|
| 1 | Dismantling asbestos cement (corrugated, semi corrugatedsheets in roof coverings including ridges completeall as specified and directed. |
| 2 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated coloured steel sheet, 0.50mm thick having tensile strength of 550 mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed. |
| 3 | S&F pre-painted galvalume aluminium zinc coating GI based plain steel coloured sheet, 0.50mm thick having tensile strength of 550 mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed. |
| 4 | Dismantling timber scantlings 40 Sqcm and over in section in framed work in any position complete all as speciifed and directed. |
| 5 | S&F rolled mild steel work in roof trusses (framed), trussed, purlins, crane gantries, pillars, rails and fastenings and heavy bracket framing (beam, tee, angle, channel, Hollowor flat sections) including distance pieces, cleats etc. conforming toFe 410-W (Gde - E-250) quality - A complete all as specified and directed. |
| 6 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation board/slabs/blankets/AC boards etc any thickness complete all as specified and directed. |
| 7 | M&L for Providing and fixing tiled false ceiling using 8 mm thick fully perforated calcium silicate board of size 595x595 mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams/ sqm, both sideinclusive) complete all as specified and directed.NOTE :-(i) Grid shall consist of main \"T\" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and(ii) Cross \"T\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main \"T\" at 600 mm center to center to form a grid of 1200x600 mm and(iii) Secondary cross \"T\" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600 x 600mm and(iv) Wall angle of size 24x24x0.3 mm to be fixed on wall with the help of rawl plug and |
| 8 | Contd/...(v) Main \"T\" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T and (vi) Bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint.(vii) laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. (viii) Perforated calcium silicate board shall be made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process to give stable crystalline structure with minimum compressive strength 225 kg/ sq. cm. Bending strength shall not be less than 100 kg/sq. cm , of size 595x595 mm, having perforation of dia. 10 mm with minimum perforated area 18 % with non woven tissue on the back side, having an NRC ( Noise Reduction Coefficient) of 0.85, with 50 mm thick rockwool of 48 kg /cum backing. |
| 9 | Demolition of brickwork built in cement or cement lime mortar complete all as speciifed and directed. |
| 10 | M&L for brick work with old size sub class B bricks, straight or curved on plan exc 6m mean radius built in CM 1: 6 complete all as specified and as directed. |
| 11 | Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level ) complete all as specified and as directed. |
| 12 | M&L for 75 mm thick PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) as in plinth protection, finishing cement concrete surface even and smooth without using extra cement complete all as specified and as directed. |
| 13 | Dismantling, floor, hearth or wall tiling including cement mortar bedding complete and removing rubbish off from the premires complete all as specified and directed. |
| 14 | M&L for Coloured Non - skid Ceramic tiles 7 to 8 mm thickarea of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bedding in cement mortar (1:6) complete all as specified and as directed. |
| 15 | All as per items No 13 but on vertical surfaces over and including 15 mm thick rendering in CM 1:4 |
| 16 | M&L for Coloured Glazed ceramic tiles in vertical surface 450mm X 300mm X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick plaster in cement mortar (1:4) complete all as specified and directed. |
| 17 | M&L for Heavy duty coloured paving/parking tiles of size 300X300x8 to 9 mm thick, in external floors/Parking etc, set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 15 mm thick screed bed or bedding layer in cm (1:6) and 25 mm thick pcc 1:2:4 as in levelling course complete all as specified and directed. |
| 18 | Taking down chowkhat or frame with shutter (without taking off shutter from the frame) Area exc 1.5 Sqm but n exc 4.00 Sqm each complete all as specified & directed |
| 19 | S&F 125x60mm sizepressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges lock strike plate etc complete all as specified and directed. |
| 20 | M&L for PCC 1:3:6, type C-0 (using 12.5mm graded stone aggregate) as infilling in door frames complete all as specified and directed. |
| 21 | S&F 32 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed |
| 22 | M&L for 2nd class HW Small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary\" labours; articles n exc 200 cu. cm each complete all as specified and directed |
| 23 | S&F 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed |
| 24 | S&F 200mm(bolt length) Aluminium anodised, barrel tower bolts of extruded sectioncomplete all as specified and directed. |
| 25 | S&F 150mm Aluminium handles, cast type, anodised of pattern/design as approved by GE/sample kept in GE\"s office complete all as specified and directed. |
| 26 | S&F 35mm thick, 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. , fitted with cut and mitred beads for securing glass, etc., sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), complete all as specified and directed. |
| 27 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified & directed. |
| 28 | S&F mild steel 300mm, ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified & directed. |
| 29 | M&L for Mild steel framed work such as grills, grataings, ladder, railing and similar work etc with ends of bars shouldered and/or riveted or forged into spikes conforming to Fe 290 Gde-E-165 complete all as specified and directed. |
| 30 | M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel /iron surfaces of any description, over 10cm in width or girth, not otherwise described including preparation of surface complete all as specified and directed. |
| 31 | M&L for applying two coats of synthetic enamel paint over a coat of pinkprimer on new wooden surfaces of any description, over 10cm in width or girth, not otherwise described including preparation of surface complete all as specified and directed. |
| 32 | Taking down chowkhat or frame with shutter (without taking off shutter from the frame) Area not exc 1.5 Sqm each complete all as specified & directed |
| 33 | M&L for Powder coated Anodised aluminium frame for doors/windows/ventilators with one or more rebates including joining cleat for fixing complete all as specified and directed. Note:- Thickness of powder coating shall not be less than 50 micron. |
| 34 | M&L for Powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, powder coated aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.NOTE: Thickness of powder coating shall not be less than 50 micron. |
| 35 | M&L for Anodised aluminium door shutters, aluminium section, powder coated, weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.NOTE: Thickness of powder coating shall not be less than 50 micron. |
| 36 | S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed. |
| 37 | S&Ffor 5.5 mm thick plain sheet glass ordinary quality(area of each pane notexc 0.5 Sqm ) and glazing with oil puttycomplete all as specified and directed. |
| 38 | All as peritem No. 36 above but aera of each pane exc 0.5 Sqm |
| 39 | S&F 75mm(bolt length) Aluminium anodised, barrel tower bolts of extruded sectioncomplete all as specified and directed. |
| 40 | S&F 140mm Floor door stopper of brass body and tongue, with hard drawn steel spring complete all as specified and directed. |
| 41 | M&L for 75 mm thick plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in floor sub base, finished surface even and rough to receive the toping layer complete all as specified and directed. |
| 42 | M&L for Sand filling under floorsor in foundation includingwatering and consolidationcomplete all as specified and directed. |
| 43 | M&L for Machine pressed precast concrete rubberised interlocking paver block coloured, any shape and size,confirming to IS 15658-2006 of 80mm thickness, M-40 Grade, fixed withgrey cement and no pigments complete all as specified and directed. |
| 44 | M&L for PCC 1:2:4, type B-1 (using 20mm graded stone aggregate) as in kerb, bed block coping, path etc complete all as specified and directed. |
| 45 | S&F in repair 202 grade stainless steel drapery rod 25 mm dia with fixing brackets and fancy type finials /Lattos, complete all as specified & directedNote : Brackets and finials/latto shall strictly as per sample kept in GE\"s office or asapproved by GE. |
| 46 | M&L for SMART PAINTING on old decorative wall surfaces by mechenical meanswith complete removal of existing treatment, application of cement based putty @ 1Kg/Sqm, water based exterior grade primer @ 0.9Ltrs/XSqm and primium quality oil bound distemper @ 1.79 Ltrs/ XSqm complete all as specified and directed.NOTES:-(i) Application of putty, primer and paint shall be exicuted usining airless spray mechine of appropriate capicity in one or more coats as reqired to apply specified quantity of putty, primer and paint up to the entire setisfection of Engg-in-charge.(ii) Complete removal of existing treatment from decorative walls and grinding of puttied surface shall also be done by mechenical means using mechanical sander having mechanical vacuum mechanism with sanding pad of appropriate grit so asto make surface clean, free from dust, loose paint etc up to the entire setisfection of Engg-in-charge.(iii) The paint/ distemper used shall have silicon additive & Color stay Technology, Excellent Dirt Pick up resistance, anti algal properties and low VOC (less than 50 gram/ litre) as per the LEEDS specifications, |
| 47 | Contd/...(iv)The smart periodical servicesshall be got executed through authorized applicator of manufacturer whom painting materials is proposed to use. The approval of GEin writing for name of applicator and MOU with him is mandatory requirement before execution of work. (v) Min6-8 hrs shall be allow to dry the surface before subsequent coat/application (vi) Mixing of water in putty or dilution of primer/ paint (if required) shall be homogenious and preferable with mechenical mixer of appropriate capicity.(vii) Contractor shall submitte Purchase vouchers for full quantity of putty, primer and paint/distemper etc and Engg-in-charge shall defaced the same and enter/record in MB. No material brought at site shall be allowed to incorporate in the work without approval of GE in writing.The engineer -in-charge shall maintaina record in Pakka bound register to record the approval of material brought by contractor. The production ofcopy of purchage vouchers (duly defaced), sample approval and material approvalare mandatory requirement for release of payment. |
| 48 | All as per item No. 45 Above but using water based premium acrylic smooth exterior emulsion. |
| 49 | M&L for rendering 10mm thick on brick work or concrete surfaces in CM (1:6) including making surface fair and even complete all as specified and as directed. |
| 50 | M&L for rendering 15 mm thick on brick work or concrete surfaces in CM 1:4, mixed with liquid water proofing compound @ 200ml/50Kg cementincluding making surface fair and even complete all as specified and as directed.NOTE: Liquid water proofing compound shall be measured and paid separately under respective item here-in-under. |
| 51 | Supply only liquid water proofing compound complete. |
| 52 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed. |
| 53 | M&L for machine cut kota stone slab (area not less than 0.30 Sqm and width not less than 0.50m each slab) in flooring, 18- 20mm thick laid over and including 20mm screed bedding in cement mortar (1:6), jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed. |
| 54 | M&L for Kota stone slab (area not less than 0.30 Sqm and width not less than 0.50m each slab), 18- 20mm thickin riser of steps, skirting, dado and pillar laid over and incl 10mm thick plaster in cement mortar (1:3), jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed. |
| 55 | S&F in repair kitchen or laboratory sinksmade of 1 mm thick stainless steel sheet, with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 56 | Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level ) complete all as specified and as directed. |
| 57 | M&L for Use and waste form work in flat surfacesto soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)complete all as specified and directed. |
| 58 | M&L for reinforced cement concrete1:2 : 4, type B-1 (using20 mm gradedcrushedstoneaggregate)as in slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelvescomplete all as specified and directed. |
| 59 | M&L for 20 mm granite slab work (in single full length) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in 20 mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. |
| 60 | M&L for Rounding to edges of stone slabs one edge/half rounded, such as in steps, cooking platform, and other similar situations complete all as specified and as directed. |
| 61 | M&Lmild steel TMT bars10 mm dia & overcut to lengthbent to shaperequiredincluding cranking bending, spirallyfor hooking for columns hooking and bindingwith including mild steel annealed wire not less than 0.9 mmdia securing with clips complete all as specified and directed. |
| 62 | S&F in repairs15mm bore CP brass bib cock, long body, screwed for iron pipe or ferrule and fixed complete all as specified and directed Jaquar CONTINENTAL SERIES. or equivalent |
| 63 | S&F 32mm dia Low density polyethylene pipes (LDPE), of pressure rating 6, kgf/cm2 fixed, complete to walls, ceilings or in floors, etc. complete all as specified and directed. |
| 64 | M&L plain cement concrete 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in foundations, filling and mass concrete including sub base of under floors complete all as specified and directed. |
| 65 | M&L for brick work with fly ashold size bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and directed. |
| 66 | M&L for Brick wrok with old size Fly ash bricks, straight or curved on plan to any radius,in half brick thick wall built in cement mortar 1:4 complete all as specified and as directed. |
| 67 | Returning, filling in excavated approved soil, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm each complete all as specified and directed. |
| 68 | Removing of surplus excavated soil to a distance not exceeding 50 mtr and deposited where directed at a level not exceeding 1.5 m above the starting point in soil complete as directed. |
| 69 | M&L for hard core broken stone of gauge not exceeding 63 mm, deposited spread and levelled in layers not exceeding 15 cm thick, levelling and rammed to a true surface complete all as specified & directed. |
| 70 | M&L for 25mm thickPCC 1:2:4 Type B-1 (using 40 mm graded crushed stone aggregate) as in leveling courcescomplete all as specified and directed. |
| 71 | M&L for Coloured Non - skid Ceramic tiles 7 to 8 mm thickarea of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bedding in cement mortar (1:6) complete all as specified and as directed. |
| 72 | M&L for Use and waste form work in flat surfaces to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams,complete all as specified and directed. |
| 73 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed.NOTE :(i) The WPC shall comprising of virgin PVC polymer of K value 58-60 Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms). (ii) The frame shall fabricated with mitre joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws.(iii) The WPC shall have minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant.(iv) The cost of M.S. hold fast/ lugs or SS dash fasteners shall deemed included in quoted unit rate. Each frame shall be fixed with min 06x holdfasts/ faster\"s. |
| 74 | S&F Factory Made Solid panel PVC Moulded Door Shutters 28 to 30 mm thick (stile:), with particle board core and 2,4 or 6 raised panel design with2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face complete all as specified and directed. |
| 75 | S&F 100 mm long butt hinges, medium weight, cold rolled mild steel, complete all as specified and directed. |
| 76 | S&Ffactory made uPVC white colour casement (Openable) window made of extruded profiles with wall thickness of 2.3mm (+ – 0.2mm). Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges of\"zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 5mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories complete all as specified and directed. |
| 77 | M&L for 4.8 mm thick frosted sheet glass ordinary quality (area of each pane notexc 0.5 Sqm ) and glazing with beading complete all as specified and directed. |
| 78 | M&L 5mm thick plastering on ceiling in CM (1:3) surface finished, even and fair without using extra cement including three coat of white wash complete all as specified and directed. |
| 79 | M&L for applying two coats of white wash including preparation of newly plastered surfaces of ceiling complete all as specified and as directed. |
| 80 | M&L for applying two coats of oil bound distemper paint over 1mm thick putty and one coat of primer including preparation of newly plastered surfaces of wall complete all as specified and directed. |
| 81 | M&L for applying two coats of cement base paint over one coat of alkali resistent primer including preparation of newly plastered surfaces of wall complete all as specified and as directed. |
| 82 | M&L for Cutting chases pinning in, making good to facing where reqd. and pointing in CM 1:3 to ends or edges of landing , steps, cills, sunshades, selfs lintels etc. and cutting chases for conceled for water tubing or conceled condute wiring etc and making good, cutting n.exc 10cm girth.complete all as specified & as directed |
| 83 | S&F PP-R pipe of dia 15 mm with PN 16 with all fittings fixed to walls and ceilings or laid in floor complete all as specified & directed |
| 84 | S&F PP-R pipe of dia 15 mm with PN 16 with all fittings and fixed complete to walls/ ceiling or laid in floors complete all as specified and directed. |
| 85 | S&F in repairrotational moulded HDPE water storage tanks (cylindrical vertical with closed top) of 1000 litres capacity, ISI marked, double layered hoisted and fixed in position including connecting up pipes includingball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed for 20 mm bore size (minimum weight 210gms) complete all as specified and directed. |
| 86 | S&F in repair 20 mm dia Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipes and fixed complete all as specified and directed |
| 87 | S&FVitreous china wash down water closet European type pedestral pattern (P or S trap) white, including white 10 ltrs PVC valveless syphonic action type low level flushing cistern with inlet ball valve/ float and handle, brackets, 32mm dia PVCflush pipe, closed pattern plastic water closet seat cover with recessed bottom and mild steel chromium plated or aluminium hanging device, complete all as specified and as directed. |
| 88 | S&Fbrass chromium plated 2 way bib cock with wall flange 15 mm dia including fixing to pipe complete all as specified and directedMake :Jaquar CONTINENTAL SERIES. or equivalent |
| 89 | S&F health foucetwith 1200mm longflexiblemild steel tube80mm dia with wall hook complete all as specified and as directed.Make :Jaquar ALLIED SERIES. or equivalent |
| 90 | S&FVitreous china squatting pan ‘Orissa’ pattern of size 580 x 440 mm, White, with integral foot rests including provision of cement concrete bedding complete all as specified and directed. |
| 91 | S&FPVC valve less, symphonic action type, flushing cistern 10 litres capacity, low level, white, with inlet ball valve float handle along with suitable flush pipe/bend including brackets, complete all as specified & directed. |
| 92 | S&F 15 mm size angular cock, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed both end for iron pipes complete all as specified and directed. |
| 93 | S&FPVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and directed |
| 94 | S&F vitreous china wash hand basin (WHB), white, flat back of size 550 x 400 mm excluding taps, waste chain and plug but including bracket, waste coupling of 32 mm size complete all as specified and directed. |
| 95 | S&F15mm bore fancy type pillar tap cast copper alloy with capstan head chromium plated screwed down high pressure with or without lettered \"hot\" or \"Cold\" with long screwed shanks and fly nuts fixed to pipe complete all as specified and directed. |
| 96 | S&F75mm PVC (SWR)floor trap, plain with grating including jointing with solvent complete all as specified and as directed. |
| 97 | S&F150mmx 100mm Salt-glazed stoneware gully traps, square or round mouthed, type \"P\" or \"S\" and setting and jointing in cement mortar 1:1complete all as specified and directed. |
| 98 | S&F looking mirror of size 600 x 450 mm, selected quality5 mm thick including aluminium frame, mounted on 6 mm thick commercial plywood and fixed to wall with wooden plug & chromium plated brass screws complete all as specified and as directed. |
| 99 | S&FSheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.Make Jaquar CONTINENTAL SERIES. or equivalent |
| 100 | S&FShower rose (65 mm dia)round shape single flow, ABS body, CP with grey face plate) with shower arm (240mm long),for wallmounted showers with stainless steel flange, complete all as specified and directed.Make : Essco (Jaquare) catPart No.EOS-CHR-538RB for Shower and Cat Part No. ALE-536A -for Arm or equivalent in make as specified in Appendix \"D\" |
| 101 | S&F in repair 15 mm bore stop valve, concealed type (bothexposed& concealed part ) with adjestable flange and regular body concealed part , fancy type chromium plated withscrewed down, high pressure,screwed both ends for iron pipe or for unions and fixed complete all as specified and directed Jaquar CONTINENTAL SERIES for Exposed part kitcompatable with and including ALD- 083 FT concealed part or equivalent |
| 102 | S&F brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges including brackets fixed to wall complete all as specified and directed |
| 103 | S&F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenchescomplete all as specified and as directed. |
| 104 | S&F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wallcomplete all as specified and as directed. |
| 105 | S&F 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches complete all as specified and as directed. |
| 106 | S&F 110 mm PVC (SWR) bend any radius complete all as specified and directed. |
| 107 | S&F 75 mm PVC (SWR) bend any radius complete all as specified and directed. |
| 108 | S&F 110mm PVC (SWR) junction single, (Single T) equal or unequal with acess door complete all as specified and directed. |
| 109 | S&F 75 mm PVC (SWR) junction single, (Single T) equal or unequal with acess door complete all as specified and directed. |
| 110 | S&F 110mm PVC (SWR) vent cowl complete all as specified and directed. |
| 111 | Supply and laying, jointing and testing in trenches DWCPE SN 8) nominal size 163 (ID)/180 (OD) dia as per IS-16098 (Part-2): 2013 upto a depth of 1.65 m with and including all items and activities required to make sewer line functional complete all as specified and as directed. |
| 112 | M&L for providing precast reinforced cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) in cover slabs (for manholes etc), shelves and similar articles with plain faces including necessary moulds and setting in cement mortar 1:4 complete all as specified and as directed.NOTE: reinforcement to be measured and paid separately under respective item here-in-after. |
| 113 | M&Lmild steel TMT bars 6 to 8 mm diacut to lengthbent to shaperequiredincluding cranking bending, spirallyfor hooking for columns hooking and bindingwith including mild steel annealed wire not less than 0.9 mmdia securing with clips complete all as specified and directed. |
| 114 | Vitreous China urinals, Half stall type (back or corner wall type),complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe but including wase coupling complete all as specified and directed. |
| 115 | M&L for 20 mm granite slab work (in single full length) work (table rubbed and polished) as in wall lining, urinal partitions etc and like in 12 mm thick cement mortar (1:3) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. |
| 116 | Cutting in to existing manhole for connecting new drains and making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B-1 smooth finish and reforming benching for 150 mm dia pipe complete all as specified and as directed by Engr-in-Charge. |
| 117 | S&F20 mm dia Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipes and fixed complete all as specified and directed |
| 118 | S&F20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight2 0 m m - 2 1 0 g m s ) complete all as specified & directed |
| 119 | S&F PP-R pipe of dia 25 mm with PN 16 with all fittingslaid in trenches complete all as specified & directed |
| 120 | S&F PP-R pipe of dia 20 mm with PN 16 with all fittingslaid in trenches complete all as specified & directed |
| 121 | Taking down carefully copper/aluminum point wiring (light/fan/socket power) complete, including fixture and fitting such as switches, ceilling roses, pendants, regulators, socket, light fittings etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per condition seperately) and making good disturbed surfaces of walls, floors, etc. |
| 122 | M&L for concealed point wiring for one light/fan/bell point controlled with one oneway switch with PVC insulated FRLSH unsheathed single core cable of multistranded copper conductor of size 1.5 sqmm as phase & neutral drawn in and including suitable size (not less than 20 mm dia)PVC conduit, medium grade , ISI marked,with all fitting and accessories including1.5 sqmm stranded PVC insulated FRLS unsheathed copper conductor(Green in color) as earth wire connected to common earth dolly ,CI/pressed steel terminal switch boxand 3mm thick white bakelite plastic laminated top sheet coverfixed with brass screws cup washer, making goodto surface with CM(1:4) plaster and paint to matchthe surface complete complete all as specified and directed. |
| 123 | All as per item No 120 above but for Onesocket outlet on independent boardwith cables of size 2.5 sqmm |
| 124 | All as per item No. 120 above but forsocket outlet on same board with other points using cables of size 1.5 sqmm |
| 125 | S&F switch piano flush button single pole one way 5 Amp complete all as specified and directed. |
| 126 | S&F socket outletflush type 3/5 pin 5/6 Amps 230V AC complete all as specified and directed. |
| 127 | S&F switch piano flush single pole one way 15/16 Amps complete all as specified and directed. |
| 128 | S&F socket outletflush type 5/6 pin15 Amps 230V AC complete all as specified and directed. |
| 129 | S&F ceiling rose 3 terminal / PVC/ polycarbonate, isolated body complete all as specified and directed. |
| 130 | S&F stepped type electronic fan regulator flush type complete all as specified and directed. |
| 131 | S&F Lamp holder PVC/Polycarbonate type with back plateincluding 10 watt LED bulb/lamp complete all as specified and directed |
| 132 | S&FTPN DB double door 4 way 415V incl busbar and other accessories without MCCB complete all as specified and directed. |
| 133 | S&F MCB TPN, 415Volt, 100Amp, 10KA \"C\" series complete all as specified and directed. |
| 134 | S&F Distribution board (DB),SPN , 8 way SPN with 200 amps 240 volts rated copper busbarfor MCBs in sheet steel enclosure double door typecomplete all as specified and directed. |
| 135 | S&F MCB , SP, AC, 240 volts, 06 to 32Amps, 10KA, \"C\" series and making connections with suitable size of copper lugs complete all as specified & directed. |
| 136 | S&F MCB, SPN, AC, 240 volts, 40 Amps,10KA, \"B\" series and making connections with suitable size of copper lugs complete all as specified & directed. |
| 137 | M&L forsub main wiring with two single core PVC insulated FRLSH unsheathed, multistranded copper conductor cable 2.5 Sqmm with one single core 2.5 Sqmm PVC insulated FRLSH unsheathed, stranded copper conductor cable as earth wire in and including PVC conduit medium grade of suitable size, ISI marked, duly concealed to wall/floor or above false ceiling of suitable size with all fitting and accessories laid on wall/ceiling and earth wire connected to common earth pointincluding disconnection and taking out old unserviceable submian wiring complete all as specified & directed.Note:- Two run of 2.5sqmm single core cable as phase and neutral, one run of 4 sqmm single core cable as earth(green in color) and one run of PVC rigid conduit will be considered as one RM |
| 138 | All as per item No 135 above but with 6 Sqmm cable |
| 139 | S&F LED tubelight fitting 1x 20W, 220V, AC with driver, holder, aluminium housing connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified & directed. |
| 140 | S&F LED bldg security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified & directed. |
| 141 | S&F Five star rated with brushless direct current motor (BLDC) ceiling fans with blades, down rod, and other accessories, 230 V, 1200 mm sweep, min air delivery 210 CFM with service value 6.00 BEE complete all as specified & directed. |
| 142 | M&L for earthing complete with galvanished steel earth plate electrode 600x600x6.0 mm thick buried directly in ground and earth pit not less than 2.25 mtr deep below NGL and top edge of the plate not less than 1.5 Mtr deep below NGL, surrounded with adequate qty of char coal dust mixed with salt to a packed thickness not less than 15 Cm on all sides of earth plate inclearth work,4mm dia GI wire , nut bolts etc to connect with earth plate one end connected to continuous earth wire incl GI pipe watering light grade with CI funnel and wire mesh and PCC 1:2:4 type B-1 as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1 duly reinforced with MS bar 6mm dia @ 150mm C/C both ways with 10mm dia MS bar lifting handles, all as described in electric plate No. 3 of SSR part-I complete all as specified and directed. |
| 143 | S&F in repair35 sqmm 3.5 core electric power cables (heavy duty),XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured,with alumimnium conductor, 1100 volts, grade complete all as specified and directed. |
| 144 | Excavation in trenches, not exceeding1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes,laying of cables etc. not exceeding 10 sq m on plan and not exceeding 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed. |
| 145 | M&L for laying Sand cushioning with dry local sand for cable protecting under ground cable (8 cm before laying the cable and 15 cm after laying the cable) in trenches including punning the sand upto 18 cm thick and consolidated complete all as specified and directed.NOTE :Punned thickness only shall be measured. |
| 146 | Supply and laying dry well burnt locally available brick sub class \"B\" modular bricks laid flat with width equal to the length of whole bricks over cable as cable protection complete all as spcified and directed. |
| 147 | S&F 50 mm dia Galvanised steel tubing light grade with all necessary fittings laid in trenches, fixed to walls, poles, under road/ floor etc for cable protection, complete all as specified and directed. |
| 148 | S&F post top lantern LED type, 20watt, 230 volts AC, outdoor type with decorative post top for 360 degree indirect light, IP 65 protection with impect and corrosion resistent with driver complete all as specified and directed. |
| 149 | S&F 300m sweep exhaust fan, steel body AC single Phase. 230V with blades, frame and louvers complete all as specified & directed. |
| 150 | S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified & directed. |
| 151 | S&F Distribution board (DB),SPN , 4 way SPN with 200 amps 240 volts rated copper busbarfor MCBs in sheet steel enclosure double door typecomplete all as specified and directed. |
| 152 | S&F in repair16 sqmm 2 core electric power cables (heavy duty),XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured,with alumimnium conductor, 1100 volts, grade complete all as specified and directed. |
| 153 | S&F single pole and neutral (SPN) enclosure withtwo pin earth plug and socketincluding one single pole MCB 20A for AC points complete all as specified & directed. |
| 154 | Supply and install split type AC of capacity, electric driven,2.0 ton capicity, convertible type , indoor/outdoor complete with cordless remote control unit, 5 star rated, copper condensor, dual invertor including stand for installation complete all as specified and directed. |
| 155 | Supply and fix automatic Voltage stablizersingle phase aircooled indoor type & designed for input variation Voltage stablized at 230 V with aacuracy of + 2.5% of capacity 5 KVA complete all as specified and directed. |
