Tender For Repair Work Of Buddhi Vihar Sewer Pumping Station - M-150 Brick Work In 1:4In Foundation And Plinth Including Supply Of All Metarials, Labours & T&P Etc. Required For Propercompletion Of Work ( Sor 2020/ 307/A) 2 12Mm. Thick Plaster With One , moradabad-Uttar Pradesh

Tender For Repair Work Of Buddhi Vihar Sewer Pumping Station - M-150 Brick work in 1:4in foundation and plinth including supply of all metarials, labours & T&P etc. required for propercompletion of work ( SOR 2020/ 307/A) 2 12mm. Thick plaster with one part of cement and three part of approved coarse sand including supply of all materials labour and completion of work. Including making of groove in plaster surface. (SOR 2020-583) 3 R.c.c. work with cement approved coarse sand and 2cm. Gauge approved stone grit in proportion of 1:1.50:3 in lintels of doors, windows and sunshades excluding supply of renforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I Binding wire and including necessary centering and shuttering etc. and supply of all meterials, labour and T&P etc. required for proper contractor free of cost including making of drip coarse. (S.N0-283A) 4 Fiber wood particle board 6 mm thick (SOR- chapter 1 item 15 G) 5 Finishing wall with superior quality water proof cement paint/snowcem of approved make and quality of new work with two coats to give even shade including preparing surface by the thoroughly cleaning and sand preparing and supply of all materials, labour and T&P etc. required for proper completion of the work. (S.No. 660+661) 6 Finishing wall with one coat of water proof cement paint Weather coat of approved Quality on previously new surface with this paint to give an even shade including supply of all materials, labour, Tools & plant etc. required for proper completion of the work. (SOR- chapter 15, 09+10+11) 7 Mild steel or iron work of small size and sections such as holding down bolts, hold fast tie roads, grating etc (when not including in an over all rates) wrought to required form, including of supply of steel, bolts, nuts and wastage etc. and fixing of fabrication of grit and stair case ralling(SOR - 502c) 8 Mosquito /Fly proof stainless steel grade 304 wire mesh gauge with 0.50mm dia wire and 1.40mm white (SOR 2020- chapter 14 F) 9 Mild steel or iron work in heavy sizes such as trusses; built up gates, door, frames, record racks, roof work, gates etc. wrought to required form including drilling holes, rivetting or welding where necessary, and also including drilling holes, rivetting or welding where necessary, and also including supply of steel, bolts and nuts. (S.N0- 504/2020) 10 Applying printer coat over new steel and other metal surface after paint including preparing the surface by thoroughly cleaning oil grease dirt and other foreign matter and scoured with wire brushes fine steel/wood scrappers sand paparing and knotting including coat of all and supply of all materials, labour and T&P etc required for proper complettion of the work.SOR chapter 15 New item 1a+b+2/2020) 11 1 % Cess 12 18 % G.S.T

INR 531 /-

INR 4.23 Lakhs /-