|
| 1 | Civil Works |
| 2 | Dismantling wood work of sectional area 40 Sq.cm. and above wrought, framed andfixedinframes,other framesandtrussesincluding stackingthe material within 50 m lead. |
| 3 | Dismantlingdoors,windows andclerestory windows(steelorwood) shutters including chowkhats, architrave, hold fasts etc complete and stcking within 50 m lead. a) Of area 3 Sq.m. and below |
| 4 | Dismantling GI sheet roofing including ridges, hips, valleys and gutters etc and stacking |
| 5 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 m lead. |
| 6 | Repairstoplasterinpatchesof2.50Sq.m.andunderincludingcuttingthe patchtopropershapeandpreparingandplasteringthesurfaceofthewalls completeincludingdisposalofrubbishtothedumpinggroundwithin50m lead. a) With cement mortar 1 : 4 (1 cement : 4 fine sand) |
| 7 | Providing corrugated G.I.sheet roofing fixed withgalvanised ironJ or L hooks, bolts & nuts 8 mm dia with bitumen and G.I. limpet washers or with G.I. limpet washers filledwithwhite leadcomplete,excluding the cost of purlins, raftersand trusses.b) 0.63 mm thick GI sheet |
| 8 | Providing ridges or hips 60 cm overall in plain G.I. sheet fixed with galvanised ironJ or Lhooks,bolts andnuts 8 mmdia.G.I.limpetandbitumen washers complete. b) 0.63 mm thick GI sheet |
| 9 | Removing dry or oil bound distemper by scrapping, sand papering and preparingthesurfacesmoothincludingnecessaryrepairstoscratchesetc. complete. |
| 10 | Distempering(oneormorecoats)withoilboundwashabledistemperof approved brand and manufacture and of required shade on old work to give an even shade. |
| 11 | Distempering(twoormorecoats)withoilboundwashabledistemperof approved brand and manufacture and of required shade on new work over and including a priming coat with distemper primer of approved brand andmanufacture to give an even shade. |
| 12 | Applying one coat of cement primer of approved brand and manufacture on wall surface. |
| 13 | Providingapprovedbestavailablelocalwood(Class-BII)workinframesof doors,windowsclerestorywindowsandotherframes,wroughtframedandfixed in position. |
| 14 | Providing best available local wood (Class - B II) work in frames of false ceiling, partitions and trusses etc, sawn and put up in position. |
| 15 | Providing and fixing panelled, glazed or panelled and glazed shutters for doors, windows and clerestory windows including aluminium butt hinges with necessary screws.a) 38mm thick best available local wood class - B |
| 16 | Providing and fixing 40 x 3 mm flat iron hold fasts 40 cm long including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embedding in cement concrete block 30 x 10 x 15 cm in 1 : 3 : 6 (1 cement : 3 sand : 6 hard stone chips 40 mm nominalsize) |
| 17 | Providingandfixing2.50cmthickapprovedlocalwoodeavesboards23cm wide with necessary mouldings etc. |
| 18 | Providing and fixing MS grills of required pattern in wooden frames of windowsetc with MS flat, square or round bars with round headed bolts and nuts or by screws. b) Ornamental grill. |
| 19 | Applyingprimingcoatwithreadymixedpinkprimerofapprovedbrandand manufacture on wood work complete. |
| 20 | Painting two or more coats (excluding priming coat) with superior ready mixed paint for wood work of approved brand and manufacture in all shades on newwork to give an even shade. |
| 21 | Painting (one or more coats) with superior ready mixed paint for wood work of approvedbrandandmanufactureinallshadesonoldworktogiveanevenshade. |
| 22 | Cement concrete flooring 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement. b)50 mm thick |
| 23 | Demolishingcementconcrete1:4:8orleanermixincludingdisposalof material within 50 m lead. |
| 24 | Providingandfixing4.0mmthickasbestorsplainsheetceilingofapproved qualitywithnecessarynailsetc.complete(frameworkforbasetobepaidseparately). |
| 25 | Loading and Unloading of Stone Boulder / Stone aggregates / Sand / Kanker/Moorum / Lime / Shingle / Earth / Excavated Rock and Kerb Stones by Manual Means for hill roads. |
| 26 | Loading and Unloading of Cement / Steel / Structural Steel / RC Pipe / Wooden Logs / Bricks / Bitumen and Timber etc, by Manual Means and Stacking for hill roads. |
| 27 | CostofHaulageExcludingLoadingandUnloadingonhillroads.Haulageof materialsbytipperexcludingcostofloading,unloadingandstacking.(i) Surfaced Road |
| 28 | CostofHaulageExcludingLoadingandUnloadingonhillroads.Haulageof materialsbytipperexcludingcostofloading,unloadingandstacking. (ii)Unsurfaced Graveled Road |
| 29 | Providing and fixing aluminum Tower bolts anodized or transparent or dyed to required color or shade with necessary screws etc complete (a) |
| 30 | Providing and fixing aluminum Tower bolts anodized or transparent or dyed to required color or shade with necessary screws etc complete ( c ) |
| 31 | Providing and fixing aluminum Handles anodised transparent or dyed to required color or shade with necessary screws etc complete.(a) |
| 32 | Providing and fixing aluminum Handles anodised transparent or dyed to required color or shade with necessary screws etc complete.( c ) |
| 33 | Providing and fixing plain, square edged wooden beading 38 mm x 12 mm section with screws of approved quality for ceiling (b) Local soft wood |
| 34 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc.as required. |
| 35 | Goup A |
| 36 | Group B |
| 37 | Group C |
| 38 | Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/recessed PVCconduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required |
| 39 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required. |
| 40 | 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 41 | 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 42 | 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 43 | Supplying and fixing of following sizes of PVC conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. |
| 44 | 20 mm |
| 45 | 25 mm |
| 46 | 32 mm |
| 47 | Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. asrequired. |
| 48 | 5/6 amps switch |
| 49 | 15/16 A switch |
| 50 | 3 pin 5/6 A socket outlet |
| 51 | 6 pin 15/16 A socket outlet |
| 52 | Supplying and fixing brass batten/ angle holder includingconnection etc. as required. |
| 53 | Supplying and fixing call bell/ buzzer suitable for singlephase, 230 V, complete as required. |
| 54 | Installation, testing and commissioning of pre-wired,fluorescent fitting / compact fluorescent fitting of all types,complete with all accessories and tube/lamp etc. directly onceiling/ wall, including connections with 1.5 sq. mm FRLSPVC insulated, copper conductor, single core cable andearthing etc. as required. |
| 55 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 56 | Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required |
| 57 | Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required. |
| 58 | 32 A TP&N |
| 59 | Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. |
| 60 | 100 A, 16 KA,TPMCCB |
| 61 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But withoutMCB/RCCB/Isolator) |
| 62 | 6 way double door |
| 63 | Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt asrequired. |
| 64 | Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. |
| 65 | Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm). |
| 66 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or inrecess for connections etc. as required. |
| 67 | Providing and fixing 6 SWG dia G.I. wire on surface or inrecess for loop earthing as required. |
| 68 | Providing and fixing 6 SWG dia G.I. wire on surface or inrecess for loop earthing as required. |
| 69 | Providing and fixing 50 mm dia X 3.2 metres G.I. pipe (including accessories) complete with 50 mm X 50 mm X 6 mm angle iron bracket on wall and 75 mm X 90 mm shackle insulator with straps for house service connection including painting the angle and flat iron with primer and finish paintetc. as required. |
| 70 | Suplying and fixing PVC board on surface or recess with suitable as erquired |
| 71 | 3 x 3 inch |
| 72 | 7 x 4 inch |
| 73 | 8 x 10 inch |
| 74 | 10 x 12 inch |
| 75 | supplying and fixing of LED bulb 10 - 15 watt |
| 76 | Supply of 1400 mm sweep ceiling fan |
| 77 | Providing and fixing of MS standard fan clamp for suspension of ceiling fan asrequired |
| 78 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But withoutMCB/RCCB/Isolator) |
| 79 | 4 WAY, Single Door |
| 80 | 4 way, Double door |
| 81 | Supplying and fixing 16sq mm Aluminium conductor cable |
