Tender For Repair Work In Shahjahanpur Community Building Of Bida - 1 Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead With cement mortar 1 :4 ( 1 cement : 4 coarse sand) 2 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding: 3 Two or more coats on new work including prepartion of base with primer, putty, lippy etc complete in all respect. 4 Old work (One or more coats ) 5 Finishing walls with Acrylic Smooth exterior paint of required shade including all scaffolding. New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). 6 Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in :Cement mortar 1 : 4 (1 cement : 4 coarse sand) 7 Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece M.S. With stainless steel cover plate 8 Filling the gap upto 5 mm depth and 5 mm width in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. 9 S&f fixed wire gauge of stainless steel of 14 mesh x 24 gauge to the aluminium window by Aluminium beading 20x3mm with suitable screws not exceeding 150mm distance at all heights with all lead and lift with scafolding. 10 Providing and fixing to existing door frames 24mm thick factory made PVC door shutters made of stiles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2mm +/- 0.2 mm with inbuilt edging on both sides.The stiles and rails mitred and joined at the corners by means of M.S.galvanized/plastic brackets of size 75x220mm having wall thickness 1.0mm+/- 0.1mm and stainless steel screws. The stiles of the shutter reinforced by inserting galvanized M.S.tube of size 20x20mm and 1mm +/-0.1mm wall thickness. The lock rail made up of ‘H’ section,a uPVC hollow section of size 100x24mm and 2mm +/- 0.2mm wall thickness fixed to the shutter stiles by means ofplastic/ galvanized M.S.’U’ cleats.The shutter framefitted with a uPVC multi-shambered single panel of size not less than 610mm, having overall thickness of 20mm and 1mm +/- 0.1mm wall thickness. The panels fitted vertically and tie bar at two places by inserting horizontally 6mm galvanized M.S.rod and fastened with nuts and washers, complete as per manufacturer’s specification and direction of Engineer-in-charge (For W.C.and bathroom door shutter). 11 P & F 1st quality Heavy Duty Vitrified Double Charged tiles on floor, skirting and steps etc.in different sizes (thickness minimum 10mm) with water absortion less than or equal 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1: 4 including grounting the joints with white cement and matching pigment etc complete.size600 mm X 600mm 12 Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS : 13753 & IS :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). 13 Stone work (machine cut edges) for Wall cladding/ Veneering work up to 10 m heightwith 20 to 30 mm thick Pink Sand stone (Bansi Paharpur) and backing filled with a grout of 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing by means of cramps which shall be paid separately).Exposed face Machine cut 14 Labour charges for repair to door / window without using any material such as applying randha (finishing) tightening of bolts & screw etc. 15 Repairofdoor,windowshuttersincludingcostofmaterialandlabourforchangeofdamaged : 16 Panel by Shuttering Ply - 9mm thick (Commercial) 17 Aldrop of mild Steel 8 long x 10mm dia 18 Stopper of Aluminium with Double Rubber Gutka 19 Steel Hinges For Wooden Chowkhat 3 size. 20 Mild Steel Tower Bolt 6 long 21 Steel Handle 6 size 22 Add extra for mirror polishing on existing marble work/ Kota stone flooring work where ever required to give high gloss finish complete. 23 P & F European type white glazed vitreous china 1st quality W.C pan (IS : 2556 Mark) with P or S trap including cutting and making good the wall and floor 24 Labour charges for removing W.C. pan (any type) of all sizes with care including all necessary fittings P or S trap. 25 P & F Low level Flushing Cistern of 10 litres capacity (IS : 2556 mark) of approved make with complete fittings C.I. brackets duly painted, brass ball cock with ball (IS: 1703 mark) complete including cutting and making good the wall: PVC withPVCbend and superior internal fittings as per IS : 7231 . 26 Removing and re-fixing of wash hand basin including all necessary fittings. 27 P & F Kitchen & Lab. Sink of approved make with C.I. brackets duly painted, 40 mm C.P. waste coupling, C.P. Brass chain with rubber plug, 40 mm G.I. waste pipe up-to floor level complete including cutting and making good the wall & floor : Fire clay glazed kitchen sink (I.S 771-1985Marked) size 600 x 450 x 250mm. 28 P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make, P.V.C Waste pipe with PVC nut 32 mm complete including cutting & making good the wall : Size 610 mm x 510 mm 29 P& F waste Pipe with all fittingP.V.C with C.Pnut 32 mm 30 P & F Looking Mirrors with P.V.C. frame of approved make as per direction of Engineer-in-charge .Size 500x400mm 31 P & F Premiumquality water closet Seat Covers with brass hinges complete Solid PVC (ISI marked) grade-I White for EWC. 32 P & F Jet spray for water closet with C.P. Copper Tube flange of approved make. 33 P & F Toilet Shelf of approved quality/make: W.V.C. (I.S.: 2556 Mark) Size 300mm 34 P & F Towel Rail or Ring of approved quality/make: C.P. brass Towel Rail elbow type with concealed screws size 450mm (Heavy duty). 35 P & F Grating of approved quality/make: Stainless Steel Sheet size 125mm dia. 36 P & F Tooth Paste & Brush Holder of approved quality/make: Stainless Steel 37 P & F Soap Dish or Tray of approved quality/make C.P. brass heavy and superior quality. 38 P & F Bath Shower of approved quality/make. C.P. brass of Heavy & superior quality 150mm. 39 P & F PVC Storage Tank ISI Marked (IS : 12701) indicating theBIS license No),of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 1000 (-do-) 40 P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make: P.V.C.heavy duty, 15mm nominal bore. 41 Painting with synthetic enamel paint of approved brand and manufacture togive an even shade : One or more coats on old work. 42 Providing& Fixingof ISO Certified company made BEEStarratedcopperwoundeddoubleballbearing capacitor start, aluminium body & Metallicblade ceilingfanas per PWD specification for electrical Works, conforming to IS:374-2019, & IS:1885 -P-V- 1981.withdownrodupto30cmwithsecondary support safety cable ( steel wire ) , cotter pin with 3 x1.5 sq.mm pvc insulated flexible copper conductor makingconnectiontestingetc.asrequired. Appropriate OEM test certificate shall be submitted by contractor.AllasperpreapprovedbyEngineerin charge. Foradditionaltechnicalparametersof products/work ,referAnnexureAattachedwith this BSR . 1200mmSweepBEE3Starrated (servicevalue >=5.0to< 5.5 ) 43 Providing&Fixingoftwopinenergyefficientcompactfluorscent lamp in existing holder/fixture as required complete in all respect. AllasperpreapprovedbyEngineerincharge. Foradditional technicalparametersofproducts/work ,referAnnexure attached with this BSR . 13/18 watt 44 Providing & Fixing of IP 20 boxmade outfrom 1.2mm thick CRCA sheetsteelwithdepthofminimun30mmandfinishedwith powder coating andsuitable for mounting LED tubeincludingside covers,holders,internalwlluirminingateoi thesinglesided connection LED tube. ( Without tube).All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . Suitable for 4 LED Tube shape fixture 1 X 18/20 W 45 Providing & Fixing ofof ventilating fans Capacitor start, copperwounded,singlephasewithPVCimpeller,ABS body,automaticopenablelouvershutterinexisting openingincludingmakingconnection,testingetc.as required. OEM shall be an ISO certified company. Appropriate OEM test certificate shall be submitted by contractor.AllasperpreapprovedbyEngineerin charge. Foradditionaltechnicalparametersof products/work ,referAnnexureAattachedwith this BSR . 200 mm sweep 46 Wiringoftwincontrollight/fan/callbellpointasperPWDspecificationforelectricalWorkswithISImarked1.5sq.mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade (IS:694)and1.5 sq.mmnominalsize FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694)in recessed ISI markedMMS ( IS:9537 P - III ) vergin material PVC conduit & its all accessories( J.B. , Bends etc.) , round tiles,2nos.18SWGG.I.boxwithearthterminal, 2Nos6Atwo wayswitch,3pinceilingrose/Lampholder/3pointConnector,3.0mmthickISImarkedphenoliclaminatedsheet(IS:2036- 1995),Al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by Engineer in charge, making connections,testingetc.completeasrequired. Forspecification ofcopper Conductor, PhenolicLaminatedsheets&Electrical/ Wiringaccessories referChapterE-04,E-05&E-07..For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 47 Providing & Fixing ofISI Certified company made ISI marked (IS:2082)of5starrated verticalstoragewaterheaterwith outercasingmadeofM.S.sheetfinishedwithanti-corrosive powdercoating,innertankmadeofpureelectrolytic copper/stainlesssteel/SPHP,Tubularcoppersheathedand Nickel plated heating element/ twin ceremic cartridge heating element, stem type thermostat and thermal cut out, Dual indicating lamps for power supply and thermostat, PUF insulation, Pressure release valve,fusible plug etc. as required heldinpositionwith4no.ragbolts,dulywiredwith3core 2.5/4.0SqmmPVCinsulated&sheathedcopperconductor and16A/25AthreepinplugtopwithPortableResidual Current Device ( PRCD ) facility form OEM,including making inlet,outletheavygaugeC.P./Flexiblealloy connection,testingetc.completeinallrespect.Appropriate OEMtest certificate shallbe submittedby contractor.Allas per pre approved byEngineer in charge.For additional technicalparametersofproducts/work ,referAnnexureA attached with this BSR . 15 Ltr.
