|
| 1 | B/R WORKS |
| 2 | PCC type B-1 (1:2:4), using 20 mm graded stone aggregates as in kerb around chequered tiles and paver block and in coping, benching etc slightly rounded or chamfered on edge and throating, complete all as specified. |
| 3 | Reinforced cement concrete, type B-1,(1:2:4), (nominal mix) using 20 mm graded stone aggregates as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in kitchen shelves and the like complete all as specified. |
| 4 | Brick work using bricks as specified in PS clause 5.1, straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar (1:6), complete all as specified. |
| 5 | Brick work using bricks as specified in PS-II clause 5.1 straight or curved on plan to any radius in half brick thick wall, built in cement mortar (1:4),complete all as specified. |
| 6 | 35 mm thick ,2nd class hard woodGlazed and skeleton shutters, open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a);,etc complete all all as specified. |
| 7 | 35 mm thick, second class hard wood, plain framed, hammer marked, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete, all as specified. |
| 8 | Factory made solid PVC Door frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforcedwith mild steel square tube, suppling & fixing in opening, complete all as specified. |
| 9 | Factory made Solid PVC Moulded door Shutteras with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2 mm thick 3D wood grain moulded PVC sheet polyurethane painted on the front face and 2 mm prelam PVC sheeton back face complete all as shown on drawing and as specified |
| 10 | Aluminium anodised barrel tower bolt of extruded section 150mm long, ISI marked, complete all as specified. |
| 11 | Aluminium anodised barrel tower bolt of extruded section 200mm long, ISI marked, complete all as specified. |
| 12 | Aluminium alloy, anodised, ISI marked sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extrudedsections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy 200 mm long,complete all as specified. |
| 13 | Stainless steel 75mm long butt hinges with stainless steel screws, ISI marked complete all as specified. |
| 14 | Stainless steel 100mm long butt hinges with stainless steel screws, ISI marked complete all as specified. |
| 15 | Extruded aluminium anodised handles fabricated type with plate 150 mm long, ISI marked complete all as specified. |
| 16 | Double leg aluminium anodised door stopper with rubber foot, ISI marked and fixed to bottom rail of doors with steel screws, complete. |
| 17 | Aluminium (Die cast) door closer hydraulically regulated designation No. 3 aluminium body universal type suitable for door shutters of 851 to 1000 mm in width and weight between 61 to 80 kg, ISI marked, complete all as specified. |
| 18 | Stainless steel conduit 20 mm bore, cut to size and erected in position as curtain rod on backets, with & including SS decorative finials & brackets, PVC rings @ 10 nos. per metre, fixed to walls with PVC rawl plugs & SS screws,IN REPLACEMENT,all as specified.. |
| 19 | Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with tinned tacks or steel wire staples all as specified. |
| 20 | Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with tinned tacks or steel wire staples, IN REPLACEMENT,all as specified. |
| 21 | Framed mild steel work such as grills, grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, railings and similar work confirming to Fe-290-Gde E-165, complete all as specified. |
| 22 | Mild steel TMT bars 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified. |
| 23 | Pressed steel frames, size of frame 125x60mm, made out pre-painted mild steel sheet 1.25 mm thick,for doors with one or more rebates including necessary fixing lugs, 100 mm size medium grade mild steel hinges, lock strike plates etcincluding providing PCC (1:3 :6)type C-0 using 12.5 mm graded crush stone aggregate for filling back of chowkhats complete all as specified, : - |
| 24 | Steel window with side hung double shutters ( inside gauge and out side glaze shutter) with pressed steel box type frame, including box type hinges with steel handles, steel peg stay, including window grill with & without glazing bar, frame fixed with MS screw 100 dovetailed or welded & including one shop coat zinc chromate primer etcincluding providing PCC (1:3 :6)type C-0 using 12.5 mm graded crush stone aggregate for filling back of chowkhats complete all as specified, : -NOTE:- As shown in drawing No. TD-CE/ALD/TD-172 sheet 1/2 & 2/2 (PWF) as applicable. |
| 25 | Powder coatedaluminium (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified. |
| 26 | Powder coated aluminium door shutters with styles & rails, anodised alumnium glazing snap beading, rubber neoprene packing including joining cleats &screws etc as per manufacturers instructions, complete all as specified. NOTES: (a) Each shutter shall have2 Nos. 200 mm long almn handles and 03 No. 100 mm size stainless steel/almn butt hinges.(b) Glass and other filling materials in panels including wire cloth and almn grill shall be measured & paid for separately under respective item of BoQ.(c) For powder coated aluminum sections minimum thickness of powder coating shall be 50 micron. |
| 27 | Powder coated aluminium window and ventilator shutters side hung typewith aluminum section weighing 0.55 Kg/m, anodised alumnium glazing snap beadingrubber neoprene packing including joining cleats &screws etc as per manufacturers instructions, complete all as specified.NOTES: -(a) Each shutter shall have2 Nos. 125 mm long almn handles and 02 No. 75 mm size stainless steel/almn butt hinges & one no. almn hook & eye.(b) Glass and other filling materials in panels including wire cloth and almn grill shall be measured & paid for separately under respective item of BoQ.(c) For powder coated aluminum sections minimum thickness of powder coating shall be 50 micron. |
| 28 | Powder coated aluminium grilltype DG-117 including necessary \"U\" clip &screws etc as per manufacturers instructions, complete all as specified. |
| 29 | Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including6 mm dia. GI hangers (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and 40 mm long 12.5 mm dia expansion hold fasteners with and including 12 mm thick Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish,IN REPLACEMENT, including cutting holes for fixing ceiling light if any complete. |
| 30 | 25 mm thick, cement concrete type B-0, 1:2:4 using 12.5 mm graded stone aggregate, finished rough, as in sub floors or similar locations, complete all as specified. |
| 31 | 75 mm thick, cement concrete type D-2, 1:4:8 using 40 mm graded stone aggregate, finished even & rough, as in sub floors, complete all as specified. |
| 32 | Machine cut kota stone slab flooring 15-16 mm thick over & including screed bed or bedding layer 15 mm thick in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing & polishing complete |
| 33 | Machine cut kota stone slab 15-16 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with ditto as per above item including backing coat 10mm thick in CM 1:4 complete all as specified |
| 34 | Granite jet black shade, 18-20 mm thick,as in step, jambs, cooking platform and like, machine cut, machine polished,bedded and jointed with grey cement slurry & pointed with grout of matching shade including necessary cutting over & including 10 mm thick (average thickness) cement mortar (1:4), complete all as specified. |
| 35 | Rounding of / moulding to edges (half round) of stone of any description including rubbing and polishing (Granite finish), complete all as specified. |
| 36 | First quality, Glazed ceramic coloured tiles 7-8 mm thick,area of each tile exc. 0.13 Sq.m but n. exc. 0.19 Sq.m on vertical surfaces as in skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 10mm thick rendering in cement mortar (1:4) including necessary cutting as per site requirement complete all as specified |
| 37 | First quality, Non skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exc. 0.06 Sq.m but n. exc. 0.11 Sq.m,laid in floors etc, set and jointed in neat cement slurry and pointed with grout of matching shade of tiles, laid over and including 15 mm thick bedding layer in cement mortar (1:6), complete all as specified. |
| 38 | First quality, vitrified ceramic, double chargedtiles 7-8mm thick (square/ rectangular) area of each tile exc. 0.18 Sq.m but n. exc. 0.36 Sq.m, laid in floors etc, set and jointed in neat cement slurry and pointed with grout of matching shade of tiles, laid over and including 15 mm thick bedding layer in cement mortar (1:4), complete all as specified. |
| 39 | Endura vitrified paving coloured tiles 9 to 10 mm thick (square/ rectangular) area of each tile exc. 0.11 Sq.m but not exc. 0.18 Sq.m, laid in floors etc, set and jointed in neat cement slurry and pointed in grout of matching shade, laid over and including 15 mm thick bedding layer in cement mortar (1:4) complete all as specified. |
| 40 | Factory made PCC type A-1 chequered tiles, ISI marked (IS:13801), with grey cement &pigment, 22-25 mm thick, of size300 mm x 300 mm, and any shape & colourin floors, over & including 20 mm thick cement mortar (1:6) screed, set and jointed with grey cement slurry, complete, all as specified. |
| 41 | 80 mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of shape approved by GE, made by table vibratory method using PU mould, laid in required pattern over and including 50mm thick compacted bed of coarse sand, compacting through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete. |
| 42 | Rendering 5 mm thickon fair faces of concrete surfaces, finished even and smooth on ceiling in cement mortar (1:3), complete all as specified. |
| 43 | Rendering 15 mm thickon fair faces of brick work or concrete surfaces, finished even and fair on walls in cement mortar (1:6),complete all as specified. |
| 44 | Rendering 15 mm thickon fair faces of brick work or concrete surfaces, finished even and fair on walls in cement mortar (1:4), mixed with water proofing compound as per manufacturers instructions, complete all as specified. |
| 45 | Supply only water proofing compound, ISI marked, complete all as specified. |
| 46 | Two coats of white wash on old ceiling surfaces, including preparation of surfaces, complete all as specified. |
| 47 | Two coats of white wash on old wall surfaces, including preparation of surfaces, complete all as specified. |
| 48 | Two coats of cement base paint on old wall surfaces, including preparation of surfaces, complete all as specified. |
| 49 | Three coats of white wash on new plastered ceiling surfaces, including preparation of surfaces, complete all as specified. |
| 50 | Two coats of cement base painton new plastered wall surfaces, including preparation of surfaces, complete all as specified. |
| 51 | Complete removal of existing treatment of any description, including prepration of wall surfaces of any description complete all as specified and applying the following: -(a) Applying wall care putty, in 3mm thick& smoothening the surfaces etc. as specified (preparatory to paint as directed). (b) Two coats of interior acrylic distemperover and including a coat of acrylic emulsion primer. |
| 52 | Prepration of new plasterd wall surfaces of any description complete all as specified and applying the following: -(a) Applying wall care putty, in 3mm thick& smoothening the surfaces etc. as specified (preparatory to paint as directed). (b) Two coats of interior acrylic distemperover and including a coat of acrylic emulsion primer. |
| 53 | Prepration of new plasterd ceiling surfaces of any description complete all as specified and applying the following: -(a) Applying wall care putty, in 3mm thick& smoothening the surfaces etc. as specified (preparatory to paint as directed). (b) Two coats of interior acrylic distemperover and including a coat of acrylic emulsion primer. |
| 54 | Complete removal of existing treatment of any description, including prepration of wall surfaces of any description complete all as specified and applying the following: -(a) Applying wall care putty, in 3mm thick& smoothening the surfaces etc. as specified (preparatory to paint as directed). (b) Two coats of exterior acrylic emulsion over and including a coat ofwater based exterior primer. |
| 55 | Prepration of new plasterd wall surfaces of any description complete all as specified and applying the following: -(a) Applying wall care putty, in 3mm thick& smoothening the surfaces with sand papers/ mechanized sanding etc., (preparatory to paint as directed). (b) Two coats of exterior acrylic emulsion over and including a coat ofwater based exterior primer. |
| 56 | Plain sheet glass 5.5mm thick ordinary quality and glazing with oil putty or wooden beads in squaresexc. 0.5 Sq.min each pane complete all as specified. |
| 57 | Two coatsof synthetic enamel paint over & including a coat of pink primer overwood and wood (new) basedsurfaces of any description not other wise described over 10cm width or girth including preparation of surfaces complete all as specified. |
| 58 | Two coats of synthetic enamel paint over & including a coat of red oxide primer oversteel & iron (new) surfaces of any description, not otherwise described, over 10 cm in width or girth, including preparation of surfaces complete all as specified. |
| 59 | Steel tubes ‘medium grade’, galvanized with all fittings and fixed to walls and ceilings or laid in floors, including taking down existing tube complete all as specified of size: - |
| 60 | 15 mm bore |
| 61 | 20 mm bore |
| 62 | Ball brass valve, 20mm dia, high pressure with polythene float and flynut complete screwed for iron pipe or brass,IN REPLACEMENT, complete all as specified |
| 63 | 20mm bore Gun metal globe/gate valve, with ron wheel head, ISI marked (IS:9890), screwed both ends for GI tubes, IN REPLACEMENT, complete all as specified |
| 64 | Angular stop valve/cock, cast copper alloy, chromium plated, with wall flange,quarter turn type, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, IN REPLACEMENT,complete. MAKE: Jaquar Cat No.FLP-5053PM or equivalent make mentioned in Appendix \"B\". |
| 65 | Bib tap, cast copper alloy, chromium plated fancy type, long body with wall flange,quarter turn type, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, IN REPLACEMENT,complete. MAKE: Jaquar Cat No.FLP-5037PM or equivalent make mentioned in Appendix \"B\". |
| 66 | Single lever basin mixer, without popup waste with 450mm long braided hoses and fittings cast copper alloy chromium plated, quarter turn type, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe,complete. MAKE: Jaquar Cat No.FLP-5167 NB or equivalent make mentioned in Appendix \"B\". |
| 67 | Vitreous China wash down water closet pan (One piece) Rimless bowl With cistern For coupled WC With UF Soft Close Slim seat cover, hinges, conversion Bend, Dual Flush cistern fitting, fixing accessories and accessories set, size: 390x645x845 mm, S Trap- 250 mm (With conversion bend)IN REPLACEMENT, complete all as specified.MAKE OF EWC: Jaquar Cat No. ONS-WHT-10753NS250UFSMZ or equivalent make mentioned in Appendix \"B |
| 68 | Vitreous China wash hand basin, counter type, white of size420x420x155 mm including fixing acessories like 32mm dia CP waste coupling, CP bottle trap & PVC collapsible waste pipe, IN REPLACEMENT, complete.MAKE:Jaquar Cat No.CNS-WHT-905 or equivalent make mentioned in Appendix \"B |
| 69 | Vitreous China half stall Urinal pot, white, size 385x325x635 mm, with & including , urinal spreader, cast copper alloy, half or full threaded chromium plated waste couplingsuitable for & including 32 mm size PVC waste/discharge pipe, rag bolts, IN REPLACEMENT, complete. MAKE OF URINAL:- Jaquar Cat No. URS-WHT-13253N or equivalent make mentioned in Appendix \"B\". |
| 70 | Hand Shower (Health Faucet) with 8mm Dia, 1 Meter Long Flexible Tube & Wall Hook complete. MAKE: Jaquar Cat No. ALD-573 or equivalent make mentioned in Appendix \"B\". |
| 71 | Stainless steel (SS-304) sink without drainage board made out of 1.00mm thick sheet for kitchen or laboratory with plug waste pipe washers including cantilever cast iron brackets connecting union etc overall size 610mm x 460mm x 229 mm with bowl size 560mmx 406mm x 229mm complete. MAKE: PRAYAG Cat No.PSS-4 or equivalent make mentioned in Appendix \"B\". |
| 72 | Stainless steel (SS-304) sink made out of 1.00mm thick sheet for kitchen or laboratory with plug waste pipe washers including cantilever cast iron brackets connecting union etc overall size 940mm x 460mm x 229 mm with bowl size 405mmx 354mm x 229mm complete. MAKE: PRAYAG Cat No.PSS-5 or equivalent make mentioned in Appendix \"B\" |
| 73 | Looking mirror 1200 x 900 mm, selected quality glass 5.5 mm thick, mounted on PVC ply not less than 6 mm thick, and provision of PVC frame alround fixed with chromium plated brass screws and rawl plugs, IN REPLACEMENT, complete |
| 74 | SS towel rack 600 mm long, withoutlower hangers but with 3 hooks,fixed to wall with SS screws and PVC rawl plugs, complete.MAKE: Jaquar Cat No. ACN-1181FHS or equivalent make mentioned in Appendix \"B\". |
| 75 | Brass chromium plated towel ring square fixed to wall with SS screws and PVC rawl plugs, complete.MAKE: Jaquar Cat No. AKP-35721P or equivalent make mentioned in Appendix \"B\". |
| 76 | Stainless steel soap dish, fixed to wall with SS screws and PVC rawl plugs, completeMAKE: Jaquar Cat No. AKP-35731P or equivalent make mentioned in Appendix \"B\". |
| 77 | PVC connections 15 mm size of length 450 mm with PTMT nuts,complete all as specified. |
| 78 | uPVC pipes,type-B, ISI marked (IS:13592) single socketed in any length with rubber ring joints, fixed under floors / fixed to wallas SWR pipes, IN REPLACEMENT, complete all as specified of size: - |
| 79 | 75 mm external dia pipe |
| 80 | 110 mm external dia pipe |
| 81 | uPVC/PVC bend any radius, complete all as specified. suitable for uPVC soil waste discharge pipes,of size: |
| 82 | 75 mm external dia pipe |
| 83 | 110 mm external dia pipe |
| 84 | uPVC/PVC vent cowl 75-110 mm external dia, complete all as specified. |
| 85 | 75mm dia uPVC / PVCfloor trapincluding jointing with solvent and embedding in cement concrete type B-1 (1:2:4) complete all as specified. |
| 86 | E/M WORKS |
| 87 | Point wiring with multi-stranded copper conductor, single core, PVC insulated and unsheathed cable, including PVC insulated unsheathed stranded copper conductor single core cable as earth continuity conductor to common earth and connected to earth dolly, with and including GI terminal modular boxes made out of 1.2mm thick MS sheet concealed in wall modular metal flush box & including modular cover plate with framehaving necessary cutting for fixing switches/ socketscomprising the following: - |
| 88 | One light point controlled by one switch or one fan point controlled by one switch & fan regulator etc. or for bell/buzzer with 1.5 Sq. mm (nominal area) cable & 1.5 Sq. mm (nominal area) cable as earth continuity conductor, in and including rigid non metallic PVC medium duty concealed conduit not less than 20mm dia all as specified. |
| 89 | One Socket outlet three pin, 6 Amp, on the same board, with 1.5 Sq. mm (nominal area) cable & 1.5 Sq. mm (nominal area) cable as earth continuity conductor, all as specified. |
| 90 | One socket outlet three pin, 6 Amp, independent, with 1.5 Sq. mm (nominal area) cable &1.5 Sq. mm (nominal area) cable as earth continuity conductor, in and including rigid non metallic PVC medium duty concealed conduit not less than 20mm dia all as specified. |
| 91 | One socket outlet three pin, 6/16 Amp, independent, with 2.5 Sq. mm (nominal area) cable & 2.5 Sq. mm (nominal area) cable as earth continuity conductor, in and including rigid non metallic PVC medium duty concealed conduit not less than 20mm dia all as specified. |
| 92 | NOTES: (a) Switch(es) & socket(s) shall be measured & paid for separately under respective item of Schedule \"A\". (b) GI boxes shall be fixed flush to walls in position with cement mortar (1:4). |
| 93 | Switch modular type single pole one way, 6 Amp, complete all as specified. |
| 94 | Switch modular type single pole one way, 16 Amp,complete all as specified. |
| 95 | Socket outlet multipurpose having provision for 2&3 pin, 6 Amp, 2 Module complete all as specified. |
| 96 | Socket outletmultipurpose having provision for two-in-one 3 pin 6 Amp & 3 pin 16 Amp,2 Module complete all as specified. |
| 97 | Ceiling rose, surface bakelite, 65 x 50mm, three terminals complete, all as specified. |
| 98 | Sub main wiring (with approved colour coding as per IS) with single core FRLSHPVC insulated multi stranded copper conductor 1.1 KV grade (main cable: number of runs as indicated below along with single core FRLSH PVC insulated multi stranded copper conductor 1.1 KV grade for earthing in conduits, complete all as specified for the following: - |
| 99 | 2 runs of 4 Sq. mm main cable + 1 run of 4 Sq. mm earth cable |
| 100 | 2 runs of 6 Sq. mm main cable + 1 run of 6 Sq. mm earth cable |
| 101 | NOTES: (i) Conduit & conduit accessories shall be measured & paid for separately.(ii)For payment purposes, total runs of main cable (each run of one running metre) as mentioned above and one run (one running metre) of earth cable shall be considered together as \"1 RUNNING METRE\" |
| 102 | Rigid non metallic, PVC concealed conduit, not less than 20 mm bore, medium grade, ISI marked, inclusive of all fitings (such as junction boxes, bends, elbows, tees, reducers, bell mouth tube ends) and all fixing acessories such as couplers, lock nuts, saddles, pipe hook etc. for sub main wiring and the like complete all as specified. |
| 103 | Sheet metal enclosure for DB for fixing MCB’s, isolators etc., having IP-43 protection, suitable for surface and flush mounting, IN REPLACEMENT,complete all as specified comprising the following: - |
| 104 | SPN, 8 way with 200 Amp rated bus bar, 240 V, double door type. |
| 105 | TPN, 4 way with 200 Amp rated bus bar, 415 V, double door type with and including MCCB 4 pole 63 Amp, 16kA. |
| 106 | MCB suitable for 240 volt AC supply, SP with over load and short circuit protection and rupturing capacity not less than 10 kA, \"C\" curve type of rating6 to 32 Amp,complete all as specified. |
| 107 | MCB suitable for 240 volt AC supply, DP with over load and short circuit protection and rupturing capacity not less than 10 kA, \"C\" curve type of rating 40-63 Amp,complete all as specified. |
| 108 | MCB suitable for 240 volt AC supply, four pole with over load and short circuit protection and rupturing capacity not less than 10 kA, \"C\" curve type of rating 63 Amp,complete all as specified. |
| 109 | Orbit down lighter 20 wattcylindrical type 36 degree beam angle quality lighting to ensure consistant color point between luminiaries within a lighting application 240 voltswith driver complete all as specified. |
| 110 | LED luminaire 6 watt, 220 V, round shaped recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, lamp suitable for roof ceiling including connecting up with three core flexible copper conductor wire of suitable size,complete all as specified. |
| 111 | Surface mounted Environment friendly LED batten with powder coated aluminium housing with intigrated electronic driver with THD<10% LED 20 W lighting fixture with extruded polycarbonate, 6500K, lumen output should not be less than 90 lumens per wattIN REPLACEMENT,completeMAKE: Havells Cat No. LUMILINESMART20WLED865PCWHor equivalent in makes mentioned in Appendix \"B\" here-in-after. |
| 112 | Recess mounted bottom opening LED 36W cool day light luminaire (600 mm x 600mm) CRCA powder coated housing, IP- 54 protection, suitable for grid ceiling lumen output should not be less than 90 lumens per watt including connecting up with three core flexible copper conductor wire of suitable sizecompleteMAKE: Havells Cat No. DROPDOWNFLAT2X2PLR36WLED857 or equivalent in makes mentioned in Appendix \"B\" |
| 113 | LED flood light70 watt suitable foroutdoor type pressure die cast aluminium housing, heat resistant toughtened glass with frame and lamp with minimum efficiency 110 LM/W IP 66 protection, IN REPLACEMENT, and making connections, complete.MAKE: Havells Cat part no.JETAADORNFLS70WLED757SSYMTOTGor equivalent make mentioned in Appendix \"B\". |
| 114 | Ceiling fan complete with blades, down rods, stepped type electronic regulator and accessories, 230 volt, 1200mm sweep with service value 6.00 BEE with brushless direct current motor (BLDC) including PVC insulated and overall sheathed flexible 3 core 0.5 Sq.mm copper conductor cable with & including fan regulator step type, 2 Module complete all as specified |
| 115 | Exhaust fansteel body of size 300mm sweep with louvers, 900 RPM 230 volts single phase AC supply complete with bolt, nuts and washer and including PVC insulated and overall sheathed flexible 3 core 0.5 Sq.mm copper conductor cable from ceiling rose to exhaust fan for giving connection complete all as specified. |
| 116 | Exhaust fanplastic body of size 300mm sweep with louvers, 1200 RPM 230 volts single phase AC supply complete with bolt, nuts and washer and including PVC insulated and overall sheathed flexible 3 core 0.5 Sq.mm copper conductor cable from ceiling rose to exhaust fan for giving connection complete all as specified. |
| 117 | Electric water heater storage type steel body withinner tank (as per manufacturer instruction)and heating element upto 2 kw capacity 25 litre, BEE 5 star rated complete with all accessories such as safety valve, thermostate, NRV, steel PVC connector for hot water etc complete all as specified. MAKE;- Havells cat part No-GHWAHPSWH025 or equivalent make mentioned in Appendix \"B\" |
| 118 | AC / geyser box modular type, ISI MARKED, with MCB and plug top flush in wall etc complete all as specified. |
| 119 | Supplying, laying, jointing and testing XLPE insulated heavy duty multi stranded armoured and PVC sheathed LT cable 1100 volts grade with aluminium conductor 35 Sq.mm, 3.5 core laid in trenches/ ducts/ along poles/through pipes including taking out existing cable complete all as specified.NOTE:- Excavation and earth work, brick protection and sand cushning will be measured & paid separatly under respective item of BoQ) |
| 120 | Excavation in trenches n. exc 1.5 metre wide for taking out/ laying pipe line, cable, foundation etc. exceeding 1.5 metre but exceeding 3.00 metre deep and getting out as in soft/ loose soil complete all as specified. |
| 121 | Returning filling in including spreading, levelling, watering and well ramming in layers notexceeding 25cm thick complete all as specified. |
| 122 | Removal of excavated surplus spoil to a distance n. exc. 50m and depositing where directed at level not exceeding 1.5 m above the starting point complete all as specified. |
| 123 | Sand cushioning ( local dry river sand) for under ground cable 23cm thick (one layer of 8cm thickness before laying the cable and other layer of 15cm thickness after laying the cable) all as specified.NOTE:- Punned down thickness (over all 18cm) shall be considered for measurement and payment.) |
| 124 | Brick protection with pulverized fuel ash lime brickslaid flat across the route of underground cable all as specified. |
| 125 | GI pipe 50mmborelight grade with all fittings fixed as termination postal ,fixed to poles/ walls/ under floors/ under road etccomplete all as specified. |
| 126 | GI pipe 25mmbore medium grade with all fittings fixed as termination postal ,fixed to poles/ walls/ under floors/ under road etcincluding taking down existing tube complete all as specified. |
| 127 | Gun metal globe/gate valve, 25mm dia with iron wheel head, ISI marked (IS:9890), screwed both ends for GI tubes,complete all as specified |
| 128 | Earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 mm buried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 metre below normal ground level, connected to and including 4 mm GI wire as earthing lead by means ofGI or steel bolts/nuts/washers, protected by 15 mm bore GI light grade pipe. Earth plate shall be surrounded by alternate layer of charcoal or coke and common salt 15 cm thick all around bottom and top. 20 mmbore GI light grade pipe for watering and including funnel, wire mesh, RCC cover, reinforced with 8 mm dia TMT bars @ 75 mm C/C both ways with mild steel handle 12 mm dia, using round bar, PGI funnel with wire mess & frame, PCC (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) as in earthing pit including necessary excavation & earth work, all as specified & shown in electrical plate No. 3 of MES Schedule Part – I.IN REPLACEMENT, complete all as specified. Note:- (i)PCC chamber shall be constructed at least 1.5 metre away from the earth electrode and pipe for watering shall be provided in slanting manner. (ii) The unit rate includes earthing lead & protection pipe upto 7.5 metre from top of earth plate.(iii) Earth resstance shall be less than 3 ohm. In case the test results are not found less than 3 ohm, complete earthing shall be redone by the contractor without any extra cost to Govt. |
| 129 | Taking down existing air conditioning indoor and out door unit stand copper tubing with all accessories and refrigerant and re-fixing same or other location etc.and making good surface as per existing, complete all as specified. |
| 130 | Demolition and Dismantling work |
| 131 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 Sq.m but not exceeding 4.00 Sq.m each and removing from site all as specified. |
| 132 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing serviceable tiles to store and rubbish off the premises complete all as specified. |
| 133 | Demolition brickwork or stone / boulder masonrybuilt in cement mortar including all quoins, arches, pillars etc complete all as specified. |
| 134 | Demolition of cement concrete (unreinforced) in ground floors and pavings not excceding 15cm thickness (above or below ground level) all as specified |
| 135 | Demolition of unreinforced cement concreteof any description and in any position not otherwise specifically provided all as specified. |
| 136 | Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete with batten, casing caping of MS or and PVC conduit on surface or concealed, including switches, ceiling roses, pendants, regulators, sockets, mild steel terminal boxes etc., removing materials and making good disturbed surfaces due to taking down etc. to the entire satisfaction of Engineer-In-Charge, complete all as specified. |
| 137 | Taking down carefully copper/aluminium sub main wiring complete, including existing batten/conduit consealed/surface etc., removing materials and making good disturbed surfaces due to taking down etc. to the entire satisfaction of Engineer-In-Charge, complete all as specified. |
| 138 | Note : Amount ofcredit for retrieved materials is mentionedin Sch of credit of tender documents in pdf form which will be deducted while acceptance of tender offline. |
