Providing And Fixing Open Gym Equipment And Other Civil Work Behind Nature Glory Bldg , Parsik Nagar In Ward 149 Mumbra-Kalwa Assembly Constituency-1 Dismantling the R.C.C. Work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed etc. complete. P.W.D. S.S.R. (2022-23)- SN1565 2 Removing lime or lean cement concrete including stacking the spoils as directed with all leads, lifts etc, complete. P.W.D. S.S.R. (2022-23)- SN1550 3 Excavation for foundation in soft strata such as earth soil of all sorts sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50 m and spreading for embankment or stacking, disposing as directed etc. complete. P.W.D. S.S.R. (2022-23)- SN 720 4 Excavation for foundation of structure as per drawing and technical specifications including setting out, construction of shoring , brushing, removal of stumps and other deleterious matter, dressing of side and bottom and back filling with approved material etc. complete. (in marshy soil by mechanical means) P.W.D. S.S.R. (2022-23)- SN 522 5 Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. P.W.D. S.S.R. (2022-23)- SN 752 6 Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) P.W.D. S.S.R. (2022-23)- SN 827 7 Providing and laying Cast in situ/Ready Mix cement concrete in M20 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water manually, formwork, compacting, roughening the exposed faces if specials finish is to be provided and curing etc. complete P.W.D. S.S.R. (2022-23)- SN 832 8 Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, P.W.D. S.S.R. (2022-23)- SN 871 9 Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) P.W.D. S.S.R. (2022-23)- SN 852 10 P/Fprecast SFRC rectangular chamber covers of size…..(0.9 m x 0.70 x.04)m opening (0.9x0.6)m with frame ,made out of steel fibre composite concrete of M35 grade as per ASTM standard and generally confirming to IS 12592 with 28 days curing. P.W.D. S.S.R. (2021-22)- SN 2185 (0.90 x 0.60 m) 11 P/ Laying half round pipe 450mm dia. Etc complete. RA 12 Stamp Concrete of 100mm Thickness - Providing and Laying in-situ M30 Grade unreinforced plain cement stamp concrete of 100mm thickness pavement over a prepared sub base with 43 grade cement, coarse and fine aggregate (natural sand / VSI grade finely washed crushed sand) Confirming to IS 383, as per mixed in a batching and mixing plant / non tilting mixer and weigh batcher as per approved mix design, admixtures, transporting to site in Thane city with lead upto 20KM P.W.D. S.S.R. (2022-23)- SN 2193 13 Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. P.W.D. S.S.R. (2022-23)- SN 816 14 Providing and laying concrete pipes of I.S.NP. class of 300mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete. P.W.D. S.S.R. (2022-23)- SN 1380 15 Providing and laying in-situ M30 Grade unreinforced plain cement concrete pavement over a prepared sub base with 43 grade cement , coarse and fine aggregate( VSI grade finely washed crushed sand) conforming to IS 383, using fine and coarse aggregates combined gradation as per Table 600-3 of MORTH Specification 2013, mixed in a batching and mixing plant/ non tilting mixer and Weigh batcher as per approved mix design, admixtures, transporting to site, spreading, laying with approved make paver,compacted and finished in a continuous operation, finishing to lines and grades as directed by Engineer-in-charge and curing by curing compound /by providing cement vata in cement Mortar 1:8 @0.6m X 0.6m centre to centre, admeasuring 80 mm at bottom and 40 mm at top with depth of 75mm and maintaining the same throughout curing period by any other method approved by Engineer-in-charge. P.W.D. S.S.R. (2022-23)- SN1380 16 Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete. P.W.D. S.S.R. (2020-21)- SN 1090 17 Providing and applying two coats (exterior quality) of flat oil paint of approved colour and shade to the plastered surface in buildings and workshops including scaffolding if necessary, cleaning the surface and preparing surface etc. complete. (excluding primer coat P.W.D. S.S.R. (2022-23)- SN 1081 18 Supplying og excavtor cum laoder machin(like JCB Machine) etc. complete. AS SN 1715 19 Providing & Fixing Fabricated Iron spray painted bench of size 1.5 m ( 5 ft) length of approved quality including all fixures finishing etc. complete ( As per Lowest App. Quotation) Quatation SN 24 20 Providing, laying and fixing exterior grade fibrilling fibre reinforcement heavy duty designer cement concrete tiles for steps and dado of approved colour and design 22 +/ -2 mm thick bayer colour pigmented as per IS 1237 - 1980 reaffirmed in 2006 ,having wert transvrse strenghth of 3.5 / mm 2, water absorption less than 10 % abrasion / wear resistance less than 2 mm ,skid resistance more than 25.0 (ASTM:E303) and no fading as per DIN - 51094 in plan / designed pattern on a bed of 1:4 cement mortar including cement float ,filling joints with neat cement slurry ,curing,polished and cleaning etc. complete. For steps, and dado P.W.D. S.S.R. (2022-23)- SN 1055 21 Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete 22 Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days an 23 Providing &supplying and installation of pull down device ...etc. Complete Quatation SN 29 24 Providing &supplying and installation shoulder joint rehabitation device ...etc. Complete Quatation SN 32 25 Providing &supplying and installation walking machine device ...etc. Complete Quatation SN 34 26 Transportation of excavated material including loading and unloading etc. complete P.W.D. S.S.R. (2022-23)- Statement C lead up to 7 km
