|
| 1 | Description of work |
| 2 | Providing and fixing aluminium work for doors, windows, ventilatorsand partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved makeconforming to IS: 733 and IS: 1285, fixing with dash fasteners ofrequired dia and size, including necessary filling up the gaps atjunctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free,straight, mitred and jointed mechanically wherever required includingcleat angle, Aluminium snap beading for glazing / paneling, C.P.brass / stainless steel screws, all complete as per architecturaldrawings and the directions of Engineer-in-charge. (Glazing, panelingand dash fasteners to be paid for separately) : |
| 3 | Powder coated aluminium (minimumthickness of powder coating 50 micron) , DSR-2023- 21.1.1.2 |
| 4 | Providing and fixing 12 mm thick prelaminated particle board flatpressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors, windowsshutters and partition frames with C.P. brass / stainless steel screwsetc. complete as per architectural drawings and directions of engineerin-char |
| 5 | Pre-laminated particle board with decorative laminationon one side and balancing lamination on other side , DSR-2023-21.2.2 |
| 6 | Providing and fixing glazing in aluminium door, window, ventilatorshutters and partitions etc. with EPDM rubber / neoprene gasketetc. complete as per the architectural drawings and the directions ofengineer-in-charge . (Cost of aluminium snap beading shall be paidin basic item): |
| 7 | With float glass panes of 5 mm thickness (weight notless than 12.50 kg/sqm) , DSR-2023-21.3.2 |
| 8 | Providing and fixing double action hydraulic floor spring of approvedbrand and manufacture conforming to IS : 6315, having brand logoembossed on the body / plate with double spring mechanism anddoor weight upto 125 kg, for doors, including cost of cutting floors,embedding in floors as required and making good the same matchingto the existing floor finishing and cover plates with brass pivot andsingle piece M.S. sheet outer box with slide plate etc. complete asper the direction of Engineer-in-charge. |
| 9 | With brass cover plate minimum 1.25 mm thickness, DSR-2023-21.4.2 |
| 10 | Providing and fixing aluminium round shape handle of outer dia 100mm with SS screws etc. complete as per direction of Engineer-in |
| 11 | Powder coated minimum thickness 50 micron aluminium, DSR-2023-21.16.2 |
| 12 | Providing and fixing ISI marked aluminium butt hinges anodised (anodiccoating not less than grade AC 10 as per IS: 1868) transparent or dyedto required colour or shade with necessary screws etc. complete: |
| 13 | 100x75x4 mm, DSR-2023-9.95.3 |
| 14 | Providing and fixing aluminium sliding door bolts, ISI marked anodised(anodic coating not less than grade AC 10 as per IS : 1868),transparent or dyed to required colour or shade, with nuts and screwsetc. complete |
| 15 | 250x16 mm, DSR-2023-9.96.2 |
| 16 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodiccoating not less than grade AC 10 as per IS : 1868 ) transparent or dyedto required colour or shade, with necessary screws etc. complete : |
| 17 | 150x10 mm , DSR-2023-9.97.4 |
| 18 | Providing and fixing aluminium handles, ISI marked, anodised (anodiccoating not less than grade AC 10 as per IS : 1868) transparent or dyedto required colour or shade, with necessary screws etc. complete : |
| 19 | 100mm, DSR-2023-9.100.2 |
| 20 | Providing and fixing aluminium hanging floor door stopper, ISI marked,anodised (anodic coating not less than grade AC 10 as per IS : 1868)transparent or dyed to required colour and shade, with necessary screwsetc. complete |
| 21 | Twin rubber stopper, DSR-2023-9.101.2 |
| 22 | Providing and fixing bright finished brass 100 mm mortice latch andlock, ISI marked, with six levers and a pair of anodised (anodic coatingnot less than grade AC 10 as per IS : 1868) aluminium lever handles ofapproved quality with necessary screws etc. complete., DSR-2023-9.103 |
| 23 | Providing and fixing aluminium die cast body tubular type universalhydraulic door closer (having brand logo with ISI, IS : 3564, embossedon the body, door weight upto 35 kg and door width upto 700 mm), withnecessary accessories and screws etc. complete. . , DSR-2023-9.83 |
| 24 | Providing and fixing M.S. grills of required pattern in frames of windowsetc. with M.S. flats, square or round bars etc. including priming coatwith approved steel primer all complete |
| 25 | Fixed to openings /wooden frames with rawl plugs screws etc, DSR-2023-9.48.2 |
| 26 | Painting with synthetic enamel paint of approved brand andmanufacture to give an even shade |
| 27 | Painting with synthetic enamel paint of approved brand andmanufacture to give an even shade, DSR-2023-13.61.1 |
| 28 | Cost of Drilind 200 mmx165mmx125 mtr.deep bore well in all kind of Soil and rock in rural area for instalation of pump set with Hydrolic DTH Rig machine all complete including all materials, tools,driling rig,air compressureand equipmentsas well as fule, lubricantsand cost of transportation of rig machine annd other vehical up to Site. |
| 29 | (a) From 0.00 M to 50.00 M below G.L. |
| 30 | (b) From 51.0 M to125.00 M |
| 31 | Supply Submersible Pump Set 100mm Dia , 3.0Hp, 33Stage |
| 32 | Supply Flat flexible submersible cable , 3core 4sq mm |
| 33 | Supplyall tools, equipments and labours and doing washing, flushing and development of drilled tube well to give clean and clear water all complete as per dirction of E/I |
| 34 | supply of 200mm Dia x 3.00m lony UPVC Casing Pipe Conforming to IS 2016 |
| 35 | Providing and fixing suitable size threaded mild steel cap or spotwelded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell |
| 36 | 200 mm dia , DSR-2023-23.13.3 |
| 37 | Providing and fixing M.S. clamp of required dia to the top of casing/housing pipe of tubewell as per IS: 2800 (part I), including necessarybolts & nuts of required size complete. |
| 38 | 200 mm clamp , DSR-2023-23.14.3 |
| 39 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including allCPVC plain & brass threaded fittings, including fixing the pipe withclamps at 1.00 m spacing. This includes jointing of pipes & fittingswith one step CPVC solvent cement and testing of joints completeas per direction of Engineer in Charge |
| 40 | 50 mm nominal dia Pipes , DSR-2023-18.7.6 |
| 41 | Providing and fixing gun metal gate valve with C.I. wheel of approvedquality (screwed end) : 25 mm nominal bore , DSR-2023-18.17.1 |
| 42 | Providing and fixing gun metal non- return valve of approved quality 25mm diaHorizontal , DSR-2023-18.19.1.1 |
| 43 | Providing and fixing gun metal non- return valve of approved quality |
| 44 | 50 mm nominal bore1Vertical , DSR-2023-19.19.4.2 |
| 45 | Providing and fixing fly proof galvanized M.S. wire gauge to windowsand clerestory windows using wire gauge with average width of aperture1.4 mm in both directions with wire of dia 0.63 mm all complete., DSR-2023-9.51.2 |
