified and directed. |
| 52 | M&L mild steel TMT bars 10mm dia and over, cut to length, bent to shape required incl cranking, bending spirally for hoping for columns hooking ends and bindind with ms wire (annealed) not less than 0.9mm dia quality confirming complete all as specified and directed. |
| 53 | M&L for 75 mm thick cement concrete 1:3:6 type C2 (using 40 mm graded Stone aggregate in plinth protectionfinisheed even and smooth without using extra cement including forming necessary joints 12 mm wide to the full depth of PCC at every 3 metre and at change complete all as specified and directed. |
| 54 | M&L, precast cement concrete Block Masonary with solid blocks type C1, 1:3:6(20mm graded stone aggregate) exc 10 cm in width and setting in mortar 1:6 complete all as specified and directed . |
| 55 | Taking down carefully Copper/Aluminiumpoint wiring (Light ,fan, socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators, sockets etc), removing unserviceable or serviceablematerials from siteand making good the disturbed surface of walls, floors etc, complete all as specified and directed. |
| 56 | M&L for point wiring Concealed with 1.5 Sqmm, single core (FRLS), PVC insulated with multistranded unsheathed copper conductor cable including rigid non- metallic PVC surface / concealed conduit 20 mm or higher dia, light grade ISI marked complete with all PVC conduit accessories / fittings and sunk switch boxes with 3 mm thick plastic laminated hard glossy surface sheet (white) top cover, including continuous earth wire ofPVC insulated, unsheathed, green in colour 1.5 Sqmm multistrand copper conductor (FRLS) connected to all fittings, sunken boxes and common earth and connected to earth dolly, screwed with Brass screws, cup washers complete all as specified and directed for :- One light point/Fan point controlled by one, one way switch of 5/6 Amps. |
| 57 | All as per item No. 56 but for One 3/5 pin socket outlet 5/6Amp on same board with other switch of 5/6 Amp complete all as specified and directed. |
| 58 | All as per item No. 56 but for One 3/5 pin 5/6 amps socket out-let point on independent board controlled by one, one way switch of 5/6 amps on independent board complete all as specified and directed. |
| 59 | All as per item No. 56but with 2.5 Sq mm cable (FRLS) for one 15/16 Amp socket outlet controlled by one switch on independent board and 2.5 Sqmm PVC insulated unsheathed multi stranded copper conductor cable as continuous earth wire complete all as specified and directed. |
| 60 | S & F, Modular Switch flush type, whitefinish,5/6 amps, single pole, one way complete all as specified and directed. |
| 61 | S&F Modular Switch, whitefinish,15/16 amps, single pole, one way,complete all as specified and directed. |
| 62 | S&FModular Socket outlet 3 pin, 5/6 amps and 2 pin 5/6 amps with sutter,complete all as specified and directed. |
| 63 | S&F Modular Socket outlet two in one 3 pin 5/6 amps and 3 pin 15/16 amps (multipurpose), with shutters,complete all as specified and directed. |
| 64 | S&F ceiling rose, surface bakelite, AC, 220/240 volts, 3 terminals, complete all as specified and directed. |
| 65 | S & F white cover plate with frame modular type of 02 module complete all as specified and directed. |
| 66 | All as per item 65herein above but of 03 module complete all as specified and directed.. |
| 67 | All as per item 65 herein above but of 04 module complete all as specified and directed.. |
| 68 | All as per item65 herein above but of 06 module complete all as specified and directed.. |
| 69 | All as per item 65 herein above but of 08 module complete all as specified and directed.. |
| 70 | S & F metal flush box modular type of 02 module complete all as specified and directed. |
| 71 | All as per item 70 herein above but of 03 module complete all as specified and directed. |
| 72 | All as per item 70 herein above but of 04 module complete all as specified and directed. |
| 73 | All as per item 70 herein above but of 06 module complete all as specified and directed. |
| 74 | All as per item 70 herein above but of 08 module complete all as specified and directed. |
| 75 | Supply and FixingLED Bulk head Fitting environment friendly , IP-65/66, ultra modern,energy saving,surface mounting,decorative oval comprising of high brightness LED 10 Watt, 6000 Kcomplete all as specified and directed. |
| 76 | Supply and fixing LEDIntegrated Batten T5box type surface mouted, (1x20 Watt) prewired including electric electrical connection with PVC insulated twin twistedcopper wire of size 0.75 Sqmm from ceiling rose to tube light fitting and including taking down old fitting complete all as specified and directed. |
| 77 | S&F recess mounting LED 2x2 luminaire 36W,6500Kslim ceiling light with extruded aluminium housing and milky diffuser complete and including taking down old fitting complete all as specified and directed. |
| 78 | S&F Sub main wiring with two single run of 6 Sqmm (Normal cross sectional area) of single core unsheathed PVC insulated cable, 1100 volts grade multi stranded copper conductordrawn through with & including conduit of 25 mm dia or higher dia with and including necessary conduit accessories, surface/concealed type including 6 Sqmm stranded copper conductor PVC insulated cable as earth wire connected to common earth dolly,including taking down complete all as specified and directed. |
| 79 | S&F in repair MCB DB sheet metal enclosure for DB, SPN, 8 way having protectionwith 200 amps rated bus bar, 240 volts, double door type, suitable for housing MCB\"s and isolators,concealed in wallcomplete all as specified and directed. |
| 80 | Supply and Fix for in repair of MCB single pole, 240 volts, 6-32 Amps of 10 KA complete all as specified and directed. |
| 81 | Supply and Fix in repairMCB single pole & Neutral 240 volts, 40 amps,of 10 KA complete all as specified and directed. |
