|
| 1 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum,includingremoving theexcavated material up to a distance of 50m. beyond thebuilding area and stacking and spreading as directed, dewatering, preparing the bedfor the foundation and necessary backfilling, ramming,watering including shoring andstrutting etc. complete. (Lift upto 0.00 to 1.50 m.) By Manual Means |
| 2 | Excavation for foundation in Hard rock by chiselling, wedging, line drilling, etc. including trimming and evelling the bed,removing the excavated material upto a distance of 50 metres beyond the building area stacking as directed, dewatering and back filling with available earth / murum watering, ramming etc.complete. (Liftupto1.5m). By Mechanical Means |
| 3 | Providing and laying Cast in situ / Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer /concrete Batch mix plant (Panmixer) etc.complete.With fine aggregate (Crushed sand VSI Grade) |
| 4 | ProvidingLateritestonemasonryincementmortar1:6in foundation and plinth including racking out joints when plastering is to be done/strikingjoints when no plastering is to be done watering and scaffolding. |
| 5 | Providing and laying Cast in situ/Ready Mix cement concrete M-15 oftrap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded orchamfered as per drawing or as directed including steel centering, plywood / steelformwork compacting ,roughening them if special finish is to be provided, finishinguneven and honeycombed surface and curing etc. complete.The Cement Mortar 1:3plaster is considered for rendering uneven and honeycombed surface only. Newly laidconcrete shall be covered by gunny bag, plastic, tar paulin etc.(Wooden centering will notbe allowed.) With fine aggregate (Crushed sand VSI Grade) |
| 6 | Filling in plinth and floors with approved excavated material in 15cm. to 20cm.Layers including watering and compacting etc. complete. |
| 7 | Providing dry/trap/ granite/ quartzite/ gneiss rubble stone soling 15 cmto 20 cmthick including hand packing and compacting etc. complete. |
| 8 | ProvidingLateritestonemasonryincementmortar1:6in Super structure includingracking out joints whenplastering is tobedone/strikingjointswhenno plasteringistobedone watering and scaffolding. |
| 9 | Providing and fixing frame with / without ventilator of size as specified with Country cutteak wood for doors and windows including chamfering, rounding, rebating,iron holdfastof size 300mm x 40mm x 5mm with oil painting, etc. complete |
| 10 | Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawing sapproved face veneers 3 mm thick on both faces or as directed ,all necessary beads,mouldings and lipping ,wrought ironholdfasts, chromium plated fixtures and fastenings, with brassmortise lock, chromiumplated handles on both sides, and finishing with French Polish etc. complete |
| 11 | Providing and fixing 30mm thick SOLID PANEL PVC INTERNAL DOOR SHUTTER consisting off rame made outof M.S. tubes o 19 gauge thickness and size of 40mm x 20 mm for stiles,top, lock and bottom rails.M.S.frame shall have acoat of steel primers of approved make and manufacture .M.S. frame shall be covered with 5mm thick heat molded PVC channel ofsize 30 x 100 mm formings tiles, and 5 mm thick,125 mm wide PVC sheets for topr ail, lock rail and bottom rail one ither side, and 15mm (5mm x 3)thick ,20 mm wide cross PVC sheet as gap insert for top rail and bottom rail. Paneling of 10 mm thick prelam PVC sheet to be fitted in the M.S.frame welded /sealed to the stiles and rails with 30 mm wide x 5 mm thick PVC sheet beading on either side, and joined together with solvent cemen adhesive etc.An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side ofthe C Channel using PVC solvent cement adhesive. including stainless steel fixtures and fastening Complete as per direction of Engineer in charge,manufacturers specification and drawing. |
| 12 | Providing and fixing in position. (as per I.S.1868 /1982) Aluminium sliding window oftwo tracks with rectangular pipe having overall dimension 63.50x 38.10 x 1.02 mm at weight 0.547 Kilogram / One Running Metre .and window frame bottom track section 61.85 x 31.75 x1.20 mm at weight 0.695 Kilogram / One Running Metre. Top and side track section 61.85 x 31.75 x1.30 mm at weight 0.659 Kilogram / One Running Metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram / One Running Metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram / One Running Metre .And handle section 40 x 18x 1.25 mm at weight 0.417 Kilogram / One Running Metre. and top section 40 x18 x1.25 mm at weight 0.417 Kilogram / Running metre. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete.With colour Anodising with box. |
| 13 | Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete. |
| 14 | Providing and laying Cast in situ / Ready Mix cement concrete M-20 of trap /granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs anddrawings or as directed including steel centering, formwork, cover blocks,laying/pumping, compactionand roughening the surface if special finish is to beprovided and curing etc.complete. (Excluding reinforcement and structural steel).with fully automatic micro process or based PLC with SCADA enabled reversible Drum Type mixer / concrete Batchmix plant (Panmixer) etc. complete.With fineaggregate (Crushed sand VSI Grade) |
| 15 | ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-20oftrap/granite/ quartzite/ gneiss metal for R.C.C.slabs andlandingsasper detaileddesigns anddrawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 16 | Providing and laying Cast in situ/Ready Mixcement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting androughening the surface ifspecial finish is to be provided and curing complete. (Excluding reinforcement and structural steel). withfullyautomaticmicroprocessorbasedPLCwithSCADA enabledreversibleDrum Typemixer/concreteBatchmixplant(Panmixer)etc.complete.Withfineaggregate (Crushed sand VSI Grade) |
| 17 | Providinginternalcementplaster12mm thickinsinglecoatincementmortar1:5without neeru finish to concrete or brick surfaces, in all position including scaffolding and curing etc. complete. |
| 18 | Providing andapplying Twocoats ofwall care Putty onplastered surface andCeiling and Walls to prepare surface even and smooth of approved make, etc complete. |
| 19 | Providing sand faced plaster externally in cement mortar using approved screened sand, inall positions including base coat of 15 mm thick in cement mortar 1:4 usingwater proofing compound at 1 Kilogram per cemen tbag curing the same for not less than 2days and keeping the surface of the base coat rough to receive the sand facedtreatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking outgrainsandcuringforfourteendays scaffolding etc.complete. |
| 20 | ProvidingsillsofpolishedKadappastone25mmto30mmthick,onabedof1:4cement mortarincludingcementfloat,filling jointswithslurry,curingpolishingandcleaningetc. complete. |
| 21 | Providing and laying matt finish ceramic tiles of having size 30 cm x 30 cm confirming to I.S.15622/2006 (group D II-A) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete. |
| 22 | Providing and laying ceramic tiles of having size 30 cm. x 30 cm. and confirming to corresponding I.S. for dado and skirting in required position with ready made adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. |
| 23 | Providing structural steel work in trusses, other similar trussed purlins and members withallbracing, gusset plates etc. as per detailed designs and drawings or asdirectedincluding cutting, fabricating, hoisting, erecting fixing in position, Making riveted /bolted/ welded connection and one coat of anti corrosive paintand over it 2 coats of oilpainting approved quality and shade etc. complete. |
| 24 | Providing and fixing in position TMT-FE -500 bar reinforcement of various diametersfor R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies,staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detaileddesigns, drawings andschedules. including cutting,bending,hooking the bars,bindingwith wires or tack welding and supporting as required complete |
| 25 | Providing and fixing of colour coated Zin caluminium (R)AZ 150 (min 150 gms / sq.mt. total one achside ) rofiled sheets for roofing.The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness (BMT) (0.5 mm TCT), Hi-strength steel with min.550 MP ayield strength ,metallic hot dip coated with Aluminium Zincalloy (55% aluminium m 43.4% zinc 1.6% silic on) with COLORBOND (R) steel quality super durable polyster paint coat (with inorganic pigment). The paint shall havea total coating thickness of nominal 35 um, comprising of nominal 25 umexterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950 1050 mm effective cover width and nominal25-30 mm deep ribs with subtle square fluting in the five panat nominal 180-250 mm center-to-center. The end rib shall be designed for anti-capacity groove. and return leg. The feed material should have coil manufacturer sproduct details markeda regular interval. including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screwetc. complete. (weigh o fprofile 4.52 Kilogram / OneSquare Metre) 900 mm girth ( Surface Width). |
| 26 | Providing and fixing mild steel grill work for windows, ventilators,etc.15 Kilogram / One Square Metre as per drawing including fixtures necessary welding and paintingwithonecoatof anticorrosive paint and two coats of oil painting complete. |
| 27 | Providing and fixing Orissa type white glazed earthenware 575 mm water closetpan including Strap with earthen ware footrests,cast iron soil and ventpipe upto outsidefaceof thewall 1:2:4 brickbat lime concrete bedding without flushing tankand itsaccessories etc. complete. |
| 28 | Providing and fixing white glazed earthen ware Wash Hand Basin of 45 cm x 30 cm size including cold water pillar tap / cold and hot water pillar tap brackets, rubber plugs andbrass chain, stop tap and necessary pipe connection including P.V.C. waste pipe andt rap up to the outside face of the wall. Making good the damaged surface, testing etc. complete. |
| 29 | Providing and fixing black kadappa stone as shelves 25mm. thick machine polished, extending the polish upto 20 cmwidth on lowerside, rounding corners, laying in position jointing with bedding cement mortar 1:4 pro portion curing etc etc. complete. |
| 30 | Providing, layingand fixingP.V.C.pipe of 110 mm.dia.with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation,trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. |
| 31 | Providingand fixing on walls / ceiling /floor 15 mm dia. CPVC pipe with necessary fittings remaking good the demolished portion etc .complete.Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. |
| 32 | Providing and fixing H.D.P container one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet,outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters |
| 33 | Providing and fixing 15 mm dia. Screw down bib /stop tap of brass including necessary socket union nut complete |
| 34 | Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90 cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W .pipes ,Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140 Kilogram with frame etc complete. |
| 35 | Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete. |
| 36 | Providing and applying two coats of water proof cement paint of approved manufactureand of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete. |
| 37 | Providing and fixing N.H . /S.H. Route Marker size 60 cm x 45 cm with one No.directionplate of size 30 cm x 25 cm prepared on 16 gauge M.S.sheet including painting with one coat of zinc cromate stoving primer and two coats each of white and green back groundand back side gray stovee namelled, bonded with cut out of red Retro reflective sheet Engineering grade,border/letters / numerals and arrow, coated with non pealable crystal clear protective transparent coat retaining 100 % reflection including one One Number of M.S.Angle iron post of size 50 x 50x 5 mm of 3.65 m. long in flated at bottom drilled on to pin one piece without joint painted with white and black bands of 30 cm. fixing board and post with 4 Nos .of high strength G.I. bolts and nuts of size 10 mm dia.and 20 mm long including all taxes, conveying, fixinging round with cement concrete 1:4:8 block of 60 cm x 60 cm x 75 cm size as directed by Engineer-in-charge etc.complete. Mild Steel Route Marker with Engineering Grade |
| 38 | Test reports - Basic test for cement |
