|
| 1 | Excavation in foundation for retaining & brest walls in all types of soils and rocks including lead, lift and disposal of surplus material as per direction of engineer-in-charge. |
| 2 | Excavation in Hard rock (blasting prohibited) Upto 3 m depth including 1.5 m depth |
| 3 | Slip clearance (by manual means) of earth and boulders including disposal complete as directed by the Engineer-in-charge. |
| 4 | Providing concrete for plain/reinforced concrete in open foundations; P.C.C grade M 10. Nominal mix 1:3.6 |
| 5 | Providing and laying cement concrete in substructure complete as per drawings and technical specification including supply of all material, labour, T&P and royaltiies etc. (Work includes cost of formworks). P.C.C. grade M 20. |
| 6 | Providing and laying cement concrete in substructure complete as per drawings and technical specification including supply of all material, labour, T&P and royaltiies etc. (Work includes cost of formworks). R.C.C. grade M 20. |
| 7 | Random Rubble Stone Masonry laid in 1:6 cement and sand mortar, in breast walls, retaining walls, parapets, scuppers, etc. including supply of all material, labour, T&P and royaltiies etc. |
| 8 | Random Rubble Masonary laid dry in breast wall, retaining wall, parapets,scupper etc. including supply of all material, labour, T&P etc. required for proper completion of the work. |
| 9 | HP stone filling in back of walls including supply of all material, labour, T&P etc. required for proper completion of the work. |
| 10 | Cement plum Masonry with 40% plum & 60% 1:3:6 cement concrete including supply of all material, labour, T&P etc. required for proper completion of the work. |
| 11 | Providing and Laying of Mechanically Woven Double Twisted Hexagonal shaped Gabions of galvanized steel, of size 3mX1mX1m with two diaphragms at 1m interval, having mesh opening 100mmx120 mm, mesh wire diameter 3 mm for gabions, edge/selvedge wire diameter 3.9 mm and lacing wire diameter 2.2 mm. (The work includes filling boulders in the gabions). |
| 12 | Engagement of Mazdoor (Skilled) as and when required and directed by the Engineer-in-charge. |
| 13 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 14 | Providing and applying 12 mm thick cement plaster 1:4 (1 cement : 4 coarse sand) including supply of all material, labour, T&P etc. required for proper completion of the work. |
| 15 | Providing and applying 15 mm thick cement plaster 1:4 (1 cement : 4 coarse sand) including supply of all material, labour, T&P etc. required for proper completion of the work. |
| 16 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 17 | Finishing walls with textured exterior paint of required shade New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm |
| 18 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture |
| 19 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required |
| 20 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. |
| 21 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter PVC Pipe |
