Tender For Construction Work Of Shops Near The Main Market In Nagar Panchayat Kurara - Boring Of Hole Under Reamed Piles By Hand Operating Auger In B.C. As Per I.S. Code 2911 (Part-Iii) 1980 30 Cm Dia S.U.R. With 50 Cm Dia Bulb, 3.65M In Depth 2 Rcc Wor, Hamirpur-Uttar Pradesh

Construction work of shops near the main market in Nagar Panchayat Kurara - Boring of hole under reamed piles by hand operating auger in B.C. as per I.S. Code 2911 (Part-III) 1980 30 Cm dia S.U.R. with 50 Cm dia bulb, 3.65m in depth 2 RCC work in 1:1.5:3 with cement sand and 20 mm. Gauge granite stone grit including in piles. SI No. 288 3 Mild steel or Iron work in plain work including its cutting & bending with all labour T&P etc. SI No. 504 4 M-150 class brick work in 1:4 cement sand mortar including all labour T&P in super structure. 5 12 mm thick plaster work in 1:5 with cement sand mortar including supply of all material labour T&P SI No. 586 6 E/w in filling by cartage earth lead upto 4.00 Km distance away from site work by tractor trolly. 7 Sand filling including supply of all material labour T&P SI. No. 255 8 Cement Concrete in 1:4:8 with 40 mm gauge OBB ballast including supply of all material labour T&P 9 4 cm thick 1:2:4 plain cement concrete floor with cement approved coarse sand and 2cm (3/4) graded approved stone laid in panels finished with 3mm (1/8) floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified over and including 8cm (3) thick base concrete consisting of cement fine sand of 1.25 fineness modulus and brick ballast 4 cm. (1½) gauge in the proportion of 1:4:8 and removing any overlapping mortar at the joints ofthe panels if any and giving them a uniform finish including supply of all materials, labour and tools and plants etc. required for proper completion of the work. without base concrete (As Per S.I. No.-602) 10 Supplying and fixing of rolling shutters of approved make of 80x1.25 mm (3x3½ gauge) cold rolled MS: laths inter locked throughout their entire length and joined together at the end locks and mounted on specially designed pipe shaft with brackets side guides and arrangements for inside and outside locking with push and pull operation complete but excluding the cost of top cover and springs. 11 Providing and fixing 27.5 mm long wire springs grade 2 for rolling shutters. 12 Providing and fixing top cover for rolling shutters. 13 Providing and fixing ball bearing for rolling shutters. 14 Painting or Varnishing on New iron work. 15 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 16 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) 17 Supply of M.S. Angle iron door, windows ventilation frame made of approved M.S. angle iron wroghtto required form including drilling hole, welding and recetting where necessary and also including supply of all material, such as steel hinges of required size, nut & bolts etc. and also including all taxes, wastage and one coat of red oxide paint complete in all respect as per direction of Engineer-in-charge for proper completion of work at site of work 18 Adding for internal electrification work. 12.5% 19 Add 5% for water Supply & Sanaitary Fitting

INR 3840 /-

INR 29.43 Lakhs /-