|
| 1 | M&L Brickwork with Fly ash bricks, straight or curved on plan exc 6m mean radius in CM 1:4 complete all as specified and as directed. |
| 2 | Material and labour for plastering 15 mm thick on fair faces of brick wall or stone surfaces in cement mortar 1:4 with integral water proofing compound finished even and smooth without using extra cement complete all as specified and directed.Note: Water proofing compound shall be measured and paid for separately. |
| 3 | Supply only liquid water proofing compound conforming to IS 2645:2003 complete all as specified and as directed. |
| 4 | Material and labour for plastering 15 mm thick on fair faces of brick work or concrete surfaces (on vertical surfaces) in cement mortar 1:6 finished even and fair complete all as specified and as directed. |
| 5 | M&L dark shed vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchover 15 mm thick 1:6 cement mortar screed bed over 25 mm thick cement concrete (1:2:4) type B1 as in floor complete all as specified and directed compete all as specified and directed. |
| 6 | M&L PCC 1:2:4 type B1 type (using 20 mm graded crushed stone aggregate) as in foundation filling and mass concrete etc complete all as specified and directed. |
| 7 | M&L PCC 1:2:4 type B1 using (20mm graded stone aggregate) as in coping incl all necessary form work as required, complete all as specified and as directed. |
| 8 | Supply and fixing factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 42x50 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as per directions of Engineer-in-charge |
| 9 | Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick glazing withselected quality glass. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) |
| 10 | Providing and fixing factory made uPVG white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware.EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) (A) Area not exceeding 2.00 sqm each |
| 11 | Providing and fixing factory made uPVC white colour fixed window made of extruded profiles with wall thickness of 2.3mm(+-0.2mm). Window profile with hollow section with multi chamber. Frame (60mm x 58mm). T profile (Onevertical length in between twoshutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. makingarrangement for fixing of hardware, EPDM gasket. 1.2 +–0.2mm thick, galvanized steel Frame (28mm x 21.5mm), T profile (27mm x 17 mrn) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners- 5mm thick glazing withselected quality glass (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories Net opening will be measured for payment purpose.)(a) Area exceeding 2.00 sqm each |
| 12 | S&F 6.4 mm thick rough cast wired glass for effective reduction of noise levels and glazing with anodised aluminium glazing in PVC gasket exc 1.0 Sqm and not exc 1.5 sqm in each pane. |
| 13 | Supply & Fixing for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc..conforming to Fe.290.Gde-E-165 |
| 14 | S & F for plates(plain or chequered) Fe-290 grade E-165 channels, square cut or notched(ordinary and counter shunk) forming holes, without any attachement fixed with and including nutwasher completed all asspecified and directed |
| 15 | Supply & Fixingfor Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/chadding to wall, fixed with self tapping screws as specified. |
| 16 | Supply & Fixingfor Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/chadding to wall, ficed with self tapping screws as specified as in ridges. |
| 17 | M&L Applying two coats of anti fungal weather proof coats on new plastered wall surface including one coat of primer and one coat putty complete all as specified. |
| 18 | Material and labour for preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed by the Engr-in-Charge. |
| 19 | Supply and fixed PVC fluted wall panelling section of size 10mm X 300mm with wall thickness of 0.80mm±0.2mm (per Sq mtr). Weight is 4.90kg±4%), each section consist of 10 groves equidistant at 25mm of 4mm depth and a width of 5mm. |
| 20 | M&L for Concealed point wiring with 1.5 sqmm PVC insulated FRLSH sheathed 1100 Volts grade copper multi stranded conductor drawn through and including rigid PVC conduit 20 mm dia concealed in walls ,roofs, etc including 1.5 sqmm PVC insulated copper conductor as earth continuity conductor and other accesories such as metal box, sheet cover, screws,nuts etc connecting it to the common earth dolly all as specified for one light/ceiling fan/Exhaust fan / wall fan each controller by one way switch |
| 21 | All as per item no 20 but one 3 pin 5 Amps socket outlet on same board controlled by one switch |
| 22 | All as per item no 20 but one 3 pin 5 Amps socket outlet independent controlled by one switch |
| 23 | All as per item no 1 here in before but with 4.0 sqmm cable copper for 15/16 Amps socket outlet on independent board,including 4.0 sqmm copper conductor PVC insulated sheathed continuous earth wire and connecting to common earth dolly ( forgeyser) complete all as specified and as directed. |
| 24 | M & L Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed as required in PVC Conduit conceiled type2x4.0 sq.mm + 1x4.0 sq. mm for earth wire all as specified and directed |
| 25 | M & L Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed as required in PVC Conduit min 25 mm conceiled type2x6.0 sq.mm + 1x6.0 sq. mm for earth wire all as specified and directed |
| 26 | M & L Switch Modular type single pole, one way 6 Amp |
| 27 | M & L Socket, 6A - 2/3 pin combined 2 module |
| 28 | M & L Modular Switch socket combination including metal box/PVC Box and cover plateoutlet 3 pin 6 amp\" flush type combined 3 module |
| 29 | M & L modular Switch socket combination including metal box and cover plate multipurpose 3 pin, 16 amp and one pin, 6 amp controlled by one switch 3 module |
| 30 | S & F Modular White cover plate with frame 8 M/12 M |
| 31 | S & F Metal/PVC flush box 8/12module as per site requirement |
| 32 | Supply and fixing SP 6-32 amp rating 240V, 10KA \"C\" curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning. |
| 33 | Supply and fixing SPN 40-63 amp rating 240V, 10KA \"C\" curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning. |
| 34 | Supply and fix 12 way SPN Double door DB with 200 amps rated bus bar complete with connection testing and commissioning. |
| 35 | S & F 2x2 recessed type LED 36 Watt light with efficacy >120 L/W, alongwith all connected acessories and required fixtures. complete all as specified and directed. |
| 36 | Supply and fixing BLDC base technology ceiling fan 1200 mm,(five-star rated as per BEE) min RPM 350, min air delivery 210 m3/min, 26-32 watt, 50 Hz, 220-240 V with remote control ceiling fan including fixing arrangement of any type complete all as directed and as speified. |
