Tender For Construction Of 01 No. Type Iv Quarters Rcc Framed Structure Complete At Phek Battalion (Nagaland) And Construction Of 04 Nos. Type V Quarters (G+I) Rcc Framed Structure Complete At Phek Battalion (Nagaland)., Phek-Nagaland

TDR : 46878753

Tender Notice
Corrigendum Details
BOQ

Expired

Phek , Nagaland

Tender Brief : Corrigendum : Tender For Construction Of 01 No. Type Iv Quarters Rcc Framed Structure Complete At Phek Battalion (Nagaland) And Construction Of 04 Nos. Type V Quarters (G+I) Rcc Framed Structure Complete At Phek Battalion (Nagaland).

Document Fees
₹ 17346 /-

EMD
₹ 1463000.0 /-

Tender Value
₹ 7.31 Crore /-

Submission Date
14-01-2025

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Sr No	Corrigendum Date	Corrigendum	Type	New Submission Date
1	08-01-2025	CORRIGENDUM-1	Technical Bid	14-01-2025

Name of Work: Construction of 01 No. Type IV Quarters RCC Framed Structure Complete at Phek Battalion (Nagaland) AND Construction of 04 Nos. Type V Quarters (G+I) RCC Framed Structure Complete at Phek Battalion (Nagaland).

Sl. No.	Item Description
1	CONSTRUCTION OF 1 NOS TYPE IV QUARTERWITH ALLIED SERVICES AT PHEK BATTALION, NAGALAND.
2	DSR-CIVIL WORKS
3	EARTH WORK
4	Clearing jungle including uprooting of rank vegetation grass brush wood trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.
5	Surface dressing of the ground including removing vegetation and in equalities not exceeding 15 cm. Deep and disposal of rubbish, lead upto 50 m and lift up to 1.5 m
6	All kinds of soil
7	Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth 1.5 m in width as well as 10 sqm. On plan) including disposal of excavated earth lead up to 50 m and lift upto 1.5 mtr disposed earth to be levelled and neatly dressed.
8	All kinds of soil
9	Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials.
10	All kinds of soil
11	Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 and for all lift.
12	Supplying and filling in plinth with sand under floors including, watering, ramming consolidating and dressing complete.
13	Supplying chemical emulsion in sealed containers including delivery as specified
14	Chlorpyriphos / Lindane emulsifiable concentrate of 20%
15	Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :
16	Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc.:
17	With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration
18	Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor :
19	With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
20	CONCRETE WORK
21	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level.
22	1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources)
23	1:3:6 (1 cement : 3 coarse sand : (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal sizederived from natural sources )
24	1:4:8 (1 Cement : 4 coarse sand : (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
25	Providing and laying damp proof course 50 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
26	Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification.
27	Providing and applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
28	Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75 mm thick bed by dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation,leveiling & dressing & finishing the top smooth.
29	REINFORCED CEMENT CONCRETE WORK
30	Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work using coarse aggregate & fine aggregate derived from natural sources, portland pozzolana/ordinary portland/portland slag cement, admixtures in recomended proportions as per IS:9103 to accelerate/retard setting of concrete, to improve durability & workability without impairing strength , including pumping of concrete to site of laying, curing, carriage for all leads, but excluding the cost of centering, shuttering, finishing & reinforcement as per direction of the engineer-in-charge, for the following grades of concrete : Note : Extra cement upto 10% of the minimum specified cement content in design mix shall be payble seperately. In case the cement content in design mix is more than 110% of the specified minimum cement content,the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.
31	All works upto plinth level
32	Concrete of M25 grade with minimum cement content of 330kg/cum
33	All works above plinth level upto floor V level
34	Concrete of M25 grade with minimum cement content of 330kg/cum
35	Add for using extra cement in the items of design mix over and above the specified cement content therein.
36	Centering and shuttering including strutting propping etc. and removal of form work for :
37	Foundations, footings, bases of columns etc. for mass concrete.
38	Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
39	Suspended floors, roofs, landings, balconies and access platform.
40	Lintels, beams, plinth beams, girders, bressumers and cantilevers.
41	Columns, pillars, piers, abutments, posts and struts.
42	Stairs (excluding landings) except spiral staircases.
43	Weather shade, Chajjas, corbels etc., including edges
44	Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
45	Thermo-Mechanically treated bars of grade Fe-500D or more
46	Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.
47	Thermo-Mechanically treated bars of grade Fe-500D or more
48	BRICK WORK
49	Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:
50	Cement Mortar 1:4 (1 cement : 4 coarse sand).
51	Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :
52	Cement Mortar 1:6 (1 cement : 6 coarse sand).
53	Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand)
54	Coursed rubble masonry (first sort) with hard stone in foundation andplinth with :
55	Cement mortar 1:6 (1 cement : 6 coarse sand)
56	Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.
57	WOOD WORK
58	Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).
59	Kiln seasoned and chemically treated hollock wood
60	Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge.
61	Kiln seasoned and chemically treated hollock wood
62	35 mm thick shutters
63	Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick :
64	Kiln seasoned and chemically treated hollock wood
65	Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately):
66	12 mm thick
67	Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately).
68	18 mm thick
69	Providing and fixing ISI marked flush door shutters conforming to IS 2202 (part I) decorativie type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters
70	35 mm thick including ISI marked stainless steel butt hinges with necessary screws
71	25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. Piano hinges IS : 3818 marked with necessary screws
72	Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).
73	Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete. -40 mm
74	Providing and fixing 50 mm bright finished brass cup board or wardrobe knob of approved quality with necessary screws.
75	Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. Triple strip vertical type
76	Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete : 20 mm dia
77	Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. (Twin rubber stopper)
78	Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete.
79	250 x 16 mm
80	Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete.
81	200 x 10 mm
82	150 x 10 mm
83	Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 100 mm
84	Providing and fixing wire gauge shutters using galvanized MS wire gauge of average width and aperture 1.4 mm in both direction with wire of 0.63mm, for door windows and clerestory windows with hinges and necessary screws : 35mm thich shutter-Kiln seasoned and chemically treated hollock wood
85	Providing and fixing fly roof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3mm and nuts & bolts complete.
86	Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides.
87	STEEL WORK
88	Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners,all necessary fittings complete, including applying a priming coat of approved steel primer.
89	Using M.S. angels 40x40x6 mm for diagonal braces
90	Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.
91	Fixed to openings /wooden frames with rawl plugs screws etc.
92	Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
93	In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
94	Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works,including applying priming coat of approved steel primer.
95	M.S. tube
96	Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
97	Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing.
98	ALUMINIUM WORK
99	Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :
100	For fixed portion
101	Powder coated aluminium (minimum thickness of powder coating 50 micron)
102	For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)
103	Powder coated aluminium (minimum thickness of powder coating 50 micron)
104	Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.
105	With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)
106	Extra for providing frosted glass panes 4 mm thick(weight not less than 10kg/sqm) instead of ordinary float glass panes 4 mm thick(weight not less than 10kg/sqm) in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured).
107	Filling the gap in between aluminium / stone / wood frame and adjacent rcc / Brick / Stone / Wood / Ceramic / Gypsum work by providing weather / structuralnon sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-Charge complete, complying to ASTM C920, DIN 18540-F & ISO 11600
108	Upto 5 mm depth and 5 mm width
109	PLASTERING & POINTING WORK
110	Cement Plaster (In Coarse Sand)
111	12 mm cement plaster of mix : 1:6 (1 cement : 6 coarse sand)
112	15mm plaster on rough side of single brick work: 1:6 (1 cement : 6 coarse sand)
113	20 mm cement plaster of mix : 1:6 (1 cement : 6 coarse sand)
114	6 mm cement plaster of mix. 1:3 (1 cement : 3 fine sand)
115	Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers.
116	Extra for addition of synthetic Polyester triangular fibre of length 6 mm, effective diameter 10-40 microns and specific gravity of 1.34 to 1.40 in cement plaster/mortar by using 125 gms. of synthetic Polyester triangular fibre for 50 Kgs. cement used in cement mortar as per 50 Kg of directions of Engineer-in-Charge.
117	Neat cement punning
118	Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
119	Finishing walls with Acrylic Smooth exterior paint of required shade :
120	New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
121	Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :
122	Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture
123	Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.
124	Two coats
125	Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50gm/lit, of approved manufacturer & of required shade and colour complete to achive even shade & colour.
126	New work (Two or more coats) over & including water thinnable priming coat with cement primer having VOC content less than 50gm/lit sqm.
127	Applying priming coat :
128	With ready mixed red oxide zinc chromate primer ofapproved brand and manufacture on steel galvanised iron/steel works
129	Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.
130	With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre
131	With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre
132	FLOORING WORK
133	Providing and laying Vitrified tiles in floor in different sizes (thickness tobe specified by the manufacturer) with water absorption less than 0.08%and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gentlyand easily.
134	Double charge vitrified tile polished finish of size
135	Size of Tile 600 x 600 mm
136	Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joint with white cement & matching pigments etc. complete: Size of Tile 600x600 mm
137	Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thik
138	Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
139	Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc.,complete.
140	Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
141	Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.
142	40 mm thick with 20 mm nominal size stone aggregate
143	Providing and fixing glass strips in joints of terrazo/ cement concrete floors.
144	40 mm wide and 4 mm thick
145	Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement.
146	18 mm thick
147	WATER PROOFING TREATEMENT WORK
148	Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.
149	110 mm diameter
150	Providing and fixing on wall face unplasticised- PVC moulded fittings / accessories for unplasticised rigid PVC rain water pipes conforming to IS : 13592 type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.
151	Coupler - 110 mm
152	Single tee without door: 110x110x110 mm
153	Bend 87.5° :110 mm bend
154	Shoe (Plain): 110 mm
155	Providing and fixing unplasticised PVC pipe clips of approved design to unplasticised PVC rain water pipes by means of 50 x 50 x 50 mm hard wood plugs screwed with MS screws of required length including cuting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.: 110 mm
156	Providing and fixing to the inlet mouth of rain water pipes cast iron grating 15 cm diametre and weighing not less than 440 grams.
157	Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75 mm deep chase
158	Making khurras 45 x 45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1m x 1m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement rounding the edge and making and finishing the outlet complete.
159	Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)
160	Providing and laying in situ seven course water proofing treatment with APP (Atactic poly-propylene) modified Polymeric memberane over roof consisting of first coat of bitumen primer @ 0.40 litre per sqm, 2nd, 4th & 6th courses of bonding material @ 1.20 Kg/sqm,which shall consist of blown type bitumen of grade 85/25 conforming to IS : 702, 3rd and 5th layers of roofing membrane APP modified Polymeric membrane 1.5 mm thick of 2.25 Kg/sqm weight consisting of five layers prefabricated with centre core as 20 micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20 micron HMHDPE film. 7th, the top most layer shall be finished with brick tiles of class designation 10 grouted with cement mortar 1:3 (1cement : 3 fine sand) mixedwith 2% integral water proofing compound by weight of cement over a 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat (item of laying brick tiles shall be paid for separately).
161	Providing and fixing PVC Door Frame of size 50x47 mm with a wall thickness of 5 mm (± 0.2 mm), made out of single piece extruded PVC profile, with mitred cut joints and joint with 2 nos of PVC bracket of size 190 mm x 100 mm long arms of cross section size 35 x 15 mm & self driven self taping screws, the vertical door profiles to be reinforced with 40x20 mm M.S. rectangular tube of 0.8 mm , including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5 mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8 x100 mm long anchor fasteners complete, all as per manufacturer\"s specification and direction of Engineer -in- charge.
162	35 mm thick factory made Solid panel PVC Door shutter, made out of single piece extruded soild PVC profiles, 5 mm (± 0.2 mm) thick, having styles & rails (except lock rail) of size 95 mmx 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm X 20 mm x 1 mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mm X 100 mm of cross section size 35 mm x 17 mm x 1 mm at each corner. Single piece extruded 5 mm thick solid PVC Lock rail of size 115 mm x 35 mm, out of which 75 mm to be flat and 20 mm to be tapered at both ends, having 15 mm solid core in middle of rail section integrally extruded, fixing the styles & rails with the help of solvent and self driven self tapping screws of 125 mm x 11 mm, including providing 5 mm Single piece solid PVC extruded sheet inserted in the door as anel, all complete as per manufacturer\"s specification and direction of Engineerin-charge.
163	Non decorative finish (matt finish)
164	ROAD WORK
165	Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres.
166	Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.
167	80 mm thick C.C. paver block of M-30 grade with approved color design and pattern.
168	Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment).(Precast C.C. kerb stone shall be approved by Engineer-in-charge).
169	Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) in pavements, laid to required slope and camber in panels as required including consolidation finishing and tamping complete.
170	stone work
171	Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite stone slab of colour black,cherry/ruby red.
172	Area of slab over 0.50 sq.m.
173	DSR-SANITARY, WATER SUPPLY AND DRAINAGE WORKS
174	SUBHEAD NO. 1 : SANITARY INSTALLATIONS
175	Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast iron P or S trap, 10 litre low level while P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixures complete including cutting and making good the walls and flooors wherever required:
176	White vitreous china Orissa pattern W.C. pan of size 580X440 mm with integral type foot rests.
177	Providing and fixing white vitreous china pedestal type water closet (european Type W.C. pan) with seat and lid, 10 litre low level pvc flushing cistern,including flush pipe,with manualy controlled device within brackets handle lever,conforming to IS:7231,with all fittings & fixtures complete, including cutting and making good the walls & floors wherever required.
178	W.C. pan with ISI marked white solid plastic seat and lid
179	Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass piller taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required :
180	White vitreous China Wash basin size 630X450mm with a single 15 mm C.P. brass pillar tap
181	White vitreous China Flat back wash basin size 550 x 400 mm with single 15 mm C.P. brass piller taps
182	Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :
183	Kitchen sink with drain board: 510x1040 mm bowl depth 200 mm
184	Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
185	Semi rigid pipe: 32 mm dia
186	Providing and fixing CP brass 32mm size bottle trap of approved quality and make and as per the direction of EIC.
187	Providing and fixing CP brass single lever telephonic wall mixtureapproved quality and make and as per the direction of EIC. (a) 15mm nominal dia
188	Providing and fixing soil, waste and vent pipes
189	100 mm dia: Sand cast iron S&S pipe as per IS: 1729
190	Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes : 100mm
191	Providing and fixing M.S. holder-bat clamps of approved design to Sand cast iron (spun) pipe embedded in and including cement concrete blocks 10X10X10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including cost of cutting holes and making good the walls etc. For 100 mm dia Pipe
192	Providing and fixing bend of required degree with access door, insersion rubber washer 3mm thick, bolts and nuts complete.
193	100 mm: Sand cast iron S & S as per IS - 1729
194	Providing and fixing plain bend of required degree
195	100 mm: Sand cast iron S & S as per IS - 1729
196	Providing and fixing heel rest sanitary bend
197	100 mm: Sand cast iron S & S as per IS - 1729
198	Providing and fixing double equal junction of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete:
199	100X100X100X100 mm : Sand cast iron S & S as per IS - 1729
200	Providing and fixing single equal plain junction of required degree with door, insertion rubber washer 3 mm thick, bolts and nuts complete.
201	100X100X100 mm: Sand cast iron S & S as per IS - 1729
202	Providing and fixing single equal plain junction of required degree
203	100X100X100 mm: Sand cast iron S & S as per IS - 1729
204	Providing and fixing double unequal of junction required degree with door, insertion rubber washer 3 mm thick, bolts and nuts complete.
205	100X100X75X75 mm: Sand cast iron S & S as per IS - 1729
206	Providing and fixing terminal guard:
207	100 mm: Sand cast iron S & S as per IS - 1729
208	Providing and fixing collar :
209	100 mm Sand cast iron S & S as per IS - 1729
210	Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors:
211	100 mm inlet and 100 mm outlet; Sand cast iron S & S as per IS - 1729
212	Painting sand cast iron / centrifugally cast iron (spun) iron, soil, waste, vent pipes and fittings with two coats of synthetic enamel paint of any colour such as chocolate, grey of buff etc. over a coat of primer (of approved quality) for new work.
213	100 mm diameter pipe
214	Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.
215	Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with C.P brass screws with concealed fitting arrangement of approved quality colour.
216	600 mm long towel rail with total length of 645 mm width 78 mm and effective height of 88 mm, weighing not less than 190 gms
217	Providing and fixing PTMT soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality colour and make, weighing not less than 105 gms.
218	Providing and fixing 600 X 450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with CP brass screws and washers complete .
219	Providing and fixing 600X120X5 mm glass shelf with edges round of supported on anodised aluminium angle frame with CP brass brackets and guardrail complete fixed with 40 mm long screws, rawl plugs etc. complete
220	SUBHEAD NO. 2 : WATER SUPPLY
221	Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS 15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes testing of joints complete as per direction of Engineer-in-Charge.Internal Work: Exposed on wall
222	PN - 16 Pipe, 20mm OD (SDR-7.4)
223	PN - 16 Pipe, 25mm OD (SDR-7.4)
224	PN - 16 Pipe, 32mm OD (SDR-7.4)
225	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.
226	15mm dia nominal bore
227	20mm dia nominal bore
228	Providing and fixing 3 layer PP-R (Poly propylene Random copolymer)pipes confirming to IS:15801 UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, including trenching, refilling & testing of joints complete as per direction of Engineer-in-Charge.External Work
229	PN - 16 Pipe, 40 mm OD (SDR-7.4)
230	Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end)
231	25mm nominal bore
232	32 mm nominal bore
233	Providing and fixing brass stop cock of approved quality
234	15mm nominal bore
235	20mm nominal bore
236	Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :
237	25 mm nominal bore
238	Providing and fixing gun metal non-return valve of approved quality (screwed end):40mm nominal bore
239	vertical
240	Providing and fixing CP Brass shower rose with 15 or 20mm inlet:
241	100mm dia.
242	Providing and placing on terrace (at all floor levels) polythene water storage tank ISI:12701marked with cover and suitable locking arrangement and making necessary hole for inlet, outlet and overflow pipe but without fittings and the support for tank
243	Providing and fixing PTMT, push cock of approved quality and colour.
244	15 mm nominal bore, 98 mm long, weighing not less than 75 gms
245	Providing and fixing PTMT grating of approved quality and colour.Circular type
246	100 mm nominal dia
247	125 mm nominal dia with 25 mm waste hole
248	Providing and fixing C.P. brass bib cock of approved quality conforming to IS 8931.
249	15 mm nominal bore
250	Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms
251	15 mm nominal bore
252	Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS : 8931
253	15 mm nominal bore
254	Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931
255	15mm nominal bore
256	SUBHEAD NO. 3 : DRAINAGE
257	Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete
258	150 mm diameter
259	Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design:
260	150 mm diameter S. W. pipe
261	Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kind of soil
262	Pipes, cables etc. exceeding 80 mm dia. but notexceeding 300 mm dia
263	Providing and fixing square-mouth S.W gully trap class SP-1 complete with C.I. grating brick masonary chamber with water tight C.I. cover with frame of 300X300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 180 X 150 mm size P type
264	With common burnt clay F.P.S. (non- modular) Bricks class designation 7.5
265	Constructingbrick masonary manholein cement mortar 1:4 (1 cement: 4 coarse sand) RCC top slab with 1:1.5:3 mix (1 cement:1.5 coarse sand(zone-III):3 graded stone aggregate 20 mm nominal size) fondation concrete 1:4:8 mix(1 cement: 4 coarse sand:(zone-III) 8 graded stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement and making channel in cement concrete 1:2:4 ( 1 cement: 2 coarse sand: 4 graded stone aggregated 20 mm nominal size) finished with a floating coat of a neat cement complete as per standard design.
266	Inside size 90x80 cm and 45 cm deep including C.I.cover with frame (light duty) 455x610 mm internal dimensions totalweight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg.):
267	With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
268	Extra for depth for manholes, Size 90 X 80 cm
269	With common burnt clay F.P.S. (non modular) bricks with class designation 7.5
270	Making soak pit 2.5 m diameter 3.0 metre deep with 45X45cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8 long complete as per standard design
271	With common burnt clay F.P.S. (non- modular) Bricks class designation 7.5
272	DSR-INTERNAL AND EXTERNAL ELECTRICAL WORKS
273	WIRING
274	Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.
275	Group B
276	Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required
277	2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
278	2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
279	2 X 4 sq. mm + 1 X 4 sq. mm earth wire
280	Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
281	5/6 amps switch
282	3 pin 5/6 amp socket outlet
283	Supplying & fixing call bell/ buzzer suitable for single phase,230 volts, complete as required.
284	Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
285	Supplying and fixing modular blanking plate on the exixting modular plate and switch box excluding modular plate as reqd.
286	Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and switch, connection etc. as required. (For light plugs to be used in non residential buildings).
287	Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.
288	Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.
289	Upto 450 mm sweep
290	MCCB, MCB & DB’S
291	Supplying and fixing following way,horizontal type three pole and neutral,sheet steel MCB distribution board, 415 volts on surface/ recess, complete with tinned copper bus bar,neutral bus bar, earth bar,din bar,interconnections,powder painted including earthing etc. as required.(But without MCB/ RCCB/ Isolator)
292	6 way (4 + 18), Double door
293	Supplying and fixing 5 amps to 32 amps rating, 240/415 volts,10 Ka, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
294	Single pole
295	Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.
296	40 amps
297	Providing and fixing M.V. danger notice plate of 200 mm X 150mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.
298	EARTHING
299	Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required.
300	Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.
301	Supplying and laying 25 mm X 5 mm copper strip at 0.50 metrebelow ground as strip earth electrode, including connection/terminating with nut, bolt, spring, washer etc. as required.(Jointing shall be done by overlapping and with 2 sets of brassnut bolt & spring washer spaced at 50mm)
302	LIGHTNING CONDUCTOR
303	Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, GItube, having single prong at top, with 85 mm dia 3 mm thick GIbase plate including holes etc. complete as required.
304	Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For horizontal run)
305	Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For vertical run)
306	Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required.
307	Erection of metallic pole of following length in cement concrete1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size) foundation including excavation and refillingetc. as required.
308	Above 6.5 metre and upto 8.0 metre
309	MV CABLE LAYING
310	Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.
311	Upto 35 sq. mm
312	MV CABLE JOINTING & END TERMINATION
313	Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
314	2 X 6 sq. mm (19mm)
315	4 X 16 sq. mm (28mm)
316	Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable and earthing etc. as required.
317	Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc., including supplying and fixing ball and socket arrangement, 2 no. down rods of 20 mm dia X 1.6 mm thick steel conduit upto 30 cm length, painting and wiring the down rods and connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
318	Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.
319	Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.
320	Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep) and re-filling etc as required
321	100 mm dia
322	CONSTRUCTION OF 1 NOS TYPE IV QUARTERWITH ALLIED SERVICES AT PHEK BATTALION, NAGALAND.
323	DSR-CIVIL WORKS
324	EARTH WORK
325	Clearing jungle including uprooting of rank vegetation grass brush wood trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.
326	Surface dressing of the ground including removing vegetation and in equalities not exceeding 15 cm. Deep and disposal of rubbish, lead upto 50 m and lift up to 1.5 m
327	All kinds of soil
328	Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth 1.5 m in width as well as 10 sqm. On plan) including disposal of excavated earth lead up to 50 m and lift upto 1.5 mtr disposed earth to be levelled and neatly dressed.
329	All kinds of soil
330	Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials.
331	All kinds of soil
332	Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 and for all lift.
333	Supplying and filling in plinth with sand under floors including, watering, ramming consolidating and dressing complete.
334	Supplying chemical emulsion in sealed containers including delivery as specified
335	Chlorpyriphos / Lindane emulsifiable concentrate of 20%
336	Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc.:
337	With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration
338	Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor :
339	With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
340	CONCRETE WORK
341	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level.
342	1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources)
343	1:3:6 (1 cement : 3 coarse sand : (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal sizederived from natural sources )
344	1:4:8 (1 Cement : 4 coarse sand : (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
345	Providing and laying damp proof course 50 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
346	Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification.
347	Providing and applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
348	Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75 mm thick bed by dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation,leveiling & dressing & finishing the top smooth.
349	REINFORCED CEMENT CONCRETE WORK
350	Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work using coarse aggregate & fine aggregate derived from natural sources, portland pozzolana/ordinary portland/portland slag cement, admixtures in recomended proportions as per IS:9103 to accelerate/retard setting of concrete, to improve durability & workability without impairing strength , including pumping of concrete to site of laying, curing, carriage for all leads, but excluding the cost of centering, shuttering, finishing & reinforcement as per direction of the engineer-in-charge, for the following grades of concrete : Note : Extra cement upto 10% of the minimum specified cement content in design mix shall be payble seperately. In case the cement content in design mix is more than 110% of the specified minimum cement content,the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.
351	All works upto plinth level
352	Concrete of M25 grade with minimum cement content of 330kg/cum
353	All works above plinth level upto floor V level
354	Concrete of M25 grade with minimum cement content of 330kg/cum
355	Add for using extra cement in the items of design mix over and above the specified cement content therein.
356	Centering and shuttering including strutting propping etc. and removal of form work for :
357	Foundations, footings, bases of columns etc. for mass concrete.
358	Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
359	Suspended floors, roofs, landings, balconies and access platform.
360	Lintels, beams, plinth beams, girders, bressumers and cantilevers.
361	Columns, pillars, piers, abutments, posts and struts.
362	Stairs (excluding landings) except spiral staircases.
363	Weather shade, Chajjas, corbels etc., including edges
364	Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
365	Thermo-Mechanically treated bars of grade Fe-500D or more
366	Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.
367	Thermo-Mechanically treated bars of grade Fe-500D or more
368	BRICK WORK
369	Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:
370	Cement Mortar 1:4 (1 cement : 4 coarse sand).
371	Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :
372	Cement Mortar 1:6 (1 cement : 6 coarse sand).
373	Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.
374	Cement mortar 1:4 (1 cement :4 coarse sand)
375	Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.
376	WOOD WORK
377	Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).
378	Kiln seasoned and chemically treated hollock wood
379	Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge.
380	Kiln seasoned and chemically treated hollock wood 35 mm thick shutters
381	Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick :
382	Kiln seasoned and chemically treated hollock wood
383	Providing and fixing ISI marked flush door shutters conforming to IS 2202 (part I) decorativie type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters
384	35 mm thick including ISI marked stainless steel butt hinges with necessary screws
385	25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. Piano hinges IS : 3818 marked with necessary screws
386	Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete :
387	2nd class teak wood: 50x12 mm
388	Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).
389	Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately):
390	12 mm thick
391	Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately).
392	18 mm thick
393	Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.
394	Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete.
395	250 x 16 mm
396	Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete.
397	200 x 10 mm
398	150 x 10 mm
399	Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :
400	100 mm
401	Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete.
402	40 mm
403	Providing and fixing 50 mm bright finished brass cup board or wardrobe knob of approved quality with necessary screws.
404	Providing and fixing magnetic catcher of approved quality in cupboard /ward robe shutters, including fixing with necessary screws etc. complete.
405	Triple strip vertical type
406	Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete :
407	20 mm dia
408	Providing and fixing wire gauge shutters using galvanized MS wire gauge of average width and aperture 1.4 mm in both direction with wire of 0.63mm, for door windows and clerestory windows with hinges and necessary screws : 35mm thich shutter-Kiln seasoned and chemically treated hollock wood
409	Providing and fixing fly roof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3mm and nuts & bolts complete.
410	Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides.
411	STEEL WORK
412	Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners,all necessary fittings complete, including applying a priming coat of approved steel primer.
413	Using M.S. angels 40x40x6 mm for diagonal braces
414	Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.
415	Fixed to openings /wooden frames with rawl plugs screws etc.
416	Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
417	In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
418	Providing and fixing stainless steel ( Grade 304) railing made of Hollowtubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)
419	Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works,including applying priming coat of approved steel primer.
420	M.S. tube
421	Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
422	Supplying and fixing rolling shutters make, made of required siae M.S. laths, interlocked togeather through their entire length snd joined togeather at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequste strength conforming to IS: 4454-part 1 and M.S. top cover of required thickness for rolling shutters.
423	80x1.25 mm M.S. laths with 1.25 mm thick top cover
424	Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing.
425	ALUMINIUM WORK
426	Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :
427	For fixed portion
428	Powder coated aluminium (minimum thickness of powder coating 50 micron)
429	For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)
430	Powder coated aluminium (minimum thickness of powder coating 50 micron)
431	Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.
432	With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)
433	Extra for providing frosted glass panes 4 mm thick(weight not less than 10kg/sqm) instead of ordinary float glass panes 4 mm thick(weight not less than 10kg/sqm) in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured).
434	Providing and fixing stainless steel (SS 304 grade) adjustable friction windows stays of approved quality with necessary stainless steel screws etc. to the side hung windows as per direction of Engineer in- charge complete.
435	255 X 19 mm
436	Filling the gap in between aluminium / stone / wood frame and adjacent rcc / Brick / Stone / Wood / Ceramic / Gypsum work by providing weather / structuralnon sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-Charge complete, complying to ASTM C920, DIN 18540-F & ISO 11600
437	Upto 5 mm depth and 5 mm width
438	Upto 10 mm depth and 10 mm width
439	PLASTERING & POINTING WORK
440	Cement Plaster (In Coarse Sand)
441	12 mm cement plaster of mix :1:6 (1 cement : 6 coarse sand)
442	15mm plaster on rough side of single brick work 1:6 (1 cement : 6 coarse sand)
443	20 mm cement plaster of mix : 1:6 (1 cement : 6 coarse sand)
444	6 mm cement plaster of mix. 1:3 (1 cement : 3 fine sand)
445	Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers.
446	Extra for addition of synthetic Polyester triangular fibre of length 6 mm, effective diameter 10-40 microns and specific gravity of 1.34 to 1.40 in cement plaster/mortar by using 125 gms. of synthetic Polyester triangular fibre for 50 Kgs. cement used in cement mortar as per 50 Kg of directions of Engineer-in-Charge.
447	Neat cement punning
448	Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
449	Finishing walls with Acrylic Smooth exterior paint of required shade :
450	New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
451	Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :
452	Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture
453	Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.
454	Two coats
455	Applying priming coat :
456	With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works
457	Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.
458	With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre
459	With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre
460	Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50gm/lit, of approved manufacturer & of required shade and colour complete to achive even shade & colour.
461	New work (Two or more coats) over & including water thinnable priming coat with cement primer having VOC content less than 50gm/lit sqm.
462	FLOORING WORK
463	Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08%and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Double charge vitrified tile polished finish of size
464	Size of Tile 600 x 600 mm
465	Size of tile 600 x 1200 mm
466	Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joint with white cement & matching pigments etc. complete
467	Size of Tile 600x600 mm
468	Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :
469	25 mm thick
470	Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
471	Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.
472	Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS :15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
473	Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.
474	40 mm thick with 20 mm nominal size stone aggregate
475	Providing and fixing glass strips in joints of terrazo/ cement concrete floors.
476	40 mm wide and 4 mm thick
477	Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement.
478	18 mm thick
479	Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite stone slab of colour black,cherry/ruby red.
480	Area of slab over 0.50 sq.m.
481	Extra for providing edge moulding to 18 mm thick marble stone counters, vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge.
482	Granite work
483	Extra for providing opening of required size & shape for wash basin/kitchen sink in kitchen platform, vanity counter and similar location in marble/Granite/stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
484	WATER PROOFING TREATEMENT WORK
485	Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.
486	110 mm diameter
487	Providing and fixing on wall face unplasticised- PVC moulded fittings / accessories for unplasticised rigid PVC rain water pipes conforming to IS : 13592 type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.
488	Coupler 110 mm
489	Single tee without door110x110x110 mm
490	Bend 87.5°110 mm bend
491	Shoe (Plain)110 mm
492	Providing and fixing unplasticised PVC pipe clips of approved design to unplasticised PVC rain water pipes by means of 50 x 50 x 50 mm hard wood plugs screwed with MS screws of required length including cuting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete
493	110 mm
494	Providing and fixing to the inlet mouth of rain water pipes cast iron grating 15 cm diametre and weighing not less than 440 grams.
495	Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :
496	In 75x75 mm deep chase
497	Making khurras 45 x 45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1m x 1m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement rounding the edge and making and finishing the outlet complete.
498	Grading roof for water proofing treatment with
499	Cement concrete 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate 20mm nominal size)
500	Providing and laying in situ seven course water proofing treatment with APP (Atactic poly-propylene) modified Polymeric memberane over roof consisting of first coat of bitumen primer @ 0.40 litre per sqm, 2nd, 4th & 6th courses of bonding material @ 1.20 Kg/sqm, which shall consist of blown type bitumen of grade 85/25 conforming to IS : 702, 3rd and 5th layers of roofing membrane APP modified Polymeric membrane 1.5 mm thick of 2.25 Kg/sqm weight consisting of five layers prefabricated with centre core as 20 micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20 micron HMHDPE film. 7th, the top most layer shall be finished with brick tiles of class designation 10 grouted with cement mortar 1:3 (1cement : 3 fine sand) mixedwith 2% integral water proofing compound by weight of cement over a 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat (item of laying brick tiles shall be paid for separately).
501	Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage.
502	For vertical surface two coats @ 0.70 kg per sqm
503	For horizontal surface one coat @1.10 kg per sqm.
504	Providing and fixing PVC Door Frame of size 50x47 mm with a wall thickness of 5 mm (± 0.2 mm), made out of single piece extruded PVC profile, with mitred cut joints and joint with 2 nos of PVC bracket of size 190 mm x 100 mm long arms of cross section size 35 x 15 mm & self driven self taping screws, the vertical door profiles to be reinforced with 40x20 mm M.S. rectangular tube of 0.8 mm , including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5 mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8 x100 mm long anchor fasteners complete, all as per manufacturer\"s specification and direction of Engineer -in- charge.
505	35 mm thick factory made Solid panel PVC Door shutter, made out of single piece extruded soild PVC profiles, 5 mm (± 0.2 mm) thick, having styles & rails (except lock rail) of size 95 mmx 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm X 20 mm x 1 mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mm X 100 mm of cross section size 35 mm x 17 mm x 1 mm at each corner. Single piece extruded 5 mm thick solid PVC Lock rail of size 115 mm x 35 mm, out of which 75 mm to be flat and 20 mm to be tapered at both ends, having 15 mm solid core in middle of rail section integrally extruded, fixing the styles & rails with the help of solvent and self driven self tapping screws of 125 mm x 11 mm, including providing 5 mm Single piece solid PVC extruded sheet inserted in the door as anel, all complete as per manufacturer\"s specification and direction of Engineerin-charge.
506	Non decorative finish (matt finish)
507	AREA DEVELOPMENT, ROAD, RETAING WALL
508	Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth 1.5 m in width as well as 10 sqm. On plan) including disposal of excavated earth lead up to 50 m and lift upto 1.5 mtr disposed earth to be levelled and neatly dressed.
509	All kinds of soil
510	Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width aswell as 10 sqm on plan) including getting out and disposal of excavatedearth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge.
511	Ordinary rock
512	Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials.
513	All kinds of soil
514	Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 and for all lift.
515	Coursed rubble masonry (first sort) with hard stone in foundation andplinth with :
516	Cement mortar 1:6 (1 cement : 6 coarse sand)
517	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level.
518	1:3:6 (1 cement : 3 coarse sand : (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal sizederived from natural sources )
519	1:4:8 (1 Cement : 4 coarse sand : (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
520	Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work using coarse aggregate & fine aggregate derived from natural sources, portland pozzolana/ordinary portland/portland slag cement, admixtures in recomended proportions as per IS:9103 to accelerate/retard setting of concrete, to improve durability & workability without impairing strength , including pumping of concrete to site of laying, curing, carriage for all leads, but excluding the cost of centering, shuttering, finishing & reinforcement as per direction of the engineer-in-charge, for the following grades of concrete :Note :Extra cement upto 10% of the minimum specified cement content in design mix shall be payble seperately. In case the cement content in design mix is more than 110% of the specified minimum cement content,the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.
521	All works upto plinth level.Concrete of M25 grade with minimum cement content of 330kg/cum
522	Add for using extra cement in the items of design mix over and above the specified cement content therein.
523	Centering and shuttering including strutting propping etc. and removal of form work for :
524	Foundations, footings, bases of columns etc. for mass concrete.
525	Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
526	Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
527	Thermo-Mechanically treated bars of grade Fe-500D or more
528	Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres.
529	Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.
530	80 mm thick C.C. paver block of M-30 grade with approved color design and pattern.
531	Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment).(Precast C.C. kerb stone shall be approved by Engineer-in-charge).
532	DSR-SANITARY, WATER SUPPLY AND DRAINAGE WORKS
533	SUBHEAD NO. 1 : SANITARY INSTALLATIONS
534	Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast iron P or S trap, 10 litre low level while P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixures complete including cutting and making good the walls and flooors wherever required:
535	White vitreous china Orissa pattern W.C. pan of size 580X440 mm with integral type foot rests.
536	Providing and fixing white vitreous china pedestal type water closet (european Type W.C. pan) with seat and lid, 10 litre low level pvc flushing cistern,including flush pipe,with manualy controlled device within brackets handle lever,conforming to IS:7231,with all fittings & fixtures complete, including cutting and making good the walls & floors wherever required.
537	W.C. pan with ISI marked white solid plastic seat and lid
538	Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/6 litre (adjustable to 4 litre/8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete.
539	Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass piller taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required :
540	White vitreous China Wash basin size 630X450mm with a single 15 mm C.P. brass pillar tap
541	White vitreous China Flat back wash basin size 550 x 400 mm with single 15 mm C.P. brass piller taps
542	Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :
543	Kitchen sink with drain board
544	510x1040 mm bowl depth 200 mm
545	Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
546	Semi rigid pipe 32 mm dia
547	Providing and fixing CP brass 32mm size bottle trap of approved quality and make and as per the direction of EIC.
548	Providing and fixing CP brass single lever telephonic wall mixtureapproved quality and make and as per the direction of EIC. (a) 15mm nominal dia
549	Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :
550	Rectangular shape 1500x450 mm
551	Providing and fixing soil, waste and vent pipes
552	100 mm dia, Sand cast iron S&S pipe as per IS: 1729
553	Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes :
554	100mm
555	Providing and fixing M.S. holder-bat clamps of approved design to Sand cast iron (spun) pipe embedded in and including cement concrete blocks 10X10X10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including cost of cutting holes and making good the walls etc.
556	For 100 mm dia Pipe
557	Providing and fixing bend of required degree with access door, insersion rubber washer 3mm thick, bolts and nuts complete.
558	100 mm Sand cast iron S & S as per IS - 1729
559	Providing and fixing plain bend of required degree
560	100 mm Sand cast iron S & S as per IS - 1729
561	Providing and fixing heel rest sanitary bend
562	100 mm Sand cast iron S & S as per IS - 1729
563	Providing and fixing double equal junction of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete:
564	100X100X100X100 mm Sand cast iron S & S as per IS - 1729
565	Providing and fixing single equal plain junction of required degree with door, insertion rubber washer 3 mm thick, bolts and nuts complete.
566	100X100X100 mm Sand cast iron S & S as per IS - 1729
567	Providing and fixing single equal plain junction of required degree
568	100X100X100 mm Sand cast iron S & S as per IS - 1729
569	Providing and fixing double unequal of junction required degree with door, insertion rubber washer 3 mm thick, bolts and nuts complete.
570	100X100X75X75 mm; Sand cast iron S & S as per IS - 1729
571	Providing and fixing sand cast iron S & S off sets as per IS : 1729.
572	152 mm off sets With100 mm dia pipe
573	Providing and fixing terminal guard:
574	100 mm Sand cast iron S & S as per IS - 1729
575	Providing and fixing collar :
576	100 mm Sand cast iron S & S as per IS - 1729
577	Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors:
578	100 mm inlet and 100 mm outlet Sand cast iron S & S as per IS - 1729
579	Painting sand cast iron / centrifugally cast iron (spun) iron, soil, waste, vent pipes and fittings with two coats of synthetic enamel paint of any colour such as chocolate, grey of buff etc. over a coat of primer (of approved quality) for new work.
580	100 mm diameter pipe
581	Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.
582	Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with C.P brass screws with concealed fitting arrangement of approved quality colour.
583	600 mm long towel rail with total length of 645 mm width 78 mm and effective height of 88 mm, weighing not less than 190 gms
584	Providing and fixing PTMT soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality colour and make, weighing not less than 105 gms.
585	Providing and fixing 600 X 450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with CP brass screws and washers complete .
586	Providing and fixing 600X120X5 mm glass shelf with edges round of supported on anodised aluminium angle frame with CP brass brackets and guardrail complete fixed with 40 mm long screws, rawl plugs etc. complete
587	SUBHEAD NO. 2 : WATER SUPPLY
588	Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS 15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes testing of joints complete as per direction of Engineer-in-Charge. Internal Work: Exposed on wall
589	PN - 16 Pipe, 20mm OD (SDR-7.4)
590	PN - 16 Pipe, 25mm OD (SDR-7.4)
591	PN - 16 Pipe, 32mm OD (SDR-7.4)
592	PN - 16 Pipe, 40mm OD (SDR-7.4)
593	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.
594	15mm dia nominal bore
595	20mm dia nominal bore
596	Providing and fixing 3 layer PP-R (Poly propylene Random copolymer)pipes confirming to IS:15801 UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, including trenching, refilling & testing of joints complete as per direction of Engineer-in-Charge. External Work
597	PN - 16 Pipe, 40 mm OD (SDR-7.4)
598	Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end)
599	25mm nominal bore
600	32 mm nominal bore
601	Providing and fixing brass stop cock of approved quality
602	15mm nominal bore
603	20mm nominal bore
604	Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :
605	25 mm nominal bore
606	Providing and fixing gun metal non-return valve of approved quality (screwed end):
607	40mm nominal bore;vertical
608	Providing and fixing CP Brass shower rose with 15 or 20mm inlet:
609	100mm dia.
610	Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in reiforced cement concrete slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), including necessary excavation, foundationconcrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design :
611	With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
612	Providing and placing on terrace (at all floor levels) polythene water storage tank ISI:12701marked with cover and suitable locking arrangement and making necessary hole for inlet, outlet and overflow pipe but without fittings and the support for tank
613	Providing and fixing PTMT, push cock of approved quality and colour.
614	15 mm nominal bore, 98 mm long, weighing not less than 75 gms
615	Providing and fixing PTMT grating of approved quality and colour.
616	Circular type 100 mm nominal dia
617	125 mm nominal dia with 25 mm waste hole
618	Providing and fixing C.P. brass bib cock of approved quality conforming to IS 8931.
619	15 mm nominal bore
620	Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms
621	15 mm nominal bore
622	Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS : 8931
623	15 mm nominal bore
624	Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931
625	15mm nominal bore
626	Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof.
627	Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc.
628	(above 2 items can be executed only upon approval from engineer-in-charge)
629	SUBHEAD NO. 3 : DRAINAGE
630	Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete
631	150 mm diameter
632	Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-roundS.W. pipes including bed concrete as per standard design:
633	150 mm diameter S. W. pipe
634	Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design:
635	150 mm diameter S. W. pipe
636	Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :
637	All kind of soil
638	Pipes, cables etc. exceeding 80 mm dia. but notexceeding 300 mm dia
639	Providing and fixing square-mouth S.W gully trap class SP-1 complete with C.I. grating brick masonary chamber with water tight C.I. cover with frame of 300X300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:
640	180 X 150 mm size P type
641	With common burnt clay F.P.S. (non- modular) Bricks class designation 7.5
642	Constructingbrick masonary manholein cement mortar 1:4 (1 cement: 4 coarse sand) RCC top slab with 1:1.5:3 mix (1 cement:1.5 coarse sand(zone-III):3 graded stone aggregate 20 mm nominal size) fondation concrete 1:4:8 mix(1 cement: 4 coarse sand:(zone-III) 8 graded stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement and making channel in cement concrete 1:2:4 ( 1 cement: 2 coarse sand: 4 graded stone aggregated 20 mm nominal size) finished with a floating coat of a neat cement complete as per standard design.
643	Inside size 90x80 cm and 45 cm deep including C.I.cover with frame (light duty) 455x610 mm internal dimensions totalweight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg.):
644	With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
645	Extra for depth for manholes
646	Size 90 X 80 cm
647	With common burnt clay F.P.S. (non modular) bricks with class designation 7.5
648	Making soak pit 2.5 m diameter 3.0 metre deep with 45X45cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8 long complete as per standard design
649	With common burnt clay F.P.S. (non- modular) Bricks class designation 7.5
650	DSR-INTERNAL AND EXTERNAL ELECTRICAL WORKS
651	WIRING
652	Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.
653	Group B
654	Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required
655	2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
656	2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
657	2 X 4 sq. mm + 1 X 4 sq. mm earth wire
658	4 X 10 sq. mm + 2 X 6 sq. mm earth wire
659	Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
660	5/6 amps switch
661	3 pin 5/6 amp socket outlet
662	Supplying & fixing call bell/ buzzer suitable for single phase,230 volts, complete as required.
663	Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
664	Supplying and fixing modular blanking plate on the exixting modular plate and switch box excluding modular plate as reqd.
665	Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and switch, connection etc. as required. (For light plugs to be used in non residential buildings).
666	Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.
667	Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.
668	Upto 450 mm sweep
669	MCCB, MCB & DB’S
670	Supplying and fixing following way,horizontal type three pole and neutral,sheet steel MCB distribution board, 415 volts on surface/ recess, complete with tinned copper bus bar,neutral bus bar,earth bar, dinbar ,interconnections, powder painted including earthing etc. as required.(But without MCB/ RCCB/ Isolator)
671	6 way (4 + 18), Double door
672	Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)
673	8 way (4 + 24), Double door
674	Supplying and fixing 5 amps to 32 amps rating, 240/415 volts,10 Ka, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
675	Single pole
676	Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.
677	100 amps
678	Providing and fixing M.V. danger notice plate of 200 mm X 150mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.
679	EARTHING
680	Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required.
681	Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.
682	Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/terminating with nut, bolt, spring, washer etc. as required.(Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)
683	LIGHTNING CONDUCTOR
684	Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, GItube, having single prong at top, with 85 mm dia 3 mm thick GIbase plate including holes etc. complete as required.
685	Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For horizontal run)
686	Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For vertical run)
687	Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required.
688	Erection of metallic pole of following length in cement concrete 1:3:6(1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.
689	Above 6.5 metre and upto 8.0 metre
690	MV CABLE LAYING
691	Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.
692	Upto 35 sq. mm
693	MV CABLE JOINTING & END TERMINATION
694	Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
695	2 X 6 sq. mm (19mm)
696	4 X 25 sq. mm (28mm)
697	Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable and earthing etc. as required.
698	Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc., including supplying and fixing ball and socket arrangement, 2 no. down rods of 20 mm dia X 1.6 mm thick steel conduit upto 30 cm length, painting and wiring the down rods and connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
699	Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.
700	Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.
701	Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required
702	100 mm dia
703	Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required.
704	100 mm dia
705	150 mm dia
706	CONSTRUCTION OF 1 NOS TYPE IV QUARTERWITH ALLIED SERVICES AT PHEK BATTALION, NAGALAND.
707	P/I metering arrangement in MS enclosure matching with thevetical /HorizotalTPDB to be fixed at the top of the DB i/c matching color as per following:
708	0-500v, analog voltmeter with VSS control fuse-1set, LED indicating lamp-3nos; MAKE: AE/L&T
709	Supplying , transportation & delivery at sight of 7M long MS steel tubular pole type 410 SP-3, with one coat of MS primer paint, and as per IS: 2713-1986 includingMS bracketat the top about 0.7m long projection single arm arch bracket with 40m dia MS nipple for holding light fittings, , base plate, cap, earthing stud etc. with supply and fixing of weather proof 16 SWG thick G.I. Loop- box atthe pole base weather proof type of 200 X 150X100 mm size having front with locking arrangement and with 4 pole terminal supported on insulators, 1 No. 15A kitkat fuse, earthing stud , duly connected, 2 Nos. 32mm bore polythene pipe embedded in concrete for cable entry & outgoing etc. as required.(The concrete foundation size : Under ground 400 x 400 x 1150 (depth) with above ground pedestral of 300 x 300 x 450,where loop boox to be accomodated. Erection of pole to be paid separetly.) Make : SUBHAM POLES or Equiv.
710	Providing & installing pole wiring with 3 x 1.5 sq.mm PVC copper wire including earthing the pole and connecting to Loop in and Loop out box to installed at the base of the pole with connection and installed the M.S. box in cement concrete foundation. The pole shall be painted with 2 coats of aluminium paint over single coat of MS primer paint as per direction of E/I.
711	Supply and installation of streetlight fittingincluding 45W LED, Smart Bright Essential and 40mm dia MS pipe of suitable length with clamping, wiring, connection as reqd. Philips cat no. BRP031 LED45 CW SLR GR PSU SPD OR EQIV.
712	Supply & installation of GI earth spike of about 20mm dia X 1800 mm long in ground near each street pole including supply & installation of 8 SWG GI wire from earth spike to earthing bolt of street pole through 3/4\" PVC pipe installed in Pole foundation, connection as required.
713	Supply of Alluminium conductor, PVC/XLPE insulated, armoured, overall PVC sheathed 1100 Volts Grade Power Cables Confirming to IS 1554 / 7098 ( Part - I ) 1988 with latest amendments of following sizes :
714	2C X 6 sq. mm
715	4 X 16 sq. mm (28mm)
716	Supply , transportation and delivery at site singleIndoor 20W LED Tube light Batten type Fitting complete. Model - Essential SmartBright Batten, Equivalent to Philips cat no. BN170C LED20S-6500 PSU L120. or Equivalent.
717	Supplying & Fixing surface ceiling/wall mounted 20W LED decorative round downlighter, Model -Sleek Surface Prosimilar to Philips Cat No - SM296C LED20S-6500 PSU WH or Equivalent.
718	Supplying & Fixing surface ceiling/wall mounted 20W LED decorative round downlighter, Model -Sleek Surface similar to Philips Cat No - SM251/261 LED20S 6500 PSU WH or Equivalent.
719	Supply & Fixing ofstreet light fitting including 25W LED, Smart Bright Essential, Philips BRP029 LED25 CW SLR GR PSU SPD OR EQIV..
720	Supply , transportation and delivery at site following size of Ceiling/ Exhaust/wall bracket/PadestalFan of following description as reqd.(Usha/Bajaj/Khaitan/EPC or eqv.
721	1200mm(48\") sweep AC Ceiling Fan, Model striker 1 STAR (safety wire) & S3/P2 capacitor complete with downrod/Blade/ canopy.
722	1400mm(56\") sweep AC Ceiling Fan, Model striker 1 STAR (safety wire) & S3/P2 capacitor complete with downrod/Blade/ canopy.
723	Metal exhaust light duty 230mm(9\") Aeroclean LD GBD AC exhaust fan.
724	Supply of Al Louver for 230 mm exhaust fan
725	Fixing only outdoor street light type fluorescent light fitting or MV light fitting complete with allaccessories to be fixed /projected from the wall of the building incl. making holes/providing clampingarrangement & necy. GI reducer as required. S&F 40 mm GI pipe (ISI-Medium) quality 1.5 mts.average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall incl. painting etc.
726	S.I.T.C. of ISI marked 9 Ltr. capacity Water typeportable fire extinguisher (IS:15683), with gun-metal cap and nozzle including initial fill & wall suspension bracket and complete in all respect with all labour, tools & plants, transportation, taxes, levies etc.
727	Construction of 4 No. Type V Qtr (G+1) with RCC Framed Structure at Phek Battalion (Nagaland).
728	P/I metering arrangement in MS enclosure matching with thevetical /HorizotalTPDB to be fixed at the top of the DB i/c matching color as per following:
729	0-500v, analog voltmeter with VSS control fuse-1set;LED indicating lamp-3nos; MAKE: AE/L&T
730	Supplying , transportation & delivery at sight of 7M long MS steel tubular pole type 410 SP-3, with one coat of MS primer paint, and as per IS: 2713-1986 includingMS bracketat the top about 0.7m long projection single arm arch bracket with 40m dia MS nipple for holding light fittings, , base plate, cap, earthing stud etc. with supply and fixing of weather proof 16 SWG thick G.I. Loop- box atthe pole base weather proof type of 200 X 150X100 mm size having front with locking arrangement and with 4 pole terminal supported on insulators, 1 No. 15A kitkat fuse, earthing stud , duly connected, 2 Nos. 32mm bore polythene pipe embedded in concrete for cable entry & outgoing etc. as required.(The concrete foundation size : Under ground 400 x 400 x 1150 (depth) with above ground pedestral of 300 x 300 x 450,where loop boox to be accomodated. Erection of pole to be paid separetly.) Make : SUBHAM POLES or Equiv.
731	Providing & installing pole wiring with 3 x 1.5 sq.mm PVC copper wire including earthing the pole and connecting to Loop in and Loop out box to installed at the base of the pole with connection and installed the M.S. box in cement concrete foundation. The pole shall be painted with 2 coats of aluminium paint over single coat of MS primer paint as per direction of E/I.
732	Supply and installation of streetlight fittingincluding 45W LED, Smart Bright Essential and 40mm dia MS pipe of suitable length with clamping, wiring, connection as reqd. Philips cat no. BRP031 LED45 CW SLR GR PSU SPD OR EQIV.
733	Supply & installation of GI earth spike of about 20mm dia X 1800 mm long in ground near each street pole including supply & installation of 8 SWG GI wire from earth spike to earthing bolt of street pole through 3/4\" PVC pipe installed in Pole foundation, connection as required.
734	Supply of Alluminium conductor, PVC/XLPE insulated, armoured, overall PVC sheathed 1100 Volts Grade Power Cables Confirming to IS 1554 / 7098 ( Part - I ) 1988 with latest amendments of following sizes :
735	2C X 6 sq. mm
736	4 X 25 sq. mm (28mm)
737	Supply , transportation and delivery at site singleIndoor 20W LED Tube light Batten type Fitting complete. Model - Essential SmartBright Batten, Equivalent to Philips cat no. BN170C LED20S-6500 PSU L120. or Equivalent.
738	Supplying & Fixing surface ceiling/wall mounted 20W LED decorative round downlighter, Model -Sleek Surface Prosimilar to Philips Cat No - SM296C LED20S-6500 PSU WH or Equivalent.
739	Supplying & Fixing surface ceiling/wall mounted 20W LED decorative round downlighter, Model -Sleek Surface similar to Philips Cat No - SM251/261 LED20S 6500 PSU WH or Equivalent.
740	Supply & Fixing ofstreet light fitting including 25W LED, Smart Bright Essential, Philips BRP029 LED25 CW SLR GR PSU SPD OR EQIV..
741	Supply , transportation and delivery at site following size of Ceiling/ Exhaust/wall bracket/PadestalFan of following description as reqd.(Usha/Bajaj/Khaitan/EPC or eqv.
742	1200mm(48\") sweep AC Ceiling Fan, Model striker 1 STAR (safety wire) & S3/P2 capacitor complete with downrod/Blade/ canopy.
743	1400mm(56\") sweep AC Ceiling Fan, Model striker 1 STAR (safety wire) & S3/P2 capacitor complete with downrod/Blade/ canopy.
744	Metal exhaust light duty 230mm(9\") Aeroclean LD GBD AC exhaust fan.
745	Supply of Al Louver for 230 mm exhaust fan
746	Fixing only outdoor street light type fluorescent light fitting or MV light fitting complete with allaccessories to be fixed /projected from the wall of the building incl. making holes/providing clampingarrangement & necy. GI reducer as required. S&F 40 mm GI pipe (ISI-Medium) quality 1.5 mts.average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall incl. painting etc.
747	Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail ofexisting DBs and necessary connection
748	40 A 4P MCB
749	40 A TP MCB
750	S.I.T.C. of ISI markrd 9 lit. capacity water type portable fire extinguisher (IS:15683), with gun-metal cap & nozzle including initial fill & wall suspension bracket and complete in all respect with all labour, tools and plants, transportation, taxes, levis etc.
751	\"NOTE:-THE ABOVE RATE SHALL BE INCLUSIVE OF ALL TAXES & DUTIES, ROYALTIES, CESS, FEE, ENVIORMENTAL & POLLUTION, FITNESS & SAFETY CLEARANCE CHARGES (IF ANY), OR ANY OTHER INCIDENTAL CHARGES ETCINCLUDING GST.\"

Also Visit

Tenders

Nagaland Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Construction Of 01 No. Type Iv Quarters Rcc Framed Structure Complete At Phek Battalion (Nagaland) And Construction Of 04 Nos. Type V Quarters (G+I) Rcc Framed Structure Complete At Phek Battalion (Nagaland)., Phek-Nagaland

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Construction Of 01 No. Type Iv Quarters Rcc Framed Structure Complete At Phek Battalion (Nagaland) And Construction Of 04 Nos. Type V Quarters (G+I) Rcc Framed Structure Complete At Phek Battalion (Nagaland)., Phek-Nagaland

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us