Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 06-03-2025 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 13-03-2025 |
| 2 | 24-02-2025 | Corrigendum No 02 | Date | 06-03-2025 |
| 3 | 24-02-2025 | Corrigendum No 01 | BOQ | 06-03-2025 |
| Sl. No. | Item Description |
| 1 | M & L Digital glazed ceramic coloured tiles of size 300x600x7 to 8mm on vertical surface as in dados, skirting etc, set and jointed in neat cement slurry over and including 10 mm thick bedding layer using type-I adhesive (thick bed fixing) confirming to IS-15477:2004 and pointed in white or coloured epoxy grout to match the shade of tile includingnecessary cutting as per site requirement including demolition of old tiles any type complete all as specified and as directed by Engineer-in-Charge.Note:-10 mm thick bedding layer on using type-I adhesive (thick bed fixing) confirming to IS-15477:2004 shall be measured and paid seperately. |
| 2 | M & L forNon skid ceramic coloured tiles 600x 600x 8mm in floors etc,jointless,set and jointed in neat cement slurryover10 mm thick bedding layer using type-I adhesive (thick bed fixing) confirming to IS-15477:2004 and pointed in white or coloured epoxy grout to match the shade of tile includingnecessary cutting as per site requirement including demolition of old tiles any type complete all as specified and as directed by Engineer-in-Charge.Note:-10 mm thick bedding layer on using type-I adhesive (thick bed fixing) confirming to IS-15477:2004 shall be measured and paid seperately. |
| 3 | M & L for coloured digital glazed tiles, 9 to 10 mm thick (square / rectangular), polished, size area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, as approved by GEin floors etc set and jointed in neat cement slurry and pointed in coloured cement to match the tilesover 10 mm thick bedding layer using type-I adhesive (thick bed fixing) confirming to IS-15477:2004 and pointed in white or coloured epoxy grout to match the shade of tile includingnecessary cutting as per site requirementincluding demolition of old tiles any type complete all as specified and as directed by Engineer-in-Charge.Note:-10 mm thick bedding layer on using type-I adhesive (thick bed fixing) confirming to IS-15477:2004 shall be measured and paid seperately. |
| 4 | M & L for coloured digital glazed tiles, 9 to 10 mm thick (square / rectangular), polished, size area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, as approved by GEasin skirting, dados over 10 mm thick bedding layer using type-I adhesive (thick bed fixing) confirming to IS-15477:2004 and pointed in white or coloured epoxy grout to match the shade of tile includingnecessary cutting as per site requirement including demolition of old tiles any type complete all as specified and as directed by Engineer-in-Charge.Note:-10 mm thick bedding layer on using type-I adhesive (thick bed fixing) confirming to IS-15477:2004 shall be measured and paid seperately. |
| 5 | S&F 18-20 mm thick any colour of marble work(table rubbered and polished) in floor, cooking plateformincluding pointing in white cement (1:2) using marble dust with admixture of pigments to mortar the colour otherincluding 10 mm thick bedding layer using type-I adhesive (thick bed fixing) confirming to IS-15477:2004 and pointed in white or coloured epoxy grout to match the shade of tile includingnecessary cutting as per site requirement including demolition of old stone any type complete all as specified and as directed by Engineer-in-Charge.Note:-10 mm thick bedding layer on using type-I adhesive (thick bed fixing) confirming to IS-15477:2004 shall be measured and paid seperately. |
| 6 | M&L for granite (any type) 20 mm thick work(table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, counter, shelves, urinal partition and like in cement mortar )over10 mm thick bedding layer using type-I adhesive (thick bed fixing) confirming to IS-15477:2004 and pointed in white or coloured epoxy grout to match the shade of tile includingnecessary cutting as per site requirement including demolition of old stone/tiles any type , moulding/rounding on edges by grinding complete all as specified and as directed by Engineer-in-Charge. Note:-10 mm thick bedding layer on using type-I adhesive (thick bed fixing) confirming to IS-15477:2004 shall be measured and paid seperately. |
| 7 | M&L for Endura tiles/ stone (coloured/designer) heavy duty of size 300mmx300mm, 10-12mm thick, as in floor, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over10 mm thick bedding layer using type-I adhesive (thick bed fixing) confirming to IS-15477:2004 and pointed in white or coloured epoxy grout to match the shade of tile includingnecessary cutting as per site requirementincluding demolition of old tiles any type complete all as specified and as directed by Engineer-in-Charge.Note:-10 mm thick bedding layer on using type-I adhesive (thick bed fixing) confirming to IS-15477:2004 shall be measured and paid seperately. |
| 8 | Material and labour for 10 mm thick bedding layer on using type-I adhesive (thick bed fixing) confirming to IS-15477:2004 for wall/floor tilescomplete all as specified and as directed by Engineer-in-Charge. |
| 9 | Supply and fixing Gl powder coated frame work 605 mm X 605 mm for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre and duly suspended with 4mm GI wire hangers (upto 1200 mm length) adjusting level fixed to roof slab by means of ceiling cleats made of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long including providing 600x600x10-12mm thick ceiling mineral fibre board in grid fixed in false ceiling grid as per above specifications including taking down old ceiling complete all as specified and as directed by Engineer-in-Charge. |
| 10 | S&F 20 mmCPVC pipe sdr11and plain CPVC sdr11 fitting with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm i complete all as specified and directed including taking down existing GI tubing complete all as specified and directed by Engr-in-Charge |
| 11 | S&F 16 mmCPVC pipe sdr11 and plain CPVC sdr11 fitting with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified and directed including takingdown GI tubing complete all as specified and directed by EIC |
| 12 | S&F Single piece slim concealed Cistern with floor mounting frame, installation kit and S Type drain pipe connected set for wall Hung WC (Without flush control plate ) complete CAT Part No- JCS-WHT-2400S and Control plate Opal complete CAT Part No - JCP-CHR-152415 of Jaquar Customer Guide Vol 15A or Equivalent . |
| 13 | S&FRIMLESS wall hung WC size 400mmx500mmx370mm with UF soft cose seat cover including all fittings/ accessories set complete all as specified and directed by Engr-in-Charge. |
| 14 | S & F in repair health faucet including accessories complete all as specified and directed. |
| 15 | S&F in repair Toilet Roll Holder with Stainless Steel Flap complete |
| 16 | S&F 805mmx465mm Wash hand basin with cabinet and accessories of selected quality approved by Garrison Engineer with fixing accessories set complete all as specified and directed by Engr-in-Charge. |
| 17 | Supply and fixedAquisense SENSOR Faucet (Pillar Cock) for Wash Basin with base flangecomplete all as specified and directed by Engr-in-Charge. |
| 18 | Supply and fixed SENSOR Urinal with fixing accessories complete set, of sixe 37cmx39cmx61 cm SENSOART built in sensor of pastel complete all as specified and directed by Engr-in-Charge. |
| 19 | S&FCP bottle trap for WHB/Urinal outlet of standard quality and size complete all as specified and as directed. |
| 20 | S&F Soap dish complete |
| 21 | S&F Towel Ring Round complete |
| 22 | S&F in repairSingle Towel Rail 600mm long complete |
| 23 | S&F Glass shelf 550mm long complete |
| 24 | S&F Corner Glass Shelf (With Bracket) |
| 25 | S&F Liquid Soap dispenser with Glass Bottle complete |
| 26 | S&Flooking mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood , fancy type PVC moulded beading alround and fixed to wooden plugs with chromium plated brass screws and cup washerscomplete all as specified and directed. |
| 27 | S&F towel rack of 600mm long CP fancy type of standard quality and size complete all as specified and as directed. |
| 28 | S&F in repair Bib cock with wall flange complete all as specified and directed by Engr-in-Charge. |
| 29 | S&F15 mm bore 2 way bib cock with flange , chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferulle and fixed complete all as specified and directed. |
| 30 | S&F in repairs 15 mm bore stop cock,(angle valve) with flange single levercast copper alloy, fancy type, chromium plated, screwed down, high pre-ssure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 31 | S&F telephonicwallMixer single lever for mixing hot and cold water screwed down, high pre-ssure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 32 | S&F shower pannel 1600mmx230mm stainlell steel body, movable ABS top shower, hand shower with flexible hosecomplete all as specified and directed. |
| 33 | S&F in repair PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified & directed. |
| 34 | S&F in repair1000 Ltr rotational moulded polyethylene water stotage tanks ( cylinderical verticle with closed top) hoisted & fixed in position including taking down old tank complete all as specified and directed. |
| 35 | S&F 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed. |
| 36 | S&F in repairs 20 mm bore gun metal or gate valves, with iron wheel head, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 37 | S&F Toughned glass superior quality (Frosted) of 10mm thick high quality glass used asBath Cabin, door shutter, partition for Doors,Urinal and WC area including necessary accessories ie hinges, angle for fixing, complete all as specified and directed by Engineer-in-Charge.. |
| 38 | M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6m meanradius, built in, built in CM 1:6 including demolition of old brick complete all as specified and directed. |
| 39 | Taking down cement plaster on brick or concrete surfaces , including racking out joints , hacking for key, scrubbing down with water complete all as specified and directed. |
| 40 | M&L15mm thick rendering in CM 1:6 on brick/concrete surfacesincluding finishing the surfaces even and smooth (without using extra cement) complete all as specified and directed. |
| 41 | M&L 15mm thick rendering in CM 1:4 on brick/concrete/stone masonry surfaces including finishing the surfaces even and smooth (without using extra cement) complete all as specified and directed by Engr-In-Charge. |
| 42 | M&L for 10mm thick rendering in cement mortar 1:3 on concrete surfaces as in ceiling, chajjas including finishing the surfaces even and smooth without using extra cement complete all as specified and as directed. |
| 43 | Preparation of newly plasteredsurfaces of walls and applying 02 coats of interior emulsion paint (lightshade) @ 10 sq.m/litre/2 coats by using roller/brushto wall surfaces over & including a coat of interior wallprimer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed. |
| 44 | Preparation of new plastered surfaces and applying 02 coats of exterior emulsion paint (light shade) with highlighter of any approved shade,@ 5 sq.m/litre/2 coats by using roller to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer @ 11 sq.m/litre/1 coat as recommended for under coat by manufacturer of exterior emulsion by using following brands of emulsion and primer complete all as specified and directed. |
| 45 | Preparation ofnew plastered surfaces and applying 02 coats of interior emulsion paint (lightshade) @ 10 sq.m/litre/2 coats to ceilings surfaces over & including a coat of interior primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed. |
| 46 | Applying acrylic thick wall care putty on internal /externalsurfaces of walls/ceilings (thickness vary from 1.5 to 2.5 mm as required for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving exterior painting complete all as specified and directed.Notes : (i) The prepared surface after wall putty, the contractor will inform to the GE as well as to the Engineer-in-Charge for site inspection before applying further external finishes. Please note that the further external finishes work will start only after approval of the prepared surface from the GE as well as to the Engineer-in-Charge through site order. |
| 47 | M&L for complete removal of oldsurfaces and applying 02 coats of interior emulsion paint (light shade) @ 10 sq.m/litre/2 coats by using roller/brush to wall surfaces over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed. |
| 48 | M&L for complete removal of old surfaces and applying 02 coats of interior emulsion paint (lightshade) @ 10 sq.m/litre/2 coats to ceilings surfaces over & including a coat of interior primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed. |
| 49 | M&L for complete removal of old surfaces and applying 02 coats of exterior emulsion paint (light shade) with highlighter of any approved shade,@ 5 sq.m/litre/2 coats by using roller to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer @ 11 sq.m/litre/1 coat as recommended for under coat by manufacturer of exterior emulsion by using following brands of emulsion and primer complete all as specified and directed. |
| 50 | Taking down chowkhats or frame exc 1.5 sqm but nexc 4.00 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed. |
| 51 | Taking down chowkhats or frame nexc 1.5 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed. |
| 52 | Supply & fixing powder coated, anodised aluminium window/ventilator shutter side hung type without sash bars, made out of aluminium section weighing 0.55 Kg/mtr, powder coated (minimum thickness of powder coating not less than 50 micron) including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21, 100mm long (2 No. for ventilator and 3 Nos for window each shutter) suitable handle (1 No.), including fixing of glass, including taking old unserviceable shutter with fittings, complete all as specified and directed by Engineer-in-Charge.Note :- (i) Aluminium chowkhat frame shall be measured and paid separately under appropriate item of BOQ as supply and fixing. (ii) Glass and other filling material in panels shall be measured and paid separately under appropriate item of BOQ as supply only. |
| 53 | Supply & fixing powder coated aluminium frame for partition doors, windows and ventilators with one or more rebates including jointing cleat for fixing etc. and aluminium anodised skelton windows & ventilator shutter fixed with glass or gauge, side hung type without sash bars using standard aluminium section including necessary aluminium grill, jointing cleats, glazing clips, rubber packing anodised aluminium snap beadings screws, anodised aluminium fittings such as handles stainless steel adjustable friction stay hinges etc. including aluminium grills fixed to window frame aluminium anodised wire cloth fixed to aluminium frame, complete all as specified and directed by Engineer-in-Charge.Note :- (i) Payment under this item will be make only for the cost of aluminium section. However unit rate quoted shall deemed to include cost of rubber beading, fittings such as handles, SS friction stay hinges and fixing of 5mm thick glass etc.(ii) Supply and fixing 5mm thick sheet glass and aluminium wire cloth be measured and paid separately(iii) Weight of aluminium handle & SS hinges shall not be accounted for payment purpose. |
| 54 | Supply and fixedpowder coatedaluminium door shutters (Minimum thickness of powder coating 50 micron), aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, tower bolt , aluminium snap beading, screws etccomplete all as specified and directed by Engr- In-Charge. |
| 55 | S&F stainless steel glass door handle \"H\" handle of size 300mm longcomplete all as specified and directed by Engr- In-Charge. |
| 56 | S&F Sheet glass, selectedquality figured glass,obscured and glazing with aluminium beads in square of any size 6mm thick including itching or design printing on glass completeall as specified and directed by Engr- in- Charge. |
| 57 | S&F Sheet glass, selectedquality black tinted, and glazing with aluminium beads in square of any size 5.5 mm thick all as specified and directed by Engr- in- Charge. |
| 58 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperure 1.40 mm and fixedwith stainless steel wire staples fixed complete all as specified and directed. |
| 59 | Supply and fixing ACP sheet 6mm thick of approved colour fixed to aluminium door, partition and likecomplete all as specified and directed by Engr- In-Charge. |
| 60 | M&L Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixedcomplete all as specified and as directed. |
| 61 | S&F Mortice lock alumunium body, vertical type of size 100mm of 4 levers etc compete all as specified and as directed. |
| 62 | M&L for 40mm thick flush shutters, solid core construction, with block board core and plywood face panels, both face is covered with decorative face veneer with lipping/frame to match compete all as specified and as directed. |
| 63 | S&F 100 mm mild steel butt hinges medium weight,cold rolledcomplete all as specified and directed. |
| 64 | S&F 125 mm Aluminium handles, cast type, anodisedcomplete all as specified and directed. |
| 65 | S&F 200 mm Aluminium anodised barrel tower bolts extruded section and fixed complete all as specified and directed. |
| 66 | Material and labour for preparation of new/ old polished wooden surfaces of any description not otherwise described over 10cm width or girth & applying two coats of french polishing to achieve glossing finish upto entire satisfication, including a coat of wood filler complete as specified and as directed as per existing or as approved tint/colour complete all as specified and as directed by Engineer-in-charge. . |
| 67 | S&F mild steel work as in Framed work as in doors or gates of angle or other sectionwith gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete complete all as specified and directed by Engr-in-Charge. |
| 68 | Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5m in depth and getting outin Soft/loose soil. |
| 69 | Removingexcavated material exc. 250 m but n exc. 500 m and depositing where directed. |
| 70 | Returning filling in including spreading levelling watering and well ramming in layers n. exc 25 cm complete all as specified and directed. |
| 71 | M&L forcement concrete 1:4:8 type D-2 (using 40 mm graded stone agg) as infoundation , filling, subbase and mass concrete complete all as specified and directed. |
| 72 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams;and similar work; vertical or to batter complete all as specified and directed. |
| 73 | Formwork to sides of pillars,posts, struts, piers, columns and stanchions complete all as specified and directed. |
| 74 | M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and bindingwith and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 75 | Ditto, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed. |
| 76 | M&L for reinforced cement concrete M-25 (designmix) as in Foundations, including rafts, footings, foundation beams;plinth beams; bases for columns, etc.; basement slabs,under-reamed piles and mass concrete complete all as specified and directed. |
| 77 | M&L for reinforced cement concrete M-25 (designmix)as in Columns, pillars, piers, posts and struts complete all as specified and directed. |
| 78 | M&L forDholpur stone louvres and jallies (Jaffery), 25mm thicksize and shape, design as approved by GE including all mouldings fixed in cement concrete along the road side inluding necessary excavation and cement concrete complete all as specified and as directed by Engr-in-Charge. |
| 79 | M&L preparation of new/oldsteel surfaces & applying two coats of synthetic enamel paint over one coat of red oxide primer over 10cm width or girth all as specified. |
| 80 | Supply and fixing 110 mm bore PVC (SWR) pipe type -B single socketed in any length with rubber ring joint fixed to walls 100mm away from wallwith projected galvanised MS clamps at a interval of 1.5 Mtr as specified, and also repair to blow holes / spouts and mouth of pipe for leak proof purpose (anysize and pettern), including all fittings, compete all as specified and as directed. |
| 81 | S & F 75 mm bore of pipe PVC (SWR) type B pipes single socket in any length with rubber ring joint fixed to walls with GI Brackets/Clamps at a distence of 100-120mm away from wallsas directed 6 Kg/Sq cm including taking down of exisiting pipe of any type and description complete all as specified and directed . |
| 82 | S&F PVC (SWR) bends/Tee any radius 110 mm dia complete all as specified and directed.. |
| 83 | S&F PVC (SWR) bends/Tee any radius 75 mm dia complete all as specified and directed.. |
| 84 | Demolition of cement concrete reinforced up to double storey building in parapets,chajjas, fins, fascias(reinforcement cut as required to facilitate demolition) in any description and in any position not other wise specifically provided for complete all as specified and directed. |
| 85 | M&L form work to soffits of suspended slabs such as roof slabs, floor slabs, landings, beams,chajjas and similar work not exceeding 200 mm thick (Horizontal/Sloping) receive for fair finished surfaces complete all as specified and directed. |
| 86 | M&L for reinforced cement concrete (nominal mix) using 20mm graded aggregate Type B1 1:2:4 on as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves, chajjas and the like complete all as specified and directed. |
| 87 | Demolition of PCC in ground floors & pavings n exc 15 cm thickness (below or above ground level)(unreinforced) |
| 88 | S&F Prelaminated particle board 9/12 mm interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified |
| 89 | Supply and fixed4 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq.m in each pane |
| 90 | Supply and fixed4 mm thick Sheet glass, ordinary quality and glazing with oil putty in squareexc 0.5 sq.m in each pane |
| 91 | M & L for Floor door stopper of aluminium alloy body and tongue, anodised,with hard drawn steel spring,fixed in floor length 150mm complete all as specified and as directed. |
| 92 | Supply and fixed aluminium( extruded section body)Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed |
| 93 | Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructionscomplete all as specified. |
| 94 | Supply & fixing 3 mm dia galvanized steel wire hangers (upto 1200mm length) adjusting level fixed to roof slab by means of ceiling cleats made of GI flat 40x3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia 40 mm long complete all as specified . |
| 95 | S&F hollow PVC Wall lining cosisting of 5 mm thick Plain colour PVC sheet complete all as specified and directed by Engineer in charge |
| 96 | Material and labour for rendering/plastering appx 5mm thick (matching with existing plaster thickness) in cement mortar (1:3) on any face of ceiling in patches matching with existing, finished fair and even and smooth without using extra cement |
| 97 | Supply only water proofing liquid complete all as specified. |
| 98 | Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing ) removing serviceable tiles to store and rubbish off the premises. |
| 99 | M & L glazed ceramic coloured tiles of size 450x350x7 mm/350x250x7 mm thick on vertical surface as in dados, skirting etc, set and jointed in neat cement slurry over and including 10mm thick plaster in cement mortar 1:4, pointed with white/ coloured cement to match complete all as specified and as directed.. |
| 100 | M&L non skid ceramic coloured tilesPremium (1st quality) straight edge, size not less than 395x395x7 to 8 mm thick in floors etc in any shade, set & jointed in neat cement slurry & pointed in matching coloured polymer based grout to match over & including 20 mm thick screed bed in cement mortar 1:4complete all as specified and directed |
| 101 | Dismantling stone slabs and tiles of any description or thickness in floors,apron etc laid bedded and pointed in any ,mortar.complete all as specified and directed by Engr In Charge |
| 102 | M & L for Double charge stain free Vitrified ceramic tiles, Premium (1st) quality straight edge, coloured tiles having size not less than 595x595 mm and 8 mm thick, set and jointed in neat cement slurryand pointed in white or coloured cement to match coloured tiles including and over 20 mm thick screed bed in CM 1:4 and pointed in epoxy grout to match in floors complete as directed by Engineer-in-Charge. |
| 103 | All as per Item No 26 here in before,coloured tiles 595x100 mm and not less than 8 mm thick on vertical surfaces such as skirtings, set & jointed in neat and pointed in epoxy grout to match the floor tiles, over & including 10 mm thick screed in cement mortar (1:4) complete as directed by Engineer-in-Charge. |
| 104 | Supply, hoisting, fixing in position and connecting incoming and outgoing pipes,500litres capacity rotational moulded polyethylene water storage tank (cylindrical vertical with closed top), multilayer, complete all specified and as directed including taking downexistingtank. |
| 105 | S&F Gun-metal, globe or gate valves 25mm bore, with iron wheel head, screwed both end for iron pipe |
| 106 | M & L for brick work with subclass \"B\" bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete. |
| 107 | Material and labour for applying two coats of oil bound distemper over acoaton new plastered walls surfaces including preparation of surfaces complete all as specified. |
| 108 | M&L for preparation of new surfaces plastered by brooming down or steel wire brushing scraping down oil & greasy spots etc and applying two coats cement based paint of approved tint overnew plastered surfaces etc all as specified and directed by Engineer-in-Charge. |
| 109 | M & L three coats ofwhite wash on new plastered surface of ceiling including preparation of new plastered surface complete |
| 110 | Preparation of old surfaces plastered or unplastered by mechanical sander, brooming down or steel wire brushing scraping down oil & greasy spots etc and applying two coat of cement base paint on old decorated surfaces of walls include comices complete with roller all as specified and as directed by Engr-in-Charge |
| 111 | M & L for two coats of white wash incl preparation over old surfaces of ceiling complete all as specified and as directed. |
| 112 | M & L 75mm thick PCC 1: 3: 6 type C-2 ( using 40mm graded stone aggregate ) in plinth protection /sub base of interlocking tiles etc, including finishing the surface even and smooth without using extra cement. |
| 113 | M&L Machine pressed precast conctete factory madeinterlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35Grade with grey cement and no pigment complete all as specified. |
| 114 | M & L sand filling under interlocking tiles including watering and consolidation. |
| 115 | S&F gate with framed work such as grills and gratings etc with end of bars shouldered or riveted or forged into spikes, framed guard bars, barred iron doors ladders, framed balusters walk ways, railings,gates etc complete all as specified |
| 116 | Dismantling plain or corrugated sheets any gauge, thickness incl nanital or similar pattern roof covering complete all as specified |
| 117 | Dismantling timber scantling 40 sq.cm and over in section, in any position (unframed work) complete all as specified |
| 118 | Dismantlig wrought iron or mild steel work of any description not otherwise provide for complete all as specified |
| 119 | Supply and fixing Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws complete all as specified and as directed by Engineer-in-charge. |
| 120 | Supply and fixing Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick, any colour having tensile strength of 550 Mpa as in ridge (including cutting and bent to shape), roof covering, fixed with self tapping screwscomplete all as specified and as directed by Engineer-in-charge. |
| 121 | Material and labour for mild steel work tubular poles/post including special shaped washers etc. complete using ERW or induction butt welded tubes conforming to latest relevant IS grade St-240 complete all as specified & directed by Engineer-in- charge. |
| 122 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets any thickness including cover fillets fixed in any position with nails fixed with screws complete all as specified and as directed by Engineer-in-charge. |
| 123 | Demolition of brick work or stone / boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, in any description including cleaning and stacking serviceable brick for re use and balance removing rubbish from the site complete all as specified and as directed by Engineer-in-charge. |
| 124 | Material and labour for brick work with sub class ‘B’ old size burnt clay bricks, straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:4) complete all as specified and as directed by Engineer-in-charge. |
| 125 | Material and labour for precast cement concrete (1:2:4) type B1 using 20mm graded stone aggregate in kerb stone, quoin blocks, copings, kneelers, apex stones, boundary pillars, bed plates, bonders ( for stone walling), etc with plain fair faces, chamfers, weatherings, slightly rounded or chamfered angles and throating etc including form work and laying and setting in cement mortar (1:4) including dismantling of old damaged kerb stone and removing the debris from site all as directed. |
| 126 | Demolition of floor hearth or wall tilling including cement mortar bedding but not backing including removing rubbish material from building and thrown in low lying empty area (as per direcction of AGE/JE) at any distance upto 500 metres from the site complete all as specified and as directed by Engineer-in-Charge |
| 127 | Material and labour for vitrified ceramic coloured tiles (dark shade, jointless) double charged 8 to 10 mm thick square or rectangular area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, as in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile includingnecessary cutting as per site requirement, tiles laid over and including 15 mm thick bedding layer (screed) in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge. |
| 128 | Material and labour for vitrified ceramic coloured tiles (dark shade, jointless) double charged 8mm to 10mm thick square or rectangular (same as floor tile, as per above item ), as in skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile includingnecessary cutting as per site requirement, tiles laid over and including 15 mm thick bedding layer (screed) in cement mortar (1:4) complete all as specified and directed by Engineer-in-Charge. |
| 129 | Supply and fixingfactory made 125 x 60mm pressed steel frames, thickness of sheet 1.25mm for doors with one or more rebates including supply and fixing necessary lugs and lock strike plate, etc. , including 100 mm butt hinges suitable Nos as directed for each leaf, complete all as specified and as directed by Engineer-in- charge. |
| 130 | Material and labour for PCC (1:3:6) type C-1, using 20 mm graded aggregated as in back filling of chowkhats and for hold fast complete all as specified and as directed by Engineer-in-Charge |
| 131 | Supply & fixing factory made glazed and skeleton shutter, 35mm thick of 2nd class hard woodopen rebated (two panels as approved) and prepared to receive glass, gauge etc, without sash bars, edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc.Sizes of members as specified in SSR Part-I, Section 8 and fitted to chowkhats,menbers shall be kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and as directed by Engineer-in- charge. Note : -(i) The sutters shall be brought at site without primer and same shall be applying at site as per direction of Engineer-in-charge. Primer shall be measured paid separately under appropriate item of BOQ. |
| 132 | Supply & fixing factory made plain framed panelled shutters (two panels as approved), 35mm thick of 2nd class hard woodwith lock rail and panel inserts of 12mm veneered particle board with commercial veneering on both faces. The size of rails and styles as per IS-1003 (Part-I), kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401, including 2nd class soft wood kail beading 20mm wide tapering from 10mm to 5mm on one side and also fitted to chowkhatcomplete all as specified and as directed by Engineer-in- charge. Note : -(i) The sutters shall be brought at site without primer and same shall be applying at site as per direction of Engineer-in-charge. Primer shall be measured paid separately under appropriate item (painting) of BOQ. |
| 133 | Supply & fixingaluminium anodised sliding door bolts 250mm long, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified & directed by Engineer-in- charge. |
| 134 | Supply and fixing anodised aluminium handle cast type 150mm long complete all as specified & directed by Engineer-in-charge. |
| 135 | Supply & fixing 3mm thick sheet glass ordinary quality in squares not exceeding 0.5sqm in each pane (for new door/window) and fixed in any type of doors/windows/ventilators with wooden bead/pin tacked/with oil putty etc. as required or as directed including cutting of glass as per site requirement complete all as specified & directed by Engineer-in- charge. |
| 136 | Supply & fixing galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tack or galvanised wire staplescomplete all as specified & directed by Engineer-in- charge. |
| 137 | Supply and fixing mild steel 300mm long rat tail rod pattern spring including roller and roller plate and fixing to wooden frame with screw complete all as specified and as directed by Engineer-in- charge. |
| 138 | Material and labour for preparation of new plastered surfaces of walls/pillars /cornices by brooming down with using broom/sand papering or by any other means, and make the surface even and smooth by using sander machine (with provision of dust sucking) upto entire satisfaction of Engineer-in-charge, and after preparing the surfaces applying two coats ofoil emulsion distemper (washable), as approved tint/colour over a coat of alkali resistant priming paint by using paint roller brush complete all as specified and as directed by Engineer-in-Charge. |
| 139 | Material and labour for Preparation ofnew or previously untreated wooden or wood based surfacesof any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified & directed by Engineer-in- charge. |
| 140 | Material and labour for complete removal of existing treatment (any layers of existing treatment ) from walls/pillars/cornices by scraping down with using mechanical sander machine (including provision of dust sucking) upto entire satisfaction of Engineer-in-charge, brooming and washing down and preparing the surfaces smooth and after that applying average 3mm thick layer (1.5mm thick each in two layer application) of white cement based putty(wall care putty, make Birla JK or equvilent as approved by Engineer-in-charge), after applying putty first and second coat sanding the surface as per requirement by using mechanical sander machine to make the surface even and smooth upto entire satisfaction of Engineer-in-charge and after prepare the surface smooth applying two coats of oil bound distemper (washable) as per approved tint/colour by using paint brush or roller brush complete all as specified and as directed by Engineer-in-Charge.NOTE : - Each stage i.e after complete removal and before applying OBD as specified above, the surface shall be passed in writing by the Enigineer-in-charge. |
| 141 | Supply and fixing in replacement stainless steel chromium plated pipe 25mm dia, wall thickness of pipe not less than 20 guage, as curtain rod fixing with and including fancy type brackets and decorated end knobs (finials), stop roller etc, fixed on wall for doors and windows curtains, cuttings as required length and fixing at site including fixing arrangements, rawl plug, screws etc. including taking out old any type rod or pelmet boxes with curtain rod completeall as specified & directed by Engineer-in- charge. |
| 142 | Supply and fixng 100mm long mild steel butt hinges medium weight cold rolled complete all as specified & directed by Engineer-in-charge. |
| 143 | Supply and fixing of built in steel cup board with pressed steel frame of size 75mm x 45mm x 1.25mm thick with pressed steel shutter 01 mm thick pattern fixed to masonry wall by hold fasts, made out of 25x3 mm flat iron including dully spray painted with two coats of synthetic enamel paint over one coat of red oxide primer all around on steel surfaces including taking down old existing wooden cup board including cutting hole making good disturbed portion in CM (1:3) to receive fresh PCC all as directed and shown on Drg No 178 sheet No 1/4 to 4/4 dt 12.05.2001. (Shelves shall be measured and paid for separately) |
| 144 | Supply and fixing of PVC wall panelling comprising 5 mm thick PVC sheet having weight not less than 3.00 kg/sqm fixed with clip and plugs all as per manufacturer\"s instructions. (Pattern and design shall be approved by the GE) complete including necessary PVC beading/filet/jointer etc of weight not less 100 gm/metre complete all as specified & directed by Engineer-in-charge. |
| 145 | Supply and fixing anodised aluminium snap grid frame work of size of grid 605 x605mm for false ceiling including necessary notching and prepared holes, the snap grid shall consist of anodised aluminium main tee of size 36.5mm x 25mm x 1.4mm weighing 0.24 Kg/RM, cross and Intermediate tee of size 23.5mm x 26.4mm x 1.4mm weighing 0.191 Kg/RM. The main and cross tee shall be jointed at junction with steel screws or MS bolts, nuts and washers, the snap grid (main / cross tee sections) shall be supported at ends all along the wall with anodised aluminium angle of size 35mm x25mmx 2mm weighing 0.36 Kg/RM fixed to wall with suitable arrangement and duly suspended with 4mm GI wire hangers (upto 1200 mm length) adjusting level fixed to roof slab by means of ceiling cleats made of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long including providing 12mm thick gypsum board in grid fixed in false ceiling grid made of aluminium as per above specifications complete all as specified and as directed by Engineer-in-charge. |
| 146 | Supplying of earth from out side defence land for filling under floor/open plinth, including spreading, levelling in layers n exc. 25 cm thick, consolidating the surface with Durmat/hand roller to required gradient and camber and upto entire satisfaction of Engineer-in-charge including levelling, well ramming including watering as required and consolidation complete all as specified and directed by Engineer-in-Charge. |
| 147 | Material and labour for 100mm thickcement concrete ( 1:4:8),type D-2 using 40 mm graded stone aggregate as in sub base of floor complete all as specified and as directed by Engineer-in-charge. |
| 148 | Material and labour for PCC (1:2:4) Type B0 using 12.5mm graded stone aggregate as in roof kerb (golla) or mud stops, side of roof sheet & similar work etc rounded or chamfered on edges including necessary form work etc complete all as specified and directed by Engineer-in-Charge. |
| 149 | Supply & fixing 25 cm x 25 cm x 25 mm thick chequered cement concrete coloured tiles as in floor/path, set, jointed and pointed in neat cement slurry with grey cement and pigmentto match the colour of tile, tiles laid over and including 15 mm thick bedding layer (screed) in cement mortar (1:6) complete all as specified and as directed by Engineer-in-Charge. |
| 150 | Taking down carefullyunserviceable copper / aluminum point wiring(light, fan, socket) complete including existing conduit pipes and removal of unserviceable fittings such as switches, switch-sockets, ceiling roses, light fittings etc and removing the retrieved materials from site including making good the disturbed surface of walls, floors, ceilings etc to match with the adjoining work complete all as specified and directed. |
| 151 | M & L for point wiring with multi stranded copper conductor FRLSH cable, 1100 volts grade PVC insulated and unsheathed of size 1.5 Sqmm single core in and including PVC concealed conduit not less than 20mm dia ( medium duty ISI marked) and conduit fittings with and including 3 mm thick bakelite laminated sheet top cover for one fan / light controlled by one switch including provision of 1.5 Sqmm PVC insulated & unsheathed with single core, multi stranded copper conductor FRLSH cable as earth wire to common earth & connecting to earth dolly all as specified and directed. |
| 152 | All as per item No 151.00here in before but for socket outlet 5 pin, 6 Amp on same boardcomplete all as specified. |
| 153 | All as per item No 151.00 here in before but for socket outlet 5 pin, 6 Amp on independent board but not below the switch board complete all as specified . |
| 154 | All as per item No 151.00 here in before but for one socket outlet 6 pin, 6/16 Amp multipurpose 2 in 1 on independent board with cable of2.5 Sq mm, multi stranded copper conductor FRLSH cable including provision of 2.5 Sq mm PVC insulated solid copper conductor FRLSH cable continuos as earth wire connected to earth dolly, conductor etc. |
| 155 | AllAs per item No 151.00 in before but for bell/buzzer point, complete all as specified and directed by Engineer-in-charge. |
| 156 | Material and labour for point wiring complete with 1.5 sqmm (nominal area) PVC insulated and unsheathed multi stranded copper conductor FRLSH cable (ISI marked) in existing concealed/ surface conduit for one light point /fan point controlled by one switch including 1.5 sqmm single coremulti stranded FRLSH copper earth wire to common earth and connecting to earth dolly and existing MS Sunken box and including new 3 mm thick laminated sheet ISI Marked for mounting of switches and socket fan regulator, for light/fan/bell pointetc., complete all as specified and directed by Engineer-in-charge. |
| 157 | All as per item No 156 here in before but for socket outlet 5 pin 5/6 Amp on same board, complete all as specified and directed by Engineer-in-charge. |
| 158 | All as per item No 156 here in before but for socket outlet 5 pin 5/6 Amp on independent boardbut not below the switch board, complete all as specified and directed by Engineer-in-charge. |
| 159 | All as per item No 156.00 here in before but for one socket outlet 6 pin, 6/16 Amp multipurpose 2 in 1 on independent board with cable of2.5 Sq mm, multi stranded copper conductor FRLSH cable including provision of 2.5 Sq mm PVC insulated solid copper conductor FRLSH cable continuos as earth wire connected to earth dolly, conductor etc. |
| 160 | Material and labour for Sub main wiring complete with two single core 6 sqmm,1100 volts grade, PVC insulated, multi strandedcopper conductor cable FRLSH with continuous copperearth conductor of 6 sqmmin& including PVC conduit size 20mm complete all as specified and directed by Engineer-in-charge. |
| 161 | Material and labour for Sub main wiring complete with two single core 4 sqmm,1100 volts grade, PVC insulated, multi strandedcopper conductor cable FRLSH with continuous copperearth conductor of 4 sqmmin& including PVC conduit size 20mm complete all as specified and directed by Engineer-in-charge. |
| 162 | Material and labour for Sub main wiring complete with two single core 2.5 sqmm,1100 volts grade, PVC insulated, multi strandedcopper conductor cable FRLSH with continuous copperearth conductor of 2.5 sqmmin& including PVC conduit size 20mm complete all as specified and directed by Engineer-in-charge. |
| 163 | Supply and fixing switch piano flush type, single pole, one way, 5/6 Amps ISI mark,complete all as specified and as directed by Engineer-in-Charge. |
| 164 | Supply and fixing Socket outlet multipurpose, 2 in 1, 5 pin, 5/6 Amps, flush type, complete all as specified and as directed by Engineer-in-Charge. |
| 165 | Supply and fixing switch piano flush type , single pole, one way, 15/16 Amps ISI mark, complete all as specified and as directed by Engineer-in-Charge. |
| 166 | Supply and fixing Socket outlet multipurpose , 2 in 1, 5 pin, 15/16 Amps, flush type,complete all as specified and as directed by Engineer-in-Charge. |
| 167 | Supply and fixingBell push, flush type, 5 amp 250 Volts, complete all as specified and directed by Engineer-in-charge. |
| 168 | Supply and fixing Electric / Electronic Bell, ding dong type 230 Volt AC supply, complete all as specified and directed by Engineer-in-charge. |
| 169 | Supply andfixing modular Switch1 way 6A ,1 module 250 volts AC one way ISI, markedmodel fantasy with suitable frame and covers with matching colours, complete all as specified and directed by Engineer-in-charge. |
| 170 | Supply and fixing modularSocket 6 A-2/3 pin combined 2 moduleshuttered 250 volts AC ISI, markedmodel fantasy with suitable frame and covers with matching colours, complete all as specified and directed by Engineer-in-charge. |
| 171 | Supply and fixing modular Switch 1 way 16 A,1 module250 volts AC ISI marked , model fantasy with suitable frame and covers with matching colours, complete all as specified and directed by Engineer-in-charge. |
| 172 | Supply and fixing modular Socket 6A/16A-2/3 pin combined,2 module 250 volts AC shuttered ISI marked, model fantasy with suitable frame and covers with matching colours, complete all as specified and directed by Engineer-in-charge. |
| 173 | Supply and fixing ceiling rose surface type polycarbonate, isolated body two to three terinal,, tpline series 20 x 50mm, 6 Amps, three terminal, complete all as specified and as directed by Engineer-in-Charge. |
| 174 | S&F Lamp holder PVC/polycarbonate type with back plate suitable for batten fitting with LED bulb 9W |
| 175 | Supply and fixing of stepped type electronic fan regulator flush type on existing sheet, complete all as specified and directed by Engineer-in-charge. |
| 176 | M& L of Self ballast LED retrofit Lamp with PVC holder and PC Diffuser 9 watt 230 Volt 6500K Complete all as directed. |
| 177 | Supply and fixing wall mounted LED 20Watt, Batten decorative square profile type, approx 4 feet long,pre wired with inbuilt driver complete fitting and all other accessories fitting arrangement including electric connection connecting with using flexible copper wire twin coreupto ceiling rose/connector complete. |
| 178 | Supply and fixing Sleek Pressue die cast aluminium housing, heat resistant glass, energy saving, IP-65 protection, better opticsfor uniform distribution security/Roadway luminaire with high power LED 25/35 Watt complete fitting with driver, LED strip and all other accessories etc suitable GIbracket and clamp over a coat of red oxide primer, including making electric connection with using twin core copper cable of suitable size. |
| 179 | Supply and fixing (concealed in wall or as directed) factory made DB (made out of CRCA sheet) SPN, 4 Way 240V, double door, earth bar, copper bus bar 200 Amp and neutral link, protection class IP-43 suitable for mounting MCB/Isolator, conforming to IS-8623, BS-5484 dust and vermin proof and including making good disturbed surfaces of walls as necessaty complete all as specified and directed by Engineer-in-charge. |
| 180 | Supply and fixing (concealed in wall or as directed) factory made DB (made out of CRCA sheet) TPN, 4 Way 433 V (8+12 modules), double door, earth bar, copper bus bar 200 Amp and neutral link, protection class IP-43 suitable for mounting MCB/Isolator, conforming to IS-8623, BS-5484 dust and vermin proof, including taking down unserviceable old DB any type including MCB etc. and including making good disturbed surfaces of walls as necessaty, complete all as specified and directed by Engineer-in-charge. |
| 181 | Supply and fixing (concealed in wall or as directed) factory made DB (made out of CRCA sheet) SPN, 8 Way 240V, double door, earth bar, copper bus bar 200 Amp and neutral link, protection class IP-43 suitable for mounting MCB/Isolator, conforming to IS-8623, BS-5484 dust and vermin proof and including making good disturbed surfaces of walls as necessaty complete all as specified and directed by Engineer-in-charge. |
| 182 | Supply and fixing MCB SPN 32 Amps,10 KA\"B\"curve240 V AC, 50 Hzincluding necessary attachment,complete all as specified and directed by Engineer-in-Charge. |
| 183 | Supply and fixing MCB SP suitable for 230 volts AC supply 6 to 40 Amps, SP rupturing capacity not less than 10KA, C Curve ISI Marked, 1 Module, including taking down unserviceable old MCB, complete all as specified and as directed by Engineer-in-Charge. |
| 184 | Supply and fixing of exhaust fan steel body 300 mm sweep (BEE, 5 star rated) with louvres, 230V, single phase AC supply, hanging on wall with 4 Nos steel fastners 10mm dia 100mm long and making good the disturbed surface as per existing surfaces, and connection to fan with suitable flexible twin core round copper wire complete all as specified and directed by Engineer-in-Charge. Note :- (i)Srl Number of exhaust fan and \"GE North BTD\" shall also be writing on fan with red colour permanent marker, cost for the same shall deemed to be included in the quoted unit rate, nothing shall be paid extra on this account, Srl number will be issued by Engineer-in-Charge.(ii) Exhaust fan installed/hanging at site as directed by Engineer-in-charge (from market to AGE E/M store/AGE E/M store to sites /Location, all conditions will be the responsibility of contractor and nothing extra will be admissible on this account |
| 185 | Supply and fixing of storage type water heater (Geyser) electrical operated 230/240 Volts25 ltr capacity, BEE 5 star rated complete with all safety equipment and accessories such as safety valve, thermostat, plug top, etc. required for proper functionality & including electric/earth connections complete all as specified and directed by Engineer-in-Charge. Note :- (i)Srl Number of Gyeser and \"GE North BTD\" shall also be writing on Gyeser with red colour permanent marker, cost for the same shall deemed to be included in the quoted unit rate, nothing shall be paid extra on this account, Srl number will be issued by Engineer-in-Charge. (ii) Gyeser installed at site as directed by Engineer-in-charge (from market to AGE E/M store/AGE E/M store to sites /Location, all conditions will be the responsibility of contractor and nothing extra will be admissible on this account. |
| 186 | M & L for fixing of 4 Nos rawl plug of suitable size (4\"-6\") nuts & bolts, grouting work in RCC/Brick wall, cemented works labour charges for cutting to exisiting GI pipe line of size 15 mm dia in position for insertion of tee or branch connection jointing complete with necessary GI fittngs, plumbing work all as per site requirement. |
| 187 | Supply and fixing (concealed in wall or as directed) single pole and neutral sheet metal enclosure (Geyser Box) with a two pin and earth plug and socket complete with one single pole MCB of capacity 25 Amps, 240 volts, AC supply complete all as specified and directed by Engineer-in-Charge. |
| 188 | Supply & fixing stop valve/angle valve cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed both end for iron pipe or for brass ferrule15mm bore complete all as specified & directed by Engineer-in-charge.Note :- The minimum weight shall be as given in SSR or in relevant IS. |
| 189 | S&F PVC connection of size 15 mm dia with PTMT nuts of length 450 mm long (hot series braded, threaded and cold series) complete all as directed by Engr-in-Charge. |
| 190 | Supply & fixing bib tap cast copper alloy, chromium plated, fancy type with crutch or butterfly handle with capstan head, screwed down, screwed for iron pipe or for brass ferrule15mm bore complete all as specified & directed by Engineer-in-charge.Note :- The minimum weight shall be as given in SSR or in relevant IS. |
| 191 | Labour for cutting to existing GI pipe of size 25/20 mm dia in position for addition/alteration or insertion of TEE for branch connection complete with cutting, threading and jointing/fixing including GI fitting as per site requirement |
| 192 | Supply and filling Local sand cushioning , with dry and clean sand, over and under the under ground cables in trenches, ducts for cable protection including consolidation, 80mm thick to the authorized width as per SSR–Part-I before laying of cable and 150mm thick after laying of cable complete all as specified and as directed by Engineer-in-Charge. (Note :- For measurement purpose puned thickness shall be measured and paid i.e 18cm.) |
| 193 | Supply and laying Best quality, locally available, sub class ‘B’ bricks (Old Size) for cable protection cover, laid flat and dry in trenches over the cable , perpendicular to the direction of cable complete allas specified and as directed by Engineer-in-Charge. |
| 194 | Supply and fixing in replacement (concealed in wall or as directed) factory made DB (made out of CRCA sheet) SPN, 12 Way 240V, double door, earth bar, copper bus bar 200 Amp and neutral link, protection class IP-43 suitable for mounting MCB/Isolator, conforming to IS-8623, BS-5484 dust and vermin proof, including taking down unserviceable old DB any type and including making good disturbed surfaces of walls as necessaty complete all as specified and directed by Engineer-in-charge. |
| 195 | Supply and fixing in replacement MCB SP suitable for 230 volts AC supply 6 to 40 Amps, SP rupturing capacity not less than 10KA, C Curve ISI Marked, 1 Module, including taking down unserviceable old MCB, complete all as specified and as directed by Engineer-in-Charge. |
| 196 | Supply and fixing in repair MCB SPN 40-63 Amps,10 KA\"C\"curve240 V AC, 50 Hzincluding necessary attachment,complete all as specified and directed by Engineer-in-Charge. |
| 197 | Supply and fixing in repair MCB TPN 100 Amps,10 KA\"C\"curve240 V AC, 50 Hzincluding necessary attachment,complete all as specified and directed by Engineer-in-Charge. |
| 198 | S&F new generation energy saving ,wall mounted LED Tube lightbatten fittings , extruded aluminum heat sink provided for efficient heat dissipation & integrated electronic driver 20 Watt LED power factor > 0.95, 100 lumen/watt duly fitted on pvc square block 5700K (4\" ft long ) with LED rod 20 watt, 230 Volts 50 Hz. complete all as specified and as directed by Engineer-in-Charge. |
| 199 | S&F in replacementnew generation energy saving ,wall mounted LED Tube lightbatten fittings , extruded aluminum heat sink provided for efficient heat dissipation & integrated electronic driver 20 Watt LED power factor > 0.95, 100 lumen/watt duly fitted on pvc square block 5700K (4\" ft long ) with LED rod 20 watt, 230 Volts 50 Hz. complete all as specified and as directed by Engineer-in-Charge. |
| 200 | Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete power factor > 0.95, 100 lumen/watt, CCT min 5700K complete all as specified and as directed by Engineer-in-Charge. |
| 201 | Material and labour for Earthing complete with galvanised iron earth plate electrode of size 60cm x 60cm x 6.3mm buried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 metre below normal ground level, connected to and including earth continuity GI wire 4 mm (upto test point from earth plate i.e. 7.5m min) by means ofGI bolts/nuts/washers and including protected by 15mm dia GI light grade protection pipe from earth plate to test point, including making of test point. Earth plate shall be surrounded by packed layer of char coal/coke & salt all around bottom and top with alternative layer. 20mm GI light grade pipe for watering (should be 10cm above GL) and including socket, plug, funnel, wire mesh, RCC cover and (including steel for cover) PCC (1:2:4) type B1 (using 20 mm graded stone aggregate) as in earthing pit including necessary form work, excavation & earth work, all as specified & shown in electrical plate No. 3 of SSR (Part – I) including taking out/dismantling old unserviceable earthing system complete all as directed by Engineer-in-charge. Note:- (i) PCC chamber shall be constructed at least 1.5 metre away from the earth electrode and pipe for watering shall be provided in slanting manner. |
| 202 | Supply, laying and testing cable for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 70 Sqmm 3.5 core including taking down unserviceable Service cable from pole to bldg all as specified and directed.. |
| 203 | Supply, laying and testing cable for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 Sqmm 3.5 core including taking down unserviceable Service cable from pole to bldg all as specified and directed.. |
| 204 | Supply, laying and testing cable for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 Sqmm 2 core including taking down unserviceable Service cable from pole to bldg all as specified and directed.. |
| 205 | Supply and fixing of BLDC (Brushless direct current motor) ceiling fan 5 star rated, complete with blades, down rods, and accessories, 230 Volts, 1200mm sweep, Min air delivery 210 CFM with service value 6.00 BEE, including electrical connection providing twin core round copper conductor cable of suitable size, complete all as specified and as directed by Engineer-in-Charge.Note :- (i)Srl Number of ceiling fan and \"GE North BTD\" shall also be writing on fan with red colour permanent marker, cost for the same shall deemed to be included in the quoted unit rate, nothing shall be paid extra on this account, Srl number will be issued by Engineer-in-Charge. (ii) Ceiling fan installed/hanging at site as directed by Engineer-in-charge (from market to AGE E/M store/AGE E/M store to sites /Location, all conditions will be the responsibility of contractor and nothing extra will be admissible on this account |
| 206 | Supply and fixing wall mounted/ surface mounted decorative wall light fixture in cylindrical profile made up of decorative glass including LED 9 watt lamp, base B22, complete fitting and all other fixing accessories including electric connection with using flexible copper wire twin core including taking down old unserviceable light fittings any type complete all as specified and as directed by Engineer-in-Charge. |
| 207 | Supply and fixing galvanized steel tubing (GI pipe) light grade 15mm bore ISI marked with all new fittingslike elbow, tee, union, socket, reducer etc. and fixed complete to walls, ceiling and laid in floor or concealed in walls including cutting chases in wall (as directed ) and making good disturbed surfaces of walls including cutting and threading of pipe complete all as specified and as directed by Engineer-in- charge. |
| 208 | Supply and fixing galvanized steel tubing (GI pipe) light grade 32mm bore ISI marked with all new fittingslike elbow, tee, union, socket, reducer etc. and fixed complete to walls, ceiling and laid in floor or concealed in walls including cutting chases in wall (as directed ) and making good disturbed surfaces of walls including cutting and threading of pipe complete all as specified and as directed by Engineer-in- charge. |
| 209 | Supply and fixing in replacement recessed LED ceiling cool light type for maximized glare free output suitable for 600x600mm and ceiling cutout 595x595mm modular grid/POP ceiling complete fitting with separate electronic driver and high brightness SMD LEDs 36 watt, 6000K and one nos extra LED driver along the fittings including connecting electric connection, complete all as specified and directed by Engineer-in-Charge. |
| 210 | Supply and fixing in replacement LED mirror light fiting 7/ 9 watt, 6000K, lineer & compact with decorative grey end caps, polycarbonate body and ribbrd opal diffuser complete fitting with lamp and all other accessories fitting arrangements including electric connection connecting with using flexible copper wire twin core upto ceiling rose/connector, complete all as specified and as directed by Engineer-in-Charge. |
| 211 | Supply and fixing galvanized steel tubing (GI pipe) light grade 40mm bore ISI marked with all new fittingslike elbow, tee, union, socket, reducer etc. and fixed complete to walls, ceiling and laid in floor or concealed in walls including cutting chases in wall (as directed ) and making good disturbed surfaces of walls including cutting and threading of pipe complete all as specified and as directed by Engineer-in- charge. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
