|
| 1 | A. TILES REPAIRING WORK DSR 15.23 - Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. |
| 2 | DSR 15.23.1 -For thickness of tiles 10 mm a to 25mm. |
| 3 | DSR 15.23.2 - For thickness of tiles above 25 mm and up to 40 mm. |
| 4 | DSR 11.40 - Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry@ 3.3 kg/ sqm including pointing the joints with white cement and atching pigments etc., complete. |
| 5 | DSR 11.37A - Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 6 | DSR 15.2 - Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 7 | DSR 15.2.2 - Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) |
| 8 | DSR 4.1 - Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 9 | DSR 4.1.8 - 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 10 | DSR 11.26 - Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : |
| 11 | DSR 11.26.1 - 25 mm thickMatt/Antiskid finish of size |
| 12 | DSR 11.56 - Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. |
| 13 | DSR 11.56.1 - Polished Granite stone slab colour of Black, Cherry / Ruby Red or equivalent. |
| 14 | B. PAINTING WORKDSR 13.112 - Finishing walls with Premium Acrylic Smooth exterior paint withSilicone additives of required shade. |
| 15 | DSR 13.112.1 - Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface. |
| 16 | DSR 13.98 - Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: |
| 17 | DSR 13.98.1 - One or more coats on old work |
| 18 | DSR 13.91 - Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 19 | DSR 13.99 - Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade. |
| 20 | DSR 13.99.1 - One or more coats on old work. |
| 21 | DSR 14.1 - Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. |
| 22 | DSR 14.1.1 - With cement mortar 1:4 (1 cement : 4 fine sand) |
| 23 | Wall Crack Repairing |
| 24 | LMR - Repair all hairline cracks by cutting \"V\"shaped grooves.and filling with ASIAN SMART CARE CRACK SEAL as per manufature specification. |
| 25 | DSR 13.43 - Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : |
| 26 | DSR 13.43.1 - Water thinnable cement primer |
| 27 | DSR 13.8 - Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 28 | DSR 13.5 - Applying priming coat. |
| 29 | DSR 13.50.3 - With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works. |
| 30 | DSR 22.22A - Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in-Charge. |
| 31 | C. WALL REPAIRING WORK DSR 15.7 - Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal ofunserviceable material within 50 metres lead as per direction of Engineer-in-charge. |
| 32 | DSR 15.7.4 - In cement mortar |
| 33 | DSR 15.3 - Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. |
| 34 | DSR 14.1 - Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 metres lead : |
| 35 | DSR 14.1.2 - With cement mortar 1:4 (1cement: 4 coarse sand) |
| 36 | DSR 6.4 - Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in |
| 37 | DSR 6.4.1 - Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 38 | DSR 5.1 - Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : |
| 39 | DSR 5.1.2 - 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources) |
| 40 | D. ROOF REPAIR WORKLMR - Providing and laying Mangalore tiles (as per the approved pattern 20mm nominal thickness of approved size) on sloped roofs 10m above floor level with cement mortor 1:4(1cement:4 coarsed sand) mixed with integral water proofingcompound, laid over a bed of50mm thick cement mortor including necessary scafolding ,form work complete finishing |
| 41 | DSR 15.23 - Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. |
| 42 | DSR 15.23.2 - For thickness of tiles above 25 mm and up to 40 mm. |
| 43 | E. PLINTH PROTECTION DSR 4.1 - Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: |
| 44 | DSR 4.1.4 - 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 45 | DSR 5.9 - Centering and shuttering including strutting, propping etc. and removal of form for |
| 46 | DSR 5.9.5 - Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 47 | DSR 5.22 - Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level |
| 48 | DSR 5.22.6 - Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 49 | F. DOOR AND WINDOW REPAIRING WORK LMR - Providing and finishing bright finished brass tower bolts (barrel open) |
| 50 | 250mmx10mm |
| 51 | 150mmx10mm |
| 52 | LMR - Providing and fixing bright finished brass butt hinges with necessary screw etc. complete |
| 53 | 125x70x4mm |
| 54 | 100x70x4mm |
| 55 | LMR - Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per Is 1868) transpaarent or dyed to required colour or shade with necessary screws etc, complete |
| 56 | 125mm |
| 57 | 75mm |
| 58 | LMR - Providing and fixing Aluminium hanging floor door stopper ISImarked anodised (anodic coating not less than grade AC 10 as per IS 1868) transparent or dyed to required colour or shade with necessary screw etc. complete |
| 59 | Twin Rubber Stopper |
| 60 | LMR - Providing and fixing finished brass 100mm mortice latch and lock ISI marked with six levers and pair or anodiesed |
| 61 | LMR - Providing and fixing in position for wood work in frames of doors,windows, |
| 62 | Teak Wood |
| 63 | LMR - Providing and fixing Atomatic Hydraulic door closer |
| 64 | Repairing of existing aluminium windows by removing the windows, ventilators and changing of EPDM rubber/ neoprene gasket, changing of float glass where ever necessary, changing of rollers/wheels , cleaning of tracks, changings of C.P brass / Stainless steel screws, and refixing by filling the gap in between aluminium frame &adjacent RCC/Brick work by providing wheather silicon sealent of approved quality up to 5mm depth and 5mm width complete finishing |
| 65 | DSR 123 - Providing and fixing factory made door frame (single rebate) made out of single piece extruded solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 62 mm width & 32 mm thickness, frame will be mitred & Jointed with self driven self tapping screws of size 38 mm x 4 mm & PVC solvent cement, including fixing the frame to wall with suitable dia & length anchor fastener as permanufacturer\"s specification and direction of Engineer-in-charge. |
| 66 | DSR 124 -Providing and fixing factory made 30 mm thick door shutter made of solid PVC foam profile. The styles & rails shall be of size 75 mm x 30 mm having wall thickness 5 mm. The styles, top & bottom rails shall have one side wall thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power. The styles and rails shall be reinforced with M.S. tubes of size 33 mm x 17 mmx 1 mm, painted with primer , all four corners of reinforcement to be welded or sealed. Solid PVC extruded bidding (push fit type) will be set inside the styles and the rails with a cavity, to receive single piece extruded 5mm PVC sheet as panel. The styles and rails will be mitred cut and joint with the help of PVC solvent cement & self driven self tapping screws. Single piece extruded solid PVC lock rail of size 100 mm x 30 mm with wall thickness 5 mm & 15 mm integrally extruded in the middle of the lock rail & fixed with styles with the help of PVC solvent cement & self driven self tapping screws of size 100mm x 8 mm complete as per anufacturer\"s specifications and direction of Engineer-in-charge. |
| 67 | DSR 9.124.2 - Decorative finish (both side wood grained finish) |
| 68 | G. SANITARY WORKSDSR 17.7 - Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: |
| 69 | DSR 17.7.1 - White Vitreous China Wash basin size 630x450 mmwith a pair of 15 mm C.P. brass pillar taps. |
| 70 | DSR 17.22A - Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. |
| 71 | DSR 17.3 - Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required . |
| 72 | W.C. pan with ISI marked white solid plastic seat and lid |
| 73 | DSR 17.78 - Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. |
| 74 | DSR18.51 - Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. |
| 75 | DSR 18.51.1 - 15 mm nominal bore. |
| 76 | (DSR 18.49)Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 . |
| 77 | DSR 18.49.1 - 15 mm nominal bore |
| 78 | DSR 18.53 - Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931. |
| 79 | DSR 18.53.1 - 15mm nominal bore |
| 80 | DSR 17.73 - Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. |
| 81 | 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. |
| 82 | DSR 17.34 - Providing and fixing toilet paper holder : |
| 83 | DSR 17.34.1 - C.P. brass |
| 84 | DSR 17.71 - Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. |
| 85 | DSR 17.16A - Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. |
| 86 | DSR 17.24 - Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe. |
| 87 | DSR 19.4 - Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: DSR 19.4.3 - 180x150 mm size P type |
| 88 | DSR 19.4.3.1 - With common burnt clay F.P.S. (non modular) bricks of class designation 7.5. |
| 89 | DSR 19.2 - Supplying and fixing C.I. cover 300x300 mm without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5 kg. |
| 90 | DSR 17.22B - Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. |
| 91 | DSR 18.58 - Providing and fixing PTMT grating of approved quality and colour.DSR 18.5.8.2 - Rectangular type with openable circular lid. |
| 92 | DSR 18.58.2.1 - 150 mm nominal size square 100 mm diameterof the inner hinged round grating. |
| 93 | DSR 18.22 - Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet. |
| 94 | DSR 18.22.2 - 150 mm diameter |
| 95 | DSR 18.52 - Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. |
| 96 | LMR - Providing and fixing Floor trap standard design and of approved make conforming to IS:8931 |
| 97 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing |
| 98 | LMR -Rectangular shape 1500X 1000 mm |
| 99 | H. PLUMBING WORKSDSR 18.8 - Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. |
| 100 | 15 mm nominal dia Pipes |
| 101 | 20 mm nominal dia Pipes |
| 102 | 25 mm nominal dia Pipes |
| 103 | 32 mm nominal dia Pipe |
| 104 | LMR - Providing and fixing ofPVC Pressure Pipes and required fittingshaving ISI mark,confirming the IS 4985:2000, designed specifically for varied pressure and gravity flow application with High flow rate, high resistance to chemical and corrosion comprising water temperatute from 1⁰ C to 45⁰ C and non reactive to acids, alkalis and effolents, salt and minerals. |
| 105 | External work |
| 106 | 32 mm nominal dia Pipes metre 6KG/CM 2 |
| 107 | 75 mm nominal dia Pipes 6KG/CM 2 |
| 108 | 110mm nominal dia Pipes metre 6KG/CM 2 |
| 109 | 160 mm nominal dia Pipes 6KG/CM 2 |
| 110 | I. CANOPY WORKSLMR -Providing and fixing canopy for window using 12mm thick Glassfitted with M.S frame and Bolt & nuts |
| 111 | J. ELECTRICAL WORKSLMR -Providing and fixing of 12 W round LED falsce ceiling light |
| 112 | LMR -Providing and refixing of MCB 2 pole 6 Amps |
| 113 | LMR -Providing and refixing wall mounted fan |
| 114 | Providing and refixingLED mirror light |
| 115 | LMR -Providing and refixing of exhaust fan of 300 mm dia |
| 116 | LMR -Providing and refixing 2x36 W LED falsce ceiling fittings |
| 117 | LMR -Providing and refixing 2x2 feet LED falsce ceiling light |
| 118 | LMR -Providing and refixing 3 way modular box |
| 119 | Providing and refixing 6 way modular box |
| 120 | LMR -Providing and refixing 6 Amps modular switch |
| 121 | LMR -Providing and refixing 6 Amps modular 5 pin socket |
| 122 | LMR - Providing and refixingMCB single pole 6 Amps |
| 123 | LMR -Providing and refixingMCB single pole 20 Amps |
| 124 | LMR -Providing and refixing ELCB two pole 63 Amps(100mA) |
| 125 | LMR -Providing and refixing ELCB two pole 40 Amps(40mA) |
| 126 | LMR -Providing and refixing MCB four pole 63Amps |
| 127 | LMR - Providing and refixing 16 Amps modular 5 pin socket |
| 128 | LMR -Providing and refixing 16 Amps modular switch |
| 129 | LMR -Providing and refixing LED wall light fittings(11 W) |
| 130 | LMR -Providing and refixing LED wall light fittings out door water proofing 15 W |
| 131 | Providing and refixing 20 W LED bulb |
| 132 | LMR -Providing and layiing 4 core 120 Sqmm (AYFY) aluminium armoured under Ground cable to be laid in Cable trench |
