|
| 1 | Providing wood work in frames of doors, windows, clerestory windows and other frames,wrought framed and fixed in position with hold fast lugs or with dash fasteners of requireddia & length (hold fast lugs or dash fastener shall be paid for separately).Sal wood |
| 2 | Providing and fixing panelled or panelled and glazed shutters for doors, windows andclerestory windows, including ISI marked M.S. pressed butt hinges bright finished ofrequired size with necessary screws, excluding panelling which will be paid for separately,all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessaryscrews shall be paid separately)30 mm thick shutters |
| 3 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazedshutters for doors, windows and clerestory windows (Area of opening for panel insertsexcluding portion inside grooves or rebates to be measured). Panelling for panelled orpanelled and glazed shutters 25 mm to 40 mm thick :Kiln seasoned and chemically treated hollock wood |
| 4 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mmdiameter bolts, nuts and wooden plugs and embedding in cement concrete block30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mmnominal size). |
| 5 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) withnecessary screws etc. complete :150x10 mm |
| 6 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc.complete :250x16 mm |
| 7 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 withnecessary screws etc. complete :100 mm |
| 8 | Dismantling doors, windows and clerestory windows (steel or wood) shutter includingchowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :Of area 3 sq. metres and below |
| 9 | Fixing chowkhats in existing opening including embedding chowkhats in floors or wallscutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stoneaggregate 20 mm nominal size), painting two coats of approved wood preservative to sidesof chowkhats and making good the damages to walls and floors as required complete,including disposal of rubbish to the dumping ground, all complete as per direction ofEngineer-in-Charge.Door chowkhats |
| 10 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to bespecified by the manufacturer) of 1st quality conforming to IS : 15622 of approved makein colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cementmortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqmincluding pointing the joints with white cement and matching pigment etc., complete. |
| 11 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622(thickness to be specified by the manufacturer), of approved make, in all colours, shadesexcept burgundy, bottle green, black of any size as approved by Engineer-in-Charge, inskirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointingin white cement mixed with pigment of matching shade complete. |
| 12 | Grading roof for water proofing treatment withCement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mmnominal size) |
| 13 | Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to anypitch, including fixing with polymer coated \"J\" or \"L\" hooks, bolts & nuts 8mm dia. G.Iplain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. Thesheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3%ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. Theyshall be of uniform pigmentation and thickness without air pockets and shall conform to IS10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented,textured or smooth as specified.2 mm thick corrugated (2.5\" or 4.2\" or 6\") or step-down (2\" or 3\" or 6\" ) as specified |
| 14 | Brick work with clay flyash F.P.S. (non modular) brick of class designation 7.5 in Foundation & Plinth in :Cement mortar 1:4 (1 cement : 4 coarse sand). |
| 15 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircasesand spiral stair cases above plinth level up to floor five level, excluding the cost ofcentering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement: 1.5 coarsesand (zone-III)derived from natural sources: 3 graded stone aggregate 20 mm nominalsize derived from natural sources). |
| 16 | Labour cost for steel renforcement |
| 17 | Centering and shuttering including strutting, propping etc. and removal of form forSuspended floors, roofs, landings, balconies and access platform |
| 18 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate)finished with a floating coat of neat cement, including cement slurry, but excluding thecost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate |
| 19 | Demolishing cement concrete manually/ by mechanical means including disposal ofmaterial within 50 metres lead as per direction of Engineer - in - charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 20 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plasterincluding disposal of rubbish to the dumping ground within 50 metres lead. |
| 21 | 6 mm cement plaster of mix :1:3 (1 cement : 3 fine sand) |
| 22 | 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) |
| 23 | 12 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) |
| 24 | Distempering with 1st quality acrylic distember (Ready mix) having VOC content lessthan 50 grams/ litre of approved brand and manufacture to give an even shade :Old work (one or more coats) |
| 25 | White washing with lime to give an even shade :Old work (two or more coats) |
| 26 | Orissa pattern W.C. pan of size 580x440 mm |
| 27 | Providing and fixing white vitreous china pedestal type (European type/ wash down type)water closet pan. |
| 28 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device(handle lever) conforming to IS : 7231, with all fittings and fixtures complete.10 litre capacity - White |
| 29 | P/F \"P\" & \"S\" trap do-do complete job. |
| 30 | Colour washing two or more coats do-do complete job. |
| 31 | Removing dry or oil bound distemper, water proofing cement paint and the like byscrapping, sand papering and preparing the surface smooth including necessary repairs toscratches etc. complete. |
| 32 | Removing white or colour wash by scrapping and sand papering and preparing the surfacesmooth including necessary repairs to scratches etc. complete |
| 33 | Painting with synthetic enamel paint of approved brand and manufacture of requiredcolour to give an even shade :One or more coats on old work |
| 34 | Applying priming coat:With ready mixed pink or Grey primer of approved brand and manufacture on wood work(hard and soft wood) |
| 35 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified bythe manufacturer) with water absorption less than 0.08% and conforming to IS:15622,of approved brand & manufacturer, in all colours and shade, laid on 20 mm thickcement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3kg/sqm including grouting the joints with white cement and matching pigments etc. Thetiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be donewith the notch trowel, plier, wedge, clips of required thickness, leveling system and rubbermallet for placing the tiles gently and easily.Size of Tile 600 x 600 mm |
| 36 | Providing and laying Vitrified tiles in different sizes (thickness to be specified bymanufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, ofapproved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed ofcement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joint with white cement & matching pigments etc. completeSize of Tile 600x600 mm |
| 37 | Steel Work Structural steel work riveted, bolted or welded in built up sections, trusses and framedwork, including cutting, hoisting, fixing in position and applying a priming coat ofapproved steel primer all complete. |
| 38 | Total impact of GST for the purpose of CTC |
