|
| 1 | CIVIL WORKS Earthwork in excavation of foundation in hard soil with all leads and lifts including dressing the sides and levelling the bed of the foundationincluding cost of all labourrequired for the work etc. complete with all other machineries required for the work and stacking the excavated materials away from the working area as directed by the Engineer-in-Charge. (GROUND FLOOR) |
| 2 | COMPOUND WALL |
| 3 | C.C Road |
| 4 | Supplying and filling foundation and plinth with sand well watered & rammed with cost, conveyance, royalty and taxes of all materials labour required for the work as per specification anddirection of the Engineer-in-Charge. |
| 5 | COMPOUND WALL |
| 6 | C.C Road |
| 7 | Providing Cement Concrete (1:4:8) in foundation with 4cm nominal size of hand broken hard granite metal of approved quality from approved quarry including hoisting, lowering, and laying in postition in layers not exceeding 150mm. thick with proper packing and ramming to proper slope and level including watering, curing with cost, conveyance, royality, taxes, labour, T&P and all other materials required for the work, finishing the exposed surface smooth, providing grooves and beads where ever necessary etc. complete in all respect as per the specification andas per direction of the Engineer-in-Charge |
| 8 | COMPOUND WALL |
| 9 | Providing cement concrete M10 (1:3:6) using 40 mm HG Metal in luding cost conveyance of all material,ramming with rammers |
| 10 | C.C Road |
| 11 | Fly ash brick work in cement mortar (1:6) after immersing brick for six hours in water before use in foundation with good quality of fly ash. brick of 25cm x 12cm x 8cm size having compressive strength not less than 35Kg. Per Sqcm. Including splays cutting, circular moulding and similar such type of work with necessary projections chamfering curbelling including watering and curing etc. complete including cost, conveyance, royality taxes of all materials and all labour T&P required for the workcomplete as per specification and direction of the Engineer-in-charge. |
| 12 | COMPOUND WALL |
| 13 | R.C.C. work M-25 having a minimum compressive strength(in work test) 250 Kg/cm.2 in 15cm cubes at 28 days after mixing and tests conducted in accordance with I.S. 456 and I.S.516 using 12mm to 20mm size black hard crusher broken granite chips of approved quality from approved quarry including hoisting, lowering laying and compacting concrete, watering and curing for 28days centering, shuttering, finishing the exposed surfacs inculding ceiling, smooth, providing grooves beads where necessary and providing, required No of fan Hooks as directed including, cost, conveyance, royalities and taxes of all materials and cost, of alllabour and T & P required for the work etc. complete in all respectas per direction of the Engineer-in-Charge but excluding the cost of M.S.Rods or Tor steel and binding wire and labour charges for bending, binding and tying grills.GROUND FLOOR [R.C.C In Sub Structer] (A) Column base & footing |
| 14 | (B) Column Upto Plinth Level |
| 15 | (C) Column Upto Roof Level |
| 16 | (D) Plinth Beam |
| 17 | (E) Lintel Band |
| 18 | (F) Chajja |
| 19 | (G) Roof Slab |
| 20 | (H) Shelf |
| 21 | (I) Stair Case |
| 22 | 1ST FLOOR (A) Column & Beam |
| 23 | (B) Plinth Band |
| 24 | (C) Lintel Band |
| 25 | (D) Chaja |
| 26 | (E) Roof Slab |
| 27 | COMPOUND WALL [R.C.C In Sub Structer]Gate Column |
| 28 | COMPOUND WALL [R.C.C In Super- Structer] |
| 29 | Cutting, streightening the bent up M.S./TSRodsbending, binding, welding, jointing if necessary and tying the grills and placing in position, as required for R.C.C work and for providing required No. of Fan Hooks hoisting, lowering, laying including, cost, conveyance, taxes of all M.S. Rods or Tor steel and binding wires of 118 to 20 gauge required for the work bending, binding and tying the grills in all floors (Payment will be made on weight of M.S. Rods or Tor steel only and no separate payment will be made towards the weight of binding wires)as per direction of the Engineer-in-Charge. (GROUND FLOOR) |
| 30 | 1ST FLOOR |
| 31 | COMPOUND WALL |
| 32 | Fly ash brick work in cement mortar (1:6) after immersing brick for six hours in water before use in Superstructure with good quality of fly ash. brick of 25cm x 12cm x 8cm size having compressive strength not less than 35Kg. Per Sqcm. Including splays cutting, circular moulding and similar such type of work with necessary projections chamfering curbelling including watering and curing etc. complete including cost, conveyance, royality taxes of all materials and all labour T&P required for the workcomplete as per specification and direction of the Engineer-in-charge. |
| 33 | 1ST FLOOR |
| 34 | COMPOUND WALL |
| 35 | 16 mm thick cement plaster(1:6) over brick massonary finished smooth, after racking out the joints including watering, and curing with cost, conveyance, royalities and taxes of all materials, and cost of all labour and T & P required for the work completeas directed by the Engineer-in-Charge |
| 36 | 1ST FLOOR |
| 37 | COMPOUND WALL |
| 38 | 12 mm thick cement plaster(1:6) over brick massonary finished smooth, after racking out the joints including watering, and curing with cost, conveyance, royalities and taxes of all materials, and cost of all labour and T & P required for the work completeas directed by the Engineer-in-Charge |
| 39 | 1ST FLOOR |
| 40 | Fixingvertifiedfloor tiles having size(60cm X 60cm) in floors treads or steps on 25 mm thick bed of cement morta (1:1) with neat cement sluryetc |
| 41 | Fixingwall tile in dados risers or steps on 12 mm thick bed of cement morta (1:3) with neat cement sluryusing 20cmx30cm wall tile etc. |
| 42 | Fixingchequred tiles on 12 mm thick bed of cement morta (1:3) with neat cement slury etc. |
| 43 | Priming one coat with any approved primer over new plaster surface including cost of cement with all cost, conveyance royalty taxes of all materials and all labour T&P required for the work including 1 % CESS etc complete as per direction of the Engineer-in-charge. |
| 44 | 1ST FLOOR |
| 45 | Finishing surface of walls with cement based wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding, staging charges with cost of all materials taxes, labour T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 46 | Distempering two coats to wall with approved distemper of approved shade including cost, conveyance& taxes of all material, labour etc complete as per specification and direction of the Engineer-in-charge. |
| 47 | 1ST FLOOR |
| 48 | Priming one coat with any approved primer over new plaster surface including cost of cement with all cost, conveyance royalty taxes of all materials and all labour T&P required for the work including 1 % CESS etc complete as per direction of the Engineer-in-charge. |
| 49 | COMPOUND WALL |
| 50 | Finishing walls with weather coat of approved shade on new work two coat over acoat of primer to give an even shade including costof all materials, labour charges, T&P etc required for the work complete. . as per direction of the Engineer-in-charge. |
| 51 | 1ST FLOOR |
| 52 | COMPOUND WALL |
| 53 | Providing cement concrete(1:2:4) having a minimum compressive strength(in work test) 150 Kg/cm.2 in 15cm cubes at 28 days after mixing and tests conducted in accordance with I.S. 456 and I.S.516 using 12mm to 20mm size black hard crusher broken granite chips of approved quality from approved quarry including hoisting, lowering laying and compacting concrete, watering and curing for 28days etc complete including cess @ 1%. |
| 54 | C.C Road |
| 55 | Providing , fitting & fixing Steel Angle Irondoors & windowsframe with M.S grill manufactured from standard rolled steel angle section 50 mm X 50 mm X 6 mmcornered of the frame duly metered and electrically welded with fish tail hold fasts made out of M.S flats of size 200 mm X 50 mm X 30 mm wide & 5 mm thick at the rate of 4 nos per frame with M.S hinges of size 75 mm & 14 SWG thick at the rate of 3 nos for each single leaf shutter tower bolt ring & M.S Grills made out of 19 mm x 5 mm flat properly welded to the window frame with one coatof anti corrosive red oxide zinc chrome primere as per direction of Engineer - in - Charge 1% cess and 12% GST . |
| 56 | 1ST FLOOR |
| 57 | COMPOUND WALL |
| 58 | Supplying fitting and fixing of stainless steel of 304 grade in hand railing using 50 mm dia of 2 mm thick circular pipe with Balustrade of size 32 mm x 32 mm x 2 mmetc complete. |
| 59 | 1ST FLOOR |
| 60 | Painting twocoats with approved paint over a coat of primer of any approved shade with cost, conveyance, taxes of all materials, all labour and T&P required for the work including the cost of primer all other materials aetc completeas per direction of the Engineer-in-Charge |
| 61 | 1ST FLOOR |
| 62 | COMPOUND WALL |
| 63 | 20 mm thick C.P in CM ( 1:4) in grading plaster including cost of all labour , material etc complete including 1 % cess. (1st Floor) |
| 64 | 2.5cm Damp proof course with CC (1:2:4 ) using 12mm size chips including 1% cess etc. complete. (Compound Wall) |
| 65 | P.H. WORKS Earth work in all kinds of soil in excavation of foundation trenches within 50 m initial lead including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding o.30 in depth and as per direction of E.I.C .-Initial lift up to 1.50m |
| 66 | 2nd depth upt 3.00 mtr |
| 67 | Supplying all materials, labour T&P and filling in F&P with river sandwell watered and rammed including conveyance of all materials to worksite payment of royalty, taxes etc. all complete as per direction of E.I.C. |
| 68 | Supplying all materials, labour T&Pand providing c.c (1:3:6) using 4cm h.g. metal including watering, curing, coveyance of all materials to worksite payment of royalty, taxes etc. all complete as per specification and direction of E.I.C. |
| 69 | Supplying all materials, labour T&Pand providing c.c (1:1.5:3) using 12 mm h.g. chips including watering, curing, coveyance of all materials to worksite payment of royalty, taxes etc. all complete as per specification and direction of E.I.C. |
| 70 | Supplying all materials, labour, T&P and providing brick work with Fly Ash bricks 25cmx12cmx8cm size having cs. not less than 75kg / cm2 with dimensional tolerance ± 8% inincluding watering,curing conveyance of all materials to worksite, payment of royalty taxes etc. all complete as per specification and direction of EIC. --In Foundation & Plinth in CM (1:4) |
| 71 | Supplying all materials, labour, T &P and providing C.C (1:1.5 :3 ) using 12mm h.g. chips for R.C.C. works including hoisting, laying, watering, curing, conveyance of all materials to worksite, curing, conveyance of all materials to worksite, payment of royalty, taxes etc, all complete as per specification and direction of E.I.C. |
| 72 | Supplying all materials, labour, T&P and providing M.S. reinforcement for R.C.C. works including cutting, bending, binding and tying the grills and placing in position including cost of binding wire18 to 20 gauge, conveyance of all materials to worksite etc. complete as per directio n of E.I.C. |
| 73 | Supplying all materials, labour, T&P and providingrigid & smooth centering & shuttering for R.C.C.works including false work and dismantling them after casting including conveyance of all material, to worksite, payment of royalty, taxes etc. all complete as per direction of E..I.C.-R.C.C.Slab |
| 74 | Supplying all materials, labour, T&P and providing cement plaster on brick/stone work including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per specification and direction of E.I.C.--12mm thick C.P with C.M. (1:4) |
| 75 | 12mm thick C.P with C.M. (1:3) |
| 76 | Supplying all materials, labour, T&P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per specification and direction of E.I.C. |
| 77 | Supplying all materials, labour, T&P and providing cement flush pointing to brick masonary (1:3) including watering, curing conveyance of all materials to work site, payment of royality, taxes etc. all complete as per direction of E.I.C. |
| 78 | Supplying all labour, materials T&P andfixing ofR.C.C. Baffle wallpre-cast with C.C. (1:1.5:3) using 12 mm b.h.g. chips and fitted to septic tank as per P.H. Specification and direction of E.I.C. |
| 79 | Supplying all materials, labour, T&PProviding and fixing PVC Tee in all including supply of all jointging materials etc. all complete materialsto as per specification and direction of E.I.C.- 110mm x110mm x110mm PVC Tee |
| 80 | Supplying all materials, labour, T&P and providing pre-cast R.C.C. Manhole cover with C.C. ( 1:1.5:3) of 12 MM h. g. chips including conveyance of all materials to site after payment of royality and taxes etc.all complete as per PH.Specification and direction of EIC |
| 81 | Supplying all labour, materials T&P and fixing of M.S.Step iron in 12mm dia M.S. SteelBar and fixing into walls of septic tank duly embeded in C.C (1:3:6) all complete as per P.H. Specification and direction of E.I.C. |
| 82 | Filling F&P with excavated materials, including watering and ramming as per direction of E.I.C. |
| 83 | Supplying all materials labour T&P and fixing Ceramic tiles in floors. Treads and landing on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigments to match the3 shades of the tiles including rub bins and dir of Engineer-in-charge. |
| 84 | Supplying all materials, labour T&Pand fixing porcelain glazed tilesin dados skirting, on 12mm thick C.P. (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per direction of Engineer-in-Charge.- |
| 85 | Providing fitting fixing Al door with anodized Al door section of 9202 as vertical member, 9201 as top, 9200 as bottom and middle member with frame section as 9221 with tapered clip no 4660 and frame to be completed by means of jointing angle no 1855 including cost of labour T&P hire charges of drilling machine labour charges etc complete with cost of laminated board.and as per direction of the Engineer in charge. |
| 86 | Supplying all materials, labour T&Pand fixing water closet, (Orissa pattern squating pan) duly embeded in c.c. (1:5:10) using 4cm h.g. metal all complete as per direction of E.I.C.--(583x440)mm Orissa pan (Cerra/ Parry ware/ Hindware) |
| 87 | Supplying all materials, labour T&P and fixing Wash Down Water Closet(European type W.C. pan) with Integral ‘S’ or ‘P’ trap to the floor with wooden plug and C.P.screws including jointing the trap with soil pipe in C.M.(1:1) etc. all complete as per specification & direction of E.I.C-One Piece EWC withsoft Closed Seat Cover and Flush fittings with S\" Trap- [Parryware/ Hindware] |
| 88 | Supplying all materials, labour T&P and fixing Wash Down Water Closet(European type W.C. pan) with Integral ‘S’ or ‘P’ trap to the floor with wooden plug and C.P.screws including jointing the trap with soil pipe in C.M.(1:1) etc. all complete as per specification & direction of E.I.C-- E.W.C. with \"P\"/ ‘S’ trap Plain(Cerra/ Parry ware/ Hindware) |
| 89 | Supplying all materials, labour, T&P fitting and fixing Plastic Seat and cover for E.W.C. with chromium plated brass hinges and rubber buffers all complete as perr specification and direction of E.I.C. (Neycer/ Cerra/Parry ware/ Hindware) |
| 90 | Supplying all materials, labour T&P and fitting & fixing SWR ventilating pipes and fittings of the following O.D conforming to ISI No. 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method as per manufacturer’s specification, testing, e.w. in excavation in all kinds of soil and refilling of trenches as per direction of E.I.C.-110 mm dia SWRPipes |
| 91 | 110 mm dia SWR P’ Trap |
| 92 | 110 mm dia PVC SWR Door Cross Tee |
| 93 | 110 mm dia PVC SWR Door Tee |
| 94 | 110 mm dia SWR Door Bend |
| 95 | 110 mm dia SWR Plain Bend |
| 96 | 110 mm dia SWR Cowl |
| 97 | 110 mm dia SWR Offset |
| 98 | 125 mm dia C.P.grating |
| 99 | 75 mm dia SWRPipes |
| 100 | 75 mm dia SWRPlain bend |
| 101 | 75 mm dia SWRDoor bend |
| 102 | Supplying all materials, labour T&Pand cutting holes through brick/stone masonary walls for taking PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of E.I.C. -- 250 mm thick wall |
| 103 | Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with C.I/M.S brackets painted white including holes in walls and making good the damages etc. all complete as per P.H specification and direction of E.I.C.-- 550mm x 400mm WHB with all Fittings with C.P. Waste, PVC Waste Pipe & Connection Pipe. (Cerra/ Parry ware/ Hindware) |
| 104 | Supplying all materials, labour T&P and fixing padestrial for wash basin complete recessed at the back for the reception of pipe and fitting etc. all complete as per specification and direction of E.I.C. (Neycer/Parrywear/Cerra/Hindware) |
| 105 | Supplying all materials, labour T&P and fixing mirror of superior glass mounted on 6mm thick plywood sheet and fixed to wooden plugs with C.P screws and washers complete as per P.H specification and direction of E.I.C.--600mm x 450mm B.E.Mirror (fixed type) |
| 106 | Supplying all materials, labour T&Pand fixing standard size C.P. towel rail / ring complete with c.p. brass brackets fixed to wooden plugs with c.p screws as per P.H specification and direction of E.I.C.-- 20 mm x 600 mm long C.P Towel rail |
| 107 | C.P. Towel Ring (St.) |
| 108 | Supplying all materials, labour T&Pand fixing standard size C.P. soap holder complete with c.p brass brackets fixed to wooden plugs with cp screws as per PH specification and direction of E.I.CC.P.Soap Holder. |
| 109 | Supplying all , labour T&P and fitting, fixing of standard size Glass shelf with CP brass bracket and guard rails complete fixed to wooden plugs with CP screw as per specification and direction of E.I.C --450x125mm size Plate Acrylic Shelf |
| 110 | Supplying all labour, T&P, materials & fixing wash Kitchen sinkwith M.S brackets painted white including holes in walls and making good the damages etc. all complete as per P.H specification and direction of E.I.C. -- 600mm x 450mm x 200mm Stainless Steel sink.[Including C.P. Waste & PVC Waste Pipe] |
| 111 | Supplying all materials, labour T&Pand costructing gully trap chamber of the following inside size with 8cm thick R.C.C. precast cover slab in c.c. (1:1 1.5:3) using 12 mmsize h.g. chips foundation concrete (1:3:6) using 40 mm size h.g. metal on bed and arround trap Fly Ash brick work in c.m. (1:6) in F&P and inside 12mm thick c.p (1:3) finished with a floating coat of neat cement including fixing 100mm size H.C.I gully trap and grating etc. all complete as per approved drawing, specification and direction of E.I.C. Inside size 250mm x 250mm gully trap Chamber |
| 112 | Supplying all materials, labour T&Pand constructing Inspection chamber of the following sizes with c.c (1:3:6) using 40mm size h.g. metal on bed, Ist class Fly Ash brickwork in c.m (1:6), moulding and shaping the channel inside andbenching with c.c. (1:11/2:3) using 12mm size h.g. chips 12mm thick c.p. (1:3) with punning to inside cement flush pointing (1:3) to outside R.C.C. cover slab in c.c. (1:11/2:3) using 12 mm size h.g. chips with R.C.C. m.h. cover, e.w. in excavation in all kinds of soil and refilling the cavity arroundthe chamber including watering, curing, conveyance of all materials to site payment of royalty, taxes etc. all complete as per approved specification and direction of the E.I.C. Inside size 760mm x 760mm x 460mmI.C. |
| 113 | Supplying all materials, labour, T&P and laying 110 mm diaSWR pipes of the following O.D conforming to IS No. 13592 and aligning to requisite gradient inside the trench encasingall round of the pipe with c.c (1:3:6) using 4 CM size h.g. metal and CC(1:3:6) with 4CM size h.g. metal in the bed of the trench including lowering the pipes to the bed of the trench, earth excavation in trenches in all kinds of soil, refilling the same in layer of 0.3 mtrs with watering and ramming, removing of surplus earth, testing of sewerage line including use of T&P as per PH Specification and direction of E.I.C.- 110 mm dia SWR Pipe Sewerage line with all round encasing (conforming to IS No. 13592) |
| 114 | Supplying all materials, labour T&Pand constructingsoak way pit of the following sizes with dry brick walling form bottom up to invert of inlet pipe and 1st class Fly Ash brickwork in c.m(1:6) for the remaining height at top, 12 mm thick c.p(1:4) inside and outside over masonary brickwork gravel packing in the rear of well steining R.C.C. cover slab in c.c (1:11/2:3) using 12mm size h.g. chips fitted with iron lifting handles including e.w. in open well excavation in stoney earth and refilling the cavity around the pit & painting the iron works, watering , curing, conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per approved drawing, specification and direction of E.I.C.- Inside size- 1.20mtrs.dia x 2.0mtr.deep soak way pit |
| 115 | Inside size- 1.00mtrs.dia x 2.0mtr.deep soak way pit |
| 116 | Supplying all materials labour, T&P and constructing RCC Ringpit of the following sizes with precast RCC rings joined loose gravel backing in the rear of well staining, precast RCC cover slab in c.c. (1:2:4) USING 2mm size hg chips fitted with iron lifting handles including e. w. in open well excavation in all kinds of soil and refilling the cavity around the pit and painting the iron works watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per approved drawing, specification and direction of EIC.1.20m dia x 2.10m deep RCC RingPit |
| 117 | Supplying all materials, labour, T&P and fixing rotational moulded polyethylene cylindrical vertical waterstorage tank confirming to IS 12701- 1996 including cutting hole through the tank and fixing MS tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting the tankand placing the tankto the required position including all complete as per specification and direction of EIC.(including cost of FG Over Head Tank) -- 1000 Ltrs. Capacity F.G.Over Head Tank. (on roof of Gr. floor) |
| 118 | Supplying all materials, labour, T&P and Construction of masonary stagging with providing 1st class Fly Ash brick work in c.m, (1:6) of 0.46m. height in staging and in circular protection wall to support the tank in roof of ground floor using 25cm x 12cm x 8cm size Fly Ash bricks having crushing strength not less than 75 kg/cm2 12mm thick c.p.(1:4) over brick work, R.C.C. Slab of size 1.60mtr xl.60mtr x0.l0mtr thick, R.C.C. beam of size 0.25m x 0.30m and 2.60m average length in c.c.(1:1.5:3) using 12mm size h.g. chips including centering and shuttering, watering, curing conveyance of all materials to work site etc. all complete as per specification and direction of E.I.C-- For 1000 Ltr. Capacity Over Head Tank(on roof of Gr. floor) |
| 119 | Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor PVC Pipes conforming to ASTM-D-1785/89(sch-40/80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor testing all complete as per specification and direction of E.I.C - 20 mm dia PVC (ASTM) Pipe [Internal] |
| 120 | 25 mm dia PVC (ASTM) Pipe[Internal] |
| 121 | 25 mm dia PVC(ASTM) Pipe) [External] |
| 122 | 32 mm dia PVC(ASTM) Pipe) [External] |
| 123 | 32 mm dia HDPE Pipe [Inside Tube Well] |
| 124 | 32 mm dia HDPE Pipe [External Including E/W] |
| 125 | Supplying all materials, labour, T&P and cutting holes through brick/stone masonary works including making good the damages in c.m. (1:4) for taking P.V.C. pipes & fittings etc. all complete as per P.H. specification and direction of E.I.C. |
| 126 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages as per direction of the E.I.C. |
| 127 | Supplying all materials, labour, T&P and fitting & fixing brass /C.P. fittings of the following nominal bore with supply of all jointing materials etc. complete as per P.H. specification and direction of E.I.C.- 15 mm dia C .P S.B. Bib Cock [Jaquar] |
| 128 | 15 mm dia C .P L.B. Bib Cock[Jaquar] |
| 129 | 20 mm dia C .P (c) Stop Cock[Jaquar] |
| 130 | 15 mm dia C .P Angle Stop Cock[Jaquar] |
| 131 | 15 mm dia C .P Pillar Cock[Jaquar] |
| 132 | 15 mm dia C .P Pillar Cock Swan Neck [Jaquar] |
| 133 | 15mm dia C.P. Wall mixture (3-in-1) [Jaquar] |
| 134 | 15mm dia CP telephonic shower with PVC flexibel tube & hook [Jaquar] |
| 135 | 15mm dia C.P. Two Way Bib cok [Jaquar] |
| 136 | 15mm dia C.P. Health Faucet [Jaquar] |
| 137 | 15 mm dia C .P Extension Piece |
| 138 | 25 mm dia PVC Ball Valve [Metal Ball] |
| 139 | 32 mm dia PVC Ball Valve [Metal Ball] |
| 140 | Supplying all materials, labour, T&P and fitting and fixing C.P. shower with 15 mm or 20 mm inlet with C. P. shower arm including polishing all complete as per P.H. specification and direction of E.I.C [Jaquar] |
| 141 | Supplying all materials, labour T&P and fitting & fixing 10 Litres capacity low level cistern with a pair of cast iron of m.s. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float, c.p. brass handle, unions and couplings for connection with inlet, outlet and overflow pipe. 32 mm C.P flush bend 15mm PVC inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting inlet pipe with supply main etc. all complete as per specification and direction of E.I.C(Cerra/ Parry ware/ Hindware) |
| 142 | 125x100mm dia Tube Well through ODEX Method- Supplying all labour and drilling perfectly vertical bore holes in boulder formation areas with down the hole hammer drilling rigs or combination drilling rigs to suit the site condition with deployment of rig, necessary accessories and consumables for a specified depth below ground level including supply of necessary casing shoe, odex tools and plants jointing materials, extra sockets where rquired withdrawing of pipes, lowering the M.S (ERW) pipes and fitting and fixing in perfectly verticalposition including cutting and welding for jointing pipes for simultaneous casing lowering in over burden boulder formation till encounter of hard rock and to drill 125mm DTH upto the desired depth as may be necessary, clearing the site and washing bore etc., all complete providing sanitary sealing upto 5 meters depth below gound level as per the direction of Engineer-in-charge., - Labour for drilling of 125mm dia bore |
| 143 | Supplying of ISI Mark steel tubes used in water wells type electric resistance welded (ERW) confirming to 4270/2001 having inside the pipe Nominal bore of 125mm dia with wall thickness 5.4mm. |
| 144 | Labour for drillinga perfectly vertical bore hole of 100 mm dia for a specified depth below boulder zone through consolidated and unconsolidated rock with down the hole hammer drilling rigs or combination drilling rigs as requiredto suit the site condition as per the direction of Engineer-in-Charge including use of own rigs with its accessories, tools and plant and consuambles etc. |
| 145 | Cleaning and developing the tube well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well ibncluding supply and use of all necessary equipment and labour as per the direction of engineer-in-charge. |
| 146 | Supplying all materisl, labour, T & P and withdrawing casing pipe from the unsuccessful bore and depositing in the departmental store in good condition. |
| 147 | Supplying all labour, T&P and materials for fitting and fixing of India Mark-II Deep well Hand Pump with cast Iron cylinder, 12mm/16mm dia B.S. Connecting rod, 32mm dia G.I.Pipe of required lengths with supply of extra socket of approved make all complete including carriage, coveyanceas per direction of EIC |
| 148 | Supplyingall labour, T&P and materials for Construction of Cocrete Platform for India Mark-II Hand Pump as per I.S. Specification of 1.85 mtrOutside with Cement Concrete (1:2:4) with 12mm size hard granite C.B. chips etc. all complete including 760mmx760mmx400mm deep cement concrete embeded around the bore well pipeas per direction of Engineer-in-Charge. |
| 149 | Supplying all materials, labour, T&P and construction of 100mm wide waste water drain for India Mark-II Hand Pump platform as per UNICEF design and specification with C.C (1:2;4) using 12mm size hard granite crusher broken chips etc. all complete as per direction of Engineer-in-Charge. |
| 150 | Supplying of ISI mark 1.00 HP single phase vertical submersible pump set with discharge of 900-1000 ltr/hour and a head of 50-60 mtr of reputed make like KSB/Texmo & Equivalent including all cost, conveyance and taxes etc. all complete as per direction of E.I.C. |
| 151 | Supplying all labour T&P and fitting and fixing of 1.00HP single phase verticaql submersible pump set with commissioning and testing etc. all complete as per direction of EIC. |
| 152 | Supplying and fitting and fixing of ISI mark DOL starter of reputed make like BCH or equivalent for 1.00HP single phase submersible pump including all cost, conveayance and taxes etc. all complete as per direction of EIC. |
| 153 | Supplying and fitting and fixing of three core flat cable of ISI make of reputed company like BCH/Finolex or equivalent and connecting the pump and starter including all cost, conveyance and taxes etc. all complete as per direction of EIC. (2.5mm2) |
| 154 | Supplying and fitting and fixing jof plastic rope, MS well cover, MS clamp, stainless steel short piece, bend & socket including all cost, conveyance and taxes etc. all complete as per direction of EIC. |
| 155 | Supplying of ISI Mark 1.00 HP Single Phase HorizontalSubmersible Pump Set with discharge of 11700-1980 liter/hour at a head of 06-25 mtr of reputed make like KSB/Texmo & Equivalent including all cost , conveyance and taxes etc. all complte as per direction of Engineer-in-charge. |
| 156 | Supplying and fitting and fixing of ISI Mark DOL Starter of reputed make like BCH or Equivalent for 1.00 HP Single Phase Horizontal Submersible Pump including all cost, conveyance and taxes etc. all complete as per direction of Engineer-in-charge. |
| 157 | Supplying and fitting and fixing of three core flat cable (1.5mm2) of ISI Make of reputed company like BCH/Finolex or Equivalent and connecting the pump and starter including all cost, conveyance and taxes etc. all complete as per direction of Engineer-in-charge. |
| 158 | Supplying and fitting and fixing of Pump Set with Plastic Stool including supply of Nuts & Bolts and G.I. Fittings and hanging with plastic rope etc. All complete |
| 159 | Supplying all materials labour, T&P and constructing soak way pit of the following sizes with precast RCC rings joined loose gravel backing in the rear of well staining, precast RCC cover slab in c.c. (1:2:4) USING 2mm size hg chips fitted with iron lifting handles including e. w. in open well excavation in all kinds of soil and refilling the cavity around the pit and painting the iron works watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per approved drawing, specification and direction of EIC.0.91m dia x 2.10m deep RCC RingPit |
| 160 | E.I. WORKSRecessed wiring to light pointwith 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp,one way modularswitch ISI marked and ceiling rose ISI marked mounted on Modular G.I. box having front bakelite cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire - Polycab/Finolex/ L&T / Anchor / Havells / V Guard/ KEI/ Great White) Modular Type -do- (Gr.A) (1.1.1-1.24.2) |
| 161 | -do- (Gr.B) (1.1.2-1.24.2) |
| 162 | -do- (Gr.C) (1.1.3-1.24.2) |
| 163 | Recessed wiring to fan point in-do- (Gr.B) (1.1.2-1.24.2) |
| 164 | Recessed wiring to Exhaust fan point in-do- (Gr.C) (1.1.3-1.24.2) |
| 165 | Recessed wiring to Call bell point in-do- (Gr.C) (1.1.3-1.24.2) |
| 166 | S/F of M.S. Box with Bakelite cove for 2 Module 18 swg (1.24.2) |
| 167 | S/F of M.S. Box for 4 Module 18 swg (1.24.3) |
| 168 | S/F of M.S. Box for 8 Module 18 swg (1.24.5) |
| 169 | S/F of M.S. Box for 12 Module 18 swg (1.24.6) |
| 170 | S/F of 3 pin 5/6 A.F.T switch and.Socket on existing board (Modular type) (1.25.1+1.25.4) |
| 171 | S/Fof 6 module M.S. Box with Bakelite cover(Modular Type) on surface or in recess including providing and fixing of 2 nos3 pin 5/6 amp. Socket out let 5/6amp. Piano type modular switch,connection,painting etc. as required (1.24.4 +2 x (1.25.1+1.25.4) |
| 172 | S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of6 pin 15/16 amp. piano type Modularswitch & Socket, connection, painting etc as required |
| 173 | S/F of Power point with 2 modular metal box with modular base & cover in recess including providing and fixing of6 pin 15/16 amp. piano type Modular Socket, connection, painting etc as required for AC & Geyser |
| 174 | S/F of Power point with 2 modular metal box with modular base & cover in recess including providing and fixing of15/16 amp.Modular Switch, connection, painting etc as required for Geyser |
| 175 | S/F of following 2 way single pole and neutral sheet steel MCB 250 V on recessed complete with tinned coper bus bar , neutral bar, earth bar,din bar, detachable gland plate, inter connections, phospatized and powder painted including earthing etc. as required(but without MCB) 2 way single door(2.3.1b ) |
| 176 | S/F of following 16 way single pole and neutral sheet steel MCB 250 V on recessed complete with tinned coper bus bar , neutral bar, earth bar,din bar, detachable gland plate, inter connections, phospatized and powder painted including earthing etc. as required(but without MCB) 16 way double door(2.3.8 ) |
| 177 | S/F of \"C\" series DP MCB of 5 - 32A amp rating (As per direction of engineer in charge)240Volt for lighting and other loads in the existing Distribution board ISI marked complete with connection, testing and commissioning etc. as required(2.6.2a)Make L&T/Equivalent |
| 178 | S/F of A.C.Starter 20Amp with 2 module Box.(Make Havells/Equivalent) |
| 179 | Wiring for circuit/sub main alongwith earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20 mm dia non metallic heacy duty flexible conduit 1.6 mm in recessed PVC conduit as required (make of wire-Polycab/Finolex/L&T/Anchor/Havels/V-Guard/KEI/Great White).2x1.5 sqmm + 1 x 1.5 sqmm( 1 .8.1) |
| 180 | -do- 2 x 2.5 sqmm + 1 x 1.5 sqmm (1.8.2) |
| 181 | -do- 2x4 sqmm + 1 x 1.5 sqmm (1.8.3) |
| 182 | -do- 2x6 sqmm + 2 x 2.5 sqmm (1.8.4) |
| 183 | S/F of 63 Amp. ICDP Main Switches (IS13940 part 3/1993) of following Capacity on existing surface/wall mounting & complete with H.R.C fuse links, inter connections earthing etc as required as per direction of Engineer Incharge (Make-Seimens/HPL/Anchor/L&T /Havels/C&S/R. K.) 2.15A |
| 184 | Supply of 250 mm x 300 mm x100 mm deep(1.24.16) for fixing 63 Amp ICDP Main Switch. |
| 185 | S/F of 5 to 32 Amp rating 240 Volt \"B\" series MCB for lighting and other loads in the existing MCB Distribution Board ISI marked complete with connection, testing and commissioning etc. as required (2.6.1) |
| 186 | S/F of Cu. Earth Plate Earthing 600mmX600mmX3.15mm with Salt& Charcoal(3:5+3:6) |
| 187 | Supply & laying 8 SWG Cu . wire infor loop earthing as required (3.18) |
| 188 | S/F of extra down rod 20mm dia(1.41)(20CM) |
| 189 | S/F Call bell/Buzzer ISI marked suitable for DC/AC single Phase 230 volts complete as required.(1.30) |
| 190 | S/F of batten holder BK angle holder ISI marked including connection etc. insulated of ceiling rose(1.29- 1.28) |
| 191 | S/F of computer board consisting of 3 nos of 5amp modular plug and modular switch& 1 no of Mini MCB and indicator complete with wiring on 12 modularM.S. box with modularcover. |
| 192 | S/F of Fan hook S, Type on ceiling. |
| 193 | P/F of plain 16/0.2 mm T/T flexible cupper cable(1.31) |
| 194 | Fixing/I.T.C. of stepped type Modular regulator ( 1.25a ) |
| 195 | Supply of instalation, Testing commissioning of 15 Watt. LED bulb |
| 196 | Supply and fixing of300mm Exhust fan with all accessories and connections (Make:Usha-Aero Clean Plus DBB/Crompton- Trans Air 12\" reversiable /Havells-Venti Air DS (HS)/Anchor- Anmol delus R/Orient-Power Flow DBB// Pollycab -Fresh on DBB ) |
| 197 | Wiring to sub main with 1 x 1.5 sqmm single core multistrand copper wire for inverter wiring (1.9.1) |
| 198 | Supply and fixing of 1200mm A.C. Ceiling fan (5 star) 28 watt BLDC with all accessories and connections with out fan regulator (Make:Usha-Techinix ISI /Crompton- Energion Groove/Havells-Efficiencia Neo/ Anchor- Eco Breeze Urban/Orient-Eco Tech Supreme/ Pollycab -Affeciente Neo ) |
| 199 | S/F of 2350 VA Inverter with 2 nos. 150 Ah Tubular battery including trally arrangement (Make: Microtake/ Luminous/Exide) |
| 200 | S/F of1.5 ton5 star split type AC MachineMake - Carrier/Blue star/Hitachi/LG |
| 201 | S/F of Voltage Stabilizer (90-300V ) upto 1.5 Ton AC Make - ( Microtech/V -Guard ) |
| 202 | Supply & fixing of 10 watt LED bulk head fitting general domestic use ISI marked square / oval typeincluding necessary connections. ( M-5 ) |
| 203 | S/F of 18-25Watt L.E.D Tube light fittingwith all accessories and connections (Make:HPL/ Havells/PAC/Crompton/Polycab) |
| 204 | S/F of18W Recess Mount(Round/Square) Type Ceiling light (Havels/crompton/philips/panasonic) |
| 205 | Supply and fixing of 25Watt Single LED Street LightFitting with LED & Electronic driverwith all accessories and connections ( Make- Crompton/Phillips/HPL/Polycab/Havells) |
| 206 | Supply and fixing of 45-48Watt Single LED Street LightFitting with LED & Electronic driverwith all accessories and connections ( Make- Crompton/Phillips/HPL/Polycab/Havells) |
