Tender For Biennial Contract For Repair-Maintenance Of Building And External Civil Infrastructure Work In Anupratap And Anutara Colonies At R.R. Site., Rawatbhata-Rajasthan

TDR : 47080138

Tender Notice
Corrigendum Details
BOQ

Expired

Rawatbhata , Rajasthan

Tender Brief : Corrigendum : Tender For Biennial Contract For Repair-Maintenance Of Building And External Civil Infrastructure Work In Anupratap And Anutara Colonies At R.R. Site.

Document Fees
Refer document

EMD
₹ 1196371.0 /-

Tender Value
₹ 5.98 Crore /-

Submission Date
28-01-2025

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Sr No	Corrigendum Date	Corrigendum	Type	New Submission Date
1	23-01-2025	Bid Auto Extn Corrigendum	Bid Auto Extn Corrigendum	28-01-2025

Name of Work: Biennial Contract for Repair-Maintenance of Building and External Civil Infrastructure work in Anupratap and Anutara colonies at R.R. Site.

Sl. No.	Item Description
1	Surface Dressing of Ground including removing vegetations and / or inequalities not exceeding 15 cms. Deep and disposal of rubbish upto lead of 50 m and lift upto 1.5 m for all kind of soil. as per specifications and direction of EIC.
2	Earthwork in Excavation in all types of ground substrata consisting of hard rock / fragmented rock / soft rock / ordinary soils / filled up ground / murrum requiring use of rock breaker, drilling, chiseling with mechanical / manual means etc.up to a depth of 1.5 m from the original ground level and dewatering if required for foundation of walls, columns, platforms etc. including backfilling with selected excavated materials in plinth and foundation trenches in layers not exceeding 200 mm thick, watering ramming etc. complete and disposing off the surplus materials to a maximum radially measured lead of 1.0 KM. as per drawings, design , safety and specifications and directions of the Engineer.
3	Earthwork in Surface Excavation not exceeding 30cm in depth but exceeding 1.5 m in width as well as 10 Sqm on plan including disposal of excavated earth up to 1.0 KM and lift up to 1.5 m, disposed soil to be leveled and neatly dressed etc. completed and disposing off the surplus materials to a maximum lead of 1.0 KM. radius as per drawings,specifications and as directed by the Engineer.
4	Providing and Operation ofHydraulic Excavator/ J.C.B. of 1 cum bucketfor clearing of rubbish, garbage, debris, Excavation work etc including cost of services of operating staff, Cost of lubricating oil, Diesal / petrol/kerosene oil, other consumables for running the machine all complete as directed by the Engineer-in-charge.
5	Supply and operation of 8 to 10 Tonne road roller with driver and two nos unskilled worker for ground levelling and true grade line (Uniform Surface etc) including all consumables i.e. diesel oil for lubricants etc all complete and as per Direction of the Engineer-in-charge {Working times 8 Hrs per day}.
6	Supplying at site of Good Earth excavated and brought from outside (borrow pits / stock piles) free from weeds, roots, rubbles and other foreign material including royalty and carriage and filling in trenches, plinth and sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layers by ramming and watering and lift upto 1.5m etc. complete (only consolidated fill shall be paid).
7	Providing and laying 150 mm thick Stone Soling under floors properly hand packed, filling interstices with spalls, gravels and inert fine material and consolidating to required gradient and camber, spreading, wateringetc. complete as per drawings, specifications and direction of Engineer.
8	Providing and laying 200 mm thick Stone Soling using quarry stone properly hand packed, filling interstices with spells, gravels and inert fine material and consolidating with power road roller to required gradient and camber including spreading, watering and rolling binding material etc. complete as per drawings, specifications and direction of Engineer.
9	Providing and laying in position Plain Cement Concrete (PCC) of 1:3:6(1 Cement: 3 coarse Sand : 6 Graded Stone aggregate 20 mm nominal size) -at all level , transporting of concrete to site, laying, consolidation, finishing, curing etc. all complete excluding cost of centering & shuttering, as per direction of Engineer-in-charge.
10	Providing and laying in position cement concrete of 1:2:4(1 Cement: 2 coarse Sand : 4 Graded Stone aggregate 20 mm nominal size) - at all level, transporting of concrete to site, laying, consolidation, finishing, curing etc. all complete excluding cost of centering & shuttering, as per direction of Engineer-in-charge.
11	Providing and laying in position Cement Concrete of 1:1.5:3(1 Cement: 1.5 coarse Sand : 3 Graded Stone aggregate 20 mm nominal size) - at all level, transporting of concrete to site, laying, consolidation, finishing, curing etc. all complete excluding cost of centering & shuttering, as per direction of Engineer-in-charge.
12	Providing and laying cement concrete of 1:2:4 ( 1 Cement : 2 Coarse sand : 4 graded stone aggregate 20 mm nominal size) in approach pavment to garages etc. in suitable size of pannels including consolidation with needle and vibro compactor equipment and finishing with power floater and trowelled to desired finish & finally giving required broom finish with suitable means, sawing the contraction joint with machnical saw at specified spacing, the width of sawed groove shall be 6mm thick and depth shall be 1/4th of thickness of pavment and sawing operation should be carried out as soon as the concrete is ready to accept the saw cut without trowelling. The joint should be field with approved bitumastic sealant including transporting of concrete to site of laying including cost of centering and shuttering, finishing, curing etc. all Complete with all material and labour as per specifications and direction of Engineer-in-charge. (Qty of water used per bag of cement shall not be more than 22.5 ltr. cement admixture shall be added if required for desired workabilty)
13	Providing and Application of IRONITE NO.3 powder (Metallic Dry shake natural cement colour) @ 6 Kgs/m2 sprinkled over green concrete with1/3rd of the dry shake to be sprinkled in First pass and floated with Power float, remaining 2/3rd of dry shake to be sprinkled in next pass and the floor laid floated & trowelled to acquire desired finish.
14	Providing and laying in position machine batched, machine mixed and machine vibrated Design Mix Cement Concrete of all grades grade for Reinforced cement concrete or other works using 20mm size stone aggregates including transporting of concrete to site for laying but excluding the cost of centering, shuttering and reinforcement, including cost of finishing, compaction, curing, approved chemical admixtures conforming to IS 9103 in recommended proportions for achieving slump not less than 120mm and water/cement ratio not more than 0.42 at all level & for all sections as per drawings, specifications & direction of Engineer-in-charge. Use of concrete retarding agent / accelerator conforming to IS 9103 shall also be done if situation demands so. Rates should be based on using 350 kg of OPC 43 grade cement per Cum of concrete.
15	Supplying Water Proofing Material Dr. Fixit Pidi proof LW plus / Complast X-421 1C of fosroc / STP no 1 of STP Ltd. as approved in NPCIL store & issuing the same from NPCIL store as per site requirement for mixing in cement plaster work / concrete work in proportion as recommended by the manufacturers etc. complete as per direction of Engineer-in-charge.
16	Providing and laying Thermo-Mechanically Treated Reinforcement Bars of grade as specified in drawings/specifications and as directed by engineer conforming to IS : 1786 latest revision or the latest relevant code for RCC work including straightening, cutting, bending, placing in position and binding with 20 gauge annealed binding wire and cement mortar cover block of all size in C.M. 1:2 MIX etc. all complete- as per drawings, specifications & direction of engineer in charge.
17	Transporting of Re-steel from NPCIL Phase-1 store to site and laying Reinforcement bars for R.C.C. work including, cleaning straightening, cutting, bending, placing in position and binding with 20 gauge annealed binding wire and cement mortar cover block of 1:2 MIX etc. all complete- as per drawings, specifications & direction of engineer in charge.
18	Providing Form Work of battened frame with sheathing having plywood lining / MS angle frame with sheathing of MS plate lining so as to give fair finish including centering shuttering strutting and propping etc. height of propping and centering below supporting floor not exceeding 3.5 meters to ceilings and removal of same for foundation, footings, columns, wall, Suspended floors, stairs, landings, balconies, lintels, beams, plinth beams, girders, cantilevers and access platform etc. complete at all level of floors / roof as per specifications and direction of Engineer in charge.
19	Providing & laying Random Rubble Masonry with hard stone in foundation and plinth level of building & upto 3.00 Mtr. height from NGL for boundary/compound wall with Cement mortar 1:6 (1 Cement :6 Coarse sand) including cost of labour, materials, curing , raking out the joints , finishing, scaffoldings etc. all complete as per specifications and direction of Engineer in charge.
20	Providing and laying Fly-ash Brick Masonry class designation- 75 ( IS-12894 -latest revision) in cement mortar 1:6 ( 1 cement : 6 coarse sand) upto plinth level including cost of labour, materials, curing, finishing, scaffoldings etc. all complete as per drawings, specifications and direction of Engineer in charge.
21	Providing and laying Fly-ash Brick Masonry using Fly-ash building bricks of class designation- 75 ( IS-12894 -latest revision ) in cement mortar 1:6 ( 1 cement : 6 coarse sand) in superstructure above plinth level up to floor five level as per specifications and direction of Engineer including cost of labour, materials, curing, finishing, scaffoldings etc. all complete as per drawings, specifications and direction of Engineer in charge.
22	Providing and laying Half Brick Masonry using fly ash bricks of class designation-75 ( IS-12894 -latest revision ) in cement mortar 1:4 ( 1 cement : 4 coarse sand) with RCC 1:2:4 ( 1 Cement : 2 Coarse sand : 4 graded stone aggregate 20 mm nominal size) stiffeners 75 mm thick horizontally @ 1000mm c/c excluding cost of laying reinforcement but including cost of RCC stiffeners in superstructure above plinth level upto floor five level including cost of labour,materials, curing, finishing, scaffoldings, shuttering etc. all complete as per specifications and direction of Engineer in charge. Note - Reinforcement bars to be paid in relevant item.
23	Providing and laying 6mm thick Cement Plaster (1 cement : 3 sand) in single coat on RCC ceiling face & parapet coping etc. for interior plastering at all levels including necessary grooves at the junction of RCC and brickwork arises, internal rounded angle, chamfers and / or rounded angles not exceeding 80 mm in girth including scafolding, finishing, curing etc all complete as per specifications and direction of engineer.
24	Providing and laying 15mm thick Cement Plaster 1:4 (1 cement : 4 fine sand) in single coat on either side of single or half brick wall for interior plastering at all levels using galvanized M.S. wire of I.S. gauge designation 26 s.w.g. chicken mesh over junctions of brick work, beams and column as required including necessary grooves at the junction of RCC and brick work, arises, internal rounded angles, chamfers and / or rounded angles not exceeding 80mm in girth including scafolding, finishing, curing etc all completeas per specifications and direction of engineer.
25	Providing and laying 18 mm thick Cement Plaster in two coats under layer 12 mm thick cement plaster 1:4(1 cement : 4 fine sand) finished with a top layer 6mm thick cement plaster 1:4 (1 cement : 4 fine sand) on either side of single or half brick masonry walls for exterior plastering at all height and using galvanized M.S. wire of I.S. gauge designation 26 S.W.G. chicken mesh over junctions of brick work, beams and column as required including necessary grooves at the junction of RCC and brick work, arises, internal rounded angles, chamfers and / or rounded angles not exceeding 80mm in girth including scafolding, finishing, curing etc all complete as per specifications and direction of engineer.
26	Providing and laying 20 mm thick Cement Plaster of mix :- 1:4 (1 cement : 4 fine sand ) including finishing, curing, scaffoldings etc. complete at all height as per direction of Engineer-in-charge.
27	Neat Cement Punning including finishing, curing, etc. including cost of material and labour complete as per direction of Engineer-in-charge.
28	Providing and laying 50 mm thick CC 1:2:4 for COPING using 12mm down aggregates, finishing the exposed surfaces with cement mortar 1 : 4 including fixing of broken glass pieces on top of coping wherever required, finishing, formwork, curing, scaffoldings etc. complete as per direction of Engineer-in-charge.
29	Pointing on Stone Work with cement mortar 1:3 (1 cement :3 fine sand): Raised and cut pointing including finishing, curing, scaffoldings etc. complete at all height as per direction of Engineer-in-charge.
30	Providing & laying garage and Stilt Flooring Cement Concrete 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate of approved size) in 50mm average thickness laid in suitable panels including Supply & Fixing of 40 mm x 4 mm glass strip in specified grid pattern in line and level including cost of shuttering, compaction, finishing and curing etc. all complete as per drawings, specifications and direction of engineer in charge.
31	Providing and laying Kerb Stone of M-25 grade at or near ground level required size factory made cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per specification & direction of Engineer-in-charge. (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
32	Providing and laying Precast Cement ConcreteInterlocking Pavers Block M-35 grade and 60mm thick factory madeconforming to IS 15658 : 2006 made by block making machine with strong vibratory compaction and of approved shape pattern laid in required slope over and including 50mm thick compacted bed of fine sand, filling the joints with fine sand etc. all complete as per the specification & direction of Engineer – in – charge.
33	Providing and laying Coloured Precast Cement ConcreteInterlocking Pavers Block M-35 grade and 80mm thick factory madeconfirming to IS 15658 : 2006 made by block making machine with strong vibratory compaction and of approved colour, size and shape pattern laid in required slope over and including 50mm thick compacted bed of fine sand, filling the joints with fine sand etc. all complete as per the specification & direction of Engineer – in – charge.
34	Providing and fixing 10mm thick ENDURA TILES of approved brand, size and shade laid over a base of 20 mm av. thick cement mortar 1:4 (1 cement : 4 coarse sand) including ordinary Portland and polymer based cement slurry including grouting the joints with BAL ENDURA grouts (the joints between the tiles shall be 3mm to 5mm wide and 6mm to 8mm deep as per regular tiling procedure) and curing etc. all complete as per specifications and direction of engineer in charge.
35	Chequerred Precast Cement Concrete Tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Dark shade pigment using ordinary cement including finishing & curing work at all level etc. complete as per direction of engineer in charge.
36	Providing and fixing up to floor five level RCC Precast Structural Elements / Membersof size and thicknes as required and as specify by EIC in lintel beam, slab, trench / drain covers etc.in cement concrete 1:1.5:3 mix (1 cement :1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) with maximum water content of 22.5 ltr. per bag of cement and additional slump generated by adding suitable quality cement admixture including fixing M.S. angle frame of required size all around the precast member to protect the edges wherever required,including hoisting and setting in position with cement mortar 1:3 (1 Cement: 3 coarse sand), Cost of required centering, shuttering including finishing smooth exposed surfaces, curing etc. all complete. at all level as per specification and direction of Engineer-in-charge. Note : Providing fabrication and fixing reinforcement and M.S. angle frame shall be paid in relavantitem
37	Providing & fixing Precast Cement Concrete Jali 1:2:4 (1 Cement :2 Coarse sand:4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including centering and shuttering, compaction, roughening cleaning and finishing in cement mortar 1:3 (1 Cement :3 fine sand) etc. complete excluding plastering of the jambs, sills and soffits. 50 mm thick including transporting to site as per specification & direction of Engineer-in-charge
38	Providing & fixing 18mm to 22mm thick both face polished Kota Stone Shelves fixed in walls in cement mortar 1:3 (1 cement : 3 coarse sand) including cutting chases in masonry/plaster, finishing, making good the same, full moulding of exposed edges at all level complete as per specification and as directed by engineer in charge.
39	Providing and fixing polished Kota Stone Slab Flooring 18 to 22 mm thick in flooring, tread of steps, landing, laid over 20 mm (average) thick base of cement mortar 1:4 (1 Cement: 4 sand): and jointed with white cement slurry mixed with pigment to match the shade of the slab, including edge molding and cutting three nos. grooves neatly in longitudinal direction of steps for antiskid purpose, rubbing and polishing complete, including cutting of slot (without edge splitting) using mechanical means for receiving the handrail supports including finishing & curing work at all level etc. complete (size of kota stone shall cover full length & width of stair case treads as shown in drawings) as per specification & direction of Engineer-in-charge.
40	Providing and fixing polished Kota Stone Slab Flooring 18 to 22 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 Cement 3: sand) and jointed with white cement slurry mixed with pigment to match the shade of the slab, rubbing and polishing complete, including finishing & curing work at all level etc. complete as per specification & direction of Engineer-in-charge. (size of kota stone shall cover full length & width of stair case risers as shown in drawings)
41	Providing and fixing Premium Quality Mat Finished Ceramic Floor Tiles of size 300x300mm and 6mm thickness conforming to IS: 15622 (latest revision) ofH&R JOHNSON (pure mat finish Rustic /Lenox series) / KAJARIA (Digital floor -stain mat plain & printed mat finish) / NITCO (Crust digital floor tiles premium) as approved in required shade, laid on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 sand) including grouting the joints using special tiles grout FEVIMAT - TG of Pidilite or similar approved make complete including covering of floor tiles with 3mm th. PVC tile protection sheet over it to protect the tile from painting stains and scratches during various finishing activities including finishing and curing work at all level etc. all complete as per specification & direction of Engineer in charge.
42	Providing and fixing Premium Quality Special Printed Ceramic Glazed Wall Tiles of size450mmx300mm and 6mm thickness of approved shade in base and highlighter conforming to IS: 15622 (latest revision) ofH&R JOHNSON wall tiles (DIGITAL PRINTED SERIES) / KAJARIA (Digital & power line) / NITCO (Cosmos digital wall tiles)as approved in skirting and dado over 12mm thick bed of cement mortar 1:3(1 cement :3sand) including grouting the joints using special tiles grout FEVIMAT - TG of Pidilite or similar approved make complete including protecting the tiles from painting stains and scratches during various finishing activities including finishing and curing work at all level etc. all complete as per specification & direction of Engineer in charge.
43	Providing and laying Premium Quality Polished Vitrified Tiles of size 600mm x 1200mm or as required of approved shade and conforming to IS: 15622 (latest revision) of H&R JOHNSON (Double charge Magic bush Series) /KAJARIA(Double charge K-62 & K-63 series)/ NITCO (Double charge Nano vitrified premium) as approved, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 sand) in floors and skirting including grouting the joints using special tile grout FEVIMATE-TG of Pidilite or similar approved makeincluding covering of tiles with 3mm th. PVC tile protection sheet over it for protection of tiles from paint stains, scratch during various finishing activities including finishing and curing at all levels etc. all complete as per specification and direction of Engineer-in-charge.
44	Providing and laying Premium Quality Polished Vitrified Tiles of size 600mm x 600mmof approved shade and conforming to IS: 15622 (latest revision) of H&R JOHNSON (pure mat finish GVT series) / KAJARIA (Desert series - mat finish)/ NITCO (Architect series - mat finish)as approved, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4sand) in floors and skirting including grouting the joints using special tile grout FEVIMATE-TG of Pidilite or similar approved make complete: including covering of tiles with 3mm th. PVC tile protection sheet over it for protection of tiles from paint stains, scratch during various finishing activities including finishing and curing at all levels etc. all complete as per specification and direction of Engineer-in-charge.
45	Providing and laying Terrazzo Tiles 22mm thick with graded marble chips of size up to 6mm in floors jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete on 20 mm thick bed of cement mortar 1:4 (1Cemnt:4 Coarse sand): Light shade using white cement including finishing & curing work at all level etc. complete as per direction of Engineer-in-charge.
46	Providing and fixing Polyviny Chloride Sheet 3 MM thickness / P.V.C. Tile (of other woven fabric flooring / using rubber base adhesives including rolling with light wooden roller complete (3.0 mm thick sheet) as per specification & direction of EIC.
47	Providing and fixing 14 to 16 mm thick Marble Stone gang saw cut, mirror polished, premoulded and prepolished, machine cuton wall tops, sides,facias and similar locations of required size (all size), approved shade, colour and texture over 12 mm thick (average) base cement mortar 1:3 (1 cement : 3 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges wherever required to give high gloss finish etc. complete at all levels. (Base rate of marble stone shall not be less than 600/- per Sqm)
48	Providing and fixing in full width & length 15mm to 18mm thick Granite Black or any other approved shade/ colour / texture gang saw cut mirror polished, premoulded, machine cut for kitchen platforms, fascias and similar locations laid over 20 mm thick base cement mortar 1:4 (1 Cement :4 sand ) with joints treated with white cement mixed with matching pigment, epoxy touch ups, including rubbing, curing, edge moulding and polishing to edge to give high gloss finish etc. complete at all levels: Area of slab over 0.50 Sqm. including finishing & curing work at all level etc. complete as per drawing, specifications and direction of Engineer-in-charge.(Base rate of granite shall not be less than Rs. 1800 / Sqm) Note:- Sample of granite shall be approved by EIC before bulk purchase.
49	Providing and fixing 15 to 18mm thick Granite Black or any other approved shade / colour / texture gang saw cut mirror polished, premoulded, machine cut for wash basincounter including cuttingopening forwash basin making half round edge moulding in granite stone for counter etc. all completeof required sizelaid over 20 mm thick base cement mortar 1:4 (1 Cement :4 sand ) with joints treated with white cement mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edge to give high gloss finish etc. complete at all levels:as per drawing, specifications and direction of Engineer-in-charge. (Base rate of granite shall not be less than Rs. 1800 / Sqm)Note:- Sample of granite shall be approved by EIC before bulk purchase.
50	Providing and fixing factory made 30 mm thick Flush door shutter single / double leaf conforming to IS ; 2202(part-1) of make KITPLY / GREENLAM / CENTURYas approved by EIC, with Block board core & frame of well seasioned hard wood, cross band made from BWP grade veneers andcommercial BWP grade face veneers on both sides of shutter including providing and fixing 2nd class teak wood leaping of suitable size and shape all around the edges including approved brand stainless steel fixtures like Tower bolt (size-250mmx12mm), Tadi latch (300mmx14mm), Aldrop (300mmX16mm), Handles plate type - 100mm size (size shall be confirming to IS:208) - 02 nos, Magnetic Cather etc. painting two coats of synthetic enamel paint over a coat of primer of approved brand etc. complete as per drawings, specifications and direction of Engineer. Note - actual area of shutter will be paid.
51	Providing and fixing factory made 35 mm thick both side laminated flush door shutters single leaf conforming to IS ; 2202(part-1) of make KITPLY/ GREENLAM / CENTURYas approved by EIC with Block board core & frame of well seasoned hard wood, cross band made from BWP grade veneers andcommercial BWP grade face veneers on both sides of shutter including providing and fixing 2nd class teak wood leaping of suitable size and shape all around the edges including supply and fixing of approved brand stainless steel fixtures like Tower bolt (size-250mm long rod size 12mm), Tadi latch (300mm long rod size 14mm), Aldrop (300X16mm), Handles plate type - 100mm size (size shall be confirming to IS:208) - 02 nos, Magnetic Cather etc. with approved quality judas eye, safety chain etc. complete as per drawings, specifications and direction of Engineer. (Door skin shall be 1.0 mm thick on front face and 0.8mm thick on back face with the provision of edge bending of decorative high pressure laminated sheet of plain/wood grain in gloss/ matt/ suede finish with high density protective surface layer of make KITPLY / GREENLAM / CENTURYas approved by EIC).Note - actual area of shutter will be paid.
52	Providing and fixing 30mm thick factory made pre-laminated PVC Door Shutter of approved make and design consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make. M.S. frame covered with 5 mm thick heat molded PVC \"C\" channel of size 30 mm thickness, 95 mm width out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 115 mm wide PVC sheet out of which 95 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 140 mm wide PVC sheet out of which 100 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the \"C\" Channel using PVC solvent adhesive etc.including all SS fitting and fixtures suchas 1 nos Tadi latch 200mm longx12mm rod size, 2 nos. tower bolt 250mm x 12mm, 2 nos. plat type handles - 100mm size (size shall be confirming to IS:208) of approved brand complete as per drawing, specification & direction of Engineer-in-charge.
53	Supplying and fixing Rolling Shutters of approved make, made of required size M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5cm long wire spring grade No. 2 and M.S. top cover of required thickness for rolling shutters.80mmx0.90mm M.S. laths with 0.90mm thick top cover all complete as per drawings , specifications & direction of engineer in charge.
54	Providing and fixing in position Collapsible Steel Shutter with Vertical M.S. channels 20X10X2 mm and bracket with flat iron diagonals 20X5 mm size with top and bottam rails of T-iron 40X40X6 mm with 40mm dia steel pulleys / ball bearing with bolt,nuts , locking arrangments inside and outside stoppers, handles etc. and applying a priming coat of approved steel primer all as per standard design ,all complete as per drawings, specifications & direction of engineer in charge.
55	Providing and fixing double leaf cupboard shutters with frame fabricated from 18-19mm thick BWP grade block board conforming to IS:1659,Kit board gold / Greenlam / Century make with laminate of approved make (Kit ply/ Greenlam / Century) and shade on both faces (1 mm thk. laminate on front face and 0.8 mm thk. on back face with the provision of edge bending) including IInd class teak wood lipping of 19mm wide x 6 mm thick with necessary S.S screws and bright finished heavy duty stainless steel fixtures of approved brand (two nos handles plate type - 100mm size (size shall be confirming to IS:208), two nos. magnets, two nos. tower bolt of 100mmx10mm rod size, one nos. hasps and steples etc.), Stainless Steel Butt hinges / S.S. piano hinges etc. as approved all complete as per drawings, specifications and directions of Engineer-in-charge with Note - actual area of shutter with frame will be paid.
56	Providing and fixing 30mm thickIInd class M.P. teakwood G.I. wiremesh shutters using wire mesh of averageaperture 1.4mm with wire of dia 24 gauge for door / window / vantilators includingtwo coats of approved synthetic enamel paint over acoat of approved wood primer and also including ISI marked bright finished heavy duty M.S butt hinges with necessary screws and fixtures likehavey duty Aluminium Tower bolts (size-200mm long), Handles (125mm long) etc:All as per specifications and direction of Engineer-in-charge. Fabrication details of styles, rails, teakwood, beading shall be as per standard I.S. specifications.Note - actual area of shutter will be paid.
57	Providing and fixing 30mm thick second class M.P. teak wood glazed shutters for windows / vantilators using 4 mm thick FLOAT glass panes including two coats of approved synthetic enamel paint over acoat of approved wood primer and also including bright finished ISI marked heavy duty M.S butt hinges with necessary screws and fixtures likeheavy duty Aluminium Tower bolt (size-200mm long), Handles (125mm long) etc: as per specification and directions of Engnieer-in-charge fabricating details of styles, rails, teakwood, beading shall be as per standard I.S. specification Note - actual area of shutter will be paid.
58	Providing and fixing wooden moulded corner beading of triangular shape to the junction of panelling etc. with iron screws, plugs etc. complete 2nd class teak wood: 50x50mm(base and height) as per drawings, specifications and directions of Engineer-in-charge.
59	Providing & Fixing of2nd class teak wood lipping/moulded beading or taj beading of size 18x5 mm fixed with wooden adhesive of approved quality and screws/ nalils on the edges of the pre-laminated particle board etc. complete as per drawings, specifications and directions of Engineer-in-charge.
60	Providing and fixing colour anodized aluminium work for doors, windows, ventilators and partitions as per thematerial,fabrication and dimensional specifications/ requirement of IS: 1948 from aluminum alloy extruded sections, tubular / appropriate Z and or other sections of approved make conforming to grade HE9-WP of IS : 733 and HV9-WP of IS: 1285, fixed with raw plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with requiredneoprene felt and silicon whether sealant etc. Aluminium sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling. C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. : For shutters of doors, windows & ventilators including providing and fixing approved ss hinges/ pivots/ rollers suitable for sliding / openable window and providing and fixing approved fittings i.e. two handle with locking arrangement for each sliding window shutter and one handle as well as two tower bolt for each glass / jali shutter with provisions of one gate hook for each glass shutter for openable window wherever required as approved includingthe cost of neoprene gasket all complete: colored anodized coated aluminium (thickness of anodized coating 15 micron). The finished arrangement shall be fully water tight. Note : 1. Payment of Glazing / SS wire mesh to be paidin relevant item in line with their specifications.2. Cost of SS hinges / pivot / rollers are to be included in the quoted rate and no payment shall be made for providing and fixing the same.
61	Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with neoprene gasket and silicon sealant etc. complete as per the architectural drawings and the directions of engineer-in-charge. With float glass panes of 4.0 mm thickness (Cost of aluminium snap beading shall be included in basic item)
62	Providing and fixing pre-fabricated deco grill or equivalent expanded Aluminum grills made of anodized aluminum as per design and drawing having members section of size 7.5 mm X 6.0 mm and opening of size 102 mm X 99 mm fixed to staircase opening with aluminum frame with required screws, Y & H aluminum section as per drawing at the ends and middle joints at all heights etc. complete as per specification & directed by the engineer.
63	Providing and fixing M.S. grills of required pattern in frames of windows, ventilators, balconies etc. with M.S.flats, square or round bars ets. all complete including applying two coat of approved quality synthetic enamel paint over a priming coat of approved steel primer: Fixed to steel/ aluminium window by welding/riveted or bolted all complete as per standard design, drawing, specification and direction of engineer in charge. MS grill design & drawing shall be prepared & submitted by the contracting agency for the approval of EIC.
64	Structural steel work riveted, bolted or welded in built up sections, trusses and frame work M.S. door & fix ventilators, anchors etc made out M.S. angle, channels, flats, rods, bars, weld mesh, M.S. pipe etc including supplying, cutting, hoisting, fixing in position and applying two coat of approved quality synthetic enamel paint over a priming coat of approved steel primer all complete as per standard design, including the cost of all material and labour complete- as per drawings , specifications & direction of engineer in charge.
65	Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
66	Providing and fixing of pelmets solid PVC sheet made out of 18 mm thick (one side laminated other side balancing white with 600 kg /Cum density) and 120 mm wide approved brand & shade including nickle plated M.S. Pipe 20 mm dia. (heavy type) curtain rod with nickel plated brackets, including fixing with 25x3 mm M.S. Flat 10 cm long fixed to pelmet on both inner side of pelmet and rawl plugs 75 mm long etc. all complete in all respect as per specification & direction of engineer-in-chargeNote- only length of pelmet (No over change shall be paid)
67	Providing and fixing curtains velvet cloth or other approved curtaions including 25mm dia SS rods with decorative end sockets. Items to be completed in all respact for use along with all fittings. All the material to be approved by \"EIC\" before fixing etc.
68	Providing and fixing venetian blinds of make ALASKA / VISTA / NEWTECH of approved shade with all standard fixing arrangments including cost of drilling holes, fixing screws, handling etc. all complete as directed by engineer.
69	Providing & Applying Acrylic Polymer chemical for cracks for interiors as Directed by the Engineer-in-Charge.
70	Providing and applying Two coats ofSBR Latex mixed with cement in specified proportion (cement mixed with waterproofing material such as PIDICRETE URP of Dr. FIXIT / Hydro proof extra of fosroc / Shalicrete-R of STP Ltd./ Tapcrete P-151 of Cico technologies conforming to relevant IS as approved by engineer in charge in the proportion as recommended by manufacturersforming 300 - 400 microns thick layer in 2 coats of application on treated surface, RCC sunken slab or where ever required including hacking/cleaning and washing the surface etc. all complete as per specification and direction of engineer in charge. Note:- The whole treated area shall be flooded with water for a minimum period of 4 days forwater tightness test.
71	Providing and laying integral cement based water proofing treatment including preparation of surface by hacking, cleaning and washing the roof top as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) Applying two coat ofwaterproof cement slurry (cement mixed with waterproofing material such as PIDICRETE URP of Dr. FIXIT / Hydro proof extra of fosroc / Shalicrete-R of STP Ltd. / Tapcrete P-151 of Cico technologies confirming to relevant IS as approved by engineer in charge in the proportion as recommended by manufacturer)on the prepare surface over the RCC slab including adjoining walls up to 300mm height. b) Laying machine mixed brick bats with mortar in proper slope (1 in 40 to 1 in 60) using broken bricks/brick bats 25 mm to 100mm size with 50% of cement mortar 1: 4 (1 cement : 4 coarse sand) admixed with approved water proofing compound in the proportion as recommended by manufacturer (Cico No.1 of Cico technologies or similar approved product of Pidilite / Fosroc / STP Ltd. as approved by engineer in charge) conforming to relevant ISover 20 mm thick layer of cement mortar of mix 1: 4 (1 cement : 4 coarse sand) admixed withapproved waterproofing compoundin the proportion as recommended by manufacturer (Cico No.1 of Cico technologies or other similar approved product of Pidilite / Fosroc / STP Ltd. as approved by engineer in charge) conforming to relevant IS to required slope and treating similarly the adjoining walls up to 300mm height including rounding of junction of walls and slabs. c) After two Days of proper curing applying a coat of cement slurry using 2.75 kg/sqm of cement admixed with approved water proofing compound in the proportion as recommended by manufacturer (Cico No.1 of Cico technologies or similar approved product of Pidilite / Fosroc / STP Ltd. as approved by engineer in charge) conforming to relevant IS.d) Finishing the entire surface (horizontal as well as vertical) with 25mm thick jointless cement concrete of mix 1:1.5:3 (1 cement : 1.5 course sand : 3. 10mm down aggregate) admixedwith approved water proofing compound in the proportion as recommended by manufacturer (Cico No.1 of Cico technologies or similar approved product of Pidilite / Fosroc / STP Ltd. as approved by engineer in charge) conforming to relevant IS including finaly finishing the surface with trowel with neat cement slurry and making pettern of size100x100mm Sqare 3mm deep.e) Thewholeterrace sofinished shallbe floodedwith waterforminimumperiodof two week for curingand forfinaltest. Allaboveoperations to bedone in order and asdirectedandspecifiedby the Engineer – In charge. :Theaverage thicknessof brick bat coba shall be 120mm and minimum thickness at khurra as 65mm. before laying 25mm thk. CC (1:1.5:3) (Payment shall bemade for plan area of roof treated).
72	Providing and laying in situ seven course water proofing treatment with APP (Atactic Polypropylene) modified Polymeric membrane over roof consisting of first coat of bitumen primer@ 1.20Kg per Sqm, 2nd, 4th & 6th courses of bonding material @ 1.20 Kg/Sqm, which shall consist of blown type bitumen of grade 85/25 conforming to IS: 702, 3rd and 5th layers of roofing membrane APP modified Polymeric membrane 2.0mm thick of 3.0Kg/sqm weight consisting of five layers prefabricated with centre core as 100micron HMHDPE film. 7th, the top most layer shall be finished with brick tiles of class designation 100 grouted with cement mortar 1:3 (1cement : 3 fine sand) mixed with 2% integral water proofing compound by weight of cement over a 12mm layer of cement mortar 1:3 (1cement : 3 fine sand) and finished near which shall be paid for separately
73	Supplying and fixing in required slope 20 mm thick cement tiles (conforming to relevnant I.S) in 20 mm average thick cement sand mortar layer 1:4, admixed with water proofing compound as per manufacturer\"s specifications (Cico No.1 or equivalent conforming to relavent IS and as approved by engineer) laid over the existing roof surface after its thorough preparation through removal of loose layer, hacking and water washing followed by liberal spreading of neat cement slurry before laying cement mortar layer includinggrouting thetile joints withcementslurry allcomplete as per spesifications and directions of the engineer. Thewholeterrace sofinished shallbe floodedwith waterforminimumperiodof two week for curingand forfinaltest.
74	Removing old paint coatings from the concrete / plastered surfaces including ceiling and making them even and free from all kinds of defects such as burrs, undulations, imperfections by all suitable means such as scrapping, grinding, scrubbing, sand papering including repair of dents as per standard procedures etc. to make the surface ready to recieve fresh coat of paints all as per direction of engineer including cost of consumables, labour, tools tackles, scaffolding, protective gears, house keeping etc.
75	Applying Birla/JK/Asian white cement based wall putty (two coats) including base coat of alkaline resistance cement primer over cement plaster/ concrete surfaces after cleaning / scrubbing of the surfaces with wire brushes, soft brushes, sand papers, steel sheet scrappers and mechanical grinder etc. for removing all kind of burrs, imperfections, undulations and other such defects existing in the surface to achieve plain & even surface. including the cost of materials, labour etc. all complete as per direction of Engineer-in-Charge.
76	Supply and application ofDistemper of make Asian Tractor aqalock distemper (code 0013) of asian brand / Nerolac Beauty acrylic distemper / Bison acrylic distemper of Berger as approved to give an even shade: two coats over and including priming coat of approvedprimer of make Asian Trucare wall primer (0360) / Nerolac premium primer water thinnable / BP cement primer water thinnable of Berger as approved over well and evenly prepared concrete / plastered new / old surfaces including the cost of materials, consumables, labour, scaffolding, protective gears, house keeping etc. complete as per the direction of engineer.The item rate includes spreading of suitable clean protection covering on all exposed surfaces to protect them from staining. All surfaces surrounding to painted area such as door & window frames,glass pans, electrical fittings, switch board, floors, skirting, platform etc. shall be cleaned to sparkling clean condition using suitable thinners, detergents, chemical cleaners etc. under the scope of the item. including the cost of materials, labour etc. all complete as per specification & direction of Engineer-in-Charge. Note:- Painting to be takenup after attending all seepage / leakage problem. No peel off of paint & seepage spots shall be allowed.
77	Supply and applying premium emulsion paint of make Asian paint premium emulsion (product code 011) / Nerolac Beauty gold / Rangoli total care of Berger as approved to give an even shade: - Two coats on new work including priming coat with approved cement primer of make Asian Trucare wall primer (0360) / Nerolac premium primer water thinnable / BP cement primer water thinnable of Berger as approved after cleaning / scrubbing of the surfaces with wire brushes, soft brushes, sand papers, steel sheet scrappers and mechanical grinder etc. for removing all kind of burrs, imperfections, undulations and other such defects existing in the surface to achieve plain & even surface. The item rate include spreading of suitable clean protection covering on all exposed surfaces to protect them from staining. All surfaces surrounding to painted area such as door & window frames, glass pans, electrical fittings, switch board, floors, skirting, platform etc. shall be cleaned to sparkling clean condition using suitable thinners, detergents, chemical cleaners etc. under the scope of the item. including the cost of materials, labour etc. all complete as per specification & direction of Engineer-in-Charge. Note:- Painting to be takenup after attending all seepage / leakage problem. No peel off of paint & seepage spots shall be allowed.
78	Supplying and applying wheather proof exterior emulsion paint of make Asian dust proof (code 0012) / Nerolac excel / Weather coat smooth of Berger as approved of required shade on New work Two coatsincluding base coat of exterior wall primer of make Asian exterior Trucare wall primer (0065) / Nerolac exterior primer / Weather coat exterior primer of Berger as approved after cleaning / scrubbing of the surfaces with wire brushes, soft brushes, sand papers, steel sheet scrappers and mechanical grinder etc. for removing all kind of burrs, imperfections, undulations and other such defects existing in the surface including filling surface imperfections such as holes, dents, cracks by using mixture of white cement & fine sand (in the ratio of 1:3) to achieve plain & even surface. The item rate include spreading of suitable clean protection covering on all exposed surfaces to protect them from staining. All surfaces surrounding to painted area such aswindow / ventilator frames, glass pans etc. shall be cleaned to sparkling clean condition using suitable thinners, detergents, chemical cleaners etc. under the scope of the item.including the cost of materials, labour etc. all complete as per specification & direction of Engineer-in-Charge. Note:- Painting to be takenup after attending all seepage / leakage problem. No peel off of paint & seepage spots shall be allowed.
79	Supplying and application of 2 coats of Synthetic Enamel Paint Asian Apcolite Premium Enamel (0064) / Nerolac Synthetic Enamel / Laxol stain enamel of Berger on New / Old Concrete / Plastered / Steel / Wooden surfaces after application of primer coat (Asian Paint Metal Primer or similar quality in Berger / Nerolac) on the surfaces well prepared through scrapping, scrubbing, grinding and cleaning using wire brushes, soft brushes & sand papers etc. including cost of materials, labour, consumables cleaning of area after painting etc. complete as per direction of Engineer-in-Charge. The item rate includes the cost ofspreading suitable clean protection covering on all exposed surfaces to protect them from staining, cleaning of old stained / freshly stained surfaces surrounding to painted area such as door - windowframes & glass panes, electrical fittings, switch boards, floors, skirting, platform etc. to sparkling clean condition with the use of suitable thinners, detergents, chemical cleaners etc.
80	Painting background in 2 coats and Writing letters / Figures / Numerals on any new/old surface such as plastered, concrete, metal etc using (Apcolite Synthetic Enamel Paint of Asian Paint Product Code No 0001) of spcified shade including cost of paint material and metallic stencilsfor Alphabets / Numerals all complete as per the directions & Specifications of Engineer-in-charge.
81	Providing and fixing best quality stainless steel kitchen sink of SS grade 304 glossy finish (Jayna / Nirali / Carysil / Franke Brand) as approved without drain board of overall size 610 x 457 x 200 mm (24\"x18\"x8\") including all accessories such as choke stop stainer, outlet pipe upto floor trap etc.as required all complete as per drawing, specifications and direction of engineer in charge
82	Providing and fixing in position white glazed vitreous china ware wash basin \"H&R JOHNSON\"/ \"PARRY\"/ \"CERA\"as approved of following accessories jointed watertight as given below :(a). One no. wash basin of make \"H&R JOHNSON\" (P1015PW size 500 x 400 mm)/ \"PARRY\" (Indus C0471 size 500x400 mm) / \"CERA\" (Counsel S2040101 size 510x400mm) as approved.(b). One pair of wall bracket of 35mm x 35mm x 5mm M.S. angle painted with two coats of synthetic enamel paint over a coat of primer of approved quality and make.(c). One no. 32mm dia C.P. brass waste coupling with C.P. grating of Cat. No. ALD709 of Jaquar or similar approved quality of KOHLER / GROHE as approved.(d). One no. 32mm dia C.P. brass bottle trap with wall flange and connected C.P. pipe of cat. No ALD 769 of Jaquar or similar approved quality of KOHLER/GROHE as approved.(e). Two nos. 15mm dia C.P. brass angle valve with C.P. flange of superior quality (Jaquar CLARION cat. No. 23059 or similar approved quality of KOHLER / GROHE as approved).(f). One no. central hole C.P. brass basin mixer without popup waste system with 450mm long braided hoses of superior quality (Jaquar clarion cat. no. CQT 23167B or similar approved quality of KOHLER/GROHE as approved).(g). 32mm dia B class G.I. waste pipe (concealed) of required length (from bottle trap to nahani trap) including painting with anti corrosive bituminous paint.
83	Providing and fixing in position white glazed vitreous under counter oval shape china ware wash basin of make H&R JOHNSON / \"PARRY\"/ \"CERA\"as approved comprising of following accessories jointed watertight as given below: (a). One no. oval shape white wash basin H&R JOHNSON CRESS (UC WB P0813PW size 550x450mm)/ \"PARRY\" (Cascade NXT C0407 size550x445mm)/ \"CERA\" (Oval under counter S2030104 size560x470mm) as approved.
84	Providing & Fixing of white glazed vitreous china ware WASH WASIN 510mm X 400mm of make \"H&R Johnson \" or \"PARRY\", CERA, as approved by EIC With one,two tap hole and one over flow hole antisplash as Directed by the Engineer-in-Charge.
85	Providing & Fixing of white glazed vitreous china ware WASH WASIN 460mm X 310mm of make \"HINDWARE\" or \"PARRY\", CERA, H&R JOHNSON as approved by EIC With one,two tap hole and one over flow hole antisplash as Directed by the Engineer-in-Charge.
86	Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge.
87	Providing and fixing European type water closet white glazed vitreous china ware concealed S trap of \"H&R JOHNSON\" (Ruby concealed trap EWC P0448PW /\"PARRYWARE\" (NIAGARA C0252(S) / \"CERA\" (CIGNIA Concealed S1051108 S trap) as approved withGermfree EWC solid seat cover with C.P. brass hinges and rubber buffers of approved brand, with low level placed PVC flushing cistern (Dual Flush Tank white) connected with 32 mm dia PVC flush pipewith fittings and brackets, 15mm dia PVC inlet connection of required length and approved brand, 15mm dia C.P. brass angle valve with C.P. flange of superior quality all complete as per specification and direction of engineer in charge comprising following accessories:(a). White vitreous china wash down European type W.C. pan with white vitreous china \"S\" trap of approved brand.(b). Germfree EWC solid seat cover (white) of H&R Johnson ( P0424PW) / Parry (E8094) / Cera (Carina plus B1510106) with C.P. brass hinges and rubber buffersof approved brand (c). Low level placed PVC flushing cisternDual Flush Tank (white)of H & R Johnson ( P2829PW) / Parry (Slim-line Hexa E8319) / Cera (Corona B1020102) as approved with all accessories complete.(d). 15mm dia heavy duty PVC inlet connection ofrequired length and approved brand with brass unions complete.(e). 15mm dia C.P. brass angle valve with C.P. flange of superior quality (Jaquar clarion cat. No. CQT 23059 or similer approved quality of KOHLER/GROHE as approved).(f).Jet spray provision of ESSCO make ALE-ESS 547 with 1Meter PVC tube (stainless steel) with 01 nos 15mm dia CP brass angle valve with Cp flange of Jaquar clarion (Code CQT 23059) or similer approved quality of KOHLER/GROHE as approved.
88	Providing & Fixing of approved qualityEuropean type white glazed vitreous china ware water closet concealed S trap of \"H&R JOHNSON\" (Ruby concealed trap EWC P0448PW /\"PARRYWARE\" (NIAGARA C0252(S) / \"CERA\" (CIGNIA Concealed S1051108 S trap).
89	Providing and fixing Orissa pattern Water Closet (OP 23 (Open rim) of H & R Johnson / Orissa C0117 of Parryware/ Orissa COVYS 3010104 of CERA as approved with low level placed PVC flushing cistern (Dual Flush Tank {white} of H & R Jhonson / CERA/ Parry ) connected with 32 mm dia PVC flush pipe with all fittings and brackets with C.P. brass angle cock with CP flange (Clarion cat No. CQT 23059 make of JAQUARor similer approved quality in KOHLER / GROHE and 15 mm dia high quality PVC inlet connection of required length with all accessories, fittings & fixtures of best quality and brand. Item includes essentially following.(a). Orissa pattern white glazed viterous china W.C. pan of size 580mm x 440mm of approved brand and 100mm dia sand cast iron \"P\" trap.(b). Low level placed PVC flushing cisternDual Flush Tank (white) of H & R Johnson ( P2829PW) / Parry (Slim-line E8110 Deluxe) / Cera (Corona B1020102) as approved with all accessories complete.(c). 15mm dia PVC inlet connection of required length of approved brand with heavy duty C.P. brass unions and rubber washer etc.(d). 15mm dia C.P. brass angle valve with C.P. flange of superior quality (Jaquar Clarion cat. No.CQT 23059 or similer approved quality of KOHLER / GROHEas approved).
90	Providing & Fixing white vitreous china Orissa pattern water closet (OP 23) (open ring) of H&R Johnson / Orissa C0117 of Paryware / Orissa COLVIN S 3010108SN of Cera as approved quality .
91	Providing & Fixing of approved quality Anglo Indian W.C. PAN (PERRYWARE, HINDWARE OR CERA/JOHNSON make only).
92	Providing & Fixing Low level placed PVC flushing cisternDual Flush Tank (white)of H & R Johnson ( P2829PW) / Parry (Slim-line Hexa E8319) / Cera (Compass dual flush cistern B 1020106SN) as approved with all accessories complete.as Directed by the Engineer-in-Charge.
93	Providing & Fixing of approved quality URINAL (JHONSON PREMIUM COLLECTION/ PARRY WERE / HINDWARE) Dimensions:610 x 390 x390 mm TOPAZ HALF STALL URINAL IN WHITE COLOUR as Directed by the Engineer-in-Charge.
94	Providing & Fixing of approved quality URINAL(JHONSON PREMIUM COLLECTION/ PARRY WERE / HINDWARE) Dimensions: 450 X 325 x 280 mm RUBY FLAT BLACK URINAL IN WHITE COLOUR as Directed by the Engineer-in-Charge.
95	Providing & Fixing of Chromium plated (C.P.) urinal brass spreaderfittings of approved make as Directed by the Engineer-in-Charge.
96	Providing and laying or fixing ventilation pipes and fittings 50 mm dia in position, under floor or against walls, ISI market sand cast iron, socket and spigot soil, waste including cost of all fittings like bends, offset tees, tapers, collars, connection plugs, shoes, cowls and clamps confirming to IS : 1729 and jointing with tarred spun yarn and molten pig lead, caulking the joints, testing and painting with two coats of approved paint of required shade including cutting chase or holes in walls and floors and making good where required etc. complete.
97	Providing and laying or fixing ventilation pipes and fittings 75 mm dia in position, under floor or against walls, ISI market sand cast iron, socket and spigot soil, waste including cost of all fittings like bends, offset tees, tapers, collars, connection plugs, shoes, cowls and clamps confirming to IS : 1729 and jointing with tarred spun yarn and molten pig lead, caulking the joints, testing and painting with two coats of approved paint of required shade including cutting chase or holes in walls and floors and making good where required etc. complete.
98	Providing and laying or fixing ventilation pipes and fittings 100 mm dia in position, under floor or against walls, ISI market sand cast iron, socket and spigot soil, waste including cost of all fittings like bends, offset tees, tapers, collars, connection plugs, shoes, cowls and clamps confirming to IS : 1729 and jointing with tarred spun yarn and molten pig lead, caulking the joints, testing and painting with two coats of approved paint of required shade including cutting chase or holes in walls and floors and making good where required etc. complete.
99	Providing and laying 150mm dia. R.C.C. hume pipes non-pressure NP2 class (light duty) jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete:
100	Providing and laying 200mm dia R.C.C. hume pipes non-pressure NP2 class (light duty) jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete as per drawings, specifications and asdirected of the EIC.
101	Providing and laying 300mm dia. R.C.C. hume pipes non-pressure NP2 class (light duty) jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete:
102	Providing and laying 450mm dia. R.C.C. hume pipes non-pressure NP2 class (light duty) jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete:
103	Providing & Fixing of 100 MM DIA. S.W.P Pipes approved qualityas Directed by the Engineer-in-Charge:
104	Providing & Fixing of 150 MM DIA. S.W.P Pipes approved qualityas Directed by the Engineer-in-Charge:
105	Providing and fixing PVC Rain water pipes on wall face / embedded in ground un plasticized Rigidof Jain Irrigation / Finolex / Supreme as approved conforming to IS:13592 type A (4 Kg/Cm2) including shoes, bends, clamps etc. all complete jointing with seal ring leaving 10 mm for thermal expansion (I) single socketed pipes:110 mm dia.
106	Providing & Fixing of UPVC Pipes (IS : 15328) for Drainage / Severage System of Supreme/ Finlox / Jain Irrigation as approved make including jointing pipe with solvent cement rubber sing and Lubricant.(i) 160 mm SN - 4
107	Providing & Fixing of UPVC Pipes (IS : 15328) for Drainage / Severage System of Supreme/ Finlox / Jain Irrigation as approved make including jointing pipe with solvent cement rubber sing and Lubricant.(i) 110 mm SN - 8
108	Providing and fixing class \"B\" G.I. pipe of approved brand confirming to IS 1239 of following nominal bore with all fittings and specials of heavy duty as required including cutting the walls, floors trenching & reffilling as required, making them good, claimping on wall of approved quality claimps as per specifications, testing the line etc. complete as per drawings, specifications and direction of engineer.15mm dia nominal bore. Exposed on wall
109	Providing and fixing class \"B\" G.I. pipe of approved brand confirming to IS 1239 of following nominal bore with all fittings and specials of heavy duty as required including cutting the walls, floors trenching & reffilling as required, making them good, claimping on wall of approved quality claimps as per specifications, testing the line etc. complete as per drawings, specifications and direction of engineer.20mm dia nominal bore exposed on wall.
110	Providing and fixing class \"B\" G.I. pipe of approved brand confirming to IS 1239 of following nominal bore with all fittings and specials of heavy duty as required including cutting the walls, floors trenching & reffilling as required, making them good, claimping on wall of approved quality claimps as per specifications, testing the line etc. complete as per drawings, specifications and direction of engineer.25mm dia. nominal bore exposed on wall
111	Providing and fixing class \"B\" G.I. pipe of approved brand confirming to IS 1239 of following nominal bore with all fittings and specials of heavy duty as required including cutting the walls, floors trenching & reffilling as required, making them good, claimping on wall of approved quality claimps as per specifications, testing the line etc. complete as per drawings, specifications and direction of engineer.32mm dia. nominal bore exposed on wall
112	Providing and fixing class \"B\" G.I. pipe of approved brand confirming to IS 1239 of following nominal bore with all fittings and specials of heavy duty as required including cutting the walls, floors trenching & reffilling as required, making them good, claimping on wall of approved quality claimps as per specifications, testing the line etc. complete as per drawings, specifications and direction of engineer.40mm dia. nominal bore exposed on wall
113	Providing and fixing class \"B\" G.I. pipe of approved brand confirming to IS 1239 of following nominal bore with all fittings and specials of heavy duty as required including cutting the walls, floors trenching & reffilling as required, making them good, claimping on wall of approved quality claimps as per specifications, testing the line etc. complete as per drawings, specifications and direction of engineer.50mm dia. nominal bore exposed on wall
114	Providing & Fixing WATER TANK 500 Litre Capacity ofSINTEX PURE ROTO MOULD WHITE, Three Layer silver coated insulated antibacterialas Directed by the Engineer-in-Charge.
115	Providing & Fixing WATER TANK 1000 Litre Capacity ofSINTEX PURE ROTO MOULD WHITE, Three Layer silver coated insulated antibacterialas Directed by the Engineer-in-Charge.
116	Providing & Fixing WATER TANK 2000 Litre Capacity ofSINTEX PURE ROTO MOULD WHITE, Three Layer silver coated insulated antibacterialas Directed by the Engineer-in-Charge.
117	Providing and fixing 150mm X 150mm size square mouth gully trap in position best quality salt glazed stone warewith C.I. grating and 100mm P type outlet with 40mm thick precast cement conc. Cover fixed in M.S. angle frame (made out of required size angle) at top and constructing brick masonry chamber 300mm X 300mm internal size in 115mm thick brick masonry in cement mortar 1:4 (1 cement : 4 fine sand) with necessary excavation in all types of soils, bed of 100mm thick cement concrete 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate of 40mm nominal size) for foundation and around the trap and plastering with cement mortar 1:4 (1 cement : 4 fine sand) 15mm thick on internal and external surfaces, on top and upto 150mm below ground level, finished smooth, curing and fixing M.S. angle frameand precast conc. cover in 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20mm nominal size) and painting the grating & frame with two coats of approved anticorrosive paint etc. complete as per drawings and specifications. Note :- Reinforcement and MS angle frame shall be paid in relevant item.
118	Providing & fixing 100mm dia PVC waste coupling for kitchen sink with all fittings (900mm long suitable dia out let PVC pipe etc.) of approved quality to fit as per spot work requirement or as per directed by EIC.
119	Providing & fixing 100mm dia SS waste coupling for kitchen sink with all fittings (900mm long suitable dia out let PVC pipe etc.) of approved quality to fit as per spot work requirement or as per directed by EIC.
120	Providing & fixing F-type SS bracket pair of size 6 inch long for glass self to fit for holding the glass as per spot work requirement & as directed by EIC.
121	Providing & Fixing of Good quality C.P. brass bib cock 15 mm dia of weighing not less than 400 gm.as per direction of EIC.
122	Providing and fixing C.P. brass bib cock with C.P. flange 15 mm nominal bore of superior quality (Jaquar Clarion cat no. 23047 or similar approved quality of GROHE/KOHLER as approved) :
123	Providing & Fixing of brass BIB cock 15 mm dia good quality of weighing not less than 400 gm.
124	Providing & Fixing of PVC bib cock 15mm dia good quality (PRAYAG BRAND) or equivalent.
125	Providing & Fixing ofC.P. brass stop cock 15 mm dia good quality of weighting not less than 400 gm.As per direction of EIC.
126	Providing & Fixing ofbrass stop cock 15 mm dia approved quality of weighing not less than 400 gm.
127	Providing & Fixing ofP.V.C. Stop Cock approved quality (PRAYAG MAKE) as Directed by the Engineer-in-Charge.
128	Providing and fixing C.P. brass Angular stop cock with C.P. flange 15 mm nominal bore of superior quality (Jaquar Clarion cat no. 23059 or similar approved quality of GROHE/KOHLER as approved) :
129	Providing & Fixing of Jet Spray for European W.C. as Directed by the Engineer-in-Charge.
130	Providing & Fixing of Heavy Duty C.P. Luxury Health Forcet with all Fittings as Directed by the Engineer-in-Charge.
131	Providing & Fixing of approved C.P.brass pillar cock 15 mm dia. of weighting not less than 600 gm. (IS-1795 - 1982).
132	Providing and fixing C.P. brass pillar cock of superior quality 15 mm nominal bore (Jaquar continantal cat no. CON-021 or similar approved quality of GROHE/KOHLER as approved) :
133	Providing and fixing C.P. brass wall mixer with 3 in 1 system with provision for both hand shower and over head shower complete with 115mm long bend pipe on upper side, connecting legs and flanges (without hand & over head shower) CQT - 23281UPR of Jaquar Clarion series or similar approved quality of GROHE/KOHLER as approved.
134	Providing & Fixing of C.P. Wash Basin Mixer of approved brand as Directed by the Engineer-in-Charge.
135	Providing & Fixing ofC.P. brass shower rose with 15 or 20 mm inlet : 100 mm diaas directed by the Engineer-in-Charge.
136	Providing and fixing C.P. brass shower rose with Shower arm 160mm long and wall flange of superior quality (Jaquar cat no. OHS 1989 & SHA 477or similar approved quality of GROHE/KOHLER as approved).
137	Providing & fixing sink cock (wall mounting) with C.P. flange and swinging casted spout superior quality (Jaquar Clarion cat no. 23347 or similar approved quality of GROHE/KOHLER as approved).
138	Providing & Fixing of approved quality C.P. Bottel Trap Heavy Duty (Weight not less than 500 Grams) as Directed by the Engineer-in-Charge.
139	Providing & Fixing of approved quality C.P. Waste Coupling 32mm Dia. as Directed by the Engineer-in-Charge.
140	Providing & Fixing of approved quality C.P. Waste Coupling 40mm Dia.as Directed by the Engineer-in-Charge.
141	Providing & Fixing of approved quality C.P. Waste Coupling 50mm Dia. as Directed by the Engineer-in-Charge.
142	Providing & Fixing of approved quality Brass Spindle Small size as Directed by the Engineer-in-Charge.
143	Providing & Fixing of approved quality Brass Spindle Medium size as Directed by the Engineer-in-Charge.
144	Providing & Fixing of approved quality Brass Spindle Big HEAVY size as Directed by the Engineer-in-Charge.
145	Providing & Fixing of approved quality Brass Spindle for Concealed Stop Cock as Directed by the Engineer-in-Charge.
146	Providing & Fixing of brass spindle - regular - SOLO / CLARION - COLD - UNIT-2 (Cat. No. ZCQ-CHR-023B) of Jaquar make fit for all type & size C.P. Jaquar fittings as per spot work requirement & as directed by EIC.
147	Providing & Fixing of approved quality Brass JUMPHER as Directed by the Engineer-in-Charge.
148	Providing & Fixing of approved quality P.V.C. Washer for Bibcock as Directed by the Engineer-in-Charge.
149	Providing & Fixingof approved quality Gun Metal MANIK/ L & K Make Wheel Valve Screw down Type, Heavy Duty Conforming to IS - 778: 15 mm dia.as Directed by the Engineer-in-Charge.
150	Providing & Fixingof approved quality Gun Metal MANIK/ L & K Make Wheel Valve Screw down Type, Heavy Duty Conforming to IS - 778: 20 mm dia.as Directed by the Engineer-in-Charge.
151	Providing and fixing in position heavy duty gun metal wheel valve screw down type confirming to IS: 778 latest revision of approved make including the cost of all jointing materials, fittings and testing etc. complete as per specifications of the following nominal bore. - 25mm dia
152	Providing and fixing in position heavy duty gun metal wheel valve screw down type confirming to IS: 778 latest revision of approved make including the cost of all jointing materials, fittings and testing etc. complete as per specifications of the following nominal bore. - 32mm dia
153	Providing and fixing in position heavy duty gun metal wheel valve screw down type confirming to IS: 778 latest revision of approved make including the cost of all jointing materials, fittings and testing etc. complete as per specifications of the following nominal bore. - 40mm dia
154	Providing & Fixing of approved quality Gun Metal FERRULE Heavy Duty as Directed by the Engineer-in-Charge. : 20 mm dia.
155	Supplying of approved quality Gun Metal FERRULE Heavy Duty as Directed by the Engineer-in-Charge: 30 mm dia.
156	Providing & Fixing ofPVC connection pipe (PRAYAG MAKE) with PVC unions : 30 cm length : 15 mm nominal bore as Directed by the Engineer-in-Charge.
157	Providing & Fixing PVC connection pipe (PRAYAG MAKE) with PVC unions : 45 cm length : 15 mm nominal bore as Directed by the Engineer-in-Charge.
158	Providing & Fixing ofuplasticised PVC connection pipe (PRAYAG MAKE) with PVC unions : 60 cm length : 15 mm nominal bore as Directed by the Engineer-in-Charge.
159	Providing & Fixing ofCP connection pipe : 45 cm length : 15 mm nominal bore as Directed by the Engineer-in-Charge.
160	Providing & Fixing of approved quality Brass Float Valve 15 mm Dia as Directed by the Engineer-in-Charge.
161	Providing & Fixing of approved quality Brass Float Valve 25 mm Dia as Directed by the Engineer-in-Charge.
162	Providing & Fixing of approved quality Brass Float Valve 32 mm Dia. as Directed by the Engineer-in-Charge.
163	Providing & Fixing of approved quality Brass Chiria for Float Valve 32mm as Directed by the Engineer-in-Charge.
164	Providing & Fixing of approved quality Float Valve Aluminium RODS as per requirement Heavy Duty as Directed by the Engineer-in-Charge
165	Providing & Fixing of approved quality Float Valve P.V.C. BALLS Heavy Duty as Directed by the Engineer-in-Charge: 100 MM DIA
166	Providing & Fixing of approved quality Float Valve P.V.C. BALLS Heavy Duty as Directed by the Engineer-in-Charge: 150 MM DIA
167	Providing & Fixing of approved quality Float Valve P.V.C. BALLS Heavy Duty as Directed by the Engineer-in-Charge: 250 MM DIA
168	Providing & Fixing of P.V.C. Syphon Set as Directed by the Engineer-in-Charge.
169	Providing & Fixing of 32mm dia PVC flushing bend for low level cistern as Directed by the Engineer-in-Charge.
170	Providing & Fixing ofHandle for Low Level Cisternas Directed by the Engineer-in-Charge.
171	Providing & Fixing of PVC waste pipe 1 inch dia 900mm long with 32mm PVC waste coupling for Kitchen Sink & Wash Basin with all fittings as Directed by the Engineer-in-Charge.
172	Providing & Fixing of approved quality 15 mm Ball Valves (FEMALE THREAD PRAYAG BRAND Catalogue No 251) as Directed by the Engineer-in-Charge.
173	Providing & Fixing of approved quality 20 mm Ball Valves (FEMALE THREAD PRAYAG BRAND Catalogue No 252) as Directed by the Engineer-in-Charge.
174	Providing & Fixing of approved quality 25 mm Ball Valves (FEMALE THREAD PRAYAG BRAND Catalogue No 253) as Directed by the Engineer-in-Charge.
175	Providing & Fixing of approved quality PTMT Ball Cock 15mm complete with Epoxy Coated Aluminium Rod & H.D. Ballas Directed by the Engineer-in-Charge.
176	Providing & Fixing ofC.P. Cap for Angle Valve & Concealed Valve as Directed by the Engineer-in-Charge.
177	Providing & FixingP.V.C. Toilet Seat CoverHeavy Duty HINDWARE / CERA / PARRYWARE/H&R JHONSAN make for European W.C. as Directed by the Engineer-in-Charge.
178	Providing & Fixing ofP.V.C. Toilet Seat Cover Heavy Duty HINDWARE / CERA / PARRYWARE/JHONSAN make for ANGLO INDIAN W.C. as Directed by the Engineer-in-Charge.
179	Providing & Fixing of Pig Lead as Directed by the Engineer-in-Charge.
180	Providing & Fixing ofHamp Spun Yard (JUTE) as Directed by the Engineer-in-Charge.
181	Providing & Fixing ofP.V.C Bend 110 mm Dia for Rain Water Pipes as Directed by the Engineer-in-Charge.
182	Providing & Fixing of approved quality SHOE for Rain Water Pipes as Directed by the Engineer-in-Charge 110 MM DIA.
183	Providing & Fixing of approved quality COLLER for Rain Water Pipes as Directed by the Engineer-in-Charge: 110 MM DIA.
184	Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete: 15 mm nominal bore.
185	Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete : 20 mm nominal bore.
186	Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete: 25 mm nominal bore.
187	Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete : 32 mm nominal bore.
188	Providing & Fixing of approved quality GI fittings of Heavy duty ISI marked 20 mm to 15 mm dia reducer Elbow as Directed by the Engineer-in-Charge.
189	Providing & Fixing of approved quality GI fittings of Heavy duty ISI marked 25 mm to 15 mm dia Reducer Elbow as Directed by the Engineer-in-Charge.
190	Providing & Fixing of approved quality GI fittings of Heavy duty ISI marked 25 mm to 20 mm dia reducer Elbow as Directed by the Engineer-in-Charge.
191	Providing & Fixing of approved quality GI fittings of Heavy duty ISI mark 32 mm to 15 mm dia Reducer ELBOW as Directed by the Engineer-in-Charge.
192	Providing & Fixing of approved quality GI fittings of Heavy duty ISI mark 32 mm to 20 mm dia Reducer ELBOW as Directed by the Engineer-in-Charge.
193	Providing & Fixing of approved quality GI fittings of Heavy duty ISI mark 32 mm to 25 mm dia Reducer ELBOW as Directed by the Engineer-in-Charge.
194	Providing & Fixing of approved quality G.I. elbow 15 mm. dia. Heavy duty as Directed by the Engineer-in-Charge.
195	Providing & Fixing of approved quality G.I. elbow 20 MM dia. Heavy duty as Directed by the Engineer-in-Charge.
196	Providing & Fixing of approved quality G.I. elbow 25 MM dia. Heavy duty as Directed by the Engineer-in-Charge.
197	Providing & Fixing of approved quality G.I. elbow 32 mm. dia. Heavy duty as Directed by the Engineer-in-Charge.
198	Providing & Fixing of approved quality G.I. nipple 15 mm dia of 50 mm long as Directed by the Engineer-in-Charge.
199	Providing & Fixing approved quality G.I. nipple 15 mm dia of 100 mm longas Directed by the Engineer-in-Charge.
200	Providing & Fixing of approved quality G.I. nipple 15 mm dia of 150 mm longas Directed by the Engineer-in-Charge.
201	Providing & Fixing of approved quality G.I. nipple 20 mm dia of 50 mm long as Directed by the Engineer-in-Charge.
202	Providing & Fixing of approved quality G.I. nipple 20 mm dia of 100 mm long as Directed by the Engineer-in-Charge.
203	Providing & Fixing of approved quality G.I. nipple 20 mm dia of 150 mm long as Directed by the Engineer-in-Charge.
204	Providing & Fixing of approved quality G.I. nipple 25 mm dia of 50 mm long as Directed by the Engineer-in-Charge.
205	Providing & Fixing of approved quality G.I. nipple 25 mm dia of 100 mm long as Directed by the Engineer-in-Charge.
206	Providing & Fixing of approved quality G.I. nipple 25 mm dia of 150 mm long as Directed by the Engineer-in-Charge.
207	Providing & Fixing of approved quality G.I. nipple 32 mm dia of 50 mm long as Directed by the Engineer-in-Charge.
208	Providing & Fixing of approved quality G.I. nipple 32 mm dia. 100 mm long as Directed by the Engineer-in-Charge.
209	Providing & Fixing of approved quality G.I. nipple 32 mm dia of 150 mm long as Directed by the Engineer-in-Charge.
210	Providing & Fixing of approved quality G.I. plug 15 mm. dia. Heavy duty as Directed by the Engineer-in-Charge.
211	Providing & Fixing of approved quality G.I. plug 20 mm. dia. Heavy duty as Directed by the Engineer-in-Charge.
212	Providing & Fixing of approved quality G.I. plug 25 mm. dia. B- class as Directed by the Engineer-in-Charge.
213	Providing & Fixing of approved quality G.I. plug 32 mm. dia. B- class as Directed by the Engineer-in-Charge.
214	Providing & Fixing of approved quality G.I. holder clamp 15 mm. dia. Heavy duty as Directed by the Engineer-in-Charge.
215	Providing & Fixing of approved quality G.I. holder clamp 20 MM. dia. Heavy duty as Directed by the Engineer-in-Charge.
216	Providing & Fixing of approved quality G.I. holder clamp 25 MM. dia. Heavy dutyas Directed by the Engineer-in-Charge.
217	Providing & Fixing of approved quality G.I. holder clamp 32 MM. dia. Heavy dutyas Directed by the Engineer-in-Charge.
218	Providing & Fixing of approved quality G.I. holder clamp 40 MM. dia. Heavy duty as Directed by the Engineer-in-Charge.
219	Providing & Fixing of approved quality G.I. holder clamp 50 MM. dia. Heavy duty as Directed by the Engineer-in-Charge.
220	Providing & Fixing of approved quality GI fittings of Heavy duty class ISI marked 15mm dia Socket (Ordinary/reducing type) as Directed by the Engineer-in-Charge.
221	Providing & Fixing of approved quality GI fittings of Heavy duty class ISI marked 20mm dia Socket (Ordinary/reducing type) as Directed by the Engineer-in-Charge.
222	Providing & Fixingof approved quality GI fittings of Heavy duty class ISI marked 25mm dia Socket (Ordinary/reducing type) as Directed by the Engineer-in-Charge.
223	Providing & Fixing of approved quality GI fittings of Heavy duty class ISI marked 32mm dia Socket (Ordinary/reducing type)as Directed by the Engineer-in-Charge.
224	Providing & Fixing of approved quality GI fittings of Heavy duty class ISI marked 15 mm dia Bend(Ordinary / reducing type) as Directed by the Engineer-in-Charge.
225	Providing & Fixing of approved quality GI fittings of Heavy duty class ISI marked 20 mm dia Bend(Ordinary / reducing type)as Directed by the Engineer-in-Charge.
226	Providing & Fixing of approved quality GI fittings of Heavy duty class ISI marked 25 mm dia Bend(Ordinary / reducing type) as Directed by the Engineer-in-Charge.
227	Providing & Fixing of approved quality GI fittings of Heavy duty class ISI marked 32 mm dia Bend(Ordinary / reducing type) as Directed by the Engineer-in-Charge.
228	Providing & Fixing of approved quality GI fittings of Heavy duty ISI marked 20 mm to 15 mm dia Reducer TEE as Directed by the Engineer-in-Charge.
229	Providing & Fixing of approved quality GI fittings of Heavy duty ISI marked 25 mm to 15 mm dia Reducer TEE as Directed by the Engineer-in-Charge.
230	Providing & Fixing of approved quality GI fittings of Heavy duty ISI marked 25 mm to 20 mm dia Reducer TEE as Directed by the Engineer-in-Charge.
231	Providing & Fixing of approved quality GI fittings of Heavy duty ISI marked 32 mm to 15 mm dia Reducer TEE as Directed by the Engineer-in-Charge.
232	Providing & Fixing of approved quality GI fittings of Heavy duty ISI marked 32 mm to 20 mm dia Reducer TEE as Directed by the Engineer-in-Charge.
233	Providing & Fixing of approved quality GI fittings of Heavy duty ISI marked 32 mm to 25 mm dia Reducer TEE as Directed by the Engineer-in-Charge.
234	Providing & Fixing of approved quality G.I. Tee 15 mm. dia Heavy duty as Directed by the Engineer-in-Charge.
235	Providing & Fixing of approved quality G.I. Tee 20 mm.dia. Heavy duty as Directed by the Engineer-in-Charge.
236	Providing & Fixing of approved quality G.I. Tee 25 mm.dia. Heavy duty as Directed by the Engineer-in-Charge.
237	Providing & Fixing of approved quality G.I. Tee 32 mm. dia Heavy duty as Directed by the Engineer-in-Charge.
238	Providing & Fixing of approved quality Teflon Tape (1/2\") as Directed by the Engineer-in-Charge.
239	Providing & Applying ofM Seal Pidilite in one kg pack as Directed by the Engineer-in-Charge.
240	Removing M.S. Flat from the Window / Balcony Grills for opening of Night Latch at all heights with necessary arrangments etc., complete as directed by the Engineer-in-Charge.
241	Providing and fixing cut edge mirror 6mm thick of overall size600X450mm especially fabricated with superior glass (of approved quality) with designer acrylic PVC frame of approved colour and make mounted around with 6mm thick non-water absorbent Acrylic/PVC material backing fixed with cleats, all complete as per the specifications and directions of Engineer.
242	Providing and fixing glass shelf 6mm thick Jaquar continental Cat no. 1171, or similar approved quality of GROHE/KOHLERbrand including all fixtures and fittings complete as per specifications.
243	Providing & Fixing of 6mm thick 600mm x 125mm wide glass self with rounded edge (alround) as Directed by the Engineer-in-Charge.
244	Providing and fixing C.P. brass towel rail of Jaquar Continental cat no. 1111, 600mm long or similar approved quality of GROHE/KOHLERbrand including all fixtures and fittings complete as per specifications.
245	Providing and fixing C.P. brass towel ring of Jaquar Continental cat no. 1121 or similar approved quality of GROHE/KOHLERbrand including all fixtures and fittings complete as per specifications.
246	Providing and fixing best quality painted metalic cloth hanger having 460 mm length as approved by engineer in charge and as per specifications.
247	Providing & Fixing of Water proof plywood 4 mm thick ISI marked.
248	Providing & Fixing of Water proof plywood 6 mm thick ISI marked.
249	Providing & Fixing of Water proof plywood 8 mm thick ISI marked.
250	Providing & Fixing of Water proof plywood 12 mm thick ISI marked.
251	Providing & Fixing of Commercial plywood 4 mm thick ISI marked .
252	Providing & Fixing ofCOMMERCIAL PLYWOOD 6 mm thick ISI marked .
253	Providing & Fixing ofCOMMERCIAL PLYWOOD 12 mm thick ISI marked.
254	Providing & Fixing of Commercial plywood 19 mm thick ISI marked.
255	Providing & Fixing of 12mm thick Teakwood rib 25mm wide as Directed by the Engineer-in-Charge.
256	Providing & Fixing of 12mm thick Teakwood rib 40mm wide as Directed by the Engineer-in-Charge.
257	Providing & Fixing of 1.0 mm thick decorative laminated sheet as Directed by the Engineer-in-Charge.
258	Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade I Type II, in paneling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge :Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side.
259	Providing & Fixing MS Wire Nails as Directed by the Engineer-in-Charge.
260	Providing & Fixing approved quality of M.S. Black (Shoes Nails) as directed by the Engineer and deposited in civil maintenance store.
261	Providing & Fixing of the following approved quality fittings Stainless Steel Aldrop of 16mm dia 300 mm long with necessary nuts & screws etc.: S.S. Aldrop as Directed by the Engineer-in-Charge.
262	Providing & Fixing of the following approved quality fittings Sliding door bolts of 16mm dia 300 mm long with necessary nuts & screws etc.: Anodized Aluminium as Directed by the Engineer-in-Charge.
263	Providing & Fixing ofSliding Door Bolts of 16mm Dia 300 mm Long with necessary nuts & screws etc.. :M.S. NICKLE CHROMIUM as Directed by the Engineer-in-Charge.
264	Providing & Fixing of Anodised Aluminium handles 125 mm with plate 175x32 mm Door handleas Directed by the Engineer-in-Charge.
265	Providing & Fixing of M.S. Nickel Chromium \"D\" Heavy quality Door Handle of 125 mm Long as Directed by the Engineer-in-Charge.
266	Providing & Fixing of Anodized Aluminium Tower Bolts 100 mm long as Directed by the Engineer-in-Charge.
267	Provinding & Fixing of Anodized Aluminium Tower Bolts 150 mm long as Directed by the Engineer-in-Charge.
268	Providing & Fixing of Anodized Aluminium Tower Bolts 200 mm long as Directed by the Engineer-in-Charge.
269	Providing & Fixing of ISI marked M.S. NICKLE CHROMIUM TOWER BOLT: 250 x 10 mm as Directed by the Engineer-in-Charge.
270	Providing & Fixing of ISI marked M.S. NICKLE CHROMIUM TOWER BOLT: 200 x 10 mm as Directed by the Engineer-in-Charge.
271	Providing & Fixing of ISI marked M.S. NICKLE CHROMIUM TOWER BOLT BLACK FINISH (BARREL TYPE): 150 x 10 mm as Directed by the Engineer-in-Charge.
272	Providing & Fixing of ISI marked M.S. NICKLE CHROMIUM TOWER BOLT BLACK FINISH (BARREL TYPE): 100 x 10 mm as Directed by the Engineer-in-Charge.
273	Providing & Fixing of Anodized Aluminium Hasps & staples of 100mm size with necessary screws etc. as Directed by the Engineer-in-Charge.
274	Providing & Fixing ofM.S. Oxidized Butt Hinges of 75 mm (14 Gauge) size with necessary screws etc.,as Directed by the Engineer-in-Charge.
275	Providing & Fixing of M.S. Oxidized butt Hinges of 100mm (14 gauge) sizes as Directed by the Engineer-in-Charge.
276	Providing & Fixing of M.S. Oxidized butt Hinges of 125mm (12 gauge) sizes as Directed by the Engineer-in-Charge.
277	Providing & Fixing of approved quality Stainless steel butt hinges 100mm sizeas Directed by the Engineer-in-Charge.
278	Providing & Fixing of approved quality C.P. Hooks and eyes of 15 mm dia 150 mm long for shuttersas Directed by the Engineer-in-Charge.
279	Providing & Fixing of Galvanized M.S. wire mesh of 0.56 - 0.63 mm dia with 12 mesh per 2.5 cm in eitheras Directed by the Engineer-in-Charge.
280	Providing & Fixing of S.S. wire mesh 0.56 - 0.63 mm dia with 12 mesh per 2.5 cm in eitheras Directed by the Engineer-in-Charge.
281	Providing & Fixing of GI chiken mesh 20mm x 20mm x 26 SWGas Directed by the Engineer-in-Charge.
282	Providing & Fixing of M.S. Door Tee spring (YEN BRAND FOR DESIGNER DOOR SPRING HELIX)as Directed by the Engineer-in-Charge.
283	Providing & Fixing of 18-20mm dia plain Heavy duty Aluminium pipe for pelmets as Directed by the Engineer-in-Charge.
284	Providing & Fixing of approved quality Pelmate Socket as Directed by the Engineer-in-Charge.
285	Providing & Fixing of 25mm dia ribbed Heavy Duty Aluminium rod for Towel rod as Directed by the Engineer-in-Charge.
286	Providing & Fixing of approved quality Heavy Duty C.P. brass brackets for Towel rod as Directed by the Engineer-in-Charge.
287	Providing & Fixing of Heavy Duty Aluminium anodized bracket for 125 mm wide glass shelf as Directed by the Engineer-in-Charge.
288	Providing & Fixing of approved quality of 4mm thick plain glass in required size as Directed by the Engineer-in-Charge.
289	Providing & Fixing of approved quality of 5mm thick plain glass in required size as Directed by the Engineer-in-Charge.
290	Providing & Fixing of approved quality of 6 mm thick plain glass in required size as Directed by the Engineer-in-Charge.
291	Providing & Fixing of approved quality of 8 mm thick plain glass in required size as Directed by the Engineer-in-Charge.
292	Providing & Fixing of approved quality of 12 mm thick plain glass in required size as Directed by the Engineer-in-Charge.
293	Providing & Fixing approved quality of 4mm thick frosted glass in required size as Directed by the Engineer-in-Charge.
294	Providing and fixing Sun control film 25 micron thick of approved colour and shade, complete in all respect at all level, as directed by Engineer -in- charge
295	Providing & Fixing Aluminium sliding window lock approved andas Directed by the Engineer-in-Charge.
296	Providing & Fixing of Aluminium U Channel of size 6 mm x 6 mm as Directed by the Engineer-in-Charge.
297	Providing & Fixing of Chromium plated (C.P.) liquid Soap containers of brass of approved make as Directed by the Engineer-in-Charge.
298	Providing & Fixing of Steel Window Handle Heavy Type suitable for steel window with necessary type bolts washers as Directed by the Engineer-in-Charge.
299	Providing & Fixing ofM.S. Oxidized Heavy Duty Channel Clipped Peg Stays for Steel Windows with necessary secrewsas Directed by the Engineer-in-Charge.
300	Providing & Fixing ofM.S. Nut Bolts etc. as Directed by the Engineer-in-Charge.
301	Providing & Fixing ofSAFETY CHAIN for Main Door as Directed by the Engineer-in-Charge.
302	Providing & Fixing ofRubber Bush Buffer 50 mm Long as Directed by the Engineer-in-Charge.
303	Providing and fixing aluminum hanging floor door stopper ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete: Single rubber stoper as per drawings, specifications and directions of Engineer-in-charge.
304	Providing & Fixing ofPVC Roller suitable for Sliding Window Shutter as Directed by the Engineer-in-Charge.
305	Providing & Applying of Fevicol Pidilite (R) SH Brand (synthetic resin adhesive) in one kg pack as Directed by the Engineer-in-Charge.
306	Providing & Applying ofPUTTY (Wood Work) as Directed by the Engineer-in-Charge.
307	Providing & Applying of Glass puttyas Directed by the Engineer-in-Charge.
308	Providing & Fixing of neoprin rubber gasket for glazed pannels etc. as Directed by the Engineer-in-Charge.
309	Providing & Fixing of Silicon as Directed by the Engineer-in-Charge.
310	Providing and fixing \"GODREJ\" or other approved similar make night latch with 3 keys including all fittings and fixtures as per manufacture\"s specifications complete as per specifications and direction of EIC.
311	Providing & Fixing of Bright Finished Brass 100 mm mortice latch and lock with 6 levers and pair of lever handles with necessary screws etc., complete (Best make of approved quality)as Directed by the Engineer-in-Charge.
312	Providing & Fixing of Godrej mark Cylindrical Locks – Keyed (Entrance) Polished Brass (Product No.5328) as directed by the engineer.
313	Providing & Fixing of aluminium handle of American / Round shaped suitable for aluminium doors of heavy qualityas Directed by the Engineer-in-Charge.
314	Repairing of self coiling type existing roling shutter for proper functioing including greasing of coils, ball bearing and vertical channels etc. all complete
315	Providing and fixing Corner cabinet \"icon\" or similar approved brand having double door as per specification & direction of engineer in charge.
316	Providing & Fixing of Hole Tide Liquid Solvent as Directed by the Engineer-in-Charge.
317	Providing & Applying ofEMERY PAPER / SAND PAPER of following sizes 60 no as Directed by the Engineer-in-Charge.
318	Providing & Applying ofEMERY PAPER / SAND PAPER of following sizes 80 no as Directed by the Engineer-in-Charge.
319	Providing & Applying ofEMERY PAPER / SAND PAPER of following sizes 100 no as Directed by the Engineer-in-Charge.
320	Providing & Fixing of DRILL BITS FOR BOASCH Power Drill Machine - GBM 13 - 2 Part No. - 0601169055 Wt - 1.95 as Directed by the Engineer-in-Charge.
321	Providing & Fixing of DRILL BITS FOR BOASCH Power Drill Machine - GBH 4 DFE Part No. 0611236703 Wt. 3.9 Kg as Directed by the Engineer-in-Charge.
322	Providing & Fixing of DRILL BITS FOR BOASCH Power Drill Machine - GSH 11 E Part No. 0611316703 Wt 10.1 Kg as Directed by the Engineer-in-Charge.
323	Providing & Applying of Concrete drill bit upto 6mm dia for drilling machine of approved brand or BUSH OR HILTI MAKE as Directed by the Engineer-in-Charge.
324	Providing & Applying of Full size Concrete drill bit upto 12mm dia for drilling machine of approved brand or BUSH OR HILTI MAKE as Directed by the Engineer-in-Charge.
325	Providing & Applying of Full size Concrete drill bit upto 16mm dia for drilling machine of approved brand or BUSH OR HILTI MAKE as Directed by the Engineer-in-Charge.
326	Providing & Applying of Full size Concrete drill bit upto 20mm dia for drilling machine of approved brand or BUSH OR HILTI MAKE as Directed by the Engineer-in-Charge.
327	Providing & Applying of Hammer drilling machine with drilling upto 30mm dia on Hire charges basis per day.
328	Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS: 6315 marked, for doors, including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single place M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge : With stainless steel cover plate.
329	Providing & Fixing of Godrej mark Hydraulic Door Closers, Door Closer Single / Two Speed (T) {Product No 9185 / 3975} as directed by the Engineer.
330	Providing & Fixing of medium duty hydrolically regulated door closer of type-2, suitable for left or right or universal with necessary screws/ nuts, bolts etc. complete as Directed by the Engineer-in-Charge.
331	Providing & Fixing Godrej mark Euro Profile Handle Set - 240 mm Universal / Supreme (Gold) (Product No. 9933 / 9932) as Directed by the Engineer-in-Charge.
332	Providing & Fixing of Nickel plated M.S. wood screw 15mm long as Directed by the Engineer-in-Charge.
333	Providing & Fixing of Nickel plated M.S. wood screw 20mm long as Directed by the Engineer-in-Charge.
334	Providing & Fixing of Nickel plated M.S. wood screw 25mm long as Directed by the Engineer-in-Charge.
335	Providing & Fixing of Nickel plated M.S. wood screw 32mm long as Directed by the Engineer-in-Charge.
336	Providing & Fixing of Nickel plated M.S. wood screw 40mm long as Directed by the Engineer-in-Charge.
337	Providing & Fixingof Nickel plated M.S. wood screw 50mm long as Directed by the Engineer-in-Charge.
338	Providing & Fixing of Nickel plated M.S. wood screw 75mm long as Directed by the Engineer-in-Charge.
339	Providing & Fixing ofNon Breakable P.V.C. Nylon Sleeves: 25 mm Longas Directed by the Engineer-in-Charge.
340	Providing & Fixing ofNon Breakable P.V.C. Nylon Sleeves: 35 mm Longas Directed by the Engineer-in-Charge.
341	Providing & Fixing ofNon Breakable P.V.C. Nylon Sleeves: 50 mm Longas Directed by the Engineer-in-Charge.
342	Providing & Applying ofGREASE of Best Quality as Directed by the Engineer-in-Charge.
343	Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, complete all as per approved design, including Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) Note :- Sectional weight of only steel members shall be measured for payment.
344	Providing & Fixing of Aluminium sheet 1mm thick as Directed by the Engineer-in-Charge.
345	WOOD WORK REPAIR:- Repairing of Chair/ sofa etc including replacement of high density cushion (40 kg / CuM) and cloth of standard and approved make & colour etc. with Paint/ polishing on wooden portion. Repairing to be taken upincluding replacing spring, wood etc. as per functional requirement to look like new one. Note:- Rate of cloth shall be not lessthan @ Rs. 300 per SqM.
346	Sofa five seater set.
347	Sofa three seater.
348	Sofa/ chair single seater.
349	Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with Second class teak wood complete as per drawings, specifications and direction of Engineer.
350	Providing & Fixingof modular kitchen parts having manually fabricated shutters in 19mm thick marine ply having area about 2.5 sqm (deviation upto (+/-) 10.00% shall be included in the quoted rate) confirming to IS 710, KITPLY GOLD / GREENLAM / CENTURY make as approved with laminate of approved make (Kitplay / Greenlam / Century) & shade on both faces (1mm th. laminate of front face & 0.8mm on back face with the provision of edge bending) including 2nd class teak wood leaping of suitable size along with all necessary SS 202 grade branded (AVRO / LIFE TIME) accessories, hardware fittings and fixtures for commissioning of the modular kitchen as per site requirement:-
351	SS C/S Bsk. 21\"
352	SS M.P. Bsk. 21\"x 4\"
353	SS Thali Bsk. 21\"
354	SS Pull Out 6\" x 3\" (Two Shelf bottle pullout)
355	SS P. Cut Bsk. 21\"
356	SS MP Bsk.21\" x 4\"
357	SS M.P. BSk. 21\" x 6\"
358	Frame wood 2.5\"
359	Tele. Channels. 20\"
360	Soft closing Hinges 0^ & 8^
361	Handles Assorted sizes (SS 8mm)
362	Fascia / Shutters (Bottom) including laminates.
363	Providing & fixing Aluminium Aldrops, handle (all types), hinges, tower bolt, pagstray, I-hooks etc.to fit & Shape as per spot work requirement & as directed by EIC.
364	For Anodised Aluminium
365	For Coloured Aluminium
366	Supply & Fixing of Gal Valume sheeting over truss, Color complying to ASTM A792, base metal thickness 0.80mm, alloy coating AZ 150 (Aluminium 55%, Zin 43.50% and Silicon 1.5%),Yield Strength: 350 MPA, Paint coating regular modified polyster top coat 25 microns & bottom coat 12 microns epoxy, top color: Combination of Blue and Off White and bottom color grey. The Steel Sheet shall be 3\"-0\" (914mm) width which shall be curved and moulded at site using mechanical press and dies to the desired shape to form 2\"-0\" (605mm) wide interlocking panels. These panels shall be erected in position and the joints are seamed with gasket etc. whenever is required. The installation should be done by mechanized system.(Mesurment to be paid actul area of sheet as per site. Over lap of sheet area not to be paid.)
367	Providing corrugated 6mm thick Coloured Fiber sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diaMetre with bitumen and G.I. limpet washer filled with white lead excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (Weight of 6 mm fiber sheet not less then 10.76 Kg/M2)
368	Providing corrugated G.S. ( Galvanised steel ) sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diaMetre with bitumen and G.I. limpet washer filled with white lead and including a coat of approved steel primer and two coat of approved paint on a overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required: 0.63 mm thick with zinc coating not less than 275 gm/m2.
369	Providing ridges or hips of width 60 cm over all width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia. G.I. limpet and bitumen washers complete. 0.80 mm thick with Zinc coating not less than 275gm/m2.
370	Providing non-asbestos high impact polypropylene reinforced cement 6mm thick corrugated sheet (as per IS CODE) roofing up to any pitch and fixing with polymer coated J, or L hooks, bolts and nuts 8 mm dia G.I plain and bitumen washers or with self drilling faster and EPDM washers etc. complete excluding the cost of purlins, rafters and trusses: corrugated sheet and including cutting to size and shape wherever required.
371	Supplying factory made fiberglass reinforced plastics (F.R.P) chajja 4mm thick of required colour,size and design made by resin transfer moulding (RTM) machine technology, resulting in void free compact laminate in single piece, having smooth gradual slope curvature for easy drainage of water and duly reinforced by 2nos. vertically and 1 nos. horizantally 50x2mm thick M.S flat with with 12mm in built hole for grouting on the existing wall along with the 50mm flages duly inserted and sealed in the wall complete in one single piece casted monolithically,including all necessary fitting. The ERP Chajja should be manufactured using unsaturated polyster resin as per IS: 6746 duly reinforced with fiber glass chopped strand mat(CSM) as per IS: 11551 complete with protective Gel coat U/V coating on top for complete resistance from the extreme of temperature, weather & sunlight. etc. complete as per drawings, specifications and directions of Engineer-in-charge.
372	Providing and maintaining in operating condition brand new Single phase welding set with lead on Hire charges basis complete as required for completing the jobs daily.
373	Providing & Applying super bond of Ador or Norma of D&H secheren welding rod 2.5mm (Metal No.-6013) as Directed by the Engineer-in-Charge.
374	Providing & Applying of (LUNKER MAKE) High speed Hack blade (ISI marked) as Directed by the Engineer-in-Charge.
375	Providing & Fixing of M.S. Welded Mesh 6 mm x 6 mm size as Directed by the Engineer-in-Charge.
376	Providing and fixing concertina coil fencing with required dia 610mm (having 15 nos. round per 6 Metre length) up to 3m height of wall with existing angle iron ‘Y’ shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. stud tied with G.I. staples and G.I. clips to retain horizontal including necessary belts or G.I. barbed wire tied to angle iron all complete as per direction of Engineer-in-charge with reinforced barbed tape (R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/sq. mm with tape (0.52mm thick) and weight 43.47 gm/Metre (cost of M.S. angle, C.C. blocks shall be paid separately).
377	Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50 x 50mm made of G.I. wire of dia 4mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer – In charge.
378	Fencing with angle iron post placed at required distance, embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire 9.38 kg per 100 m (minimum) between the two posts filled and fixed with G.I. staples, turn buckles etc. complete.(cost of posts, struts, earth work and concrete to be paid for separately):- Payment to be made per meter cost of total length of barbed wire used. : With G.I. barded wire.
379	French sprit polishing two coat on old work after cleaning / scrubbing of surfaces with soft brushes & sand papers including the cost of materials, labour, cleaning of area after painting etc. complete as per direction of Engineer-in-Charge.
380	Providing & Applying Touchwood interior wood finish as Directed by the Engineer-in-Charge.
381	Providing & Applying ofASIAN Paint WOOD PRIMER PINK (0007 / GR-2)as Directed by the Engineer-in-Charge.
382	Providing & Applying of Thinner for General purpose Berger paint 800 as directed by Engineer-in-charge.
383	Providing & Applying of ASIAN / Nerolac Paint METAL PRIMER RED OXIDE (0005 / GR-0)as Directed by the Engineer-in-Charge.
384	Providing & Applying of Plaster of Paris as Directed by the Engineer-in-Charge.
385	Providing & Applying ofLIME (WHITING) as Directed by the Engineer-in-Charge.
386	Providiing & Mixing ofGreen or Blue Medium Shade Pigment and deposite in Civil Maintenance Store.
387	Providing & Applying of Anticorrosive BituminiousPaint (Black) as Directed by the Engineer-in-Charge.
388	Providing & Applying of Araldite as Directed by the Engineer-in-Charge.
389	Replacing the existing WC and providing & fixing New Anglo Indian WC of make \"HINDWARE\" or \"parry\" , CERRA OR JHONSAN as approved by EIC and depositing the old WC is store as per direction of Engineer In Charge .
390	Providing & Fixing of approvedbrand 100mm dia. C.P. Grating as Directed by the Engineer-in-Charge.
391	Providing & Fixing of C.I. grating for gully trapas Directed by the Engineer-in-Charge.
392	Providing & Applying Acrylic Polymer chemical for cracks for interiors as Directed by the Engineer-in-Charge.
393	Providing and fixing glass / pvc strips in joints of terrazzo/ cement concrete floors: 40 mm wide and 4 mm thick including finishing & curing work at all level etc. complete as per direction of Engineer-in-charge
394	Providing & Stacking of ordinary portland cement of 43 grade (OPC -43) confirming to relevent IS code and deposited in civil maintenance store along with voucher. (Note - Test certificate of cement obtained from the manufacturer shall be submitted for a qty. more than 1.0 MT brought).
395	Providing & Stacking of white cement conforming to relevent IS code as Directed by the Engineer-in-Charge.
396	Providing & Spreding of good quality crusher aggregate 20mm down gauge as Directed by the Engineer-in-Charge.
397	Providing & depositing of screened river sand / manufactured sand suitable for concrete/ masonary/ plaster works as approved as Directed by the Engineer-in-Charge.
398	Providing & Stacking of good quality bricks 230 x 115 x 75 mm size as approved as Directed by the Engineer-in-Charge.
399	Providing and fixing of approved quality 18mm thick black granite stone of size about - 1200 mm x 750 mm with nomenclature as per standered prectice, specification and as per direction of EIC.
400	Providing and fixing of Cinch Anhor/ Anchor fastner, Screw headed / sunken / Capstan headed bolts alongwith washer of following sizes as approved by the Engineer.
401	M-8
402	M-10
403	M-12
404	M-16
405	Dismantling Stone Slab Flooring laid in Cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 Metres leadas per direction of engineer in charge.
406	Demolishing stone rubble masonry manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge In cement mortar.
407	Demolishing cement concrete manually by mechanical means including disposal of materials within 50 metres lead as per direction of engineer in charge, 1:3:6 or richer mix.
408	Dismantling of any type plaster Inside & Outside in Cement Plaster including disposal of Unserviceable material Withing 1.0 KM Lead.
409	Dismantling roofing including ridges, hips valleys and gutters etc, and stacking the material within 50 meters lead of: G.S. Sheet.
410	Providing & Fixing of approved quality Agro shading net of NETLON make of 50% perforation for covering of green house for ornamental plants in nursery as Directed by the Engineer-in-Charge.
411	Providing & Appliying of Fresh Liquied Handwash (Santoor Gentle Handwash/Dettol/Perl/Lifeboye etc.)as Directed by the Engineer-in-Charge.
412	Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete.
413	Providing and fixing retro-reflective Cautionary, Mandatory & Informatory sign boards of required size and shape made out of 2 mm thick aluminum sheet face to be fully covered with high intensity encapsulated lens type retro-reflective sheeting, Letters symbols, borders etc. will beas per IRC : 67 with required colors scheme on the boards and with the high intensity grade A as per specification and as approved by Engineer In charge.Note: Structural steel support of specified configuration as required for installing sign - boards shall be paid separately under relevant items.
414	Providing and applying 2.5 mm thick road marking strips (retro- reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications.
415	Accomplishing the task of movement of materials, documents etc.,on all working days on daily basis by engaging minimum number of courier cum rigger (Un Skilled) as specified in the conditions of contract.
416	Accomplishing the task of Fitter cum Welding related works (Skilled) like cutting, bending, fixing and welding of metals as per desired pattern / drawing or repairing of existing buildings and structures, doors & windows and furniture and all other types of complaints received from residents and offices at R.R. Site colonies with all required tools & plants but excluding welding machine and consumables which will be supplied by NPCIL, by engaging the minimum required fitter cum welders as specified in conditions of contract, complete on all working days on daily basis. ( With all tools & tackles as required)
417	Accomplishing the task of Painting related works (Semi -skilled) like applying paints or polishing on new or repairing or repainting of existing buildings and structures, doors & windows and furniture and all other types of complaints received from residents and offices at R.R. Site colonies with all required tools & tackles like Brush, putty plate, sprey roller etc.by engaging the minimum required painter as specified in conditions of contract, complete on all working days on daily basis.
418	Accomplishing the task of Carpentry works like making new or repairing of existing doors & windows and furniture and all other types of complaints received from residents and offices at R.R. Site colonies with all required tools & tackles as required by engaging the minimum required carpenters as specified in conditions of contract, complete on all working days on daily basis.
419	Accomplishing the task of Skilled worker Engineering assistance works in various Civil Engg., construction / maintenance works like supervision, taking measurement etc. as specified in conditions of contract & as directed by engineer-in-charge complete on all working days on daily basis. (atleast 2 year construction/Mainteance work exprience)
420	Accomplishing the task of Mason related works like laying new or repairing of existing buildings and structures including masonary, PCC / RCC works, plastering, pointing, finishings, floorings, leakages repairing and all other types of complaints received from residents and offices at R.R. Site colonies with all required tools & tackles by engaging the minimum required mason as specified in conditions of contract, complete on all working days on daily basis.
421	Accomplishing the task of Plumbing works like making new or repairing of existing water supply lines, sanitary fittings and fixtures, water outlets, leakages and all other types of complaints received from residents and offices at R.R. Site colonies with all required tools & tackles by engaging the minimum required plumbers as specified in conditions of contract & as directed by Engineer-In-Charge complete on all working days on daily basis.
422	Accomplishing the task of Store-keeping works in (Semi Skilled) various Civil Engg., construction / maintenance materials, recording book-keeping, ledgers as specified in conditions of contract, complete on all working days on daily basis.
423	Providing & fixing mineral glass wool based acoustic false ceiling tiles Armstrong or other similar approved make having NRC of 0.90 of size 595mm x 595mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main \"T\" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross \"T\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main \"T\" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross \"T\" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \"T\" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all Tsections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.
424	Providing & replacing mineral glass wool based acoustic false ceiling tiles Armstrong or other similar approved make having NRC of 0.90 of size 595mm x 595mm in true horizontal level complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.

Also Visit

Tenders

Rajasthan Tenders

Construction Tenders

Building Construction Tenders

Building Repair Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Biennial Contract For Repair-Maintenance Of Building And External Civil Infrastructure Work In Anupratap And Anutara Colonies At R.R. Site., Rawatbhata-Rajasthan

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Biennial Contract For Repair-Maintenance Of Building And External Civil Infrastructure Work In Anupratap And Anutara Colonies At R.R. Site., Rawatbhata-Rajasthan

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us