Name of Work: for Chemical Earthing to be done on 220/132/33KV T/Fsinstalled at 220 KV S/S Sikandrabad, Under ETD, Bulandshahr.
Sl. No.
Item Description
1
Work for Chemical Earthing to be done on 220/132/33KV T/Fsinstalled at 220 KV S/S Sikandrabad, Under ETD, Bulandshahr.
2
Supply, installation, commissioning and testing of complete set ofChemical Earthing System on 220/132 KV T/Fs (03Nos.), 220/33 KV T/F\"s (02 Nos.) and 132/33KV T/F\"s (03 Nos.)installed at 220kV S/S Sikandrabadincluding excavation, making of earth pit, fixing of electrode with back fill earthing compound, fixing of earth pit cover, any other civil work as per the site engineer and as per drawing attached.Scope of Work: A) Construction ofunit earth pit:a. A hole of 100mm to 125mm dia shall be augured /dug to a depth of about 3.0 meters.b. The earth electrode shall be placed into this hole.c. It will be penetrated into the soil by gently driving on the top of the rod. Here natural soil is assumed to be available at the bottom of the electrode so that min. 150 mm of the electrode shall be inserted in the natural soil.d. Earth enhancement material (minimum approx. 30-35 kg) shall be filled into the augured/dug hole in slurry form and allowed to set. After the material gets set, the diameter of the composite structure (earth electrode + earth enhancement material) shall be of minimum 100 mm dia covering entire length of the hole.e. Remaining portion of the hole shall be covered by backfill soil, which is taken out during auguring /digging.f. A copper strip of 200mmX25mmX6mm shall be exothermically welded to main earth electrode for taking the connection to the main equi-potential earth busbar in the equipment room and to other earth pits, if any.g. Exothermic weld material shall be tested as per provisions of IEEE 837 by NABL/ILAC member labs.h. The main earth pit shall be located as near to the main equi-potential earth busbar in the equipment room as possible.B) Const.of Inspection Chambera. Inspection chamber should be as per IEC 62561-5 or latest.b. The dimension of the chamber will be of 300 x 300 x 300 mm (inside dimension) of RCC with 50 mm thick and fine finish.c. The marking space should be present an RCC cover.d. The date of testing and earth resistance value shall be written on the cover with black base with yellow paintC) Details of material to be used in above work and shall be provided by the contractor :1. Details of Electrode:(i) 3 Mtr Long 17.2 mm dia. 250 microns molecularly bonded copper over steel rod with pre welded 04 Nos of hole termination along with SS Bolt-nut, washer for fixing of interconnection and earth rod connection- 10 Set2. Earth Pit Chamber:(i) HDPE PVC Earth chamber with PVC cover having capacity of 5 Ton point Load of size 50cm x 50cm and Earth bar-01 No along with double hole and lugs and cements bags3. Grounding compound/Backfill Compound(i) Curec+( in 3kg bag): 02 Bags(ii) Curecon ( in 5Kg bags) : 02 Bags
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
