|
| 1 | Miscellaneous Civil works at 50 MW- SCCL power plant site, Ramagundam |
| 2 | Earthwork in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan) inlcuding dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m. All kinds of soil. |
| 3 | Filling available excavated excavated earth (excluding rock) in trenches, plinth, sides of foundation, etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift. |
| 4 | Demolishing cement concrete 1:3:6 +Demolishing cement concrete manually/ by mechanical means including disposal of material to the nearest identified bin inside factory premises as per direction of Engineer In-charge. Nominal concrete 1:3:6 or richer mix (including equivalent design mix). |
| 5 | Demolishing cement concrete 1:4:8 -Demolishing cement concrete manually/ by mechanical means including disposal of material to the nearest identified bin inside factory premises as per direction of Engineer In-charge. Nominal concrete 1:4:8 or leaner mix (including equivalent design mix). |
| 6 | Dismantling roofingDismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material to the identified location inside factory premises of Asbestos Cement Sheets. Including chipping off the sheets embedded in the side wall and making grooves for fixing new sheet. |
| 7 | Dismantling aluminium/ Gypsum partitionsDismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. |
| 8 | Demolishing stone rubble masonryDemolishing stone rubble masonry manually/ by mechanical means including stacking of servicable materials and disposal of unservicable materials within 50 meters lead as per direction of Engineer In-charge: In cement mortar. |
| 9 | Cement concrete of 1:4:8 gradeProviding and laying in position cement concrete of 1:4:8 grade (1 cement : 4 coarse sand (Zone - III) derived from natural source : 8 graded stone aggregate 40mm nominal size derived from natural sources) excluding the cost of centering and shuttering- All work up to plinth level. |
| 10 | Coursed rubble masonry 1:6Coursed rubble masonry with hard stone in foundation and plint with cement mortar 1:6 (1 cement : 6 coarse sand) |
| 11 | Cement concrete 1: 1.5: 3Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1: 1.5: 3 (1 cement : 1.5 coarse sand (zone - III) derived from natural sources : 3 graded stone aggregate 20mm nominal size derived from natural sources) |
| 12 | RCC 1:1.5:3Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - 1:1.5:3 (1 cement : 1.5 coarse sand (zone - III) derived from natural sources : 3 graded stone aggregate 20mm nominal size derived from natural sources). |
| 13 | Centering amd shuttering-FoundationCentering and shuttering including strutting, propping etc. and removal of form work for Foundations, footings, bases of columns etc. for mass concrete. |
| 14 | Centering &shuttering slab edge,lintelCentering and shuttering including strutting, propping etc. and removal of form work for Edges of slabs, lintels and breaks in floors and walls. |
| 15 | Centering and shuttering-StairCentering and shuttering including strutting, propping etc. and removal of form work for Stairs (including landing) |
| 16 | 0.8mm Deck SheetProviding and fixing roofing consist of 0.8 mm thick galvanized steel deck sheet confirming to IS 277:1992 used as permanent shuttering over which MS wire mesh 3mm laid at 100x100 mm grid including edge trim covered with concrete. This metal deck will be supported on structural steel beam with shear studs. (Structural steel like Beam, column, joists etc. & concrete of different grade as per design will be paid separately). |
| 17 | Structural steel work riveted, boltedStructural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 18 | Steel work welded in built up sections/Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete |
| 19 | Steel reinforcement for R.C.C. workSteel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto all level. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 20 | Painting with synthetic enamel paintPainting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work. |
| 21 | Brick work CM 1:4Brick work with common burnt clay F.P.S. (non-modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement Mortar1:4 (1 cement : 4 coarse sand). |
| 22 | Precast concrete solid blocksProviding and laying factory made Precast concrete solid blocks of 200 mm thickness of grade M10 made of C&D waste from approved manufacturer in superstructure above plinth level up to floor V level: Cement mortar 1:6 (1 cement : 6 coarse sand) (For Toilet and internal misc. walls). |
| 23 | 18 mm cement plaster18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster 1:3 (1 cement : 3 coarse sand) finished rough with sponge. EXTERNAL PLASTER |
| 24 | 12 mm cement plaster of mix : 1:612 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand): INTERNAL PLASTER |
| 25 | Vitrified floor tilesProviding and laying vitrified floor tiles in different sizes (thickness should be 8mm) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 30mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm |
| 26 | Anti skid Glazed Ceramic floor tilesProviding and laying anti skid Glazed Ceramic floor tiles of size 300x300 mm or more (thickness should be 8mm), of 1st quality conforming to IS : 15622, of approved make, in colours as approved by Engineer In-charge, laid on 30 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. |
| 27 | Ceramic Glazed Wall TilesProviding and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 28 | Kota Stone Slabs 20mmKota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. |
| 29 | 20mm Granite for kitchen platformProviding and fixing 20 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick basecement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade. |
| 30 | 75x150x18mm Granite Urinal PartitionProviding and fixing stone slab with table rubbed, edges rounded and polished, of size 75x150 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth. Granite Stone of approved shade |
| 31 | Putty 2mmProviding and applying plaster of paris putty of 2 mm thickness of approved brandover plastered surface to prepare the surface even and smooth complete. |
| 32 | Exterior PaintFinishing walls with Acrylic Smooth exterior weather proof paint of required shade :New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior weather proof primer applied @ 2.20 kg/10 sqm) EXTERNAL |
| 33 | Interior Emulsion PaintWall painting with acrylic emulsion paint (for Internal walls), having VOC (Volatile Organic Compound) content less than 50 grams/litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour : Two or more coats on new work |
| 34 | DistemperDistempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 grams/ litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour. New work (2 or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 grams/ litre. |
| 35 | Tiles False ceilingProviding and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main \"T\" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross \"T\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main \"T\" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross \"T\" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texturein the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \"T\" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit. |
| 36 | WPC Door FramesProviding and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58- 60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Frame size 45 x 70 mmNote: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 37 | WPC ShuttersProviding and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: All necessary fittings including stainless steel butt hinges and necessary S.S screws are included). 30 mm thick |
| 38 | AL Work for PartitionProviding and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15 |
| 39 | AL Work for door,window,ventilatorFor shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 40 | Particle Board for AL Partition 12mmProviding and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides |
| 41 | 4mm glass for AL PartitionProviding and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness |
| 42 | 5mm Glass for AL partition doorsProviding and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.00 mm thickness. |
| 43 | AL Tower BoltsProviding and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 300x10 mm |
| 44 | AL Door HandlesProviding and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm |
| 45 | AL Hanging Floor Door stopperProviding and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Single rubber stopper. |
| 46 | Hudraulic Door closerProviding and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. |
| 47 | Rain Water PipesProviding and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter |
| 48 | Bend 87.5 110 mm Shoe for Rain water pipProviding and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5 110 mm Shoe |
| 49 | Shoe (Plain) 110 mm Shoe for RW pipeProviding and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Shoe (Plain) 110 mm Shoe |
| 50 | Roof Slab WaterproofingProviding and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying:(a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm.(b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm.(c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This willbe allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around.(d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately.For the purpose of measurement the entire treated surface will be measured. |
| 51 | Brick tiles for roof waterproofingProviding and laying brick tiles over mumty roofs, grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement, over 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat: With common burnt clay F.P.S. (non modular) brick tiles of class designation 10 |
| 52 | European Water ClosetProviding and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid |
| 53 | Toilet paper holderProviding and fixing approved quality paper holder fix on wall with rawl plugs all materials labours etc., all complete as directed by the Engineer-in-charge.C.P. brass |
| 54 | UrinalProviding and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :One urinal basin with 5 litre white P.V.C. automatic flushing cistern complete as per direction of Engineer In-Charge. |
| 55 | Wash BasinProviding and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps. |
| 56 | 600mmx450mm MirrorProviding and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws hard board backing complete as per direction of Engineer In-Charge.and washers complete. |
| 57 | Towel RailProviding and fixing PTMT TOWEL RAIL complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighting not less than 190 gms. complete as per direction of Engineer In-Charge. |
| 58 | SS Kitchen SinkProviding and fixing Stainless Steel A ISI 304 (18/8) KITCHEN SINKPantry unit of sufficient size with sandwich type of platform with one sink (Nirali Make) plumbing fixtureplumbing fixtureas per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required: 510x1040 mm bowl depth 200 mm complete as per direction of Engineer In-Charge. |
| 59 | 100mm HDPE Pipes Incl. fittingsProviding and fixing High-density polyethylene (HDPE) pipes,including all HDPE pipes & fittings, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 100 mm nominal inner dia Pipes. |
| 60 | 150mm HDPE Pipes incl. fittingsProviding and fixing High-density polyethylene (HDPE) pipes,including all HDPE pipes & fittings, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 150 mm nominal inner dia Pipes. |
| 61 | 25mm GM Gate ValveProviding and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore complete as per direction of Engineer In-Charge. |
| 62 | 15mm Brass Stop CockProviding and fixing brass stop cockof approved design, quality and make 15mm NB complete as per direction of Engineer In-Charge. |
| 63 | 20mm Brass Stop CockProviding and fixing brass stop cockof approved design, quality and make 20mm NB complete as per direction of Engineer In-Charge. |
| 64 | 15mm CPVC Pipes incl. fittingsProviding and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal outer dia Pipes |
| 65 | 20mm CPVC pipes incl. fittingsProviding and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal outer dia Pipes |
| 66 | 25mm CPVC Pipes incl. fittingsProviding and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 25 mm nominal outer dia Pipes |
| 67 | 15mm Brass Bib cockProviding and fixing brass bib cock of approved quality:15 mm nominal bore complete as per direction of Engineer In-Charge. |
| 68 | 0.5mm PCGI roofing sheetProviding and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrogation as approved by Engineer In-charge) of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with zinc coating 120grams per sqm as per IS: 277, in 240MPa Steel grade, 5-7 micron epoxy primer on both sides of the sheet and the polyester top coat 15-18 microns. Sheets shoud have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 metre or as desired by Engineer In-charge. The sheet shall be fixed using self drilling/ self tapping screws of size (5.5x55mm) with EPDM seal, complete up to any pitch horizontal, vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. Also including inserting the sheets into the side wall grooves and packing it using Cement Mortar 1:4 including the cost of all materials and labour. |
| 69 | Vertical blindsProviding and fixing vertical blind of approved color and brand cost is inclusing of supply of materials, fixing, labour charges, transportation all leads, lifts, taxes etc. complete at all height and levels complete as per direction of Engineer In-Charge. |
| 70 | 2x2 LED FittingSupply of 2x2 LED Fitting, Minimum 24Wits Installation in False Ceilingwith hanging chain supports and Wiringforlight point with 2.5 Sqmm FRLS Flexible PVC insulated copper conductor single core cable in PVC conduit with Double Door 12 Way SPN DB and earthing Each LED fittings with 1.5 Sqmm FRLS Flexible PVC insulated copper conductor single core wires as required.Each Row of LED fittings should have 1 MCB (1 Pole) control of suitable rating along with common ELCB for Lighting Circuit.Technical Details for LED Fittings1) Luminary Efficacy : Minimum 100 Lm/W 2) Mounting : Recess -mounting3) Diffuser: High transmittance FULL diffuser for glare free uniform light distribution.4) IP : 20 5) Driver should be inside the LED fitting. |
| 71 | Wall Mounting FanSupply, Installation (In Wall) & Wiring of Wall Mounting Fan with 2.5Sqmm FRLS Flexible PVC insulated copper conductor single core cable in PVC conduit with modular switch, socket ,modular plate suitable GI Box and earthing the point with 1.5 Sqmm FRLS Flexible PVC insulated copper conductor single core wires as required.Wall Mounting Fan Technical Details:Input Power : 220-240VAC/50 HzBlade Material : PlasticNo. of Speed Setting 3No. of Blades : 3Sweep Size : 400 millimeterMotor Winding Material : CopperSpeed: 1000-1500 RPMColor: White |
| 72 | MCB Metal EnclosureSupply, Installation (In Wall) & Wiring of 20A, 2P, C Curv, MCB Metal Enclosure for Single Phase Air Conditioners with 6 Sqmm FRLS Flexible PVC insulated copper , 3 core cable in PVC conduit and earthing the point as required. |
| 73 | Combined Box/Modular BoxSupply, Installation (In Wall) & Wiring of 16A SS, Combined Box/Modular Boxwith (3 Socket & 3 Switches each 16A rating)with 4 Sqmm FRLS Flexible PVC insulated copper , 3 core cable in PVC conduit and earthing the pointas required. |
| 74 | Wiring of modular furnitureSupply of Modular Electrical system and wiring of the modular furniture with the following items with 8 Module in Single Row - 2 Nos and with 2.5 Sqmm FRLS Flexible PVC insulated copper conductor single core wire as required and earthing the point.Item required for Sitting Arrangement of 1 PERSON (1SET)1) Modular Computer Jack (CAT 6) - 1 Module2) ModularTelephone Jack (RJ 11)- 1 Module3) Modular MCB 1 Pole,10A - 1Nos4) Modular 3 Pin Socket, 5A - 5Nos5) Modular SP Switch, 10A -1 NoNOTE: Supply of Double Door 12 Way SPN DB for above modular electrification arrangement to be connected at Distribution Panel to be included. |
| 75 | 18-20W LED Batten and InstallationSupply of18-20W LED Batten its Installation in Ceiling and Wiringforlight point with 1.5 Sqmm FRLS Flexible PVC insulated copper conductor single core wires in PVC conduit with and earthing the point with 1 Sqmm FRLS PVC Flexible insulated copper conductor single core wire as required.LED Batten Technical Details:Length of LED Batten (Nominal) (in mm): 1150Minimum Lumen Efficay : 100lm/Watt Housing Material : PolycarbonateNOTE:1 Circuit should have 3 LED Tubelight control.3 LED Tubelight should have 1 Switchcontrol of suitable rating.Switch Point for Ground Floor will be at 2 location. (Each locations 5 Switches) |
| 76 | 100W LED Flood LightSupply, Installation and Commissiong of 100W LED Flood Light in the Walls outside the Building with 2.5 Sqmm FRLS Flexible PVC insulated copper conductor 3 core cable in PVC conduit with earthing the point as required. PVC Conduits to be fixed on the walls surface.NOTE:1 Circuit should have 2 LED Flood light control with suitable 1P, MCB,6A |
| 77 | 600x600x3.15 mm Copper Plate electrode ESupply and Providing of conventional 600x600x3.15 mm Copper Plate electrode EARTHING. Providing the earth stations with necessary materials, labour,civil works, etc. as per Indian Standard specification IS:3043or latest revision etc.The chamber size shall be 450x450 mm with CI Cover providing meshed funnel,spreading chalk/char coal , salt etc, completely as required. |
| 78 | EARTHING with earth electrode of 4.5mtrSupply and Providing of conventional EARTHING with earth electrode of 4.5mtr long40mm dia G.I pipe (B class)with construction of brick trough,providing meshed funnel, CI coverand other civil Engineering works, spreading chalk/char coal , salt and bolt nutetc, completely as required. as per IS 3043 or latest revision. |
| 79 | 25 mm x 5 mm GI Strip for Body of LT PanSupply and laying of ( 25 mm x 5 mm GI Strip for Body of LT Panels)following size GI strip including all fixing accessoriesfor earth connection from earth electrode inside/outside the buildingwith all necessary interconnections withearth station and equipments. The cost shall also include the supply & installation of Heat Shrinkable PVC black colored sleeves for earthing GI strip. |
| 80 | 400 Sqmm,XLPE, Al, Armoured UG cableLaying of 1.1kV, 3.5 Core, 400 Sqmm,XLPE, Al, Armoured UG cable direct in Ground. The rate shall include excavation ofearth in all types of soil and backfilling including providing bricks and sand. (Cables are in BHEL scope) |
| 81 | End termination with brass double compreSupplying and making End termination with brass double compression gland and Aluminium lugs for following size XLPE conductor cable of 1.1kV grade.3.5C x 400 Sqmm Aluminium Cable (With Aluminium Lugs) as required. |
| 82 | 500 A LV Cable termination junctionDesign, fabrication, supply of 500 A LV Cable termination junction (Alu Bus Bar) box- Indoor Type.The box shall be suitable for 3 ph. 415 volts, AC, 4 wire system, fabreicated out of 2 mm CRCA sheet with necessary MS Angle supports, cubical/ compartment construction.RAL7032 colour powder coating/ enamel paint finish. The bus bars shall be 50 x 10 mm Aluminium with RYB colour PVC Sleeves.Necessary angle with FRP/ DMC supports shall be provided.(For termination of 3.5C, Armoured, 400Sqmm incomer cables) |
| 83 | 400A, 4P,MCCB,36kASupply, Installation & Commissioning of 400A, 4P,MCCB,36kA with suitable enclosure. |
| 84 | erection and wiring of LED Street LightSupply, erection and wiring of LED Street Light 100W around building with Single Arm 6.5 Meter Height, Street Light Poles including base plate 250x250x12 and 4 Nos of foundation bolts M16x600 with 2 Pole 10 A MCB. Supply, laying and termination of 4 Sqmm 4C, Armoured, Copper cable. Fixing of poles with RCC footing of size 400x400 depth 750mm including cement concrete.Including Supply of 4P MCB Loop in Loop Out with IP 65 enclosure.Distance betwen the pole : 15 |
| 85 | 6Way Double Door TPN DB with 63A, 4P,C CSupply, Installtion & Commissioning of 6Way Double Door TPN DB with 63A, 4P,C Curv Incomer MCB. Outgoing MCBs : 20A, SP,C Curv. (2 Nos for Air Conditioners and 1 No for 16A SS Points and 1 No for Lighting & Fans) |
| 86 | MAIN LT POWER DISTRIBUTION PANEL 415V,3PMAIN LT POWER DISTRIBUTION PANEL 415V,3PhPANEL TECHNICAL DETAILS:Voltage Rating (AC): 415V ±10% AC, 3Ph,4Wire. Frequency:50Hz ±1%.Incomer: Bottom Entry for 3.5 C, 400 Sqmm, Armoured Al Cable, 1 RUN. Outgoing: TOP Entry Bus bars shall be 50 x 10 mm Aluminium with RYB color PVC sleeves. Necessary angle with FRP/DMC supports shall be provided.1 )Busbar Material:High Conductivity Aluminium 2 )Busbar Grade : E-91E/63401 WP as per IS:50823 )Earth Bus & Size 50x6 mm2 Aluminium (The Horizontal Earth bus shall project out of the panel and shall have at least Two holes for earth connections)METERINGPanels should have meterng facility for Voltage, Current & Power Consumption (kWh) - MFM to be provided.96Sqmm Analog Voltmeter (0-500V AC, CL 1.0 with VSS) , 96Sqmm Analog Ammeter (0-400A AC, CL 1.0 with CT Secondary 5A)RYB Indication Lamps with ON,OFF & TRIP Indication Lamps for Incomer and Outgoing. 6A 3P TP MCB and Neutral LinkShrouding Material: Transparent Acrylic/ FRP SheetBusbar I/C & O/G Insulating Sleeves:Heat Shrinkable PVC InsulatedColor of Insulating Sleeves :R Phase-Red, Y Phase- Yellow, B Phase- Blue & Neutral-BlackSheet Thickness as follows:a) Load Bearing Members 2 mm CRCA b) Doors & Covers 2 mm CRCA c) Non-Load Bearing Members 2 mm CRCA d) Base Frame 3 mm CRCA (Min 120mm Height) e) Gland Plate 3 mm CRCAMinimum Clearance between Vertical/Horizontal/Main Busbars & MCCB Bus Linksa) Phase to Phase 25 MM b) Phase to Neutral 19 MM c) Phase to Earth 19 MM d) Neutral to Earth 19 MMINCOMER:1) 400A, 4P,MCCB,36kA - 1 Nos OUTGOINGS FEEDERS:1) LIGHTING FEEDER (100A,4P,MCCB,18kA)- 1Nos2) Air Conditioners FEEDER (160A,4P,MCCB,18kA)- 1Nos3) Plug Point FEEDER (100A,4P, MCCB,18kA) - 1Nos4) SPARE FEEDER (100A,4P,MCCB,18kA) - 2Nos |
