Name of Work: Maintanance of Rajiv Gandhi Sewa Kendra at Samthar Gram Panchayat.
Sl. No.
Item Description
1
PWD(WB)/BUILDING WORKS(CCS)/Page-66/Item-36 Supplying and laying true to line and level vitrified tiles ofapproved brand (size not less than 600 mm X 600 mm X 10mm thick) in floor, skirting etc. set in 20 mm sand cementmortar (1:4) and 2 mm thick cement slurry back side of tilesusing cement @ 2.91Kg./sqM or using polymerised adhesive(6 mm thick layer applied directly over finished artificial stonefloor/Mosaic etc without any backing course) laid afterapplication slurry using 1.75 Kg of cement per sqM belowmortar only, joints grouted with admixture of white cementand colouring pigment to match with colour of tiles / epoxygrout materials of approved make as directed and removal ofwax coating of top surface of tiles with warm water andpolishing the tiles using soft and dry cloth upto mirror finishcomplete including the cost of materials, labour and all otherincidental charges complete true to the manufacturer\"sspecification and direction of Engineer-in-Charge. (Whitecement, synthetic adhesive and grout material to be suppliedby thecontrr]e)I (I) With application slurry @1.75 kg/ Sq.m, 20 mm sandcement mortar (1:4) & 2 mm thick cement slurry at back sideof tiles, 0.2 kg/ Sq.m white cement for joint filling withpigment.(B) Light Colour
2
PWD(WB)/BUILDING WORKS(CCS)/Page-205/Item-2 Supplying best Indian sheet glass panes set in putty (as per I.S. specification) and fitted and fixed with teak wood beads and nailscomplete (In all floors for internal upto 6 m height for external wall).(ii) 4 mm. thick.
3
PWD(WB)/BUILDING WORKS(CCS)/Page-197/Item-17 Protective and decorative Acrylic exterior emulsionpaint of approved quality , as per manufacturespecification as per direction of EIC to be apply over Acrylic primer as required. the rate included cost of material , labour scaffoldic and all incidential charges but excluding the cost of primer.In ground floor ( two coat).(a) Normal Acrylic emulaion.
4
Chairs
5
Supplying and laying in the specified pattern of interlocking concrete block pavements (ICBP) with concrete blocks (with concrete grade as specified as per Table I of IS 156858: 2006) manufactured from BIS licenceemanufacturer with specer nob (small petroding profiles on the verticle face of a paver block used as a device for keeping minimum joint gap in between the paving blocks, as per CI No. 3.26 of IS 15658) and of specified size and shape with as (the ratio of lenth to the thickness of paver block as per CL No. 3.3 IS 15658) as per Table 2 of IS :15658 with flexuralstrength and breaking load as per annexure G of of IS 15658 on the prepared base course of specified CBR as per Table 1 of IRC SP 63 (2018) or else as mentioned in the design and drawing with a cushion oa compacted bedding sand of 25-35 mm thick (grading of bedding sand as per clause 6.5.1 of IRC SP-grading of the joint filling sand will beas per clause 6.5.2 of IRC SP 63) and compacting the edges with cut blocks as per CL. No 8.7 of IRC SP-63 (2018) with proper confinement of bedding and joint filling sand , compacting, levelling and filling up the edge gap.as per CL. No 8.7 of IRC SP-63 (2018) with proper confinement of bedding and joint filling sand , compacting, levelling and filling up the edge gap.50mm thick.(ii) Coloured Decorative
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
