|
| 1 | Earthwork in excavation of foundation trenches and column foundation trenches and columnfoundation and pits in all kinds of soil within an initial lift of 1.5m. Including dressing the sides and leveling the bed and depositing the excavated materials away from the site within an initial lead of 50m including cost of all labour, sundries, tools and plants etc complete as per direction of the Engineer-in-charge as per approved specification.(Excavation of Foundation & Brick Wall Below Plinth Beam) |
| 2 | Filling foundation trenches and plinth with sand, well watered and compacted with appropriatemechanical compactor, top surface dressed and leveled to proper gradient including cost of allmaterials, labour, sundries, T&P ,all taxes, royalties, loading and unloading etc complete as per direction of the Engineer-in-charge as per approved specification (Below Foundation & Brick Wall Below Plinth Beam) |
| 3 | Providing and laying plain cement concrete 1:4:8 Nominal grade using portland slag cement infoundation and bottom layers of flooring and below pile cap etc. using 40mm size downgradedhard crusher broken granite aggregate of approved quality from approved quarry including weighbatching. Mixing in appropriate mechanical mixers, lowering, laying and compacting to properlevel including curing and cost of all materials with all taxes and royalties loading and unloadingconveyance, labour, sundries and T&P etc complete as per direction of the Engineer-in-charge as per approved specification.(Below Foundation Brick Wall Below Plinth Beam, PCC in floor Sub-base) |
| 4 | R.C.C. work of M-25 grade with 20mm and down grade black hard granite (crusher broken) stonechips including hoisting and laying( Below Footing & Pedestal) |
| 5 | R.C.C. work of M-25 grade with 20mm and down grade black hard granite (crusher broken)stone chips including hoisting and laying . (RCC Column) 10\"/12\" (Base to GL) 10\"/12\" (GL to PL) |
| 6 | R.C.C. work of M-25 grade with 20mm and down grade black hard granite (crusher broken) stonechips including hoisting and laying.(Plinth Beam) |
| 7 | Supplying reinforcement of required diameter and approved quality (Fe 500-D) for the RCC items with straightening, cutting to sizes, bending and binding , lifting and placing in position as per design complete including cost of binding wires including all labour, sundries, T&P and scafolding for all heights etc complete as per direction of the Engineer-in-charge as per approved specificationFoundation Reinforcement ( Footing, Column, Pedestal & Plinth) |
| 8 | Masonry work using fly ash Bricks of 25cm X 12cm X 8cm size having crushing strength not lessthan 75 kgs/ cm2 in cement mortar (1:6) with portland slag cement (PSC) immersing the bricks for minimum 6 hours in water before use with necessary projections, splays, cutting, circular moulding, corbelling etc. including cost, conveyance, taxes, royalties, loading and unloading of all materials and all labour for scaffolding, watering and curing, sundries, T&P etc complete as per direction of the Engineer-in-charge as per approved specification (Brick wall below PB 1st footing, Brick wall below PB 2nd footing & Brick wall below PB 3rd footing) |
| 9 | R.C.C. work of M-25 grade with 20mm and down grade black hard granite (crusher broken)stone chips including hoisting and laying.GF ColumnColumns 10\"/ 16\" |
| 10 | R.C.C. work of M-25 grade with 20mm and down grade black hard granite (crusher broken)stone chips including hoisting and laying.GF Roof Beam Rib (incl. slab thickness)Roof BeamRB (10\" x 16\") |
| 11 | R.C.C. work of M-25 grade with 20mm and down grade black hard granite (crusher broken)stone chips including hoisting and laying .GF Roof Slab ( Bed Room-1, 2 &3, Dining, Drwaing, Kitchen,Common Toilet, Attach Toilet , Entry , Balcony) |
| 12 | R.C.C. work of M-25 grade with 20mm and down grade black hard granite (crusher broken)stone chips including hoisting and laying. GF Chajja |
| 13 | R.C.C. work of M-25 grade with 20mm and down grade black hard granite (crusher broken)stone chips including hoisting and laying. GF Lintel over Ground floor 10\" and 5\" Wall |
| 14 | R.C.C. work of M-25 grade with 20mm and down grade black hard granite (crusher broken)stone chips including hoisting and laying. GF Staircase( Waist Slab, landing Slab,landing beam, RCC Steps, Tread 10\", Riser 6\" |
| 15 | Supplying reinforcement of required diameter and approved quality (Fe 500-D) forthe RCC items with straightening, cutting to sizes, bending and binding , lifting andplacing in position as per design complete including cost of binding wires includingall labour, sundries, T&P and scaffolding for all heights etc complete as perdirection of the Engineer-in-charge as per approved specification |
| 16 | Masonry work using Fly Ash Bricks of 25cm X 12cm X 8cm size having crushingstrength not less than 75 kgs/ cm2 in cement mortar (1:6) with portland slagcement (PSC) immersing the bricks for minimum 6 hours in water before use withnecessary projections, splays, cutting, circular moulding, corbelling etc. includingcost, conveyance, taxes, royalties, loading and unloading of all materials and alllabour for scaffolding, watering and curing, sundries, T&P etc complete as perdirection of the Engineer-in-charge as per approved specification. (GF 10\" wall & GF 5\" wall) |
| 17 | Providing 6mm thick cement plaster with cement mortar of mix (1:4) with portland slag cement (IS 455) over a coat of cement wash to ceiling of roof slabs, stair, landings, chajja, shelf and lofts etc. including roughening chiseling, scraping and cleaning and finishing smooth as per direction of the Engineer-in-charge including cost of all materials, conveyance, taxes and royalties, scaffolding, watering and curing, sundries and T&P etc complete as per direction of the Engineer-in-charge as per approved specification. GF Ceiling Plaster |
| 18 | Providing 12mm thick cement plaster with cement mortar (1:4) using portland slagcement (IS 455) to outside surface of brick masonry walls including raking out jointsto a depth of 12mm, scrapping and cleaning the surface and finishing the plasteredsurface smooth to proper plumbs and level as per direction of the Engineer-in- charge including cost of all materials, conveyance loading and unloading, all taxesand royalties, all labour for scaffolding, watering and curing, sundries and T&P etccomplete as per direction of the Engineer-in-charge as per approved specification. GF Internal Plaster |
| 19 | 16 mm thick cement plaster on the rough side of brick masonry wall with cementmortar of mix (1:6) using portland slag cement (IS 455) with including raking outjoints upto a depth of 12mm, scraping and cleaning the surface and finishing theplastered surface smooth to proper plumbs and level as per direction of theEngineer-in-charge including cost of all materials, conveyance, loading andunloading, all taxes and royalities, all labour for scaffolding, watering and curing, sundries and T&P etc complete as per direction of the Engineer-in-charge as perapproved specification. GF Internal Plaster |
| 20 | Fitting fixing of F.R.P panelled shutter with F.R.P door frame in doorsincluding cost of heavy duty stainless steel hinges, screws , aldrops, towerbolts, handles of approved quality, size and make etc complete as perdirection of the Engineer-in-charge as per approved specification.Toilet doors |
| 21 | Supplying and fixing Sal wood Chaukaths of different sizes for doorsincluding cost conveyance royality, taxes T&P materials and all labour etc.required for the work and coaltarring two coats to wood works (wall sidesurface of chaukaths) including cost of all labour and materials etccomplete as per direction of the Engineer-in-charge as per approvedspecification Doors Frame |
| 22 | R.C.C. work of M-25 grade with 20mm and down grade black hard granite (crusher broken)stone chips including hoisting and laying .i) FF ColumnColumns 10\"/ 16\" |
| 23 | R.C.C. work of M-25 grade with 20mm and down grade black hard granite (crusher broken)stone chips including hoisting and laying .ii) Roof BeamRB (10\" x 16\") |
| 24 | R.C.C. work of M-25 grade with 20mm and down grade black hard granite (crusher broken)stone chips including hoisting and laying .iii) FF Roof Slab( Bed Room-1, 2 &3, Dining, Drwaing, Kitchen,Common Toilet, Attach Toilet , Entry , Balcony) |
| 25 | R.C.C. work of M-25 grade with 20mm and down grade black hard granite (crusher broken)stone chips including hoisting and laying .iv) FF Chajja |
| 26 | R.C.C. work of M-25 grade with 20mm and down grade black hard granite (crusher broken)stone chips including hoisting and laying .V) Lintel (Lintel over Ground Floor) |
| 27 | R.C.C. work of M-25 grade with 20mm and down grade black hard granite (crusher broken)stone chips including hoisting and laying .V) Staircase |
| 28 | Supplying reinforcement of required diameter and approved quality (Fe 500-D) forthe RCC items with straightening, cutting to sizes, bending and binding , lifting and placing in position as per design complete including cost of binding wires including all labour, sundries, T&P and scaffolding for all heights etc complete as per direction of the Engineer-in-charge as per approved specification ( Steel) |
| 29 | Masonry work using Fly Ash Bricks of 25cm X 12cm X 8cm size having crushingstrength not less than 75 kgs/ cm2 in cement mortar (1:6) with portland slag cement(PSC) immersing the bricks for minimum 6 hours in water before use with necessary projections, splays, cutting, circular moulding, corbelling etc. including cost, conveyance, taxes, royalties, loading and unloading of all materials and alllabour for scaffolding, watering and curing, sundries, T&P etc complete as perdirection of the Engineer-in-charge as per approved specification. (FF 10\" wall FF 5\" wall) |
| 30 | Providing 6mm thick cement plaster with cement mortar of mix (1:4) with portlandslag cement (IS 455) over a coat of cement wash to ceiling of roof slabs, stair,landings, chajja, shelf and lofts etc. including roughening chiseling, scraping andcleaning and finishing smooth as per direction of the Engineer-in-charge includingcost of all materials, conveyance, taxes and royalties, scaffolding, watering andcuring, sundries and T&P etc complete as per direction of the Engineer-in-chargeas per approved specification. FF Ceiling Plaster |
| 31 | Providing 12mm thick cement plaster with cement mortar (1:4) using portland slagcement (IS 455) to outside surface of brick masonry walls including raking out jointsto a depth of 12mm, scrapping and cleaning the surface and finishing the plasteredsurface smooth to proper plumbs and level as per direction of the Engineer-in- charge including cost of all materials, conveyance loading and unloading, all taxes and royalties, all labour for scaffolding, watering and curing, sundries and T&P etc .complete as per direction of the Engineer-in-charge as per approved specification. FF Internal Plaster |
| 32 | 16 mm thick cement plaster on the rough side of brick masonry wall with cementmortar of mix (1:6) using portland slag cement (IS 455) with including raking outjoints upto a depth of 12mm, scraping and cleaning the surface and finishing theplastered surface smooth to proper plumbs and level as per direction of theEngineer-in-charge including cost of all materials, conveyance, loading andunloading, all taxes and royalities, all labour for scaffolding, watering and curing, sundries and T&P etc complete as per direction of the Engineer-in-charge as perapproved specification. FF Internal Plaster |
| 33 | Fitting fixing of F.R.P panelled shutter with F.R.P door frame in doors including cost of heavy duty stainless steel hinges, screws , aldrops, tower bolts, handles of approved quality, size and make etc complete as per direction of the Engineer-in-charge as per approved specification.Toilet doors |
| 34 | Supplying and fixing Sal wood Chaukaths of different sizes for doors including cost conveyance royality, taxes T&P materials and all labour etc. required for the work and coaltarring two coats to wood works (wall side surface of chaukaths) including cost of all labour and materials etc complete as per direction of the Engineer-in-charge as per approvedspecification Doors Frame |
| 35 | R.C.C. work of M-25 grade with 20mm and down grade black hard granite (crusher broken)stone chips including hoisting and laying .i) TF ColumnColumns 10\"/ 16\" |
| 36 | R.C.C. work of M-25 grade with 20mm and down grade black hard granite (crusher broken)stone chips including hoisting and laying .ii) TF Roof Beam Rib(excl. slab thickness) |
| 37 | R.C.C. work of M-25 grade with 20mm and down grade black hard granite (crusher broken)stone chips including hoisting and laying .iii) TF Roof Slab |
| 38 | Supplying reinforcement of required diameter and approved quality (Fe 500-D) forthe RCC items with straightening, cutting to sizes, bending and binding , lifting and placing in position as per design complete including cost of binding wires including all labour, sundries, T&P and scaffolding for all heights etc complete as per direction of the Engineer-in-charge as per approved specification |
| 39 | Masonry work using fly ash bricks of 25cm X 12cm X 8cm size having crushingstrength not less than 75 kgs/ cm2 in cement mortar (1:6) with portland slag cement(PSC) immersing the bricks for minimum 6 hours in water before use with necessary projections, splays, cutting, circular moulding, corbelling etc. including cost, conveyance, taxes, royalties, loading and unloading of all materials and alllabour for scaffolding, watering and curing, sundries, T&P etc complete as perdirection of the Engineer-in-charge as per approved specification.Head Room 10\" wall |
| 40 | Providing 6mm thick cement plaster with cement mortar of mix (1:4) with portlandslag cement (IS 455) over a coat of cement wash to ceiling of roof slabs, stair,landings, chajja, shelf and lofts etc. including roughening chiseling, scraping andcleaning and finishing smooth as per direction of the Engineer-in-charge includingcost of all materials, conveyance, taxes and royalties, scaffolding, watering andcuring, sundries and T&P etc complete as per direction of the Engineer-in-chargeas per approved specification. TF Ceiling Plaster |
| 41 | 16mm thick cement plaster on the rough side of brick masonry wall with cement mortar of mix (1:6) using portland slag cement (IS 455) with including raking out joints upto a depth of 12mm, scraping and cleaning the surface and finishing the plastered surface smooth to proper plumbs and level as per direction of the Engineer-in-charge including cost of all materials, conveyance, loading and unloading, all taxes and royalities, all labour for scaffolding, watering and curing, sundries and T&P etc complete as per direction of the Engineer-in-charge as per approved specification. TF Internal Plaster |
| 42 | Providing 12mm thick cement plaster with cement mortar (1:4) using portland slagcement (IS 455) to outside surface of brick masonry walls including raking out jointsto a depth of 12mm, scrapping and cleaning the surface and finishing the plasteredsurface smooth to proper plumbs and level as per direction of the Engineer-in- charge including cost of all materials, conveyance loading and unloading, all taxesand royalties, all labour for scaffolding, watering and curing, sundries and T&P etccomplete as per direction of the Engineer-in-charge as per approved specification. TF External Plaster |
| 43 | Fabricating and fixing MS Grill for fixing in windows with 10 mm squre barmesh including cost of all material, cost of welding rod with all labour, conveyance, fixing in position etc complete as per direction of the Engineerin-in charge as per approved specification.MS Door |
| 44 | 20 mm thick cement plaster ( 1:4 ) for grading plaster over roof slab with cost carriage royalty etc. ROOF |
