|
| 1 | B/R ITEMS |
| 2 | Demolition of floor hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises to out side MD land etc., complete all as specified and as directed. |
| 3 | Material and labour for coloured Vitrified Ceramic tiles of grade B-I (a),9-10 mm thick (square/ rectangular) polished, light shade, area of each tile exceeding 0.18 Sqm not exceeding 0.38 sqm, laid in floors of pattern as approved over and including 15mm thick screed bed in Cement mortar 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and as directed. |
| 4 | Material and labour for coloured Vitrified ceramic tiles of grade B-I(a), 9-10mm thick of size matching to floor tile as approved by GE,fixed in vertical surfaces such as in skirting/dado set and jointed in neat cement slurry and pointed in white or coloured cement to match floor tile over a backing coat in Cement Mortar 1:3, 10mm thick on fair faces of brick or concrete surfaces all as specified and as directed. |
| 5 | Material and labour for coloured Non Skid ceramic tiles, matt finish of grade B-II(a), 7 to 8 mm thick (square/ rectangular), light coloured group, area of each tile exceeding 0.11Sqm but not exceeding 0.18 sqm, laid in floors of pattern as approved over and including 20mm thick screed bed in Cement mortar 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to matchall as specified and as directed. |
| 6 | Material and labour for glazed coloured ceramic tiles of grade B-III, 7mm thick of size 300 x 250 or 450mm x 300mm or of size matching to floor tile as approved by GE,fixed in vertical surfaces such as in skirting/dado set and jointed in neat cement slurry and pointed in white or coloured cement to match floor tile over and including a backing coat in Cement Mortar 1:3, 10mm thick all as specified and as directed.. |
| 7 | Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area not exc.1.5 sqm each along with fittings including separating guard bars/grills/ wire mesh etc., complete all as specified and as directed. |
| 8 | Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area exc.1.5 sqm not exc 4sqm each along with fittings including separating guard bars/grills/wire mesh etc., complete all as specified and as directed. |
| 9 | Taking down shutters of any description exceeding 1.00Sqm but not exceeding 2 Sqm each complete all as specified and directed. |
| 10 | Supply and Fixpowder coated aluminium sections for frame of doors, windows, partitions etc., having thickness of powder coating not less than 50 micron and colour as approved by GE/ Engineer - in Charge with one or more rebates including necessary joining cleats etc., complete all as specified and directed. |
| 11 | Supply and Fix in repairs powder coated aluminium door shutters, having thickness of powder coating not less than 50 micron and colour as approved by GE, using aluminium section weighing not less than 0.55 Kg/Rm including necessary joining cleats, glazing clips, rubber neoprene packing, hinges, 2 Nos. of handles in each door shutter, powder coated aluminium snap beading, screws etc.,complete all as specified and as directed.Note : Powder coated Aluminium frame for Doors Glass panes and wire mesh shall be measured and pais separately. |
| 12 | Supply and Fix in repairs powder coated aluminium window and ventilator shutters, having thickness of powder coating not less than 50 micron and colour as approved by GE, sliding type without sash bar using aluminium section weighing not less than 0.55 Kg/Rm including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, rollers, interlocking handles etccomplete all as specified and as directed.Note : Powder coated Aluminium frame for two track/three track sliding windows, Glass panes and wire mesh shall be measured and pais separately. |
| 13 | Supply and Fix Powder coated aluminium grillhaving thickness of powder coating not less than 50 micron and colour, design/pattern as approved, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved poeder coated aluminium standard section around the opening etc., complete as per requirement and direction of Engineerin-charge. |
| 14 | Supply and Fix plain sheet glass pane, 4.8mm thick, ordinary quality and glazing with neoprene rubber / wooden beads in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed. |
| 15 | Supply and Fix stainless steel wire mesh with aperture n exc1.40 mm dia and of of wire 0.36 mm and fixed with existing/new wooden beading stapples/Aluminium shutters includingpainting to beading etc complete all as required and directed ground . |
| 16 | Material and labour for preparation ofold plaster surface of walls including plasters andapplyingone coat of oil bound distemper over a coat of primer Including filling crack, holes with putty complete all as specifed and as directed. |
| 17 | Material and labour for 2.0 mm thick Wall Care Putty in two or more coats including cleaning the wall surface with the help of sand paper, putty blade or with wire brush, then apply first coat of white cement based wall care putty on moistened surface and after surface dried, rub gently with wet sponge, then allow the surface dry for 3 hours and similarly apply second coat and leave for 10-12 hours and finally rub with very fine emery paper to get glossy surface complete all as specified and as directed. |
| 18 | Material and labour for preparation of old surface of ceiling and applying one coat of white wash complete all as specified and as complete all as directed.. |
| 19 | Supply and Fix 20mm dia stainless steel decorative curtain rod made out of stainless steel tube, standard quality of grade AI SI-304, polish finish of wall thickness not less than1.5mm, fixing to all opening and joineries portion complete all as specified and as directed. |
| 20 | Supply and Fix stainless steel decorative bracket with end holders for fixing curtain rod of 25mm diameter complete all as specified and as directed. |
| 21 | Demolition of PCC in ground floors and pavings not exceeding 15 cm thickness. (Below or above ground level) complete all as specified and as dircted. |
| 22 | Demolition of Brickwork or stone/boulder masonry, built in cement mortar or cement lime lime mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precastconcrete articles portions ordered to be dismantled. |
| 23 | Taking down cement plaster on brick or stone walls,etc including raking out joints, hacking for key scrubbing down with water etc., including removal of rubbish off the premises complete all as specified and as directed. |
| 24 | Material and labour for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and as directed. |
| 25 | Material and labour for rendering in Cement Mortar 15mm thick in two coats, i.e, in Cement Mortar 1:4, 5mm thick mixed with water proofing compound as per manufacturers\" instructions over in Cement Mortar 1:6, 10mm thick on other than fair faces of brick/concrete surfaces, finished even and fair externally complete all as specified and as directed.Note: WPC will be measured and paid separately. |
| 26 | Material and labour Rendering 10 mm thick on other than fair faces of brick wall or stone masnory in Cement mortar 1:4 and finished the surfaces even and smooth without using extra cement complete all as specified and as directed. |
| 27 | Supply onlyintegral water proofing compound of approved quality. |
| 28 | Material and labour for preparation of newly plastered surface of walls including pilasters and cornices etc., and Distempering two or more coats with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour all as per manufacturer\"s specification etc., complete all as specified and as directed. |
| 29 | Material and labour for preparation of newly plastered surface of walls including pilasters and cornices etc and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces complete all as specified and as directed. |
| 30 | Material and labour for for Preparation of new wall surfaces and applying two coatstextured exterior paint of required shade applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm complete all as specified and as directed. |
| 31 | Supply and Fix 2nd class hard wood 35 mm thick factory made plain framed pannelled shutter (any number of panels) with panels of timber flat on both sides (feather edged),or of veneered particle board medium density,wood particle board with commrercial face veneers fitted to chowkats with rail and stile as per IS-1003(part-1) klin seasoned and chemically pressure treated complete all as specified and as directed. |
| 32 | Supply and Fix 2nd class hard wood (SAL) plain solid straight chowkhat or frame, wrought, framed, rebated on the solid, put together with glue and pinned at joint including treating back of chowkats with coal tar etc., complete all as specified and as directed. |
| 33 | Supply and Fix 2nd class factory made hardwood glazed and skeleton door shutters, 35mm thick divided into squares, open rebated and prepared to receive glass, gauge etc., with sash bars, edges of framing plain, chamfered, rounded fitted with cut and mitred beads for securing glass etc, size of members as specified in SSR Part 1 section 8 clause 8.24 (b) supplied and fitted to chowkats complete all as specified and as directed. |
| 34 | Supply and Fix Mild steelhold fast made of flat iron conforming to Fe-290 Gde E-165 of size25 x 3 mm bent to shape required with splitting end and drilling holes for fixing nuts & bolts (including nuts & bolts) including treating the steel surfaces with tar or coal tar black paint and sanding neatly newly tarred surfaces with clean sharp sand all complete as specified and as directed. |
| 35 | Supply and Fix 19mm thick flush shutters, factory made, solid core construction with block board core and ply wood face panels, comercial type on both sides as in cupboard shutters all as specified and as directed. |
| 36 | Supply and Fix aluminium anodised barrel tower bolt 125 mm complete all as specified and as directed. |
| 37 | Supply and Fix aluminium anodised barrel tower bolt 200 mm long complete all as specified and as directed. |
| 38 | Supply and Fix 250 mm long Aluminum alloy anodised, sliding door bolt with hasp and staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy all complete as specified and as directed. |
| 39 | Supply and fix Butt hinges, 100mm length extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B-21, complete all as specified and directed. |
| 40 | Supply and fix Butt hinges, 125mm length extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B-21, complete all as specified and directed. |
| 41 | Supply and Fix extruded aluminium alloy handles fabricated types, anodised, each 100mm long complete all as specified and directed. |
| 42 | Supply and Fixextruded aluminium alloy handles fabricated types, anodised, each 150mm long complete all as specified and directed. |
| 43 | Material and labour for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel painting over a coat of pink primer complete all as specified and as directed. |
| 44 | Material and labour for preparation of old painted steel or iron surfaces of any description not other wise described over 10 cm width or grith andapplyingone coat of synthetic enamel paint on steel surfaces etc complete all as specifed and as directed. |
| 45 | Taking up or down old rusted steel tubing 15 mm bore with all fittings, concealed type including connection from wall/floor ceiling and separating serviceable pipes and setting aside for reuse etc., complete all as specified and as directed. |
| 46 | Taking up or down old rusted steel tubing 20 mm bore with all fittings, concealed type including connection from wall/floor ceiling and separating serviceable pipes and setting aside for reuse etc., complete all as specified and as directed. |
| 47 | Supply and Fix 20mm dia three layer PP-R polypropyline random copolymer concealed pipes SDR 7.4(PN-16) UV stablised and antimicroblal fusion welded having thermal stablility of hot and cold water supply incl all PP-R plain and brass threaded polypopylene random fittings fixed complete to wall or in ceiling or in floors etc all as specified and as directed. |
| 48 | Supply and Fix 25mm dia three layer PP-R polypropyline random copolymer concealed pipes SDR 7.4(PN-16) UV stablised and antimicroblal fusion welded having thermal stablility of hot and cold water supply incl all PP-R plain and brass threaded polypopylene random fittings fixed complete to wall or in ceiling or in floors etc all as specified and as directed. |
| 49 | Supply and Fix Rotational Moulded Polyethylene (HDPE) FDA grade materials water storage tanks,1000 litres capacity, three layered (Cylindrical vertical with closed top) screwed lid type conformingto IS 12701-1996 with manhole lid and suitable locking arrangement, making holes for inlet, outlet, washout and over flow pipes, hoisted and fixed in position as specified in SSR Part -I (2009) including dismantling and lowering of old tank complete all as specified and as directed. |
| 50 | Supply and fix in repairsBall brass valves, high pressure, with polyethene float and fly nut complete, screwed for GI pipe or brass ferrule of 20 mm bore complete all as specified and as directed. |
| 51 | Supply and fix in repairs Waste fittings, 32mmbore, brass, chromium plated for glazed ware sink or basin with long screwed shanks andfly nuts, flange end bedded in red lead cement and other end fixed with 32mm bore PVC low density polyethylene waste pipe complete all as specified and as directed. |
| 52 | Material and labour for cutting holes into or through brick walls built in cementmortar or lime mortar and stone walls built in lime mortar or walls of lime concrete exc 150 sq.cm but n.exc 400 sq.cm all as specified and as directed. |
| 53 | Supply and fix in repairs PTMT Grating doom 125 mm dia with waste hole of having minimum weight 40gms complete all as specified and as directed. |
| 54 | Supply and fix in repairs Vitreous china wash down water closet pan, pedestal pattern, floor mounted, colour white with all fittings including fixing bolts, flush pipe, Plastic water closet seat, white, closed pattern with flat bottom and cover with mild steel chromium plated or aluminised hinging device (excluding flushing cistern) and P/S trap including connections to drain(or outgoing pipe) complete all as specified and as directed. |
| 55 | Supply and fix in repairs Vitreous china Wash Hand Basin, white, flat back of size 550x400mm including cantilever brackets (CI/PVC), porcelain stopper, cutting for and pinning ends of brackets including waste fittings of brass chromium plated 32 mm and 32mm bore LDPE waste pipe (excluding taps, chain and plug) complete all as specified and as directed. |
| 56 | Supply and fix in repairs 15 mm bore Bib tap, cast copper alloy, chromium plated, fancy type with capstian head, crutch or butterfly handle confirming to IS screwed down, screwedfor iron pipes or for brass ferrule and fixed complete all as specified and as directed. |
| 57 | Supply and Fix in repairs 15mm bore dia Pillar taps, cast copper alloy, chromium plated, fancy type with capstan heads, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed. |
| 58 | Supply and Fix in repairs 15mm bore Angle valve/ Stop valves, cast copper alloy, fancy type Chromium plated, screwed down, high pressure, with crutch or butterfly handle, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts, screwed both ends for iron pipe or for unions fixed complete all as specified and as directed. |
| 59 | Supply and Fix in repairs 15mm diaconcealed stop cock, cast copper alloy, fancy type Chromium plated, screwed down, high pressure, with crutch or butterfly handle, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts, screwed both ends for iron pipe or for unions fixed complete all as specified and as directed. |
| 60 | Supply and fix in repairs 15 mm dia PVC connection pipes of 375 mm long with PTMT nut at both ends complete all as specified and as directed. |
| 61 | Supply and fix in repairsPVC low level flushing cistern, white,10 litre capacity, syphonic action type, white body with inlet, ball valve, float, handle,bracket, 32mm bore steel chromium plated flush pipe etcand connecting to WC and water pipe lines etc.,complete all as specified and as directed. |
| 62 | Supply and Fix Solid PVC door frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete all as per specification & drawing shown in MES schedule part II complete all as specified and as directed. |
| 63 | Supply and Fix Factory made PVC Solid panel door shutters30mm thick (style) solid PVC foam profile with homogenous fine cellular structure having smooth outer integralskin) consisting of frame made out of mild steel tubes for top and bottom rails, mild steelframe shall be covered with heat moulded plain colour PVC \"C\" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom railPaneling of plain colour PVC sheet to be fitted in the mild steel frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement supply and fixingin the frame at site as per specification and drawings shown in MES schedule part II complete all as specified and as directed. |
| 64 | Dismantling wall and ceilingboards (fibre, pulb, insulation etc) or insulation boards slabs/blankets any thickness including cover fillets all as specified and as directed. |
| 65 | Material and labour for Providing Gypsum board False ceiling using 8mm thick gyprex dew drop laminated gypsum ceiling tile of size 595 mmx 595 mm laminated with 0.07mm textured rigid poly Vinyl film white colour on the face side and 12 micron Metalized Polyester (MPL) film for diffusing heat & vapour on rear side with Square Edge (SE), Colour : White withLight Reflectance>80%, Humidity resistance up to RH 90% fixed with staples onpowder coated galvanized iron snap grid frame work of size 605 x 605mm using main and Cross \"T\" and angle sections (Main T Length: 3600 mm, Width 24mm, Height 38mm, Cross T Length :1200mm, Width: 24 mm, Height : 25mm and Cross T Length :600mm, Width: 24 mm, height 25mm) made out of 0.5mm thick PGI sheet, Class V, bent to shape requiredas in main member, secondary member, perimeter angle section including provn of G I wire suspender of size not less 4mm dia fixed to roof members with butterfly adjustable clip fixed to roof slabs at the rate of1200mm c/c both ways including taking down and refixing of electrical fittings etc., complete all asspecified and as directed .Note: The unit rate quoted shall be deemed to include the cost of taking down and refixing of the electrical fittings such as ceiling fan, light fittings etc., and refixing of the electrical fittings such as ceiling fan, light fittings etc, and keep in safe custody of same till refixing. |
| 66 | Material and Labour for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over including preparation of old treated surfaces complete all as specified and as directed. |
| 67 | Material and lbaour for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, etc., complete all as specified and as directed. |
| 68 | E/M WORKS |
| 69 | Taking down carefully existing point wiring with Aluminium/copper conductor on batten/surface conduit/casing caping point wiring (light/exhaust fan/socket/call bell/Power point) complete including fittings and fixtures such as switches, ceiling roses, shades, brackets, sockets, holders, light fittings, call bells etc., and removing the materials to store for taking credit including making good the disturbed surfaces of walls/floors/ceilings etc. complete all as specified and as directed. |
| 70 | Material and labour for point wiring complete with two runs of 1.5sqmm (for Phase and Neutral) PVC insulated unsheathed multistranded, copper conductor FRLSH cable of 1100V grade conforming to IS -694 drawn through and including new PVC casing capping of suitable size with accessories fixed on surfaces of wall/ ceiling/roof etc, including provision for modular flush box and provn of 1.5sqmm PVC insulated unsheathed copper conductor cable of green colour for earth continuity and connecting to common earth dolly etc., complete all as specified and as directed for:- Note :(a) The wiring shall be done in proper color coding using red, yellow, blue for phases, black for neutral and green for earth. (b) Modular metal flush boxes, Modular cover plate with frame shall be measured and paid separately. |
| 71 | One light point controlled by one switch |
| 72 | One fan point controlled by one switch |
| 73 | Material and labour for submain wiring/Wiring for Circuit complete with two runs of 2.50 Sqmm single core, multistranded, FRLS PVC insulated unsheathed cable 1100 volts grade with copper conductor, drawn through and including new PVC casing and caping of suitable size withaccessories fixed on surfaces of wall / floor and fixed on ceiling/roof etc,with one run of 2.50 Sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor and connecting to common earth dolly including taking down existing submain wiring any type complete all as specified and as directed. Note: Three runs of 2.50 Sqmm multistranded cable andone run of PVC casing and caping shall be considered as one unit length. |
| 74 | Material and labour for submain wiring/Wiring for Circuit complete with two runs of 1.50 Sqmm single core, multistranded, FRLS PVC insulated unsheathed cable 1100 volts grade with copper conductor, drawn through and including new PVC casing and caping of suitable size withaccessories fixed on surfaces of wall / floor and fixed on ceiling/roof etc,with one run of 1.50 Sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor and connecting to common earth dolly including taking down existing submain wiring any type complete all as specified and as directed. Note: Three runs of 1.50 Sqmm multistranded cable andone run of PVC casing and caping shall be considered as one unit length. |
| 75 | Supply and Fix Modular Switch, One module, Single Pole, one way,6 Amps, 230 Volts complete all as specified and as directed. |
| 76 | Supply and Fix Modular Switch 16Amps, One module, Single Pole, 230 Volts complete all as specified and as directed. |
| 77 | Supply and Fix Modular white cover plate with frame 3 module type complete all as specified and as directed. |
| 78 | Supply and Fix Modular metal flush box for 6 module type complete all as specified and as directed. |
| 79 | Supply and Fix Modular socket outlet, Two modules, Single Pole, 5 pin, 6 Amps, 230 Volts complete all as specified and as directed. |
| 80 | Supply and Fix Modular socket outlet, Two modules, Multi purpose, Single Pole with 3 pin 16 Amps and 3 pin 6 Amps, 230 Volts complete all as specified and as directed. |
| 81 | Supply and fix Ceiling rose, surface mount type, PVC/ Polycarbonate, with face bakelite 65 x 50mm three terminals, 230 Volts, AC Single phase complete all as specified and as directed. |
| 82 | Supply, fix, connecting and testing factory made, MCB distribution board, (MCB DB),SPN, 8 way, 240 Volts, Vertical type, double door having degree of protection IP 43, flush type made out of 1.2mm thick CRCA sheet metal, Phosphatised, duly powder coated and conforming to IS 8623 with 200 Amps rated copper bus bar with neutral link, earth bar and din rail etc., complete concealed and fixed flush to wall and making good the disturbed surfaces including, disconnecting electric connections, dismantling from position unserviceable DBs complete all as specified and as directed. Note: MCBs will be measured and paid separately. |
| 83 | Supply, fix, connecting and testing MCB Single Pole and Neutral (SPN), 5 to 30Amps, 230 volts, 50Hz of rupturing capacity 10kA, \"C\" curve type complete all as specified and as directed. |
| 84 | Supply, fix, connecting and testing MCB Single Pole (SP), 5 to 16Amps, 230 volts, 50Hz of rupturing capacity 10kA, \"C\" curve type complete all as specified and as directed. |
| 85 | Supply and fix Single Pole and Neutral sheet metal enclosure with a three pin and earth plug and socket complete with and including one Single pole MCB of capacity 30 Amps, B curve with breaking capacity 10kA complete concealed and fixed flush to wall and making good the disturbed surfaces all as specified and as directed. |
| 86 | Supply, fix, test and commissioning of 42Watts LED luminaire 2\"x2\"(600mm X 600mm),recess mounted type, 230V, AC with high performance LED with driver, holders & LED lamp in aluminium housing all as per Cat No.VENUSNEOHE2X2R18-42WLED830MODUGR19 of Havells or technocommercially equivalent of other specified makes including connecting up with driver with three core flexible copper conductor cable of suitable size from ceiling rose to fitting and taking down old fittings complete all as specified and as directed.Note: The new fittings shall bear the CA No. and Year written by Black synthetic enamel paint using stencils or by permanent marker pen and the unit quoted shall be deemed to include the cost of writing these details. |
| 87 | Supply and fix LED light fitting, 4 feet (1100x23x37) mm, 1 x 24 Watts , basic all purpose surface and wall mounted LED batten with aluminum housing & integrated electronic driver all as per Cat No.LUMILINEBS20WLED865SPCWH of Havells or techno-commercially equivalent of other specified makes fixed on surfaces of wall or ceiling with necessary hanging/fixing arrangements and connecting of flexible wire twin core from ceiling rose to fitting drawn through and including flexible conduit etc., including taking down old fitting complete all as specified and directed. Note: The new fittings shall bear the CA No. and Year written by Black synthetic enamel paint using stencils or by permanent marker pen and the unit quoted shall be deemed to include the cost of writing these details. |
| 88 | Supply, fix, test and commissioning of Energy efficient Ceiling fan with three blades including down rods, stepped type electronic regulator and other accessories, 230 V, 1200mm sweep, Minimum air delivery 210 CFM with service value 6.00 BEE, Five star rated with Brushless Direct Current motor (BLDC) fixed to roof/ceiling with suitable clamp including provisioning of flexible copper cord of size 23/0.0076 of required length from ceiling rose or connector to ceiling fan and taking down old unserviceable ceiling fans and to be deposited at AGE E/M store yard complete all as specified and as directed. |
| 89 | Supply, fix, test and commissioning of Exhaust fan of size 300mm sweep, metallic body, copper winding, 1200RPM, 230V AC single phase complete setwith metal blades, frames and louvers, connecting up including provn of threecore flexible copper wire of size 23/0.0076 from ceiling rose to exhaustfanetc., and taking down old unserviceable exhaust fans and to be deposited at AGE E/M store yard complete all as specified and as directed. |
| 90 | Supply, fix, test and commissioning of Air Circulator fans 230 volts, single phase, oscillating 450 mm sweep, suitable for wall mounting connecting up including provn of threecore flexible copper wire of size 23/0.0076 from ceiling rose to air ciculator fanetc., and taking down old unserviceableair ciculator fans and to be deposited at AGE E/M store yard complete all as specified and as directed. |
| 91 | Material and labour for Earthing complete with galvanized steel earth plate electrode of size 600mm x 600mm, 6.0mm thick burried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of plate not less than 1.5m below normal ground level, surrounded from all sides by 15 cm thick packed layer of charcoal dust and common salt (25 Kg bentonite), filling in alternate layer and earth plate connected to galvanized iron earth lead strip of size 32 x 6mm as earthing conductor by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No.3 ofMES Schedule (Part I) (2009) connected to earth testpoint/ main switch/ DB all as specified including testing on completion with and including 40mm bore medium grade GI protection pipe upto 7.5 meter longfor GI earth strip including PCC (1:3:6), type C-1 pit with 40mm thick precast RCC (1:2:4), type B -1 cover reinforced with 10mm dia MS bars @ 150 mm c/c both ways with lifting hooks made out of 12mm dia MS bars,MS frame made with 40 x 40 x 6mm Angle Iron, wire mesh funnel with watering pipe 20mm dia medium grade,as specified includingnecessary excavation and earth work in any type of soil etc., completeall as specified and as directed. |
| 92 | Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chasses or buried in groung or drawn in conduit / pipe or fixed to poles or any other indicated situation for loop earthing etc as required 32 X 6 mm galvanised iron strip including taking down old unserviceable one complete all as specified anddirected |
| 93 | Taking up or down steel tubing (GI or CI) of any size up to 150mm with all fittings, heads, shoes. Bends, swan-necks etc., including cleaningand to be deposited at AGE E/M store yard complete all as specified and as directed. |
