|
| 1 | Excavation in foundation in ordinary soil ( Loam clay or sand) including lift up to 1.5 meter (5ft) and lead upto 30m (100ft) and including filling,watering & ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as direction by the Engineer-in-charge upto a distance of 30m(100ft) from the foundation trenches. SI No. 253 |
| 2 | Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavatorat OMC, and compacting with smoothwheelroller to achieve thedesired density complete as per technical specification clause 401. |
| 3 | Cement concrete with 4cm (1/2\"\") gauge approved stone ballast, approved coarse sand. cement in the proportion 8:4:1 including supply of all materials,labour and tools and plants etc. required for proper completion of the work. SI No. 281 |
| 4 | Providing and laying of Rubble moulded Zig-Zag Interlocking concrete block pavements having thickness 80mm as per drawings and Technical specification clause 1504 |
| 5 | Dismantling cement concrete or brick or granolithic floors including base concrete and including stacking of dismantled materials as directed by the Engineer-in-charge within a distance of 60metres. SI No 697 |
| 6 | Murga Jali ½ x 24 gauge |
| 7 | Cement concrete with 4cm (1/2\"\") gauge approved stone ballast, approved coarse sand. cement in the proportion 4:2:1 including supply of all materials,labour and tools and plants etc. required for proper completion of the work. SI No. 279 |
| 8 | Dismantling cement concrete or brick or granolithic floors including base concrete and including stacking of dismantled materials as directed by the Engineer-in-charge within a distance of 60metres. SI No 697 |
| 9 | 12mm thick plaster on brick work minimum thickness not less than 10mm with 1part of cement and 2 part of find sand of 1.25 fineness modulus. SI No 584 |
| 10 | Providng and laying of 8 to 10mm thick ivory or light shade vitrified tiles of 600mm x 600mm size in flooring or skirting laid with 1 : 3 cement mortar (1 cement , 3 coarse sand) finishing with cement sturry & with pigment grouting & Polishing complete I/C S/O all material labour T & P etc. required for proper completion of work excluding base contrete. |
| 11 | Mild steel or iron work of small sizes and sections such as holding down bolts, hold fasts, tierods, gratings, etc. (when not included in over all rates) wrought to required from excluding supply of steel bolts, nuts wastage etc and including their fixing required for proper completion of the work. SI No 502 |
| 12 | Providing and fixing 1mm thick M.S. sheet sliding shutters with frame and diagonal braces of 40x40x6mm. (1½x1½ - 1/4\") angle iron 3.15 mm 1/8\") gusset plates at the junction and corners, hooks at top 25 mm (1\") dia, pullyes at bottom40x40x6mm (1½\"x1½\"x1/4\") and angles and T iron guides at top and bottom respectively including locking arrangement with handles etc. complete and applying one priming coat of approved lead paint. SI No 519 |
| 13 | Painting or Vernishing new iron work in small areas or new wood work with one coat (up to one Sq. meter) of ready mixed priming paint and two coat of approved superior quality ready mixed paint or varnish including supply of all materials labour and tools and plants etc. required for proper completion of the work. Paint to be used should confirm the ISI no. 103-1950. SI 641 |
| 14 | Supply and fixing of Brass Bib Cock |
| 15 | Supply and fixing of Stop Cock |
| 16 | Supply and fixing Low |
| 17 | Supply and fixing 20mm GI Pipe |
| 18 | Excavation in foundation in ordinary soil ( Loam clay or sand) including lift up to 1.5 meter (5ft) and lead upto 30m (100ft) and including filling,watering & ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as direction by the Engineer-in-charge upto a distance of 30m(100ft) from the foundation trenches. SI No. 253 |
| 19 | Sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8km (5 miles) from the side of work & including watering ,dressing etc. Rate to include cost of all materials,labour and tools & plants,etc. required for proper completion of the work. SI No 255 |
| 20 | Providing and laying O.B.B. |
| 21 | Class-150 brick work in 1:6 cement and fine sand of 1.25 fineness modulus mortar in foundation and plinth including supply of all materials, labour and tools and plants etc. Required for proper completion of the work. SI No. 305 |
| 22 | 12mm thick plaster on brick work minimum thickness not less than 10mm with 1part of cement and 2 part of find sand of 1.25 fineness modulus. SI No 584 |
| 23 | RCC work with cementapproved coarse sand and 2cm. (3/4\"\") gauge approved stone ballast in the proportion 1:2:4 in lintels of doors and windows, excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B.W.G.I wire.and including necessary cantering and suttering etc and also including supply of all materials,labour and tools and plants etc. required for proper completion of the work. binding wire to be supplied by the contractor free of cost. SI No 284 |
| 24 | Mild steel of iron in plain work such as reinforced concrete/ brick work (when not included in over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel, its wastage and hooks and authorised over lapping shall be measured. SI No 504 |
| 25 | Dismantlingbrick work or stone work in lime or cement mortar and including stacking of materials as directed by the Engineer-in-charge within a distance of 60metres. SI No 692 |
| 26 | Cement concrete with 4cm (1/2\"\") gauge approved stone ballast, approved coarse sand. cement in the proportion 4:2:1 including supply of all materials,labour and tools and plants etc. required for proper completion of the work. SI No. 279 |
| 27 | Supply and fixing 6mm (1/4\") China white glazed tiles in flooring or in skirting or dado laid with ratio 1:3 cement and approved coarse sand finished with white cement slurry, jointing and polishing complete, including supply of all material, labour and tool and plants etc. required for proper cpmpletion of the work.SI No 629 |
| 28 | Supply of Approved M.S. Z-section windows and ventilators excluding cost of glass panes but including supply of all material its fabrication nuts and bolt, hole fast for proper completion of work as per direction of engineer-in-charge and also including cost of handle stays rod etc. and one coat of red oxide paint complete in the respect site of work |
| 29 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.SI No13.8 |
| 30 | One priming coat and two coat oil distemper on new work including supply of all materials, labour and T&P etc. required for proper completion.of work. SI No 649 |
| 31 | Supply and fixing of 40mm (1½\") thickcommercial quality Sitapur ply or other approved plywood flush shuttersincluding stops and including fixing and adjustment of hinges, bolts, locks handles springs and/or other fittings but excluding their supply and including painting with two coats of black japan on all Iron fittings if necessary and including fixing the glass panes with putty and brad glass to be 4mm thick fitting with necessary screw to be supplied depertmentally. SI No 470a |
| 32 | 18% GST |
