|
| 1 | Notes : (i) The work consists of 02 jobs as under:- JOB (A) : DGNCC/12/CW/2024-25 & JOB (B) : ABD/MW/06/2024-25 (ii) Please refer schedule \"A\" notesbefore quoting the tender.(iii) Amount of Schedule of Credit shall be deducted off line by the department. |
| 2 | Demolition of brick work built in CM including all quions, arches, pillars etc complete all as specified. |
| 3 | M & L brick work with sub class \"B\"brick (old size) straight or curved on plan exc 6m mean radius in CM 1:6 completed all as specified. |
| 4 | Taking down cement or lime plaster of any description from stone or brick walls etc including raking out joints, hacking for key scrubbing down with water and disposing off the rubbish complete all as specified or directed. |
| 5 | M & L for rendering 15mm thickon fair faces of brick/ concrete surfaces in CM (1:4) mixed with water proofing compound @ 3% by weight of cement or as per manufacturers instruction finishing the surface even and smooth without using extra cement complete all as specified and directed. (WPC measured and paid seperately). |
| 6 | Supply only integral water proofing compound conforming to IS: 2645 - 1975 specification complete all as specified and as directed. |
| 7 | M & L for preparation of new plastered surfaces on walls andapplying two coats of exterior emulsion paint with anti algal properties (Apex ultima or equivalent) with white exterior wall care putty on over one coat of primer on walls complete all as specified and directed. |
| 8 | M & L for 15mm thick rendering on fair faces of brick/ concrete surfaces in CM (1:6) finished even and smooth without using extra cement complete all as specified and directed. |
| 9 | M & L for preparation of new plastered surfaces on walls and applying two coats of oil bound distemper with priming plastered and other surfaces with alkali resistant priming paint wall care putty complete all as specified and directed. |
| 10 | M & L for complete removal of old plastered surfaces on walls andapplying two coats ofoil bound distemper over with wall care putty with priming plastered and other surfaces with alkali resistant priming paint complete all as specified and directed. |
| 11 | M & L for 10 mm thick rendering on ceiling surfaces in any position in CM (1:3) and finishing the surfaces even and fair complete all as specified and directed. |
| 12 | M & L for preparation of new plastered surfaces on ceilingsand applying two coats of oil bound distemper with priming plastered and other surfaces with alkali resistant priming paint with wall care putty complete all as specified and directed. |
| 13 | M & L for complete removal of existing treatment of ceilingsand applying two coats of oil bound distemper with priming plastered and other surfaces with alkali resistant priming paint with wall care putty complete all as specified and directed. |
| 14 | Taking down chowkhats or frames area exc. 1.50 Sqm and n. exc 4.00 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed. |
| 15 | Taking down chowkhats or frames area not exc. 1.50 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed. |
| 16 | S & F mild steel frame work as in door frames, conforming to Fe-410W (Gde E-250) including fixing of holdfast and hinges complete all as specified. (Note - Hinges shall be measured and paid separately) |
| 17 | M & L for Second class hardwood Glazed and skeleton shutters, 35mm thick, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, cham-fered or rounded, mitred and rebated sash bars, any numbers and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. cla-use 8.20 (a); supplied and fitted to chowkats. |
| 18 | S & F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete complete all as specified and directed |
| 19 | S & F Factory made solid panel PVC door /cupboard shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 20 | S&F Solid PVC door frame of size 50x47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube, supplied and fixed in opening as per specification and drawingcomplete all as all as specified and directed. |
| 21 | S & Faluminium anodisedventilator with fixed aluminium frame of size 65 x 40 x 1.98mm thick fixed in vertical position with aluminium vertical members andhalf portion to be provided with 4mm thick pin head glass and remaining portion to be louvered using 4mm thick pin head glass and louvered portion covered with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm incl necessary channel frame work, rubber gasket, aluminium beading etc including taking down existing vantilator completeall as specified and directed. |
| 22 | S & F powder coated anodised Aluminium alloy sections sliding windows with frames of Jindal or equivalent and 3 track sliding shutters duly fitted with neoprene beading, glazing clips, two shutters tinted glass panes 4 mm nominal thickness one shutter with stainless steel wire cloth .36mm dia and average width of aperture 1.4mm , aluminium alloy handles/lock etc. complete all as specified and directed.Note: Thickness of chowkhats/Frame section and sliding shutter section shall be minimum 1.5mm(Note :Rates include all glazing/aluminium wire cloth, rubber packing, jointing cleats, glazing clips, aluminium snap beading, locking arrangements, handle, plastering and finishing the surface to match the exisiting surface after fixing of window.) |
| 23 | S&F in repair for 18/19mm thick Prelaminated interior grade Block boards, grade 2 quality, decorative type with decorative face veneer on one face solid core, general purposes type fixed with screws to timber frame work complete all as specified or directed. |
| 24 | S & F 30 mm flush shutter, solid core construction, with block board core and plywood face panel, commercial type on both side etc complete all as specified and directed. |
| 25 | S & F 25 mm dia fancy type curtain rod with brackets of stainless ends etc fixed in repaircomplete all as all as specified and directed. |
| 26 | S & F Floor door stopper 150mm of aluminium alloy body and tongue, anodised, with hard drawn steel springcomplete all as all as specified and directed. |
| 27 | S & F 100 mm long mild steel butt hinges, medium weight cold rolled complete all as specified and directed. |
| 28 | S&F in repairs door closer aluminium (extruded section) body hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg complete all as specified or directed. |
| 29 | S & F Aluminium anodised barrel tower bolt of extruded section 150 mm sizecomplete all as specified and directed. |
| 30 | S & F 150 mm size aluminium anodised door handlescomplete all as all as specified and directed. |
| 31 | M&L for sliding door bolt of 300mm long plateAluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixedcomplete all as all as specified and directed. |
| 32 | M & L cement concrete type C-2, 1:3:6 (40mm graded stone aggregate) as in, plinth protection providing 75 mm thickness complete all as specified or directed. |
| 33 | Demolition of stone slabs and tiles of any description or thickness as in floors, apron etc laid, bedded and pointed in any mortar complete all as specified and directed. |
| 34 | M & L for machine cut kota stone as in flooring, stair case landing. treads of steps etc, 18-25mm thick over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified including 15mm thick screed bed or bedding in cement mortar 1:6. all as specified and directed |
| 35 | M&L for 18-25mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. |
| 36 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified. |
| 37 | M & L for Glazed ceramic tiles coloured (300x450mm) x 7mm thick, on wall dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick backing coat of tiles in CM (1:4) complete all as specified. |
| 38 | M & L for non skid ceramic (colored),7 to 8 mm thick as in floor area of each tile 400x400 mm , set and jointed in neat cement slurry and pointed in white or colored cement to matchincl and over screed bed or beeding layers of mortar 15mm thick in CM 1:6 in floors, complete all as specified and directed. |
| 39 | Ditto as per item no 1.37 above but in vertical surfaces such as skirting over and including 10 mm thick backing coat in cement mortar 1:4 complete all as specified or directed. |
| 40 | Dismantling asbestos cement (corrugated or semi-corrugated etc.) sheets in roof covering complete all as specified. |
| 41 | S & F 0.50 mm thick pre-painted galvalume aluminium zinc coating galvanised iron based corrugated steel sheet with side lap and end lap of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall , including Ridge fixed with self tapping screws complete all as specified. |
| 42 | S & F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 43 | Dismantling timber scantlings 40sq. cm and over in section, in any position as specified. |
| 44 | Dismantling wrought iron or mild steel work of any description not otherwise providedcomplete all as specified. |
| 45 | M& LRolled steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connectiong plates complete including cutting, grinding, welding etcFe-290 (Gde E-165) as required complete all as specified. |
| 46 | S&F Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to FE 410-W (Gde-E-250, Quality-A) complete all as specified. |
| 47 | M & L for preparing newsteel & iron surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of redoxide complete all as specified. |
| 48 | Dismantling Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, includingcover fillets complete all as specified. |
| 49 | S & F 4mm thick coloured textured designer ceiling board (Everest) of size 595X595 mm fixing with screws/clips including Tee grid suspension system of size 600 mm x600 mm type-1 made out of roll framed hot dipped galvanised steel zinc coated of not less than 120 gm/sqm ,main runner shall be 0.3 mm thick of section 24 mmX33 mm cross runner 0.3 mm thickof section 24 mmx25 mm,wall angle shall be 0.63 mm thick of section 24 mmx24 mm grid shall be suspended by 4 mm dia adjustable quick fit hanger rod ,system exposed portion shall be pre painted polyster coated in off white/white in colour complete with material,fixing, jointing etc complete all as specified. |
| 50 | Dismantling water tanks and removing to store exceeding 500 ltrs and n exc 1000 ltrs complete all as specified . |
| 51 | S &F 500 ltrs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position incl connecting pipes securing access covers etc complete all as specified. |
| 52 | S & F ball valves high perssure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed 20 mm bore, complete all as specified. |
| 53 | Taking up or down steel tubing15 mm bore of pipe and connections of any description and from any position incl cleaning for refixing or removing from sitecomplete all as all as specified and directed. |
| 54 | S &F Low density polyethylene pipes (LDPE) of pressure rating 6 kg/ cm2 of bore dia 15 mm complete all as specified and directed. |
| 55 | Taking up or down steel tubing 20 mm bore of pipe and connections of any description and from any position incl cleaning for refixing or removing from sitecomplete all as all as specified and directed. |
| 56 | S &F Low density polyethylene pipes (LDPE) of pressure rating 6 kg/ cm2 of bore dia 20 mm complete all as specified and directed. |
| 57 | S & F in repairs 10 ltrs capacity PVC valve less, syphonic action type flusing cistern, low level white with inlet ball valve float and handle including brackets fixed in repairscomplete all as specified and directed. |
| 58 | S & F in repairs Bib taps (long body )fancy type cast copper alloy, chromium plated for 15mm bore pipe, screwed for iron pipes or for brass ferrule all complete as specified and as directed. |
| 59 | S & F in repair 15mm bore PVC Connection with PTMT nut of length 450 mm complete all as specified and directed. |
| 60 | S & F in repair pillar taps, cast copper alloy with capston heads, chromium plated, screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly-nuts, screwed for iron pipe 15mm borecomplete all as all as specified and directed. |
| 61 | S & F in repair vitreous china wash down water closet pan (pedestral pattern), white including connection trap and to flushing pipe, anti-syphnoge pipe etc complete includingcomplete all as all as specified and directed. |
| 62 | S & F in repair PVC seat cover for pedestal pan, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminiumisedhanging device complete all as directed. |
| 63 | S & F in repairs health faucet spray type brass, chromium plated, and 1.5 m long PVC flexible pipe complete all as specified and directed. |
| 64 | S & F in repairsPTMT Swivel Shower rose,15 mm dia ( Minimum wt 40 gms),complete all as all as specified and directed. |
| 65 | S & F in repair 15 mm stainless steelbore angle cock with flage chromium plated complete all as specified and directed. |
| 66 | Excavation in trenches not exceeding 1.50 metre wide and not exceeding 1.5 metre deep for foundation etc., for shafts, wells cess pits manholes etc., not exceeding 10 sqm on plan and not exceeding 1.5 metre depth in soft/loose soil and getting out complete all as specified and as directed |
| 67 | Excavation in trenches not exceeding 1.50 metre wide for foundation etc., for shafts, wells cess pits,manholes etc., not exceeding 10 sqm on plan and exceeding 1.5 metre and not exceeding 3.0 metre depth in soft/loose soil and getting out complete all as specified and as directed |
| 68 | Demolition of cement concrete of any description and in any position not otherwise specially provided for complete all as specified or directed. |
| 69 | M&L for 200mm bore RCC Class NP-2 pipe with colars laid in trenches, jointed complete all as specified or directed. |
| 70 | M&L for cement concrete (1:4:8) type D2 (using 40mm graded stone aggregate) bedding to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 200mm internal dia of pipes complete all as specified or directed. |
| 71 | M&L for cement concrete 1:3:6, type C2 (using 40mm graded stone aggregate) in foundations, filling & mass concrete all as specified and directed |
| 72 | M&L for cement concrete 1:2:4, type B1 (using 20mm graded stone aggregate) as in coping, benching, kerb etc., rounded or chamfered on edges including necessary form work all as specified and directed |
| 73 | M&L for brick work with sub class \"B\" bricks built in cement mortar (1:4) straight or curved on plan & exc 6 metre mean radius with old size bricks all as specified and directed |
| 74 | Returning, filling in trenches including spreading levelling, watering well ramming in layers not exceeding 25 centimetre in soft/loose soil (from available soil) complete all as specified and as directed ( Qty 32.81 Cum for E/M part JOB B) |
| 75 | Removal of excavated material such as soils to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed( Qty 3.65 Cum for E/M part JOB B) |
| 76 | Cutting into existing manholes for connecting new drains, making good to pipe and rendering cutting out existing benching and forming branch channel in PCC (1:2:4) type B1 (using 20 mm graded stone aggregate), smooth finished all as specified for 150mm internal dia of pipes complete all as specified or directed. |
| 77 | Taking down carefully surface aluminium or copper point wiring with PVC casing-caping (light, fan, socket, bell or power) including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc and making good disturbed surfacescomplete all as specified or directed. |
| 78 | M&L for point wiring with 1100 volts grade PVC insulated FR-LSH multistranded copper conductor cable 1.5 sqmm (Phase - R Y B, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm diaISI marked with all conduit fittings / fixing accessories and sunken galvanized pressed modular steel terminal boxes of thickness not less than 1.2 mm covered with suitable and required size of modular box, plate with cover for mounting modular switches, sockets, fan regulators complete including making good the wall surfaces with matching colour on wall for the following |
| 79 | One light point controlled by one switch. |
| 80 | One ceiling/ex fan/Wall fan point controlled by one switch. |
| 81 | One socket outlet 6 amp controlled by one switch on the same board with other switches. |
| 82 | One socket outlet 6 amp controlled by one switch on indepdendent board. |
| 83 | M&L for Point wiring with 1100 volts grade PVC insulated FRLSH multistranded copper conductor cable 2.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 2.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm diaISI marked with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal box of thickness not less than 1.2 mm covered with suitable and required size of modular box for one 16 amp socket outlet controlled by one switch on independent board complete. |
| 84 | S&F modular switch one way 6 amp 1 module all as specified and directed |
| 85 | S&F modular switch one way 16 amp 1 module all as specified and directed |
| 86 | S&F modular socket6/16 - 2/3 pin combined 2 moduleall as specified and directed |
| 87 | S&F modular socket 6 amp 3 pin ISI marked 2 module all as specified and directed |
| 88 | S&F Ceiling rose 6 amp, 3 terminals polycarbonate body complete all as specified or directed. |
| 89 | Supply and fixing sheet metal enclouser single pole and neutral with a 2 pin and earth plug and socket 20 A 240V complete with one single pole MCB of capacity 20 A complete all as specified and directed.Make - Legrand/Hager /C&S/Indoasian |
| 90 | S&F LED 20W streetlight made up of pressure die cast aluminum housing with prismatic polycarbonate diffuser and individual LED\"s with secondary optics and IP65 protection complete with fixing arrangement and connections as directed |
| 91 | M&L for submain wiring alongwith earth continuity conductor with PVC insulated FRLSH multistranded copper conductor cable (Phase - Red, Neutral - Black, Earth - Green)drawing into andincluding concealed rigid non metallic PVC conduit, medium grade, ISI marked ivory colour along with accessories of following nominal sizes:- |
| 92 | 2x4 sqmm + 1x4 sqmm earth continuity conductor in 20 mm dia conduit.. |
| 93 | S&F MCB distribution board ETPN, 415 volts 4 way powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43- IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required. |
| 94 | S&F LED battenmade of PVC housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficacy of 100+ lumens per watt and total power consumption not less than 20 watt including driver. It has a rated system life time of 40000 burning hours at L70 and should have a color temperature of 6500K, CRI>80, THD < 10% and PF > 0.95inbuilt surge protection 4KV complete all as specified and directed. |
| 95 | S&F MCBs as per load requirement\"C\" series of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of following ratings:- |
| 96 | Single pole 6 to 32 amp. |
| 97 | Double pole 32 amp. |
| 98 | Taking down carefully aluminium or copper submain wiring with PVC surface conduit or casing caping and making good disturbed surfaces complete all as specified or directed. |
| 99 | Taking down MCB distribution boards with incoming and outgoing controls any make, any capacity after disconnecting complete all as specified or directed. |
| 100 | Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 35 sqmm 3.5 core. |
| 101 | Excavating in trenches in average type ofsoil, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation of poles, trenches for laying of cable, etc. and getting out complete all as specified and directed. |
| 102 | Supply and laying DWC(Double wall corrugated) HDPE pipe,ISI marked,IS 16205(part 24):2017 part 2 of outer dia 50 mm and inner dia 38 mmwith smooth internal and profiled external surface for non pressure underground cable including all connected acceseries like coupler,o-ring etc complete all as specified and directed Make : Rex Polyextrusion/Gemini/Astral |
| 103 | Cutting existing steel tubing for alterations or aditions of pipe size 40/50 mm bore and screwing complete all as specified & directed. |
| 104 | Supply and lay pipe galvanized, “Medium class”, including fittings 20 mm (3/4”) dia. |
| 105 | Supply and lay pipe galvanized, “Medium class”, including fittings 15 mm dia. |
| 106 | Supply and fix Valve, globe conforming to IS 9338, 50mm (2”) dia pipe. |
| 107 | S& F Rotational moulded polyethylene water storage tanks 1000 Ltrs capacity (cylindrical vertical with closed top) hoistedand fixed in position all as specified and directed. |
| 108 | S&F Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule andfixed complete all as specified or directed. |
| 109 | S&F 20 mm dia , Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed fancy type chromium plated complete all as specified or directed. |
