Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 05-02-2025 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 12-02-2025 |
| 2 | 24-01-2025 | Revised BOQ 2 | BOQ | 05-02-2025 |
| 3 | 20-01-2025 | Revised BOQ | BOQ | 05-02-2025 |
| Sl. No. | Item Description |
| 1 | SCHEDULE A PART-IDismantling Stone slabs and tiles of any description or thickness layed bedded and pointed in any mortar in floors, aprons etc |
| 2 | Roughening surfaces of old concrete floor by hacking and by picking,sweeping clean and washing down with water to remove dust, etc. to receive tiles all as specfied and directed |
| 3 | M&L 75mm thick (averaging) Cement concrete type C-2, 1:3:6 (40mm graded aggregate) as in sub base complete all as specified and directed. |
| 4 | M&L for Machine cut pre posished kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, cutting upto mirror finish and polishing complete, laid over and including screed bed or bedding layer 15mm thick for laying floor finishes in cement mortar 1:6 to recive tiles complete all as specified and directed. |
| 5 | M&L for pre polished Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over and including backing coat of 10mm thick in CM 1:3. and jointed with with grey cement slurr mixed with pigment to match the shade of the slab including rubbing, cutting upto mirror finish and polishing complete |
| 6 | M&L for preparation of old surfaces on walls (plastered or unplastered or previously white washed) and applying one coat of white wash complete all as specified. |
| 7 | M&L for complete removal of old surfaces on walls (plastered or unplastered or previously white washed) and applying three coat of white wash complete all as specified |
| 8 | M & L for preparation of old steel surfaces of any description over 10cm width or girth & applying one coat of synthetic enamel paint complete all as specified. |
| 9 | S&F in repairs Expanded metal, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members n.exc. 4Kg/Sqm weight all as specified and incl dismantling of existing MS sheets any type |
| 10 | M&L applying 2 coats of synthetic enamel paint over a coat of red oxide on new steel surfaces over 10 cm width or girth including preparation of surface complete all as specified and directed. |
| 11 | M&L for Brickwork with subclass ‘B\" bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 incl demolition of brick work or stone masonarycomplete all as specified and directed. |
| 12 | M&L for rendering 15mm thick in CM 1:4 as stone masonary surface making surface fair & even without using extra cement with integrated Water Proofing compound including taking down of existing cement plaster of any descriptiong complete all as specified and directed. |
| 13 | M&L for prepration of surfaces of walls (plastered or unplastered or previously white washed) and applying three coat of white wash complete all as specified. |
| 14 | Extra for forming fair finished as in repair for drain or channel 30 cm inner girth in Cement concrete, using ex-tra cement, including forms, moulds, mi-tred/stopped ends etc. |
| 15 | M&L for Second class hard-wood in scantlings jalli frames incl dismantling of existing all as specified and directed |
| 16 | M&L for preparation of new or previously untreated wood based surfaces of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as directed. |
| 17 | SCHEDULE A PART-IIM & L Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out In Hard/dense soil.completed all as specified |
| 18 | Surface excavation n.exc. 30 cm deep and averaging 15 deep and getting out in soft loose soil. |
| 19 | Excavating in trenches, by mechanical means(hydraulic excavator) n exc 1.5 m wide and n exc 1.5 m in depth; for Plinth Beam & Dwarf Wall, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth for Dwarf Wall and getting out in Hard/dense soil. |
| 20 | Excavating in trenches, n. exc. 1.5 m wide and n. exc. 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in hard/dense soil. |
| 21 | Excavation in trenches not exceeding 1.50 m wide and n.exc 1.5 m in depth for foundation of poles, cable etc, not exc 10 sqm on plan and getting out in soft/loose soil including taking out brick protection etc complete all as specified and directed. |
| 22 | M & L Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface |
| 23 | M & L Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) |
| 24 | M & L Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall |
| 25 | M & L Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area |
| 26 | M & L Cement concrete in foundations, filling and mass concrete 1:4:8 using 40 mm graded aggregate (For Foundation) |
| 27 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in Hard/dense soil. |
| 28 | Removing excavated material in Hard/dense Soil n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point |
| 29 | M & L RCC- M-30 (Design Mix) using 20mm graded aggregate For Footing and plinth beams |
| 30 | M & L RCC- M30 (Design Mix) using 20mm graded aggregate for Column complete all as specified and directed |
| 31 | M & L RCC- M30 (Design Mix) using 20mm graded aggregate for beams and lintels complete all as specified and directed |
| 32 | M & L RCC- M30 (Design Mix) using 20mm graded aggregatefor RCC Slab |
| 33 | M & L RCC- M30 (Design Mix) using 20mm graded aggregatefor RCC Chajja. |
| 34 | S & F TMT bars 10mm dia & over of Grade Fe 500 incl cutting, bending, binding & placing in position with binding wirefor footings Slab beams roof slab etc complete al as specified and directed |
| 35 | Ditto but 5 to 10mm dia in stirrups, spacers & binders. |
| 36 | M & L Form workfor rough finished surfaces of concrete measured flat for For Footing |
| 37 | M & L Form workfor rough finished surfaces of concrete measured flat for Column, |
| 38 | M & L use & waste Form workfor rough finished surfaces of concrete measured flat for Plinth Beam |
| 39 | M & L use & waste Form workfor rough finished surfaces of concrete measured flat for RCCbeams sides and soffits |
| 40 | M & L use & waste Form workfor rough finished surfaces of concrete measured flat for RCCSlab |
| 41 | M & L use & waste Form workfor rough finished surfaces of concrete measured flat for RCCchajjas |
| 42 | M & L Pre-cast cement concrete block masonry with solid blocks Type C1 1:3:6, exc. 10 cm in width and setting in Cement mortar (1:6) mortar, complete. |
| 43 | S& Ffactory made WPC solid door frames of size 65x100mm completeall asspecified .and directed |
| 44 | S& Ffactory made single extruded WPC solid door shutters decorative type flush door of size 35mm completeall asspecified .and directed |
| 45 | S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with Square tube, supply and fixing in opening as perspecification given under SSR Part II 2010 including making good the disturbed surface all as specified and directed. Make: SYNTEX/SHALIMAR/RAJSHRI |
| 46 | M&L for factory made solid PVC panel type PVC door shutter 30mm thick consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with moulded plain colour PVC \"C\" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rails, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent supplying and fixing in the frame at site as per specifications and drawing given under SSR Part II 2010 complete all as specified and directed. Make : SYNTEX/SHALIMAR/RAJSHRI |
| 47 | S&F 35 mm thick plain , framed ,panelled shutters ( any number of panels),in 2nd class hardwood,with panels of timberflat on both sides (feather edged) ,or of veenered particle board medium density, wood particle board with commercial face veneers supplied and fitted to chowkats complete all as specified. |
| 48 | S & F 35 mm thick glazed and skeleton shutters, in 2nd class hardwood, open rebated and prepared to receive glass, gauze etc, (without sash bar )edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24(a) Complete al as specified and directed |
| 49 | S & F Rolled Mild Steel Framed work as in doors or Gates of angle or other section confirming to Fe 410 - S, with gusset plates, rails braces, etc., complete, drilled for fixing of steel sheeting or other covering and hanging and fixing complete. |
| 50 | S&F extruded aluminum alloy handles (150mm ) fabricated type anodised complete all as specified Make :- Shalimar / jyoti/ Classic/ Ashoka |
| 51 | S & F for 125mm aluminium handles, cast type, anodised complete all as specified and directed. |
| 52 | S&F hinges (125 mm) cold rolled mild steel medium weight complete all as specified |
| 53 | S & F forcontinuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flaps 30mm (when open)complete all as specified and directed. |
| 54 | S&F aluminum anodised barrel tower bolts (150 mm ) of extruded section complete all as specified |
| 55 | S&F 300 mmAluminium alloy , anodised , sliding door bolt with hasp, staple (bolt type ) and fixing clips of sheet , cast , exctruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified |
| 56 | S & F For powder coated aluminium sections frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 57 | M&L for Ready mix plaster 10 mm thickonfaces of bricks or concrete surface includingincluding preparation of wall surfaces etc complete all as specified and directed. |
| 58 | M&L for rendering 5 mm thick in ready mix plaster on ceiling surface and finishing the surfaces even and smooth without using extra cement including scrapping down and preparation of ceiling surfaces to receive plaster, scaffolding as reqd etc, complete all as specified and directed. |
| 59 | M&L for Ready mix polimer modified cement based plaster 12 mm thick on new bricks or concrete surface including preparation of wall surfaces etc complete all as specified and directed. |
| 60 | Material & Labour for applying two Coats Of Oil Bound Distemper Over One Coat Of Primer on Internal Wall |
| 61 | M& L forpreparation of old decorated surfaces of wall and applying Three Coat of White Wash on ceiling complete all as specified and directed |
| 62 | M& L forpreparation of old decorated surfaces of wall and applyingtwo coat of white washon ceiling complete all as specified and directed |
| 63 | M& L forpreparation of old decorated surfaces of wall and applyingtwo coat of white washon walls complete all as specified and directed |
| 64 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additivesM @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. |
| 65 | Material and labour for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface with stones.complete all as specified and directed. |
| 66 | M & L 75 mm thick Cement concrete type D-2 1:4:8 (40mm graded aggregate) as in Sub-Floors, Sub-Bases, Floors and pavings, etc all as specified and as directed. |
| 67 | M & L 100 mm thick Cement concrete type B-2 (1:2:4) (40mm graded aggregate) as in floors and pavings, etc all as specified and as directed. |
| 68 | M & L for Machine cut kota stone 18-20mm thick over cementscreed base, laid and mixedwith pigment to match the shade of the slab to full thickness of for flooring over cement screed bed 10mm thick in CM 1:4 and jointed with grey cement paste and slurry including rubbing and polishingcomplete all as specified and directed. |
| 69 | M & L for Machine cut kota stone 18-20mm thick over cementscreed base, laid and mixedwith pigment to match the shade of the slab to full thickness of for skirting over cement rendering 10mm thick in CM 1:4 and jointed with grey cement paste and slurry including rubbing and polishingcomplete all as specified and directed. |
| 70 | M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab over10mm thick backing coat in CM 1:4 including rubbing and polishing complete all as specified and as directed. |
| 71 | M& L for machine cut kota stone slab flooring 20-25 mm thick overscreed bed over bedding layer of morar 15 mm in cement mortar 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfacey mixed with pigment to match theshade of the slab including rubbing and polishing |
| 72 | M & L for Machine cut cudappah stoneslab18-20mm thick over cementscreed base, laid and mixedwith pigment to match the shade of the slabwindow cills and jambs to full thickness of wall fixed in steps over cement rendering 10mm thick in CM 1:4 and jointed with grey cement paste and slurry including rubbing and polishingcomplete all as specified |
| 73 | M & L for machine cut cudappah stone slab as in window cills and jambs 20 mm thick to full thickness of wall fixed in steps over cement screed bed 20mm thick in CM 1:4 and jointed with grey cement paste and slurry including rubbing and polishing complete all as specified and directed. |
| 74 | M & L 75mm thick Plinth Protection PCC (1:3:6) using 20mm graded aggregate (0.75 m wide). |
| 75 | M & L for 3 mm thk APP modified roof treatment over existing roof slab etc to be executed through approved authorised applicator of the membrane manufacturer with the following specifications including dismantling / taking out existing water proofing treatmentcomplete all as specified and directed:-(a) Applying oil bound bitumen primer @ 0.40 litre/ Sqm manufactured by the same manufacturer as that of APP with a density 0.87-0.89 Kg per litre at 25 degree centigrade on the prepared dry surface.(b) Laying APP modified water proofing membrane reinforced with non woven polyester fibre weight not less than 160gm/Sqcm using butane torch by torchapplication with 10cm side lap and 15cm end lap. (c) Physical properties of membrane shall be as under:- (i) Membrane weight not less than 3.50 Kg/Sqm.(ii)Non woven polyester weight not less than 160gm /sqm.(iii) Softening point of membrane not less than 150 degree Celsius.(iv)Joint tensile strength-longitudinal not less than 650N/Sqcm and transverse not less than 450 N/Sqcm(v)Tear strength-longitudinal not less than 300 N & transverse not less than 250 N. (vi)Elongation : > 20% in both directions. (vii)Impermeability/water tightness at 2 Kgf/cm2.(viii) Water absorption - Not more than 1% on mass within 24 hours.(ix)Cold flexibility - Minimum (-) 20C.(x) Dimentional stability % change = Maximum 1%. (xi) thickness of memberane shall not less than 3 mm. Note bitumen primer will be meaasured seperately |
| 76 | Bitumen primer for use inwaterproofing and damp-proofing treatments |
| 77 | Screed bed or bedding layer of mortar CM(1:3) 10 mm thick |
| 78 | SUPPLY ONLY Water Proofing compound |
| 79 | Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin- charge. |
| 80 | Supply only 4mm thick sheet figured glass, pin head type and glazing with oil putty in square not exceeding 0.5 Sqm in each pane etccomplete all as specified and directed |
| 81 | Supply only stainless steel wire cloth of 0.36 mm nominal dia of wire and average width of aperture 1.40 mm , fixed in aluminium windows complete all as specified and directed. |
| 82 | S&F inrepair Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples Stainless steel wire cloth. 0.36mm nominal dia of wire andverage width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 83 | S&F in repairs steel work as in tubular (round/square/ rectangular shape of pipes as approved by Engr-in-Charge) trusses of semi circle shape upt height 6 mtr including post special shaped washers etc complete incl necessary nut bolts wind tiles and gusset plates etc using ERW or induction butt welded tubes conforming to IS 1161-1998 grade Yst-240 complete all as specified |
| 84 | S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut 5 cm but n.exc 10 cm long, 16 to 20mm complete all as specified |
| 85 | S & F in repairs Pre painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of colour having tensile stength of 550Mpa as in roof coverings/cladding to wall, fixed with self tapping screws as specified. |
| 86 | M&L preparation of new or previously untreated surface & applying two coat synthetic enamel Painting over a coat of preiming redred oxide zinc chrome complete all as specified |
| 87 | Material & Labour for preparation of new or old plastered surfaces of wallapplying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces complete all as specified and directed. |
| 88 | M&Lfor prepration of oldplastersurface of wall complete removal of existing treatment and two coats Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour Incl 2 mm plaster of paris putty complete, as per manufacturer\"s specification. |
| 89 | M & L preparing new surfaces of wallsapplying two coat of oil bound distemper over3mm thick wall care putty over a coat ofprimer complete all as specified & directed by EIC. |
| 90 | M & L for preparing old decorated surfaces of wall (plasterered or unplastered or complete removal of existing treatment) & applying two coat of oil bound distemper over3mm thick wall care putty over a coat ofprimercomplete all as specified. |
| 91 | M& L for preparation of newly or previously untreated surfaces of wood or wood based surfacesof any description not other wise described , over10 cm width or girth and applytwo coats of synthetic enamel paint over one coat of pink primer etc complete all as specified and directed. |
| 92 | M& L for preparation of old surfaces wood or wood based surfacesof any description not other wise described , over 10 cm width or girth and applytwo coats of synthetic enamel paint over one coat of pink primer etc complete all as specified and directed. |
| 93 | M & L Moorum /red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick spread, levelled and rammed including watering |
| 94 | M & L for hard core of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 10 cm thick watered and rammed to a true surface complete all as specified. |
| 95 | M & L Rendering 15 mm thick on fair faces of brick work or concrete surfaces using CM 1:4, finished the surface even and smooth all as specified and as directed. |
| 96 | M & L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade mixed with greay cement and pigment. |
| 97 | M & L for sand filling under floors or in foundations incl watering and consolidation complete all as specifed and directed. |
| 98 | Taking down cement plaster on brick or concrete surfaces etc, including raking out joints, hacking for key, scrubbing down with water , etc complete all as specified and directed. |
| 99 | M&L for 15 mm thick Polymer modified ready mixed cement based plaster in CM 1:4 with 40 % fly ash on fair faces of brickworkor concrete surfaces finished the surfaces even & smooth including Make Easy plast from wall plast chemplast, Ready Plast from ultra tech complete all as specified. |
| 100 | M&L for 12 mm thick Polymer modified ready mixedcement based plaster in CM 1:6 with 40 % fly ash on fair faces of brickworkor concrete surfaces finished the surfaces even & smooth including Make Easy plast from wall plast chemplast, Ready Plast from ultra tech complete all as specified. |
| 101 | Chipping, removing carefully loose/damaged concrete including plastering (total thickness upto 60mm ) from surfaces of RCC members, in any location by low impact Hammer/Breakar without damaging the structure & cleaning the surfaces with wire brush etc and disposal of debris out side MOD land complete all as specified and directed. Note : 1) Hard concrete shall not be removed by force |
| 102 | M&L for building up the profile of structural members by using polymer modified mortar from M/s. Krishna Conchem (Molith-PMM) ORPolymer mortar HB of Dr Fixit, upto 20mm thickness including levelling, profiling etc complete all as specified and directed. |
| 103 | M&L for building up the profile of structural members by using polymer modified mortar from M/s. Krishna Conchem (Molith-PMM) OR Polymer mortar HB of Dr Fixit while the bonding agent is still tacking, exceeding 20mm thickness and not exceeding 40mm thickness in two layers,each layer not exceeding 20mm, including levelling, profiling etc, complete all as specified and directed. |
| 104 | M&L for cleaning existing reinforcement with wire/ rotary wire brush to a shining bright finish, making the surfaces free from loose material, dirt etc complete and applying two coats of alkaline rust converting primer conforming to ASTM-B-117 of make. \"Feovert\" of \"Krishna Conchem\" OR \"Roff Rust Cleaner\" of \"Pidilite\" OR \"Shali Rustoff\" of \"STP Ltd\", on rebars with time interval of 1 hour between the coats, complete all as specified and directed. [Note :- Mode of measurement: superficial area covered between the end to end reinforcement bars (i.e., concrete area excluding all side covers) will be measured.] |
| 105 | M&L for Anticorrosive Treatment to Reinforcementusing IPNET-RB of M/s Krishna Conchem orEpoxy Zinc Primer of M/s. Dr. Fixitby application on exposed reinforcement in two coats with time interval of minimum 4 hours between each coat.The application shall be done by brush after cleaning/wire brushing to the exposed steel surfaces complete all as specified and directed.Note :- Mode of measurement: superficial area covered between the end to end reinforcement bars (i.e., concrete area excluding all side covers) will be measured. |
| 106 | S & F in repairs 19 mm thick alumnium powder coated curtain rails with fixing brackets stops rollers etc complete all as specified and directed |
| 107 | S & F in repairs Vitreous China wash basin, white, flat back, size 580x450 mm including brackets, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and directed. |
| 108 | S&F floor door stopper aluminium bodyover length of cover plate 140 mmand tonque anodised with hard drawn steel springfixed in floor complete all as specified and directed. |
| 109 | S&Fbevellededge mirrorof 600x450selected quality mounted on 6 mm thick AC building boardcommercialplyand fixed to wooden plugswith chromium plated screws ad cup washers complete all as specified and directed. |
| 110 | S&F standard aluminum section powder coated(min thickness 50 micron) in partition / frame and door shutter, sliding windows / ventilators and places otherwise not specified cut to size, jointed with cadmium plated steel screws, including rubber beading or gaskets for fixing glass or wire cloth or Bakelite sheet and all necessary fittings, hinges, screws, plugs, locking arrangements for windows, Nylon ball bearing etc completed all as specified and directed (Aluminum section shall be of make Jindal / Hindalco / Indalco).Note :- Weight of Aluminum sections for frames and shutters shall be only considered for payment.Cost of other consumables required for the item shall be deemed to be included in the quoted rate.However glass panes / Bakelite sheet / wire cloth / mortice lock / locking stay / floor spring / floor door stopper only will be measured and paid separately under respective items as supply only.Fixing by element of these items shall be deemed to be included in quoted rate. |
| 111 | S & F in repairs aluminium anodised grill DG-104/DG-10210 mm dia of extruded aluminium section of suitable size and frame including fixing with U clip or F section beading complete with all fitting and fixture and drilling required in RCC section in rectangular or arch type balcony opening of the building complete all as specified. (Make:- Deco Grill or equivalent) |
| 112 | Taking down chowkats or frame with shutters ( without taking off shutters from the frame ) not exceeding 1.5 Sqm each including complete all as specified and directed. |
| 113 | Taking down chowkats or frame with shutters ( without taking off shutters from the frame ) exceeding 1.5 Sqm but notexc4 Sqmeach including complete all as specified and directed. |
| 114 | S& Fsecond class hard wood , plain ,soild ,straight chowkats and frames, wrought , rebated on soild rounded orchamfered , put together with gule pinnedatjointsetccompleteall asspecified .and directed |
| 115 | Dismantling floor, hearth or wall tiling including cement mortar, hedding removing serviceable tiles to store and rubbish off the premises all as specified and directed . |
| 116 | Description all as per Serial item No 115 above but screed bed or bedding layer of morar 10 mm in cement mortar 1:4 on walls surfaces, such as skirting,to slab etc. complete all as specified and as dircted. |
| 117 | M&L for coloured Non-skidceramic tiles 7 to 8mm thick (square/ rectangular) of approved size, area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floors etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match, over and including 15mm thick cement mortar screedbed in CM 1:6 etc, complete all as specified and directed. |
| 118 | S& Fcoloured glazed ceramic tiles 350 x 250 x 7mm/450x350x7mm thick in dado/ skiting etc set and jointed in neat cement slurry and pointed in coloured cement to match, over and incl 10mm thick backing coat in CM 1:4complete all as specified anddirected. |
| 119 | M & L for Granite (of any type) tiles 20 mm thick overscreed bed over bedding layer of morar 15 mm in cement mortar 1:6 setmachine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed |
| 120 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations overrendering 10 mm thick in CM 1:6 on brickwork or concrete surfaces complete all as specified and directed. |
| 121 | S&F in repairs 15mm bore bib taps cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified and as directed. |
| 122 | S&F in repairs 15mm bore stop valve cast copper alloy screwed high pressure with crutch or butterfly handle, screwed both end for iron pipe or for union complete all as specified &directed |
| 123 | S&F in repairs 15mm bore pillar taps,chromium plated, cast copper alloy screwed high pressure with crutch or butterfly handle, screwed both end for iron pipe or for union complete all as directed. |
| 124 | S & F in repairs 10 litres PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed. |
| 125 | S&F Swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms) in repairscomplete all as specified and directed |
| 126 | M&L Grating doom 100mm dia of PTMT (Minimum weight 25gms) in repairs complete all as specified and as directed. |
| 127 | S & F PVC connections 15mm size with PTMT nuts of length 450mm |
| 128 | S&F cast iron Nahani trap 100mm dia out let including grating connecting jointing to waste pipe with lead jointing and taking out existing unserviceable traps by hacking out concrete joints and making good of surfaces complete all as specified and as directed . |
| 129 | Disconnecting following size of existing tanks, stacking safely for re-use (or lowering if required) and hoisting, reconnecting and refixing in positioncomplete all as specified.(a) up to 1000 litres capacity. |
| 130 | Taking up or down steel tubing and connections, including cleaning serviceable pipe for refixing and balance under schedule of credit all as specified and directed(a)15mm bore |
| 131 | (b) 20 mm bore |
| 132 | S&F GI Steel tubing medium grade with all fitting & fixed complete to walls & ceiling or laid in floors complete all as specified for the following size :-(a)15 mm bore |
| 133 | (b) 20 mm bore |
| 134 | Fixing only GI steel tubing medium grade with all fitting & fixing to walls/ceiling or laid in floor and complete all as specified for the following size :-(a)15 mm bore |
| 135 | (b) 20 mm bore |
| 136 | Taking down pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks etc, including cleaning or refixing or removal to store(measured overall as fixed along the centre line over fittings and accessories) |
| 137 | S & F 110mm bore PVC (SWR) pipes double socketed in any length with rubber ring joints fixed to walls |
| 138 | All as per item No 137 above,above but 75mm dia |
| 139 | S&F PVC (SWR) bends of 110mm bore. |
| 140 | S & F 75 mm dia bend |
| 141 | S&F 75mm bore PVC (SWR) branch piece single (Single Y ) equal or unequal |
| 142 | S&F 110mm bore PVC (SWR) branch piece single (Single Y ) equal or unequal |
| 143 | S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm. complete all as specified and as directed |
| 144 | M&L for special treatment of sunken portion of WCs and Bath room as per following stages:Stage 1 :- Demolition of WC including lime concrete and cement concrete coba etc and preparing the surfaces of existing sunken portion of WCs or bath etc with wire brush to remove all loose dirt, oil grease etc .Stage 2:- Providing10mm thick plaster in CM 1:4 with chemical of Dr. Fixit Pidicrete URP or plaster seal of STP LtdStage 3:-Applying Dr Fixit Primseal primer or STP Ltd(and allow to dry for 8 hours) under touch dry conditionStage 4:-Applyingtwo coats of water proofing decorative elastomeric coating system of Dr Fixit Raincoats with DFT 100 Micron or shalicry 215 of STP(The surface after painting one coats shall be allowed to dry of 6 hours before next coats) all as per manufacturer instructionStage 5:-Again rendering 10mm thick in CM 1:4 mixed withDr Fixit Pidicrete URP or plaster seal of STP Ltd.Stage 6.All CI joints shall filled with mixture of cement fine sand and plaster seal of STP Ltd or Dr Fixit pidicrete URP.Stage 7:-Making holes in wall and fixing600mm long 20mm dia GI spout for draining the surplus water if any. |
| 145 | M & L for cement concrete 1:5:10 Type E2 (using 40mm graded stone aggregate) as in filling in sunken floor etc complete all as specified and directed. |
| 146 | S & F Wash down water closet (Pedestal pattern), complete white (excluding fixing bolts, flushing cisterns and flush pipe) complete all as specified and directed by EIC. |
| 147 | Dismantling boarding any descriptionfixed in any position with nails complete all as specified and directed . |
| 148 | S&F 18/19 mm thick prelaminated particle boardboth sides , interior grade , of approved shade and pattern fixid with screws to timber frame with beading piece for cupboard and shelves complete all as specified |
| 149 | M & L for Antitermite treatment along the external wall below concrete for masonary apron using chemical emulsion @ 2.25 litre per linear meter incl drilling and plugging 12 mm dia holes holes in appron complete alll as specified.l |
| 150 | M & L for Antitermitetreatment of soil under existing floors using emulsion @ one litre per hole 300 mm drilling apart including drilling and plugging 12 mm dia holes with cement mortar 1;2 (1 cement 2 coarse sand ) to match the existing floors.complete all as specified and directed |
| 151 | M & L for treatment at point of contact of wood work by chemical emulsion (in oil or cerosine based solution) @ 0.5 lit/hole by drilling 6 mm dia holes at a downward angle of 45 degree at 150 mm centre to centre complete all as specified and directed |
| 152 | M & L in repairs forpoint wiring with PVCinsulated FRLS unsheathed 1100 Volts grade single core multistranded copper conductorcable 1.5 Sqmm drawn in and including PVC concealed conduit of suitable size of wall/ RCC slab/ ceiling/ colunms/ beams etc with all accessories, fittings, PVC junction boxes etc, with suitabe sunk pressed steel boxes for modular fittings not less than 1.6 mm thick, including Modular cover plate of suitable size etc with necessary fixing accessories andearth continuity conductor cable of 1.5 Sqmm size connected to common earth and earth dolly including 1.6 mm thick pressed steel terminal boxes concealed in wall mounting switches / sockets / fan regulators fixed with Cadmium platedmachine screws complete etc all as specified for one light / fan / bellpoint controlled by one switch. Note : 1.Two runs ofcable, one run of earth wire, one run of PVC conduit will be measured and paid one unit.Make of conduit :- Sudhakar/ Precision/ Diamond,Make of wire :- Finolex/ Havells/ Polycab/ KEI/Benlo |
| 153 | -Ditto- all as per item No 152 above but for one 5A 2pin/3pin socket out let multipurpose on the same board with other switches. |
| 154 | -Ditto- all as per item No 152 above but for one 5A 2pin/3pin switch socket out let multipurpose on independent Board. |
| 155 | All as per item No. 152 abovebut wiring complete with 2.5Sqmm for 3 pin 15A socket multipurpose on independent board |
| 156 | S&F modular type6A one way SP switch 1 moduleconfirming to IS: 3854-1997 with fingure proof terminal complete all as specified and directed. Make: Anchor/Havells/Bentec |
| 157 | S & F in repairs ceiling rose three terminal, 230 Volts PVC / Polycarbonate body, complete all as specified and directed.Make : Anchor (Panasonic)/Legrand/ Havells (Crabtree) |
| 158 | S & F Modularcover plate 6 modules complete all as specified and directed. |
| 159 | Supply & Fix Heavy duty Metallic Body Exhaust fan of sweep 300 mm with frames, blades including provision of mounting anchor fasterners aluminium louvers made of aluminium sheet of 0.5 mm thickness provision of three core 1.5 sqmm copper cable from ceiling rose to fan, making opening of required size in cement mortar brick wall/ RCC for fixing of exhaust fan, making good the disturbed surfaces in CM 1:4 including scafolding if any required to carry out the work in building of height up to 20 meters complete.Make: Orient/Bajaj/Crompton/Almonard |
| 160 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and directed. Make :- Almonard/ Orient/ Bajaj |
| 161 | Taking down old unserviceable Exhaust fan 300 mm sweep by disconnecting the electric power supply, unscrewing the bolts and nuts, removing the blades and transporting to workshop to undertake repairs by rewinding of burnt out winding using suitable gauge copper wire and bearing including scrapping of old paint and applying two coats of synthetic enamelled white paint over a coat of red oxide primer complete and refixing back at site complete all as directed. |
| 162 | Taking down old unserviceable ceiling fan 1200 mm sweep by disconnecting the electric power supply, unscrewing the bolts and nuts, removing the blades and transporting to workshop to undertake repairs by rewinding of burnt out winding using suitable gauge copper wire, replalcement of worn out capacitor 2.5 mfd - 01 No., PVC canopy - 02 No\"s and bearing including scrapping of old paint and applying two coats of synthetic enamelled white paint over a coat of red oxide primer complete and refixing back at site complete all as directed. |
| 163 | Supply and fix in repairs high speed Ceiling fans complete with aluminium blades, down rods, PVC Canopy and accessories, white in colour 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value min 6.00, BEEFive star rated with brushless direct current motor(BLDC) without remote complete including taking down old unserviceable fan to MES store all as directed by Engr-in-Charge.Make : Havells (Efficiencia Neo (BLDC 26 W) /Orient (FALCON 400) /Bajaj (ENERGOS 28)Note : Fan Regulator will be paid seperately under respective itme of BOQ and Unserviceable ceiling fans shall be deposit to MES store. |
| 164 | Supply & Fix LED based Aluminium batten type fitting of capacity 20W, operating on 230V, 50Hz, AC Supply having luminous efficacy of not less than 100 lumens/watts, CCT 6500K, P.F>0.9, 2.5 KV surge protection, 4-feet long, housing made out of engineering plastic with decorative end caps elegently designed complete all as specified. Make - Bajaj/ Wipro/ Jaquar/ Halonix |
| 165 | Supply & Fix MCB DB Double Door SPN 4 way 240 volts including connecting up with existing cable with new lugs. The DB Shall be of Make - Havells/Indoasaian/Legrand/ABB/Schnider |
| 166 | S & F MCB DB, 12 way, SPN, double door, 240 Voltsand including cutting chases in wall, concealing DB in wall, making good the disturbed surfaces and making all connections complete including taking down old u/s DB\"s all as specified and directed.Note: Quoted rate shall be deemed to include for provision of copper bus bar of 200 Amps rating. |
| 167 | Supply and fixingSP 5A to 32 amp rating 240V, 10KA \"C\" curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning.Make: L&T/ C&S/ Havells |
| 168 | Supply and fixing SPN 32 amp rating 240V, 10KA \"C\" curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning.Make: L&T/ C&S/ Havells |
| 169 | S&F single pole and neutral enclosure with a two pinand earth and metal clad plug socket complete with one single pole MCB 20Amps 240Volts complete all as specified including concealed in wall and directed.Make:-Legrand/schneider/L&T |
| 170 | S & F MCB SPN 40 Amps, 240 / 415 Volts, 50 Hz, 10 KA Breaking capacity \"C\" Series complete all as specified and directed. Make - Legrand/ L&T/ Schneider/Bentec |
| 171 | M&Lin repairs for sub mainwiring with twosingle core 1.5 Sqmm PVC insulated FRLSH multistrandedflexible copperconductorcable 660/1100 volts grade downin throughnon metalicPVC concealed conduit of suitable size of wall/ RCC slab/ ceiling/ colunms/ beams etc with all accessories, fittings,PVC conduitwith and including 1.5 Sqmmsinglecore singlestrand copperconductoras continous earth wire in greencolour connected to commonearth dolly all as specified and as directed.(Make :- PRESFIT/ PRECISION - Casing caping), (Make :- FINOLEX/ KEI/ POLYCAB/Benlo - PVC Copper wire)Note : 1.Two runs ofcable, one run of earth wire, one run of PVC casing capping will be measured and paid one unit. |
| 172 | M&L for sub mainwiring with twosingle core2.5 Sqmm PVC insulated FRLS multistrandedflexible copperconductorcable 660/1100 volts grade downin throughPVC concealed conduitwith and includingPVC insulated 1.5 Sqmsinglecore singlestrand copperconductoras continous earth wire in greencolour connected to commonearth dollyincluding taking down old unserviceable submain wiring complete all as specified and as directedNote : 1.Two runs ofcable, one run of earth wire, one run of PVC casing capping will be measured and paid one unit.Make of wire : KEI/ BENLO/ Polycab/ Anchor(Panasonic) |
| 173 | M&L for sub mainwiring with twosingle core 4.0 Sqmm PVC insulated FRLS multistrandedflexible copperconductorcable 660/1100 volts grade downin throughnon metalicPVC casing capingwith and includingPVC insulated 4 Sqmmsinglecore singlestrand copperconductoras continous earth wire in greencolour connected to commonearth dolly all as specified and as directed. (Make :- PRESFIT/ PRECISION - Casing caping), (Make :- FINOLEX/ KEI/ POLYCAB - PVC Copper wire)Note : 1.Two runs ofcable, one run of earth wire, one run of PVC casing capping of 4.0 sqmm will be measured and paid one unit. |
| 174 | M&Lin repairs for sub mainwiring with twosingle core 6.0 Sqmm PVC insulated FRLSH multistrandedflexible copperconductorcable 660/1100 volts grade downin throughnon metalicPVC concealed conduit of suitable size of wall/ RCC slab/ ceiling/ colunms/ beams etc with all accessories, fittings,PVC conduitwith and including6 Sqmmsinglecore singlestrand copperconductoras continous earth wire in greencolour connected to commonearth dolly all as specified and as directed.(Make :- PRESFIT/ PRECISION - Casing caping), (Make :- FINOLEX/ KEI/ POLYCAB/Benlo - PVC Copper wire)Note : Two runs ofcable, one run of earth wire, one run of PVC casing capping will be measured and paid one unit. |
| 175 | S & F LED light fitting 1X10W Bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.Make: Bajaj/ Wipro/Crompton |
| 176 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25.0 sq mm 3.5 coreMake : Polycab/ KEI/ Grandley |
| 177 | M & L for sand cushioning by spreading in trenches crushed sand by gently by punning down manually as in cable protection all as specified and as directed by Engineer -in-charge. |
| 178 | Supply and laying un-reinforced precast concrete cable cover class LV, type-I, flat size 250 mm x 150 mm x 40 mm laid in trenches all as specified.Make: Mehtab tiles/ National |
| 179 | S&F 4 Pole MCCB 63 Amp, 50 Hz, 415 V with rupturing capacity 25 KA.Make: C&S/ L&T/ Schnieder |
| 180 | Supply And Fix in repairs MCCB DB TPN 6 Way double door100 Amps prewired suitable for Triple Pole 63 A MCCB as incomer with the following acessories & connecting of existing cables & providing of acbel glands, a) MCCB TPN 63 A 25 KA 415 Volt - 1 Nosb) MCB TPN 40 A 25 KA 415 V- 1 Noc) MCB SPN 25 A 25 KA 230V - 5 Nos.d) Bus bar, Din rail , Neutral linkMake - L&T/Indoasaian/Legrand/ABB/Schnider |
| 181 | S&F in repair/replacement of building Security lightfitting 30/35 Watt made up of pressure die cast alluminium body with mid power LED as lighting sources and PC cover having Top opening separate driver compartment with IP66 protection and impact resistance of IK07 including fixing arrangements and taking down old rusted bracket fittings completeall as per directed by Engr- in – charge.Make: Wipro/ Bajaj/ Jaquar |
| 182 | M&L for cutting existing road/hard and dence soil not exc 45x50 cm in wide & depth getting out excaveted materials for laying GI tube; returning filling & well rammin watering finish surface 10 cm from top using PCC 1:3:6 not less than 4 inch thick; including removal of surplas soil all as per directed. |
| 183 | S&F of HDPE pipe 50 mm dia, PN-10 for laying in ground, raod crossing etc for cable protection including necessary fittings, clamps for supports, etc all as. Make-Tata/Jindal/Surya prakash. |
| 184 | M&L Earthing complete with galvanised iron strip 32X6mm earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion Note: (1). 7.5 RM GI strip in deemed to be included in quoted rates beyond 7.5 RM strip shall be measured and paid separately. (2) Rate quoted by the tenderer is deemed to include salt & Charcoal upto & above 450 mm top of GI earth plate. |
| 185 | Earthing complete with galvanised steel earth plate, electrode, 600x600x6.0 mm thick burried directly in ground (earth pit not less than 2.25m deep below normal ground level) connected to galvanised earth lead wire 4.0mm dia by means of nuts, bolts, & washers of GI as shown in electrical plate No. 5 of SSR Part-I. Connected to earthing test point all as specified and including necessary earth pit PCC 1:3:6 chamber be 50mm thick PCC 1:2:4 chamber cover with 6mm dia mild steel reinforcement of 10 cm c/c spacing both ways in lieu of CI cover, watering arrangement shall be made with GI pipe medium grade of 20mm dia including funnel and protection to earth lead shall be provided with GI pipe light grade 15mm dia upto 7.5 from the earth plate electrode & refillling of soil etc including necessary excavation & earth work in any strata and PCC chamber complete all as specified and directed by Engr-in-Charge including demolish existing earth pit taking out old materials. |
| 186 | M & L for earthing chemical with copper plated 50 mm dia pipe 3 mtr long(100 microns) including Electrodite 50 Kg buried directly in ground including earth bore hole work (earth bore not less than 3 Mtr deep below normal ground level and connected to copper earth strip of size 20×3 mm by means of copper nuts bolts with washers and connected as per following specifications completeall as directed by Engineer-in-Charge.(a) Product Model: ASEEL 19 CP, 3 meter long (Copper Plated) – 100 microns .Fast Electrode, Model FE 80 mm 3 mtr (Pure Copper Single Pipe), Outer Dia is 80 mm with a wall thickness of 2 mm, Inner Dia is 26 mm with a wall thickness of 2.6 mm, Overall Length is 3000 mm,External Corrosion Protection: Copper Plated (100+ microns), Internal Corrosion Protection: In addition to Copper Plated (100+ microns), a ground breaking corrosion resistant Crystalline Conductive Compound is filled and compacted in the cavity within the pipes to enhance the electrodes performance. Conforms to IS: 3043 - 1987 i.e., Code Of Practice For Earthing (+ 10%) variations in dimensions applicable. (b) Electrodite backfill: Fast Electrode Earth Enhancement Compound, Manufactured using Eco - Friendly minerals, Blended homogeneously with conductive carbon(s), Resistivity: < 5 ohm-metre (In ideal moist conditions); > 5 ohm-metre (Dry Conditions), Ph Value: 7.0 - 8.5, High water retention capacity, Hygroscopic, Ionic & Electronic conduction, Swells when it comes in contact with water thereby engaging constant contact between the electrode surface & soil which is a crucial aspect in the performance of an earthing system. Packing Size : 2 Bags of 25 kilograms,Recommended for normal soil conditions. Conforms to IS : 3043 – 1987.(c)Installation of earthing with bore well machine complete for bore exceeding upto 4.5 meter below ground level complete all as specified and directed by Engr-in-Charge. |
| 187 | Supply, installation, test, and commissioing of online UPS for 30 min backup three phase AC input and three phase out put 3x400V AC (3Ph+N), microprocessor controlled generator compatible, auto by pass and emergency power off, pure sign wave with following specifications of capacity 60KVA Make: Power One Model PMP 60 or equivalent in Microteck/schneider Complete all as specified and directed by Engineer-in-charge.(A) INPUT : (i) Voltage- 400V AC / 415 VAC (3Ph + N),(ii) Voltage Range 290VAC ~ 480VAC (Ph-Ph),(iii) Frequency Range 45Hz to 55Hz(B) OUTPUT : (i) Voltage 380VAC /400VAC / 415VAC (3Ph + N),(ii) Voltage Regulation ± 1% ( battery Mode), (iii) Frequency & Waveform ± 1% 50 Hz / 60 Hz & Pure Sine Wave,(iv) Harmonic distortion less than or equal to 2% THD ( linear load),(v) Harmonic distortion less than or equal to 5% THD ( non linear load), Efficiency not less than 92%,(vii) Overload Capability 110% for 60 min, 125% for 10 min, 150% for 60 sec ,(viii) Protection- Over voltage, Under voltage, Short Circuit, Over temperature, Overload, (ix) Transient Response-±5% (Dynamic Regulation for 10% to 90% step linear load), (x) Transient Recovery < 1 cycle (Steady state condition after 10% to 90% step linear load), (xi) Crest Factor - 3:1 (C) Battery & Charger : (i) Battery Type VRLA SMF / Tubular / NICAD / Lithium ion(ii) Battery Numbers 12V x 32 Nos (29 ~ 32 Nos adjustable),(iii) Battery Voltage 384 VDC (348V-384V adjustable),(iv) Charging Current Battery 384 VDC (348V-384V adjustable), Default 10A; Maximum 40A, (E) STANDARDS: (i) EMI 62040-1,(ii) EMC 62040-2,(iii) Performance 62040-3,(iv) Quality Standards ISO 9001,ISO 14001,ISO 45001& ISO 50001 (F) COMMUNICATIONS: (i) Network Management RS232, RS 485 MODBUS, SNMP(G) ENVIRONMENTAL PARAMETER : (i) Ingress protection IP21,(ii) Operating Temperature 0- 50 °C,(iii) Humidity 0- 95% (Non Condensing),(iv) Altitude 0-1500 M without derating |
| 188 | Supply and Layingor fixing or passing through pipe, XLPE/PVC insulated, armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area50 Sqmm 3.5 core including necessary connection and providing cable lugs as required all as specified. Make: GRANDLEY / POLYCAB / KEI |
| 189 | S & F in repair MCCB 100 Amps, 36 KA Four Pole, MCCB with Thermal Magnetic Protection Unit 415 Volts including connecting up complete in existing panel with Lugs/Glands all as specified and directed with following specifications. Make: Legrand, Schneider, ABB, Siemens (i) Range: 100A, Ics=100%Icu, Four Optimum Frames(ii) Thermal Adjustable – 0.8 to 1In(iii) Breaking Capacity – 36kA(iv) Adjustable sensitivity: 0.03 - 0.3 - 1 - 3 A(v) Adjustable tripping: 0 - 0.3 - 1 - 3s(vi) Suitable for Isolation |
| 190 | S & F in repair MCCB 250 Amps, 36 KA Four Pole, MCCB with Thermal Magnetic Protection Unit 415 Volts including connecting up complete in existing panel with Lugs/Glands all as specified and directed with following specifications. Make: Legrand, Schneider, ABB, Siemens (i) Range: 100A, Ics=100%Icu, Four Optimum Frames(ii) Thermal Adjustable – 0.8 to 1In, (iii) Breaking Capacity – 36kA(iv) Adjustable sensitivity: 0.03 - 0.3 - 1 - 3 A(v) Adjustable tripping: 0 - 0.3 - 1 - 3s(vi) Suitable for Isolation |
| 191 | S&F modular type 2/3 pin combined shuttered type 6 Amps socket 2 module conforming to IS: 1293-2005 complete all as specified and directed.Make: Anchor/Havells/Bentec |
| 192 | S&F modular type 2/3 pin combined shuttered typr 16 Amps socket 2 module conforming toIS: 1293-2005 complete all as specified and directed.Make: Anchor/Havells/Bentec |
| 193 | S&F modular type16 A one way SP switch 1 module confirming to IS: 3854-1997 with finguer proof terminal complete all as specified and directed. Make: Anchor/Havells/Bentec |
| 194 | S&Fmodular type 120W step fan regulator of 2 module size conformng to IS: 11037-1984 complete all as specified and directed. |
| 195 | Supply & Fix Modular Bell push flush type 6 Amp, 1 module, 230 Volts complete all as specified and directed. |
| 196 | Supply and fix bell ding dong AC 230 V single pole.complete all as specified and directed.Make: Anchor/Maru/Vinay |
| 197 | Supply & Fix Surface/Wall mounted,indoor decorative type LED luminaire extruded aluminium batten in anodized finished with opal diffuser,with IP 20 Protection of capacity 20W operating on230V, 50Hz, AC Supply having luminous efficacy of not less than 100 lumens/watts, CCT 6500K, P.F>0.9, 2.5 KV surge protection, 4-feet long, housing made out of engineering plastic with decorative end caps elegently designed complete all as specified. Make - Bajaj BCLAV20W-LEDP/ Jaquar LGLZU1X022XC/ Halonix HLB-03-20-CW-AL-SQ-HL2 |
| 198 | Supply and fixing in repair LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC made out of engineering plastic batten with white acrylic cover sleek designb& high efficiency for wall & surface mounted applications comprising with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Make : Bajaj/Crompton/wipro/Jaquar |
| 199 | S & F Angular Holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings etc. all as specified and directed. |
| 200 | S & F LED Light Bulb 8/9 watt, Pin type of white colour, 230 V complete all as specified and directed. |
| 201 | S& F in replacement of GI steel tubing medium grade 40 mm dia and length up to 1.5 meter bent to shape of offset angle upto 45 degree for fixing of security /street light fittings including MS clamps made of 32mm x5mm flat iron, nuts , bolts, etc all as directed by Engineer in charge |
| 202 | Supply and fix indoor type vermin and weatherproof totally inclosed cubical type front operated, sufficient ventilation on sides cubicle type fabricated out of 2 mm thick CRCA sheet duly treated with seven tank process and painted epoxy powder coated siemens greycolour and with industrial type built in locking arrangement. The Panel indoor type cubical panel board IP 52 free standing floor mounted(CPRI approved manufacturers).The panel to be prewired with PVC insulated copper conductors appropriate current carrying capacity for connecting the incoming and out going MCCBs and MCBs. including disconnecting the LT panel and taking down the unserviceable cables and including MCBs. Energy meters of the panel shall be taking down and kept in safe custody for re-installation of site. Disconnecting the incoming and out going cable connection and dismantling the unserviceable conventional type industrial meter board and removing from site for further disposal and making LT UG cable connectioncomplete of suitable sizeand comprising of following items:-(a)INCOMER (i)MCCB 100 Amps 415V 25 KA 4 pole - 1 No. Make - L&T/ Legrand/C&S/ Schneider or equivalent(b) OUTGOING(i)MCB SPN 63 Amps \"C\" Series - 9 No. Make - L&T/ Legrand/C&S/ Schneider or equivalent(ii)MCB SPN 20 Amps \"C\" Series - 2 No.Make - L&T/Legrand/ C&S/ Schneider or equivalent(iii) Space for fixing of single phase electronic meter - 9 Nos.(c) BUS Bar 150 Amps TPN with colour coded heat shrinkable sleeve made out of Electrolytic Copper(d) METERING & INDICATIONi) Digital VAF meter with selector switch & 3 Nos ofCT\"s -1 Set, Make - L&T/ C&S/ Schneider or equivalentii) LED based Indication lamps for R,Y,B phases -1 Set (Set of Three), Make - L&T/ C&S/ Schneider or equivalent(e) Internal wiring with suitable size of PVC insulated stranded copper conductor cable duly crimped with copper lugs & ferruled.(f)Manufacturer Name plate and Danger notice board writtenin regional language Hindi and English. Note 1. Layout & specification of panels shall be got approved by GE before placing the order. |
| 203 | Supply and fixing HT cable route marker of disc made up of cast ironsize 150mmdia in the route of cable embossing \"HT 22 KV MES\" Painted with red colour synthetic enamel paintwith support height of 3 feet using aluminium paint complete all as specified and directed. |
| 204 | Supply and fixing LT cable route marker of disc made up of size 100mmdia in the route of cable embossing \" LT MES \" painted with yellow coloursynthetic enamel paint with support height of 3 feet using aluminium paint complete all as specified and directed. |
| 205 | M& L for iron strip of 32 x 10 mm of length 0.6mtr with red oxide paint and 2 coats of synthetic enamel paint with provision of nut bolt fitting/ revittingfor route marker complete all as specified and directed. |
| 206 | M&L for cable route tracing and marking forLT UG cable and marking with cable route markercomplete all as specified . One job for 1 KM of cable tracing Note: connected items will be paid separately such as fixing of route marker and route marker. |
| 207 | M&L for cable route tracing and marking forHT UG cable 22 KV and marking with cable route markercomplete all as specified . One job for 1 KM of cable tracing Note: connected items will be paid separately such as fixing of route marker and route marker. |
| 208 | Supply and fix illuminated sign board of PVC Acrylic sheetof size 1.5Mtr x 1.5 Mtrto shown the layout diagram of HT/LT with provision to hangat thane sub station matter and line diagram is also submit by contractor after tracing cable.complete all as specified and directedNote : A sum of Rs 61,409.00 towards sch of credit shall be deducated to arrive the contract sum. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
