|
| 1 | Renovation of Office building (Interior works) |
| 2 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 3 | Removing loose scales, blisters etc. from old painted surface and thoroughly smoothening the surface to make the same suitable for receiving fresh coat of paint |
| 4 | Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead With cement mortar 1:4 (1 cement : 4 fine sand) |
| 5 | Providing and applyingputty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete |
| 6 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work. |
| 7 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required |
| 8 | White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar taps |
| 9 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete:Semi rigid pipe |
| 10 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350mm with White P.V.C automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS:2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required: |
| 11 | Range of two half stall urinals with 5 liter P.V.Cautomatic flushing cistern. |
| 12 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge |
| 13 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: |
| 14 | W.C. pan with ISI marked white solid plastic seat and lid. |
| 15 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: |
| 16 | 1:3:6 or richer mix (i/c equivalent design mix) |
| 17 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:1½:3 |
| 18 | Water closet platformProviding and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required |
| 19 | White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 20 | Providing and fixing Ceramic White Ladies Urinal for Bathroom 17.71 x 13.97 x 3.94 Inch |
| 21 | Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conformingBIS-12818 and making good the same etc. complete as per direction of Engineer-in-charge |
| 22 | Providing and fixing of Exhaust Fan of approved brand and quality including all fittings and accessories complete |
| 23 | Dismantling of flushing cistern of all types(C.I/PVC/Vitreous china) including stacking of useful materials near the site and disposal of unserviceable materials within 50 meters lead |
| 24 | Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete:10 liter (full flush) capacity-white |
| 25 | Providing and fixing 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gm |
| 26 | Providing and fixing of water gyser ISI mark 50 ltr capacity incl. bolting with wall all accessories / fittings with electric fittings complete job |
| 27 | Angle Cock Valve (1 Pc) With Wall Flange Brass Body Chrome Finish Wall Mounted Angle Valve For Geyser |
| 28 | Providing and Fixing stainless floor drain trap/ jali with cockroach trap all accessories complete job |
| 29 | Supplying Installation, testing, commissioning and fitting of ceiling fan AC operated type 220/250 volt. Complete with 3 Nos of blades down rod canopy hanging shackle & regulator complete with 30mm length down rod supplied with the fan by the dealer |
| 30 | Supplying and fixing stepped type electronic fan regulator on the existing non modular plate switch box including connections but excluding modular plate etc. as required. |
| 31 | Supply and fitting of non modular PVC switch cover plate of size |
| 32 | 300mm x 300mm |
| 33 | 16 amp switch cover plate |
| 34 | Supplying and fixing following non modular switch/ socket on the existing nonmodular plate & switch box including connections but excludingplate etc. as required. |
| 35 | 5/6 amps switch |
| 36 | 15/16 amp switch |
| 37 | 6 pin 15/16 amp socket outlet |
| 38 | Providing & Installing 9WLed Ceiling Light Complete job. |
| 39 | Providing and fixingglazing in panelled or panelled and glazed shutters for doors, windows and clerestory windowsFloat glass panes |
| 40 | 5.0 mm thick glass pane (weighing not less than 12.50 kg/sqm) |
| 41 | Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. |
| 42 | P/f of frameless partition with door glazing consisting of 12mm clear toughened glass ( Saint gobain/ Modi make) and fixing with Dorma/Ozone make single leg spider, ceiling/bottom to glass connector, glass to glass connector, handle, doorset, floor spring, pivot etc, all the necessary fittings upto all height including scaffolding all complete as shown in attached drawing and a |
| 43 | P/f of frameless partition glazing consisting of 12mm clear toughened glass ( Saint gobain/ Modi make) and fixing with Dorma/Ozone make single leg spider, ceiling/bottom to glass connector, glass to glass connector, etc, all the necessary fittings upto all height including scaffolding all complete |
| 44 | Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rodof required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately) |
| 45 | Casement window double panels with S.S. friction hinges (300x 19x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window above 0.75 sqmupto1.50 sqm). |
| 46 | Renewing bottom rail and / or top runner of collapsible gate including making good all damages and applying priming coat of zinc chromate yellow primer of approved brand and manufacturer |
| 47 | Providing and fixing Hindware/Jaquar Bib Cock 2 in 1 and Health faucet with 1.2 mt steel flexible hose with wall hook |
| 48 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer)pipes conforming to IS: 15801 |
| 49 | PN-16 pipe, 16mm OD(SDR-7.4) |
| 50 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Zsections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size includingnecessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.)For fixed portion |
| 51 | Powder coated aluminum (minimum thickness of powdercoated 50 microns) |
| 52 | For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required |
| 53 | Powder coated aluminum (minimum thickness of powdercoated 50 microns) |
| 54 | Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin-charge. |
| 55 | With floating glass panes of 4.0 mm thickness (weight not less than 10.00 kg / sqm) |
| 56 | Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory window shutters |
| 57 | Providing and fixing Laminated Wooden flooring with AC4 grade (12 mm thk) as directed on existing surface of approved make, quality, shade, having high pressure laminate surface of 0.3 mm thick with surface guard care material of high density fibre board, flooring planks having click joint system (Tongue and groove joint) Joint sealing with wax as per manufactures specifications, properly finishing the exposed edges and T moulding provided at the junction at laminated flooringand vitrified tiles, including skirting, corner profile, door profile complete in all aspects, as directed by the Engineer/Architect. |
| 58 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levelsGranite of any colour or shade |
| 59 | (Area of slab over 0.5 sqm) 18 mm |
| 60 | Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. |
| 61 | Granite Work |
| 62 | Extra for providing opening of required size and shape for wash basin/ kitchen sink in kitchen platform, vanity counters and similar location in marble/granite / stone work including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete |
| 63 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink without drain board |
| 64 | 610x460mm bowl depth 200mm |
| 65 | Providing and fixing Sink mixer (wall mounted) with 165 mm (6.5\") long swivel spout, connecting legs and wall flanges of jaquar or cera made |
| 66 | Providing and fixing of water gyser ISI mark 15 ltr capacity incl. bolting with wall all accessories / fittings with electric fittings complete job |
| 67 | Providing and fixing aluminium handles 125 mm, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete |
| 68 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 150x10 mm |
| 69 | Providing water connection for new pantry which includes making connection from existingsupply line to pantryincluding. Cutting of cement concrete in wall/ floor if required and making it good . Including cost of PPR pipes and fittings all works complete job |
| 70 | Connecting Upvc drain pipe for kitchen waste to existig S.W pipeincluding Cutting of cement concrete in wall/ floor if required and making it good incl. allpipe and pipe fittings complete job |
| 71 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead |
| 72 | Of area of 3 sqm. and below |
| 73 | Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size withnecessary screws, excluding panelling which will be paid for separately, allcomplete as per direction of Engineer-in-charge.. |
| 74 | First class kail wood( 35 mm) |
| 75 | p/f of window shades of VISTA, MARVEL, NOVA, MAC, HUNTER,DOGULAS, AEROLUX, or approved make Plain/ribbed as instructed |
| 76 | Renovation of Office building (Exterior Works) |
| 77 | Earth work in excavation by mechanical means (hydraulic excavator)/ manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts,wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: |
| 78 | All kinds of soil |
| 79 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 80 | Providing and laying in position cement concrete of specified grade including curing butexcluding the cost of centring and shuttering. All work upto plinth level with: |
| 81 | 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 82 | Centering and shuttering including strutting, propping etc. and removal of form for: |
| 83 | Foundations, footings, bases of columns etc. for mass concrete. |
| 84 | Columns, pillars, piers, abutments, posts and struts |
| 85 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 86 | Welded |
| 87 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-incharge. |
| 88 | Made of G.I. wire of dia. 4 mm, PVC coated to achieve outer dia not less than 5 mm in required colour and shade |
| 89 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work |
| 90 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 91 | Repairs of main gate at entrance incl. straightening of bent MS Bars wherever required complete jobs |
| 92 | Taking out existing brick paver blocks from footpath/ centralverge, including removal of rubbish etc., disposal of unserviceablematerial to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 meter lead as perdirection of Engineer-in-Charge. |
| 93 | Providing and laying 60mm thick factory made cement concreteinterlocking paver block of M-30 grade made by block making machinewith strong vibratory compaction and of approved size and design/shapelaid in required colour and pattern over and including 50mm thickcompacted bed of fine sand, filling the joints with coarse sand etc. allcomplete as per direction of Engineer-in-charge. |
| 94 | Kota stone slab flooring 25 mm thick over 20mm (average) thick baselaid over and jointed with grey cement slurry mixed with pigment tomatch the shade of the slab, including rubbing, polishing and curingcomplete with base of cement mortar 1:4 (1 cement : 4 coarse sand) |
| 95 | Supply and fixing of UPVC trunking. The rate shall include cost of necessary fixing accessories as required. |
| 96 | P/F 9Watt Waterproof Outdoor LED Bulkhead IP65 Wall or Ceiling Light Gate Light Outdoor Lamp (White) |
| 97 | Supply & fixing metallic sign board made of 3 mm thick ACP sheet ,finished with approved metallic colour as back ground (colour approved by department) & fixed on M.S. structure. The all side fabricated with 20mmx 3mm square bar with required fixing arrangement as frame |
| 98 | Repairs of roof gutters which include fixing of necessary flat iron supports , bolts , nuts, replacement and providing of drain flexible pipe as per directions of site incharge complete job |
| 99 | CEMENT PLASTER (IN COARSE SAND) for dismantled building facing JKHPMC office |
| 100 | 12mm Cement plasterof mix incl of chipping of old finished surface |
| 101 | Renovation of MD office (Civil Works) |
| 102 | Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable materialwithin 50 meters lead as per direction of Engineer-in-charge: |
| 103 | In cement mortar |
| 104 | Making the opening for door/window/clerestory window in brick masonryincluding dismantling in floor or walls by cutting masonry and makinggood the damages to walls, flooring and jambs complete, to match existingsurface i/c disposal of mulba/ rubbish to the nearest municipal dumpingground. |
| 105 | Fixing chowkhat in existing opening in brick/RCC wall with dashfasteners/chemical fasteners of appropriate size (3 nos on each verticalmember of door chowkhats and 2 nos. on each vertical member of windowchowkhats), including cost of dash fasteners/chemical fasteners |
| 106 | Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size withnecessary screws, excluding panelling which will be paid for separately, allcomplete as per direction of Engineer-in-charge. |
| 107 | First class kail wood( 35 mm) |
| 108 | Taking out doors, windows and clerestory window shutters (steel or wood)including stacking within 50 meters lead : |
| 109 | Of area of 3 sqm. and below |
| 110 | Brick work in clay fly ash (non-modular) bricks of class designation 7.5 in superstructure above plinth level upto floor five level and curing complete in: |
| 111 | CEMENT PLASTER (IN FINE SAND)12mm Cement plaster of mix: |
| 112 | 1 : 4 ( 1 cement : 4 fine sand) |
| 113 | Providing and applying Plaster of Paris putty of 2mm thickness overplastered surface to prepare the surface even and smooth complete |
| 114 | Removing white or colour wash by scrapping and sand papering andpreparing the surface smooth including necessary repairs to scratches etc.Complete |
| 115 | Distempering with dry distemper of approved brand and manufacture (twoor more coats) and of required shade on new work, over and includingwater thinnable priming coat to give an even shade |
| 116 | Wall painting with plastic emulsion paint of approved brand andmanufacture to give an even shade, one or more coats on old work. |
| 117 | Wall painting with premium acrylic emulsion paint of interior grade,having VOC (Volatile Organic Compound) content less than 50 grams/liter of approved brand and manufacture, including applying additionalcoats wherever required to achieve even shade and colour two coats |
| 118 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thicknessto be specified by the manufacturers) of 1st quality conforming to IS:15622 of approved make, laidon 20 mm thick bed of cement mortar 1: 4 (1 cement : 4 coarse sand) including pointing the joints with whitecement and matching pigment etc., complete |
| 119 | In colour such as White, Ivory, Grey, Fume Red Brown |
| 120 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622(thickness to be specified by the manufacturer), of approved make, in all colours, shadesexcept burgundy, bottle green, black of any size as approved by Engineer- in-Charge, inskirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement :3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointingin white cement mixed with pigment of matching shade complete. |
| 121 | Providing and laying gypsum panel partitions 100mm thick with water proof gypsumpanels of size 666 x 500 x 100mm made of calcite phosphor gypsum fixed with tongueand groove jointed with bonded plaster as per manufacturers’ specifications in superstructure above plinth level up to V floor level. Gypsum blocks will have a minimumcompressive strength of 9.3kg per/cm2 |
| 122 | Providing And Fixing approved Laminate Panelling For Walls, Columns Etc. Made Out Of 2\" X 1\" C. P. T. W. Frame Work At Every 1\" 6\" -2\" 0\" C/C Bothways, Covered With 9 Mm Th. Marine Ply Finished With 1.00 Mm. Thick. Sued Finished Laminate Of Approved Shade / Make Etc. Complete As Per Architect\"s Instructions |
| 123 | Providing and fixing Laminated Wooden flooring with AC4 grade (12 mm thk) as directed on existing surface of approved make, quality, shade, having high pressure laminate surface of 0.3 mm thick with surface guard care material of high density fibre board, flooring planks having click joint system (Tongue and groove joint) Joint sealing with wax as per manufactures specifications, properly finishing the exposed edges and T moulding provided at the junction at laminated flooring and vitrified tiles, including skirting, corner profile, door profile complete in all aspects, as directed by the Engineer/Architect. |
| 124 | Providing and fixing factory made uPVC white colour casement/casement cumfixed glazed windows comprising of uPVC multi-chambered frame, sash andmullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process ofrequired length (shape & size according to uPVC profile), uPVC extrudedglazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304grade) friction hinges, zinc alloy (white powder coated) casement handles, G.Ifasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers,plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shallbe also fusion welded including drilling of holes for fixing hardware\"s anddrainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rodof required size and of approved quality, all complete as per approved drawing& direction of Engineer-in-Charge. (Single / double glass panes and siliconsealant shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 125 | Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm &sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension. (Area of window upto 0.75 sqm.) |
| 126 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors whereverrequired: |
| 127 | W.C. pan with ISI marked white solid plastic seat and lid |
| 128 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors whereverrequired: |
| 129 | White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. |
| 130 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete: |
| 131 | 32 mm dia Flexible pipe |
| 132 | Providing and Fixing stainless floor drain trap/ jali with cockroach trap all accessories complete job |
| 133 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing |
| 134 | Rectangular shape 453x357 mm |
| 135 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: |
| 136 | 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms |
| 137 | Providing and fixing of water gyser ISI mark 50 ltr capacity incl. bolting with wall all accessories / fittings with electric fittings complete job |
| 138 | Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. |
| 139 | (a) 15 mm nominal dia |
| 140 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. |
| 141 | PN-16 pipe, 16mm OD(SDR-7.4) |
| 142 | Providing and fixing Chromium plated Bib Cockincluding all fittings and accessories complete |
| 143 | Providing and fitting of UPVC pipes (B Type) and fittings conforming to IS-13592-1992 - |
| 144 | Single Socketed 110 mm 3 m length |
| 145 | Fittings (110 MM) - |
| 146 | Coupler |
| 147 | single equal Tee (with door) |
| 148 | Door Bend T.S 110 mm |
| 149 | single equal Tee (without door) |
| 150 | double equal door Tee |
| 151 | Plain Tee |
| 152 | Bend 45 Degree |
| 153 | Bend 90 Degree |
| 154 | Vent Cowl |
| 155 | 110 mm bend UPVC pipe clip |
| 156 | Providing and fixing shower head incl all fittings and accessories |
| 157 | Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets |
| 158 | 20 mm dia ( heavy type) |
| 159 | Providing and fixing of Exhaust Fan of approved brand and quality including all fittings and accessories complete |
| 160 | Wall mount fan metallic body incl. all accessories |
