|
| 1 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats(Two coats)wherever required to achieve even shade and colour. |
| 2 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 3 | EXTERIOR PAINTING : Wall painting with acrylic emulsion paint, having VOC(Volatile Organic Compound)content less than 50 grams/liter, of approved brand and manufacture, including applyingadditional coats wherever required to achieve even shade and colour (i)Two coats (over oldantifungal weather coat painted wall surface) |
| 4 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: (i) One ORmore coats on old work (Steel, steel based and wooden & wood based surface) |
| 5 | Distempering with 1st quality acrylic distemper (ready mix) having VOC content less than 50 grams/litre of approved brand and manufacture to give an even shade:On old work (One OR more coats) |
| 6 | Paintinting (one ormore coats) on rain water, soil waste and vent pipes and fittings with black anticorrosive bitumastic paint of approved brand and manufactureon old work (i) 100 mm dia pipes |
| 7 | Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. (i) Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides |
| 8 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. (i) Double charge vitrified tile polished finish of size : 600x 1200 mm |
| 9 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joint with white cement & matching pigments etc. complete.(i) Size of Tile 500x500 mm |
| 10 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.(I) Glazed Vitrified tiles Matt/Antiskid finish of (a) Size of Tile 600 x 600 mm |
| 11 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge :(i) Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. |
| 12 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 Sqm and under , including cutting the patche in proper shape, racking out the joints and preparation and plastering the surface of the walls complete, including disposal of rubish to the dumping ground, all complete as per direction of Engineer-in-Charge.With Cement mortar 1:4 (1 Cement : 4 Fine Sand) |
| 13 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. (i) 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 14 | Providing and fixing 18mm thick both sides Pre-laminated cement bonded wood particle board as per IS : 15786:2008 of approved brand and shadewith suitable full threaded steel screws etc. in partitions, boxes, shelves, racks and cupboard, kitchen cabinet under kitchen counter etc. all complete as per direction of Engineer-in-charge (Note: Fittings to be paid separately).18 mm Thick |
| 15 | Providing and fixing 25 mm thick shutters for cup board etc. :(i) Panelled or panelled & glazed shutters (a) Second class teak wood including ISI marked anodised aluminium butt hinges with necessary screws |
| 16 | Providing and fixing Pre-laminated 3 layer particle board (medium density) particle boardor gradded wood particle board IS :3087 marked, with one side decorative and other side balancing lamination Grade 1, Type-II exterior grade IS : 12833 marked, in shelves with screws and fittings whereever required, edges to be painted with polyurethane primer (fittings to be measured and paid separately)(i) 18 mm thick |
| 17 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). (i) Second class teak wood |
| 18 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to be required colour os shade, with necessary screws etc, complete(i) 250 mm x 10 mm |
| 19 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to be required colour os shade, with necessary screws etc, complete(ii) 200 mm x 10 mm |
| 20 | Providing and fixing aluminium sliding doorbolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to be required colour os shade, with necessary screws etc, complete(i) 250 mm x 16 mm |
| 21 | Providing and fixing aluminium handles ofdoorbolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to be required colour os shade, with necessary screws etc, complete(i) 125 mm |
| 22 | Providing and fixing aluminium handles ofdoorbolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to be required colour os shade, with necessary screws etc, complete(ii) 100 mm |
| 23 | Providing wood work in frames of false ceiling , partitionsetc. Sawn and fixed in position with necessary stainless steel screws etc,(i)Kiln seasoned and chemically treated hollok wood |
| 24 | Providing and Fixing factory made uPVC door frame, made of uPVC exturded sections, of size 65 mm x 55 mm with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be mitred cut and jointed with plastic brackets and stainless steel screws, reinforcing hinge side vertical of the frames with PVC profile of Size 28 mm x 30 mm having wall thickness 2 mm (±0.2 mm), including providing & fixing 3 nos of 125 mm long stainless steel hinges to the frame, fixing the frame with jamb with required number & size of anchor dash fastners, all complete as per manufacturer\"s specification and direction of Engineer-in-charge |
| 25 | 35 mm thick factory made Solid panel PVC Door shutter, made out of single piece extruded soild PVC profiles, 5 mm (± 0.2 mm) thick, having styles & rails (except lock rail) of size 95 mmx 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm X 20 mm x 1 mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mm X 100 mm of cross section size 35 mm x 17 mm x 1 mm at each corner. Single piece extruded 5 mm thick solid PVC Lock rail of size 115 mm x 35 mm, out of which 75 mm to be flat and 20 mm to be tapered at both ends, having 15 mm solid core in middle of rail section integrally extruded, fixing the styles & rails with the help of solvent and self driven self tapping screws of 125 mm x 11 mm, including providing 5 mm Single piece solid PVC extruded sheet inserted in the door as panel, all complete as per manufacturer\"s specification and direction of Enginee rin- charge(II) Decorative finish (wood grained finish) |
| 26 | Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws :(i) 35 thick shutter (a)with ISI marked M.S. pressed butt hinges bright finished of required size(b) WithSecond class teak wood |
| 27 | Providing and fixing nickel plated M.S. pipe curtain rods with(i) 20mm dia |
| 28 | Providing and fixing 18 mm thick, 150 mm wide pelmet of flat pressed 3 layer or graded wood particle board medium density grade I, IS : 3087 marked, including top cover of 6 mm commercial ply wood conforming to IS: 303 BWR grade, nickel plated M.S. pipe 20 mm dia ( heavy type) curtain rod with nickel plated brackets, including fixing with 25x3 mmM.S. flat 10 cm long fixed to pelmet with hollock wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. all complete. |
| 29 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. |
| 30 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work upto plinth level in 1:3:6 grade of concrete |
| 31 | Providing and fixing plain multipurpose cement board (Hight pressure steam cured) with suitable screws for cement particle board in ceiling etc. complete (frame work to be paid seperatately). (I) 6 mm thick Cement bonded wood particle board as per IS:14276 |
| 32 | Providing and fixing on wall face unplasticated Rigid PVC rain water pipes conforming to IS:13592 Type-A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion (i) Single socket pipes.(i) 110 mm diameter |
| 33 | Providing and fixing on wall face unplasticated PVCClipsapproved design to unplasticated-PVC rain water pipes by means of 50x50x50 mm hard woodplugs, screwed with M.S screws of required length, including cutting brick work and fixing the cement mortar 1:4(1 cement : 4 coarse sand) and making good the wall etc. complete.(i) 110mm |
| 34 | Providing and fixing soil,waste and vent pipe:(i) 100 mm dia pipesSand cast iron S&S pipe as per IS:1729 |
| 35 | Providing and filling the joints with spun yarn,cement slurry and cement mortar 1:2 (1 cement : 2 fine sand) in S.C.I/C.I Pipes(i) 100 mm dia pipe |
| 36 | Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. :(a) 100 mm dia pipe |
| 37 | Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.(a) 100 mm dia pipe(i) Sand cast iron S&S as per IS:1729 |
| 38 | Providing and fixing plain bend of required degree.(a) 100 mm dia pipe(i) Sand cast ironS&S as per IS:1729 |
| 39 | Providing and fixing single equal plain junction of required degree:(a) 100x100x100 mm(i) Sand cast iron S&S as per IS:1729 |
| 40 | Providing and fixing single equal plainjunction of required degre with access door,insertion rubberwasher 3 mm thick,bolts and nuts complete(i) 100 x100 x100 mmSand cast iron S&S as per IS:1729 |
| 41 | Providing lead joints caulked joints to sand cast iron pipes and fittings to dia :(i) 100 mm |
| 42 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Semi rigid Pipe(i)32 mm dia |
| 43 | Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour.Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 gms |
| 44 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.(i)10 litre capacity - White each |
| 45 | Providing and fixing uplasticised PVC connection pipe with brass unions :(a)30 cm length(i)15 mm nominal bore |
| 46 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.(i) 15 mm nominal bore |
| 47 | Providing and fixing C.P. brass bib cock of approved quality conformingto IS:8931 :(i) 15 mm nominal bore |
| 48 | Providing and fixing C.P. brass angle valve for basin mixer and geyserpoints of approved quality conforming to IS:8931(i)15mm nominal bore |
| 49 | Providing and fixing PTMT grating of approved quality and colour.Circular type(i) 100 mm nominal dia |
| 50 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall :(ii) 20mm dia nominal bore |
| 51 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work - Exposed on wall (i) 25 mm dia |
| 52 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps,including cutting and making good the walls etc.Internal work - Exposed on wall (i) 40mm dia |
| 53 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :(i) 25 mm nominal bore |
| 54 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :(i) 40 mm nominal bore |
| 55 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4 mm thick glass panes |
| 56 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. |
| 57 | Demolishing R.B. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- charge. |
| 58 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: (i) GS Sheet |
| 59 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 60 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :Barge board (Upto 300 mm) |
| 61 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridge plain (500-600 mm) |
| 62 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. (i)Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 63 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.(i) for thickness from 10 mm to 25 mm |
| 64 | Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge. |
| 65 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) (i) with Second class teak wood (a) 35 mm thick shutter |
| 66 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:(i) White Vitreous China Wash basin size 630x450 mm (i) with a pair of 15 mm C.P. brass pillar taps |
| 67 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:(i) White Vitreous China Wash basin size 630x450 mm (i) with a single15 mm C.P. brass pillar taps |
| 68 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : (i) Oval shape 450x350 mm (outer dimensions) |
| 69 | Providing and fixing toilet paper holder : (i) CPbrass |
| 70 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. (i) 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. |
| 71 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. |
| 72 | Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. |
| 73 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. |
| 74 | Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan. |
| 75 | Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. |
| 76 | Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (i) 15 mm nominal bore |
| 77 | Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge |
| 78 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: (i) White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
| 79 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : (i)150 mm diameter |
| 80 | Dismantling of manhole including R.C.C. top slab, C.I. cover with frame, including stacking of useful materials near the site and disposal of unserviceable materials within 50 m lead as per direction of Engineer-in-charge:Rectangular Manhole 90x80 cm and 45 cm deep |
| 81 | Raising manhole cover and frame slab to required level including dismantling existing slab and making good the damage as required (Raising depth of manhole to be paid separately) : (i) Rectangular manhole 90x80 cm with rectangular cover 600 x 450 mm of grade LD - 2.5 |
| 82 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 83 | Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of:(I) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.(II) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (III) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area.(IV) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to eachother with bitumen @ 1.7 kg/sqm). |
| 84 | Providingandfixing18mmthickbothsidesPre-laminatedcementbondedwoodparticleboardasperIS:15786:2008ofapprovedbrandandshadewithsuitablefullthreadedsteelscrews,etcinpartition, boxes,shelves,racksandcupboard,kitchencabinetunderkitchencounteretcallcompleteasperdirectionofEngineer-in-charge (Note: Fittingtobepaidseperately). (i) 18 mm thick |
| 85 | ProvidingandfixingstainlesssteelfancyhandleofapprovedmakefixedwithSSscrewsetc complete asperdirectionofEngineer-in-charge.(i) 200 mm |
| 86 | Providingandfixingstainlesssteelsoftclosingspringhingesat0degree hinges (hydraulictype)ofapprovedmake/brandtocupboardshutterswithfullthreadedsteelscrewsincludingmakingnecessaryrecessinboardandfinished etccomplete asperdirection ofEngineer-in-charge. |
| 87 | Providingandfixingstainlesssteel softclosingheavytypetelescopicdrawerchannelsofapprovedmake500mmlongwithscrews.CompleteasperdirectionofEngineer-in-charge. |
| 88 | Providingandfixingreadymade304gradestainlesssteel modularkitchenbasketandaccessoriessuchasrightanglebasket(plaincup &saucer, plant,partition,bottlerack,thali,cutlery)kitchenutencilbasket,dinnersetbasket,kitchengrainbasket,multipurposebasketaspersiterequirementincluding finishing(whereverrequired)andfittings.Thesamehallbefixedwithnecessarystainlesssteelnuts&bolts,stainlesssteelscrews &telescopicchalleletcasperdirectionofEngineer-in-charge.(Forpaymentpurposeonlyweightofstainlesssteelbasketshallbeconsideredexcludingweightofallfixingaccessoriessuchasnuts,bolts,fasteners,telescopicbasketchannels,etc.Paymentofprovidingandfixingoftelescopicchannelsshall bemadeseperately) |
| 89 | Providingandfixing2mmthick16to19 mmwidePVCedgebindingtapeofapprovedqualityforcupboard/wardrobeshutters includingnecessarysyntheticresinhotpressedtoedgesonbindingmachineetccompleteasperdirectionofEngineer-in-charge. |
| 90 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 91 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore |
| 92 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore |
| 93 | Providing and fixing unplasticised P.V.C. connection pipe with PTMT15 mm nominal bore with 45 cm length |
| 94 | Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. |
| 95 | Renewing glass panes, with wooden fillets wherever necessary(i) Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) |
| 96 | Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: 2.35.3.1 With Chlorpyriphos/Lindane E.C. 20% with 1% concentration |
| 97 | Treatment of existing masonry using chemical emulsion @ one litre per hole at 300 mm interval including drilling holes at 45 degree and plugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to the full depth of the hole : With Chlorpyriphos/Lindane E.C. 20% with 1% concentration |
| 98 | Treatment at points of contact of wood work by chemical emulsion Chlorpyriphos/ Lindane (in oil or kerosene based solution) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same. |
