General-Proj.No. 211/24-25 Ayurveda Hospital Maintenance-In T V Puram Gp Ward 8-General Civil Work - Maintenance Of Hospital 2 21.1.1.1:Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tu, Puram-Kerala
TDR : 47441048
Tender Notice
Corrigendum Details
BOQ
Expired
Puram
Kerala
Corrigendum : General-Proj.No. 211/24-25 Ayurveda Hospital Maintenance-In T V Puram Gp Ward 8-General Civil Work - Maintenance Of Hospital 2 21.1.1.1:Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tu
Work Name:GENERAL-PROJ.NO. 211/24-25 AYURVEDA HOSPITAL MAINTENANCE-IN T V PURAM GP WARD 8-General Civil Work
Sl. No.
Item Description
1
maintenance of hospital
2
21.1.1.1:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionAnodised aluminium (anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15)
3
21.3.2:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness
4
OD388578/2024-2025:providing Oxidised mild steel single acting spring hinges 100 mmon Aluminum doors and window shutters
5
OD388579/2024-2025:providing Oxidised mild steel handles 75 mm for kitchen cabinet, racks etc
6
21.2.1:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side
7
OD388852/2024-2025:Providing and fixing - ACP board of 4 mm thick in panelling fixed in aluminiumdoors,windows shutters and partition frames with CP brass/stainless steel screws etc . completeas per architectural drawings and directions of Engineer - in charge.Details of cost for 7 sqmMATERIAL:3mm thick ACP board= 7.00 sqmAdd 5%wastage = 0.35sqmTotal = 7.35 sqm ACP board of 3 mm thick
8
21.8.1:Filling the gap in between aluminium frame & adjacent RCC/ Brick / Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawing and direction of Engineer-in -Charge complete.Upto 5 mm depth and 5 mm width
9
10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
