|
| 1 | Repair & Maintenance work of Residential Quarter No. C-4 |
| 2 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in Charge. |
| 3 | Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. |
| 4 | Dismantling tile work in floors and roofs laid in cement mortar includingstacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm |
| 5 | Demolishing Cement Concrete manually/ by mechanical means including disposal ofmaterial within 50 metres lead as per direction of Engineer-in-charge. Nominal Concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 8 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc.,complete. |
| 9 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 10 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 11 | 12 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) |
| 12 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick |
| 13 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.: Granite stone slab colour black, Cherry/Ruby red: Area of slab over 0.50 sqm |
| 14 | Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. |
| 15 | Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required: S.S. 1800 x 2400 mm |
| 16 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid |
| 17 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White |
| 18 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :15 mm nominal bore. |
| 19 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.15 mm nominal bore each |
| 20 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.15 mm nominal bore. |
| 21 | Providing and fixing C.P. two way bib cock of standard design complete for 15 mm nominal bore. |
| 22 | Providing and fixing Head with brass spendal & flanges etc complete for 15 mm nominal bore of reputed make. |
| 23 | Providing and fixing C.P. brass pillar cock (Swan neck) of standard design for.15 mm nominal bore. |
| 24 | Providing & fixing of table top/storage cupboard of size 30x27x16 inches (Aprx.) of W.P.C. board 18 mm thich, reputed makealong with all necessary S.S. fitting ,Glass Profile ,Zero or any other required size S.S. hinges,etc complete for providing platform for bowl type basin as directed by engineer incharge. (Drawing enclosed) |
| 25 | Providing & fixing kitchen shelf of size 6 x 2 x 1.5 feet made with 18 mm WPC board with 2 No. rack sliding shutter with glass/handle profile etc. complete |
| 26 | ProvidingGranite of colour black, cherry/ruby red 18 mm thick (slab area upto0.50 sqm). |
| 27 | Providing edge moulding to 18 mm thick granite stone counters, vanities etc. including machine polishing to edge to give high gloss finish etc complete as per design approved by Engineer in Charge. Granite work |
| 28 | Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete. |
| 29 | Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. |
| 30 | Providing and fixing S.S. towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms |
| 31 | Providing and fixing S.S. towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. |
| 32 | Providing and fixing bowl type wash basin of size 630x450 mm with 15 mm C.P. brass pillar taps Swan neck long size,S.S. bottle trap and other necessary fittings complete ,as directed by engineer incharge. |
| 33 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete |
| 34 | Providing and fixing Stainless Steel Cockroach Trap round 100 mm dia. |
| 35 | Health Faucet with 1.0 Mtrs long easy flex Tube in crome finish and wall hook. |
| 36 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :150 mm diameter |
| 37 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. |
| 38 | Providing and fixing of S. S. Jet Spray of reputed make. |
| 39 | Providing and fixing toilet paper holder. C. P. brass. |
| 40 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. |
| 41 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. |
| 42 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper |
| 43 | Providing & fixing Curtain rod/ Pelmet rodoflength 12 feet and of diameter 1 inch dia &SS make of reputed company. |
| 44 | Providing & fixing Curtain rod Bracketof size 1 inch dia of reputed company. |
| 45 | Providing & fixing4 inches SS Hingesof reputed company. |
| 46 | Providing & fixing Central lock , 3 leaver ISI mark of Standerd company. |
| 47 | Providing & fixing Tower bolt 8 inchesS S of reputed make. |
| 48 | Providing & fixing L- drop12 inches - S S of reputed make. |
| 49 | Providing & fixing Latch 8 inchesS S of reputed make. |
| 50 | Providing & fixing Cupboard lock with three numbers key of reputed make. |
| 51 | Providing & fixing panlled wooden doorshutterofsize 2x6 feet each (total 2 Nos.) and 32 mm thick made of 2nd class teak wood with all necessary fixtures such as hinges, Handle, tower bolt, L- drop & stopper etc complete with wood primer & synthetic enamel paint on door shutteras directed by Engineer in charge. |
| 52 | Providing & fixing unbrakable acryli corner wall shelves/ set/ shelf/ storage for bathroom ( Clear 9 inch, 11 inch, 13 inch ) white matte of three pices, set. |
| 53 | Providing & fixing 1 mm thick plain fibre sheet with G I wire on sun shedat roof terrace including removing of old sheet. |
| 54 | Grinding work on mosaic tile flooring including all material complete excluding electric power charges. |
| 55 | Providing & fixing Modular switch 6 Amp reputed makeand ISI mark |
| 56 | Providing & fixing Modular switch 16 Amp reputed makeand ISI mark |
| 57 | Providing & fixing Modular socket6 Ampreputed makeand ISI mark |
| 58 | Providing & fixing Modular socket16 Ampreputed makeand ISI mark |
| 59 | Providing & fixing 2- module plate with metalbox inclusive of wiring for switch & socket andremoving of old box/ plat & switch socket wiring. |
| 60 | Providing & fixing 3- module plate with metalbox inclusive of wiring for switch & socket andremoving of old box/ plat & switch socket wiring. |
| 61 | Providing & fixing 4- module plate with metalbox inclusive of wiring for switch & socket andremoving of old box/ plat & switch socket wiring. |
| 62 | Providing & fixing 6- module plate with metalbox inclusive of wiring for switch & socket andremoving of old box/ plat & switch socket wiring. |
| 63 | Providing & fixing 8- module plate with metalbox inclusive of wiring for switch & socket andremoving of old box/ plat & switch socket wiring. |
| 64 | Providing & fixing 12- module plate with metalbox inclusive of wiring for switch & socket andremoving of old box/ plat & switch socket wiring. |
| 65 | Providing & fixing bell switch ofreputed makeand ISI mark. |
| 66 | Providing & fixingTwo way switch, reputed makeand ISI mark |
| 67 | Providing & fixingLED Tube light -20 Wattof reputed make and ISI mark. |
| 68 | Providing & fixing Ceiling Fan 1200 mmwith electronicregulator of reputed makeand ISI mark |
| 69 | Providing & fixing ExhastFan of size 9 \" dia made of iron body with all necessary fittings, reputed makeand ISI mark |
| 70 | Providing & fixing Geyser of 25 litcapacity with auto off system of reputed make and ISI mark. |
| 71 | Providing & fixing L.E.D. Gate light with 9 watt L.E.D. lamp of reputedmake and ISI mark. |
| 72 | Providing & fixingPVC Angle Holder reputed makeand ISI mark |
| 73 | Providing & fixing Modular 16 Amp socket with box, reputed makeand ISI mark (for geyser /A.C.) |
| 74 | Providing & fixingL.E. D. Box light for outer wall with 9 watt lamp, reputed makeand ISI mark |
| 75 | Providing & fixingLED bulb 9Wattof reputed make and ISI mark. |
| 76 | Opening & refitting of chamber cover with collar of size 053 m internal dia & height 0.15 mtr, including all material & labour complete to meet the flooring surface. |
| 77 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. |
| 78 | Providing & Fixing of Iron cover of size 2.10 x 2.10 m andmade of 1 mm thick M.S. sheet, iron angle of section 35 x35 x5 mmwithall fitting & fixtures etc complete and as directed by Engineer in charge. |
| 79 | Removing dry or oil bound distemper , water proofing cement paint and the like by scrapping , sand papering and preparing the surface smoth including necessary repairs to scratches etc complete . |
| 80 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm |
| 81 | Finishing walls with Acrylic Smooth exterior paint of required shade :Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface |
| 82 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture |
| 83 | French spirit polishing : Two or more coats on new works including a coat of wood filler |
| 84 | Painting (two or more coats) on rain water, soil waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour over a priming coat of approved steel primer on new work. 100 mm diameter pipes |
| 85 | Painting (two or more coats) on rain water, soil waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour over a priming coat of approved steel primer on new work. 150 mm diameter pipes |
