|
| 1 | Taking down cement plaster of any descriptionincluding racking out joints, hacking for key scrubbing down with water etc and removal of debris outside MoD landand depositing where directed. |
| 2 | Demolition of cement concrete (un-reinforced) in ground floor and paving not exceeding 15 cm thick above or below ground level andremoval of entire debris as ordered outside MD land complete all as directed. |
| 3 | Demolition of brickwork , block masonryor stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc and removal of debris as ordered outside MD land complete all as directed. |
| 4 | Taking down chowkats or frames not exc 1.5 sqm each with shutters (without taking off shutters from frame) and stacking at site where directed. |
| 5 | All as per item 4here-in-above but exceeding 1.5 Sqm but not exceeding 4 Sqm each |
| 6 | Dismantling wall and ceiling board fibre pulp,insulation etc or insulation boards any thickness including cover fillets completeall as directed. |
| 7 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for in this Schedule all as directed. |
| 8 | Dismantling fencing wire mesh of any type of any description fixed to any type of fencing posts. |
| 9 | Dismantling floor, hearth or wall tiling inluding cement mortar bedding (but not backing), stackingserviceable tiles at site andremoval of entire debris as ordered outside MD land complete all as directed. |
| 10 | Excavation over areas not exc 1.5m deep and getting out in soft/loose soil complete all as specified and as directed . |
| 11 | Excavation in trenches and not exe. 1.5 m wide and not exe. 1.5 m in depth for foundation of drain, man hole , laying of UG cablesetc. not exe. 10 Sq. m on plan and not exe. 1.5 m depth and getting out in hard /dense soil complete all as specified and directed. |
| 12 | Returning filling in trenches including spreading, leveling,watering and well ramming in layers not exceeding 25 cm thick in soft rock complete all as specified and directed |
| 13 | Removing excavated surplus soil to a distance not exceeding 50 mtsand depositing where directed .at a level not exceeding1.5 M above the starting point complete all as directed. |
| 14 | M&L for Hand packing (any thickness) at back of walls over arches etc. and raising (or lowering)to the required level with approved broken stone or boulders of size as ordred completeal as directed. |
| 15 | M & L for PCC1:3:6, type C2 using 40 mm gradedcrushed stone aggregate as in foundation filling mass concrete complete all as specified and directed |
| 16 | M & L for PCC1:4:8, type D2 using 40 mm gradedcrushed stone aggregate as in foundation filling mass concrete complete all as specified and directed |
| 17 | M&L for cement concrete 1:2:4 type B1, using 20mm graded crushed stone aggregate as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates and the like including weathering, slightly rounded, chamfered angle and throating as directed including useand waste of form work (straightor curved) all exposed surface of concrete finished fair complete all as specified & as directed |
| 18 | M&L factory made pre cast PCC 1:3:6, type C1 (using 20 mm graded granite aggregate) as in block masonry with solid blocks, exceeding 10 cm in width and setting in CM 1:6 complete all as specified. |
| 19 | All same as per itemNo 18 here-in-above nut not exceeding 10 cm thick -do- |
| 20 | M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted stone masonry builtretaing wall , abutments etc in cement mortar 1:6complete all as specified & as directed. |
| 21 | Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses, hammer dressing with maximum depression on face from straight edge held against the dressed surface not exc 20mm, lime or sand stone. |
| 22 | S&F plain, solid, straight chowkats and frames of second class hardwood, wrought, framed rebated on the solid rounded or chamfered, put together with glue, pinned at joints, complete all as specified & directed |
| 23 | S&F factory made pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, mild steel sheet of 1.25 mm thickness, complete as specified & as directed |
| 24 | S &F35 mm thick second class hard wood factory made glazed and skeleton shutter open rebated and prepared to receive glass, guage etc edge of framing plain chamfered or rounded fitted with cut and mitred beads for securing guage etc size of members of shutter as specified in SSR Part I Section 8 clause 8.24 (a) supplied and fitted to chowkats. |
| 25 | S&F 30 mm thick Flush shutters, solid core construction, with block coard core & plywood face panels commercial type on both side conforming to IS 2202 (Part- I) -1999, including internal liping beading all round fixed as in Door Shutter,Cup board shutter & Kitchen rack allas specified. |
| 26 | S&F solid PVC door frame of size 50X47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification all as directed. |
| 27 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with plain colour single piece extruded PVC profile ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour single piece extruded PVC profile for top rail lock rail bottom rail on either side and as gap insert for Top rail and bottom rail paneling of plain colour PVC sheet to fitted on the MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified and as directed.. |
| 28 | S&F100 mm size butt hinges, medium weight cold rolled mild steel and fixed . |
| 29 | S & F150 mm long aluminium, anodised , barrel tower bolt (ISI marked) of extruded section and fixed. |
| 30 | S&F 150 mm size extruded aluminium alloy handles (ISI Marked) fabricated type anodisedand fixed. |
| 31 | S&F300 mm long aluminium alloy, anodised sliding door bolt (ISI Marked) with hasp, staple (bolt type) and fixing clip of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed. |
| 32 | S&F 25mm dia stainless steel matilic coatedtype curtain rods withrings completeall as directed. |
| 33 | S&F brass chromium platedtype curtainbrackets suitablefor 20 mm diacurtain rod along with wooden support complete all as directed. |
| 34 | S&F in repair continuous (piano) hinges, mild steel, bright finish or electro galvanized width of flaps 40mm (when open) fixed with CP steel screws complete all as specified and as directed |
| 35 | Supply & fixing hasp and staple of size 100mm aluminium anodized safety type with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified |
| 36 | S & F 40mm dia, brass cupboard knobs fixed with nut, screw and washer complete all as directed. |
| 37 | S&F for 5mm thick printed coloured PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site.complete all as specified and as directed. |
| 38 | S & F in repairs brass chromium plated tubular towel rail, 20mm dia ‘D’ type, 600mm long between flanges complete all as specified and directed. |
| 39 | S&F anodized aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m, powder coated of any colour as approved (Thickness or powder coating not less than 50 micron) including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21 100mm long (2 Nos), suitable handle (1 No.) complete all as specified & as directed |
| 40 | S & F factory made UPVC white colour sliding window three track made of extruded profile with wall thickness of 2.3mm (+-0.2mm) window profile with hollow section with multi chamber. Frame (88mmx52mm), sliding sash (42mmx67mm). Sliding mesh sash (42mmx57mm) Sliding interlock (one vertical length in each shutter)(45.5mmx28mm) glazing beads (24.5mmx 16mm) will be mitred cut and fusion welded at all cornersincl drilling of holes for fixing hardware and drainage of water etc making arrangements for fixing of 5 mm thick plain sheet glass ordinaryquality with hardware EPDM gasket 1.2+-0.2mm thick galvanised steel frame (30mmx 18mm) 2 Nos, sliding mesh sash (26mmx10mm) profile to be inserted in required profile frame will be fixed to the wall with 8mmx100mm long fasteners Hardware (touch lock of zinc alloyed (white powder coated) steel roller system stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40mm and required accessories area n.exc 2 sqm each.( Note :(i) Quoted rate isdeemed tobe inclusive of5 mm thick sheet glass & SS wire cloth and includes all other connected accessories.(ii)Net opening will be measured for payment purpose) |
| 41 | S&F mild steel work as in hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Grade E-165 (Fe 290), complete, all as specified & directed |
| 42 | S&Fin repais for 18-20 mmthick MDF Board both side decorativeface cut tosize & fixed as incupboard / wardrobe partition , shutters , cabinets ,Drawers etc including 4 mm thick teak wood lipping alround complete allas specified and as directed . |
| 43 | S&F stainlesssteel wire cloth0.24 mm nominal dia of wire and averagewidth of aperature 1.40mm and fixed with stainless steel wirestaples including supply & fix secondclass hard wooden fillet, wrought , cross sectional area exceeding 3 Sqcm but n.exc 6 Sq cm fixed with nails complete all as directed. |
| 44 | Supply only mild steel galvanized chain link fencing, any size or type as directed complete all as specified.Note :-Flat iron, round tie bars, nut bolts and washer shall be measured and paid for separately. |
| 45 | Fixing only mild steel galvanized chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts etc. including provision of binding wire.Note :- Supply only chain link fencing & line wire shall be measured and paid for separately. |
| 46 | S & F for 4 mm thick of size 600mm x 600mm HSPC (High pressure steam cured) pre-primetered self embossed, textured designer board E-Board Classic( White colour) to be fixed and including GI basedframe work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screw at 450mm centre to centre/ intermediate channel 09mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with & incl ceiling section(n.exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm fixed to intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre suspended with 6 mm dia GI barhangers 1200mm centre to centre both ways fixed with steel dash fasteners or from purline from the roof with alignment clip including providing provision for light fixtures of any size complete all as specified. |
| 47 | M & L for 75 mm thick plain cement conctere 1: 3 : 6type C2 using 40 mm graded crushedstone aggregateas in plinth protection finished the surface fairand even complete all as directed. |
| 48 | M&L for 25 mm thick plain cement concrete 1:2:4 type B0 using 12.5mm graded crushed stone aggregate as in padding / levelling course / subbase of floor etcfloor and finished the surface even & rought complete all as directed. |
| 49 | M&L for vitrified ceramic tiles 10mm thick (square/rectangular), polished, coloured (light shade as approved), area of each tiles exceeding 0.18 Sqmbutnot exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:4 complete all as specified and directed. |
| 50 | All sameas per itemNo 49 here-in-above but on skirtings -do- |
| 51 | M & L non-skid coloured joint freeceramic tiles 7 to 8 mm thick (square/rectangular), area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles laid over and including 15 mm thick screed bed in cement mortar 1:4 complete all directed and specified. |
| 52 | M&L coloured glazed ceramictilesof size 350x250x7mm / 450x350x7 mm thick, on verticals surfaces, set and jointed in neat cement slurry including 10 mm thick back coat in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to matchcompleteall directed. (Note for item Nos49 to 52 : i) Quoted rateis deemed to be inclusive of cement screed. ii) Shade / pattern / Colour of tiles shall be got appproved before procurement). |
| 53 | M&L for factory made chequered cement concrete tiles, 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement & pigment, over & including 20mm thick screed bed in cement & sand mortar 1:6, complete all as specified & as directed(Note :Quoted rateis deemed to be inclusive of cement screed.) |
| 54 | M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite , laid over andincluding15 mm thick screed bedding in cement mortar 1 : 6 all as specified & directed.(Note: Quoted rateis deemed to be inclusive of cement screed.) |
| 55 | M&L for rendering 15 mm thick in CM 1:6 on brick or concrete surfaces or surface other than fair faces brick work, finished even and smooth without using extra cement complete all as specified. |
| 56 | M&L for rendering 15 mm thick in CM 1:4 on brick or concrete surfaces or surface other than fair faces brick work, finished even and smooth without using extra cement complete all as specified. |
| 57 | M& L for Raised pointing to random or polygonal rubble, un coursed or brought uptocourses stone masonry bangalore type in cement martar 1 : 3 complete all as directed. |
| 58 | M&L preparing new plastered wall surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer over a coat of 3 mm thick white cement based wall care putty as ordered complete all as specified. |
| 59 | Complete removalofany type ofexixtingtreatment from wallssurfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer over a coat of 3 mm thick white cement based wall care putty as specified complete all as specified. |
| 60 | M&L prepration of newly plastered surface ofwallsapplying 3 mm thick white cement based wall care putty , applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resisitance as per IS 15489:2004, alkali & fungal resistance dirt resistance exterior paint (Apex -Ultima Protek) of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over newsurfaces applied by mechanicalmeans i.e Airless spray including filing undulations with white cement based putty mixed with multi purpose mixer complete all as directed. |
| 61 | Complete removal of any type of earliertreatment from any surface ofwallsapplying 3 mm thick white cement based wall care putty , applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resisitance as per IS 15489:2004, alkali & fungal resistance dirt resistance exterior paint (Apex -Ultima Protek) of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over newsurfaces applied by mechanicalmeans i.e Airless spray including filing undulations with white cement based putty mixed with multi purpose mixer complete all as directed. |
| 62 | S & F sheet glass 5.5 mm thick ordinary quality and glazing with oil putty or wooden beads in square exc. 0.5 sqm in each pane complete all as directed. |
| 63 | S&F sheet glass 5.5 mm thick frosted glass, pin headed type and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each panecompleteall as directed. |
| 64 | M&L for preparing surfaces of wood and wood based materials, new or old, of any description and girth not otherwise described and treated with two coats of creosote oil complete all as specified |
| 65 | M & L Two coats of 1st quality synthetic enamel paint over a coat of pink primer on new wooden surface of any description over 10 cm in width or girth including necessary preparation of new wooden surface complete all as directed. |
| 66 | M & L Two coats of 1st quality synthetic enemal paint over a coat of zinc chromate primer over any description of new steel surface over 10 cm in width or girth including necessary preparation ofnew steel surface complete all as directed. |
| 67 | Taking down old rusted / wornout 20 mm bore GI tubing after necessary disconnection & S&F new 20 mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings fixed on walls/ceiling or laying in floors making necessary connection& testing on completion complete all as directed. |
| 68 | Taking down old rusted / wornout 25 mm bore GI tubing after necessary disconnection & S&F new 25 mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings fixed on walls/ceiling or laying in floors making necessary connection& testing on completion complete all as directed. |
| 69 | M & L for25 mm boresteel galvanised ironwater tubingmedium grade (ISI marked) with fittings all new (ISI marked) laid in trenchescomplete all as directed. |
| 70 | S&F Gun metalglobe or gate valves with iron wheelhead screwed box and both ends for iron pipe for 25 mm bore of pipe or union complete all as directed |
| 71 | S&F Gun metalglobe or gate valves with iron wheelhead screwed box and both ends for iron pipe for 40 mm bore of pipe or union complete all as directed |
| 72 | S&F in repair bib tap sink cock withflage 15 mm bore , screwed for iron pipe or for brass ferrule complete all as directed. |
| 73 | S&F in repair 15mm dia cast copper alloyBib taps fancy type ,with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as directed. |
| 74 | S&F in repairs 15mm bore Stop valve /Angle cock , fancy type with long shank and cup (concealed type) of cast copper alloy chromium plated, screwed down, high pressure with capstan heads, screwed both ends for iron pipe or for union |
| 75 | S&Ftoilet paper holder, brass chromium plated, fixed to walls with chromium plated (CP) brass screws complete all as specified & as directed |
| 76 | S&Fin repairhealth faucet ABS body with wall hook and 1.5 metre long SS braided rubber hose pipe and wall hook mounted type complete.Make:Prayag CatNo BEA-40 or equivalent in approved make. |
| 77 | S&F in repairs brass chromium plated shower rose 100 mm dia with or wihout swivel joint, any size, including fixing to steel pipe or union.complete all as directed. |
| 78 | S&F in repair CP soap dish,approximate size 160x160x90mm fixed to plugs with chromium plated (CP) brass screws completeall as directed. |
| 79 | S & F in repairs PVC connection pipe with PTMT nuts, 600mm long complete all as specified |
| 80 | S & F in repairs brass, chromium plated, 15mm bore wall mixer for mixing hot and cold water, screwed down with provision of over head shower and cock for iron pipe and fixed complete all as specified and directed. Make: PRAYAG Cat No 8475 or equvelent of Make Hindware/Parryware/CERA |
| 81 | S&FMirror cabinet (PTMT) with mirror size 430mm x 330mm fixed on wall with cadmium plated brass screws all as directed |
| 82 | S&F 300 mm size Corner Shelf with 5.5 m or more thick glass with chromium plated bracket guard and railing ,fixed on wall with PVC rawl plug & cadmium plated brass screws,complete all asdirected. |
| 83 | S&F in repairs 600mm x 450mm looking mirror of selected quality glass not less than 5.5mm thick, mounted on 6mm thick AC building board or commercial plywood including aluminium framing and fixed to PVC rawl plugs with chromium plated brass screws and cup washers complete all as specified.. Make: Gold fish / Atul / Modi / Triveni Glass |
| 84 | S&F in repairs vitreous china oval counter wash hand basin white of size 520 mm x 450 mm with & including chromium plated pillar tap cap stain head suitable for 15 mm bore of pipe , PVC connection 15 mm dia 45 cm long with chromium plated nuts and bolts and suitablewashers, PVC waste 32 bore CP waste coupling chain and plug , porcelain stopper including CI bracket fixed in repair complete all as diirected.Make : Model \"Clair\" {Cat Part No 1023} of make - CERA or equivalent of M/S Hindustan sanitary ware and Industries Ltd /M/S EID Parry (India) Ltd / M/S Johnson, H & R India Ltd |
| 85 | S & F in repairs, vitreous China wash down water closet pan (pedestal pattern), white, including connection to outgoing drain and 32mm dia flush pipe,flushing pipe, anti syphonic pipe with and including white PVC seat and cover closed pattern with flat bottom and MS chromium plated hinging device including provision of 10 ltr capacity low levelPVC Flushing cistern, PVC connection pipe, 15 mm dia, 600 mm long complete including making good damaged/disturbed surfaces complete all as specified and directed. Make of Pan CERA Cat No S1053101/S1053102 and of cistern B1010109 or equivelent of Parryware/Hindware/Prayag |
| 86 | S&F sink with drainage board made of stainless steel 1mm thick for kitchen with plugs, washers and wastes, including fixing with cast iron cantilever brackets, bedding in cement mortar on to dwarf wall, connecting union to pipe, overall minimum size 915mm x 460 mm x 203 mmwith bowl size 405mm x 354mm x203 mm including 32mm dia waste pipe of polythelene of low or high density, 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, making holes in walls for brackets and fixed in CM 1:3 or PCC 1:2:4 type B0, complete, including taking down old unserviceable sink (Make: Prayag Cat No 1322D or equivelent of Parryware /Hindware/Cera) |
| 87 | &F in repairs stainless steel Kitchen plate rack of overall minimum size 900mm x 750mm and 250mm deep, with partitions for small/large plates etc made out of stainless steel 24 Gauge, fixed with rawl plug and CP steel screws all as directed.Note : Weight of rack shall not be less than 6.00 Kg. Make PRAYAG Cat No P-348 or equivelent of Nirali/Diamond |
| 88 | Dismantling of existing any type & any capacity water storage tank fixed in any description and stacking at site andS&F new 1000 litres capacity (white colour) rotational moulded polythene water storage tank, (cylindrical verticalwith close top) triple layer colour white both inside and outside with top cover including tank adaptor , gun metalglobe / gate valve of 25 mm size , PVC float valve high pressure suitable for 25 mm bore of pipe with polythene float, fixture hoisted and fixed in position where orderedand making necessary connection and testing complete all as directed. |
| 89 | S & F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber rings joints fixed to wallcomplete all as directed. |
| 90 | S & F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber rings joints fixed to wallcomplete all as directed. |
| 91 | S & F 110 mm bore, PVC (SWR) bends of any radius complete all as specified and directed. |
| 92 | S & F 75 mm bore, PVC (SWR) bends of any radius complete all as specified and directed. |
| 93 | S&F 110mm bore PVC (SWR) vent cowl jonting the same with solvent cement complete all as directed. |
| 94 | E&M : Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators, sockets etc. to be measured separately), removing taken down materials to a place where ordered for crediting includingmaking good disturbed surfaces of walls, floors, etc to match with the existing surface complete all as directed.. |
| 95 | Taking down old un servceable DB\"s / Main switches any capacity complete all as directed. |
| 96 | Taking down old un servceable MCB\"s, SP/SPN / TPN complete all as directed. |
| 97 | Point wiring with PVC insulated and unsheathed FRLS cable single core multistranded copper conductor 1.5 sqmm size, 1100 volts grade cable conforming to IS-694 1990 drawn in and including PVC rigid non metalicconduit (Medium Grade) concealed in wall conforming to IS-9537 with all accessories including fabricated MS terminal boxes fixed flush with wall surface with 3mm thicklaminated sheet top cover fixed with brass screw for mounting switches, sockets, regulator etc including 1.5 sqmm single core PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly all as specified for :-(a) One light / Ceilng Fan /Exhaustfan /bellpoint controlled by one 5 Amps switch one way |
| 98 | (b) One 3 pin socket point 5/6 Amp on independent board |
| 99 | (c) One 3 pin socket point 5/6 Amp on same board with other switches.(to be provide new point as user requirement) |
| 100 | All as per item No. 97 here-in-above but with 2.5sqmm ( Nominal area ) cable with 2.5 Sqmm size copper earth continuity conductor for 3 pin 15/16 A socket outlet on independent board complete all as specified and directed. |
| 101 | S&Fceiling rose surface bakelite White / Ivory / Urea finish50 mmdiathree terminals including supply and fix PVC square mounting block complete all as specified and directed. |
| 102 | S&F Modular type 1-wayBell push switch , 1 module 6Amps240 Volts AC complete all as directed. |
| 103 | Supply and fix modular switch 1 way 6A,1 module Make : Anchor/Havell/Polycab |
| 104 | Supply and fixsocket, 6A-2/3 pin combined 2 modules Make : Anchor/Havell/Polycab |
| 105 | Supply and fix socket, 6A/16A-2/3 pin combined 2 modules Make : Anchor/Havell/Polycab |
| 106 | S&Felectric calling Bell Ding DongAC 230 Volts, single pole / Multi Music type |
| 107 | S & Fstepped type electronic modular fan regulator 2 -moudle , madular type , 2 Module 230 volts AC fixedcompleteall as directed. |
| 108 | S & F in repair PVC Modular white cover plate with frame, 2 module make as per existing completeall as directed. |
| 109 | S & F in repair PVC Modular white cover plate with frame, 3 module make as per existing completeall as directed. |
| 110 | S & F in repair PVC Modular white cover plate with frame, 4 module make as per existing completeall as directed. |
| 111 | S & F in repair PVC Modular white cover plate with frame, 6 module make as per existing completeall as directed. |
| 112 | S & F in repair PVC Modular white cover plate with frame, 8 module make as per existing completeall as directed. |
| 113 | S & F in repair Modular metal flush box , 2 module make as per existing completeall as directed. |
| 114 | S & F in repair Modular metal flush box , 3 module make as per existing completeall as directed. |
| 115 | S & F in repair Modular metal flush box , 4 module make as per existing completeall as directed. |
| 116 | S & F in repair Modular metal flush box , 6 module make as per existing completeall as directed. |
| 117 | S & F in repair Modular metal flush box , 8 module make as per existing completeall as directed. |
| 118 | S&Fof LEDLuminarire 600mmx600mm 35/36 Watt , 230 volt, with recessed type with high efficiencyPMMAdiffuser soft glare free light complete with driver holders & LED lamp suitable for roof ceiling includingconnecting up with three core flexible copper conductor cable of size 24/0.20 sqmm ,complete all as specified and directed. |
| 119 | S&F LED tube light fitting of20 watts 6000K , 230 volt, withaluminium extruded channel powder coated with diffuser for glare free light complete with all fixing accessories such as 2 nos of PVC square/round boxes, screws, etc and connecting up with three core flexible copper conductor cable of size 24/0.20 sqmm complete all as specified and directed by Engr-in-charge. |
| 120 | S&F 10 Watt , 6000K, 230 Volt,2ft Batten surface and wall mounted LED batten with aluminium extruded channel powder coated par glare free light with PVChousing & integrated electronic driver complete with all fixing accessories such as 2 nos of PVC square/round boxes, screws, etc and connecting up with three core flexible copper conductor cable of size 24/0.20 sqmm complete fixed as per manufacturers instructions and making necessary electricalconnections and testing on completion complete all as directed. . Make : Havells/wipro/surya/ Philips |
| 121 | S&F bldg security lightfittings 1x 35 Watt Ac 230v out door typeLED street light with high pressuredie cast aluminium and heat ressistent complete with driver ,lamp bracket with impact and corrosion resistentincluding thermal managment in multiple optics complete, IP65/66 and wired with all accessories and including connection up with twine core twisted flexible copper conductor cable with 1.5 M long suitable size all as specified and directed. |
| 122 | S&F street light bracket made out of 25 mm bore GI Light grade 1.00 M long to required shape as in bracket for steet light fittings fixed with two pair of MS flate iron clamp of size50mm X 6 mm thickness of required shape with nuts, bolts and washers suitable for steel tubular pole including painting of mild steel flate iron surface with two coates of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 123 | S&Fsubmain wiring with 2 runs of 6 Sqmm single core PVC insulated, unsheathed, multi strandedcopper conductor and one single core 6 Sqmm PVC insulated , unsheathed , multi strandedcopper cable as earthing lead as per IS : 694 / 1990 drawn through and includingnon-metallic PVC rigid conduit/casing caping of size as orderedin walls / ceilings etc with all accessories such as Tees, Elbows, junction box, reducers etc and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion complete all as specified and directed. (Note :- 2 runs 6 Sqmm cable , one run 6 Sqmmcableand one run of PVC Conduit /Casing caping shallbe measured as oneunit length) . |
| 124 | S&F Sheet metal enclosure (ISI marked) distribution board for 415 volts, TPN4 way Vertical type, doubledoor, triiple pole and neutral with incomingMCCB 200 Amps rated neutral copper bus bar for housing MCB and fixed flush in wall surface, and tested on completion complete all as directed.(Note: MCCB measured & paid seperately ). |
| 125 | S&F Sheet metal enclosure (ISI marked) distribution board for 240 volts, SPN8 way horizontal type, double door, single pole and neutral with 200 Amps rated neutral copper bus bar for housing MCB and fixed flush in wall surface, and tested on completion complete all as directed. |
| 126 | S & F MCCB TPN 40 to 100 Amps 415 volts, \"C\" Series 10 kA rupturing capacity providing in DB complete all as specified and directed by Engr-in-charge. |
| 127 | S & FMCB single pole & neutral 40 Amps 240 volts, \"C\" Series10 kA rupturing capacity providing in DB completeall as specified. |
| 128 | S & FMCB single pole 6 to 32 Amps 240 volts, \"C\" Series 10 kA rupturing capacity providing in DB completeall as specified and directed by Engr-in-charge. |
| 129 | M&L for taking down and dismantling of ceiling fan 1200mm/1400mm sweep 230 Volt 50 C/S AC of any make or model by opening the cover, separating down rod, rotor and stator assembly, locating the fault and making the fan fully in serviceable condition with & including replacing the bearing withsimilar type of exisitng one, worn out screws of the cover, split pin, twin core flexible copper wire of size 23/0.0076, locking nuts & machine screws with spring washer for ceiling fan blades, oiling and greasing including rewinding of ceiling fan by removing of burnt winding from stator and rewinding the same with super enamelled copper winding wire of same gauge, same weight & turns including varnishing of winding etc &finally painting the ceiling fan with one coat of spray painting with white DUCO Paint & lettering & Numbering the same as per existing ,reassembling , refixingthe same in same or different location asordered & finallytesting the fan ,complete all as directed. |
| 130 | All sameas per itemNo 129 here-in-above but wall mounting fan any size & sweep -do- |
| 131 | All sameas per itemNo 129 here-in-above but exhaust fan any size & sweep -do-Note for itemNo 129 to 131:- (i) Spare Parts/accessories found unserviceable includingbearings , rewinding etc which are required to makethe fan functional shall be providsed by thecontractorwithout any extra cost toGovt as quoted rate isdeemed tobe inclusive forthesame .(ii) Quoted rate isdeemed tobe inclusive ofpainting . |
| 132 | Taking down any type and size of Geysers fixed in any description after necessary water connection & Supply & Fix new Electric water heater 5 Star ratingglass line Inner tankplastic outer bodyPUF insulation of 25 litre storage capacity operating on single phase 230V , ACSupply along withhot & cooled high pressure pipes heavy duty branded PVC connection pipe of size 600 mm long & pair of 15 mm dia heavy duty PVC connections minimum 450 mm long suitable for both inlet & outlet hot water fixed with brass adopter / union washer both sidesfixed as per manufacturers instructions , making necessary connections & testing on completion complete all as directed. (Note :(i) The old geysers & its accessories shall be deposited toE/M Store yard with out any extra cost toGovt. (ii)Quoted rate is deemed tobe inclusive of, 600 mm long PVC connection pipe &Pair of PVC connections). |
| 133 | Material and labour for earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m deep below normal ground level and connected to and including galvanized iron earth wire 6 mm dia by means of GI nuts, bolts, check nuts, washers thimbles, etc as shown in electrical plate No 3 of SSR Part-I and connection to main switch board/Test point/panel/equipment and testing on completion including excavation and earth work in any type of soil, returning filling in, and removal of surplus spoil to a distance not exc 50 metre,charcoal and salt in alternate layer 15 cm thick all around the earth plate electrode, MS funnel with wire mesh, GI pipe medium grade 20 mm bore for watering and 15 mm bore 3.00 metre long GI pipe light grade for earth wire protection fixed with poles with two clamps, made from MS flat 25 mmx3mm, bolts, nuts and washers,PCCchamber (1:3:6) type C1, 40mm thick precast RCC cover 1:2:4 type B1 shall be provided on CI frame etc complete all as specified & as directed |
| 134 | M&L for Sand cushioning/sand coveringfor underground cable protection complete all as specified.Note: Punned thickness only will be measured and paid. |
| 135 | Supply and laying sub class \"B\" bricks of old size (standard size as per local availability) laid along alignment of cable as protection to cable in trenches complete all as specified and directed by Engineer-in-Charge |
| 136 | S&Fmild steel galvanized pipe light gradefor protection &passing of LT cable fixed to poles/walls/laid under floor/roads complete including fittings/clamps as required at site all as specified for size of 50mm bore dia. |
| 137 | Supply, fixing ,Teting and commissioning XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables ( heavy duty) with stranded aluminum conductor, 1100Volt grade on walls with fixing acessories of25 Sqmm 4 Core all as specified and directed. |
| 138 | S&F in repair of sheet metal enclousureof size 800 x 400x 200 mm grouted on wall / floor withPCC 1:3:6 type C2 concrete withnecessarynuts & bolts box made out of 2.0 mm thixk CRCA sheet having seven Nos of chambers for housing of one energy meters & SPN MCBwithpeeping glass fixed pVC frame & one MCBSPN with fixing rails & suitable bus bar chamber for fixinf 4 Nos aluminium strips 300 Amps capacity each , making holes for fixing aluminium lugs , complete internalwiring with 6 Sqmm multistandard copper cable FRLSH , epoxy based bakelite sheet of suitable forfixing energy meters & MCBs including locking system withduplicate keys of chamber complete al as directed. |
