|
| 1 | Excavation for foundation in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 m. beyond the building area and stacking or spreading as directed,preparing the bed for the foundation and necessary back filling, ramming, watering, including shoring and strutting as necessary complete. |
| 2 | Excavation for foundation in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 m. beyond the building area and stacking or spreading as directed,preparing the bed for the foundation and necessary back filling, ramming, watering, including shoring and strutting as necessary complete.Lift above 1.5 to 3.00 m |
| 3 | Providing and filling sand in foundation trenches / below Raft as per drawing and technical specifications etc.complete. (Coarse Sand and Gravel )(SSR-2021-22/Item No.-15.07/Page No.-) |
| 4 | Providing soling using 80 mm size granite / quartzite / gneiss / trap metal in 15 cm. layer including hand packing filling voids with sand / grit, ramming, watering etc complete. |
| 5 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided |
| 6 | Providing andlayingCastinsitu/ReadyMixcementconcreteM-25oftrap/granite/quartzite/gneissmetalforR.C.C.workinfoundationslike raft,strip foundations,grillage and footings of R.C.C. columns and steel stanchions etc. |
| 7 | ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-25oftrap/granite /quartzite/gneissmetalforR.C.C.columnsasperdetaileddesignsanddrawingsoras directedincludingsteelcentering,formwork,coverb |
| 8 | Filling in plinth and floors with contractorsmaterial/brought from outside and approved by Engineer inchargein layers of 15 cmto 20 cm including watering and compaction etc. complete. |
| 9 | Providing andlayingCastinsitu/ReadyMixcementconcreteinM-25oftrap/granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, l |
| 10 | Providing fly ash brick masonry with conventional / I.S. type fly ash bricksin C.M. 1:6 in foundation and plinth includingbailing out water manually striking joints, racking out joints watering and scaffolding etc. complete. As director by engineer in |
| 11 | Providing and laying Cast in situ/Ready Mix cement concrete M-15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting, rou |
| 12 | Providing fly ash brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. CompleteAs director by engineer incharge and BDG- 2 and 5 |
| 13 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm diameter / 2 hoop iron strips 25 mm X 1.6 mm placedat every th |
| 14 | Providing and laying Cast in situ/Ready Mixcement concrete M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting androughening t |
| 15 | Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landingsas per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction f |
| 16 | Providing and fixing in position TMT- FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations,slabs, beams columns, canopies, staircase, newels, chajjas,lintels pardis, copings, fins, arches etc. as per detailed designs |
| 17 | Providing internal cement plaster 20mm thick in a single coat in cement mortar 1:5 to concrete, brick surfaces in all positions including scaffolding and curing. Providing groove at joint of B.B.Masonry and concrete members complete. |
| 18 | Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. |
| 19 | Providing and applying Texture plaster with finishing with texture material of approved make in 3 to 4 millimeter thickness on previously plastered surface, including Plaster Groove 6mm thickness or Tape Grooves 35 to 45 mm thickness or as required, in al |
| 20 | Providing and laying machine cut machine Polished Kota stone flooring 25mm to30mm thick and required width in plain/diamond pattern on bed of 1:6C.M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. compl |
| 21 | Providing and laying vitrified mirror / glossy finish tiles decorative typehaving size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required |
| 22 | Providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid |
| 23 | Providing and laying Antiskid Ceramic tiles of approved qualityof size 30 cm x 30 cm and confirming to IS 15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with c |
| 24 | Providing and laying ceramic tiles having size 30 cm. x 60 cm. confirming to corresponding I.S.for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with whi |
| 25 | Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade withfullmoulding and |
| 26 | Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete |
| 27 | Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing/moulding the sharp e |
| 28 | Providing and fixing Country cut teak wood double or single leaf second class fully panelled door shutter with 35mm thick style and rail with 25 mm thick panels with openable fan light as per detailed drawings. Excluding the door frame 60mm x 100mm stainl |
| 29 | Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iro |
| 30 | Providing and fixing Country cut teak wood windows with double leaf 25 mm thick planked shutterswithoutventilatorsasperdetaileddrawingsincludingstainlesssteelfixturesand fastenings and finishing the wood work with oil painting 3 coat |
| 31 | Providing and fixing in position Mild steel fixed staggered ( Z Type ) Ventilatoras per detailed drawing with hot deep zink coating including fabricating with Mild steel\"Z \"Section of size 20mm x 25 mm and 3 mm thick at weight 1.42 Kilogram/One Running |
| 32 | Providing and fixing mild steel grill work for windows, ventilators, etc. 20 Kg / Sqm. as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete. |
| 33 | Providing and fixing collapsible steel gate in one / two leaves with hot rolled verticalchannels of 18 x 9 x 3 mm minimum size, crossings of M.S. flats of size 18 x 5 mm T orE section for runner of minimum 40 x 6 mm size for flange, M.S. flat for top ru |
| 34 | Providing and fixing 50mm diameter and 1.5 mm thick vertical and top Stainless steelhand railing in S.S.304 Grade with Stainless steel square / circular pipe bracing of size 32mm x32mm x1.5 mm in 3 rows including fabricating ,fixtures, errecting, necess |
| 35 | Providing and applying two coats ofexterior acraylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface, applying primer coat ,scaffo |
| 36 | Providing and applyingimpression 24 carrat Luxury paint of approvedmake & approved brand Emulsion paint to interior walls and ceilings of approved quality, colour and shade to new surface in two coats, including sub surface prparation by Acrylic putty |
| 37 | Providing and fixing 8 cm C.I. Nahani Trap including C.I. grating bend and piece of C.I.pipe upto the outside face of the wall complete |
| 38 | Providing and fixing 15cm x 10cm salt glazed stoneware gully trap in cement concrete1:4:8 outside the building including cast iron grating in the sink, connecting glazedstoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for t |
| 39 | Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channelshalf round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed incement concrete |
| 40 | Providing and constructing Brick Masonry Inspection Chamber 90cm x 45cm x90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channelshalf round G.S.W.pipes, Brick Masonry, plastering from inside and with frame fixed incement concrete |
| 41 | Providing, laying and fixing P.V.C. pipe of 75mm dia. with fittings such as bends,tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete.Including removing existing pipe line if necessary and conveying and stacking the |
| 42 | Providing, laying and fixing P.V.C. pipe of 110 mm. dia. with fittings such as bends,tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete.Including removing existing pipe line if necessary and conveying and stacking |
| 43 | Providing and fixing white glazed earthenware Wash Hand Basin of 63cm x 45cmsize including Bib cock stop tap brass heavy 15mm, brackets, rubber plugs and brasschain, stop tap and necessary pipe connection including P.V.C. waste pipe and trap up tothe o |
| 44 | Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessaryfittings, remaking good the demolished portion etc. complete. Including removing existingpipe line if necessary and conveying and stacking the same in PWD chowky or as dire |
| 45 | Providing and fixing on walls/ceiling/floor 20 mm dia. CPVC pipe with necessaryfittings, remaking good the demolished portion etc. complete. Including removing existingpipe line if necessary and conveying and stacking the same in PWD chowky or as direct |
| 46 | Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe with necessaryfittings, remaking good the demolished portion etc. complete. Including removing existingpipe line if necessary and conveying and stacking the same in PWD chowky or as dire |
| 47 | Providing and fixing 20 mm dia. screw down bib/ stop tap of brass including necessarysocket union nut complete. |
| 48 | Providing, laying and fixing P.V.C. pipe of 15mm dia. with fittings such as bends,tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete.Including removing existing pipe line if necessary and conveying and stacking the |
| 49 | Providing, laying and fixing P.V.C. pipe of 20mm dia. with fittings such as bends,tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete.Including removing existing pipe line if necessary and conveying and stacking the |
| 50 | Providing, laying and fixing P.V.C. pipe of 25mm dia. with fittings such as bends,tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete.Including removing existing pipe line if necessary and conveying and stacking the |
| 51 | Providing and fixing H.D.P container one piece moulded water tank made out of highdensity polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet,outlet overflow pipe inclusive of all tank |
| 52 | Providing and fixing 450mm x 550mm size superior type Belgium mirror with 16mmdia. nickel plated towel rod etc. complete. |
| 53 | Providing and fixing Orissa type white glazed earthenware 575 mm water closetpan including S trap with earthenware foot rests, cast iron soil and vent pipe upto outsideface of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its |
| 54 | Providing and fixing European type white glazed earthenware coupled closet symphonictrap with symphonic low level white glazed 10 litres cistern with black backliteseat with all necessary pipe connection etc. complete |
| 55 | Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) treatmentby treating the backfill in immediate contact with foundation at the rate of 5 litres ofemulsion concentrate of 1.0 percent of clorophyrifos per One Square Metre of ve |
| 56 | Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating thetop surface of plinth filling at the rate of 5 litres of emulsion concentrate at 1.0percent of clorophyrifos per One Square Metre of surface area covering ten ye |
| 57 | Providing and applying water proofing treatment using acrylic polymer modifiedcement based water proofing coating with fibre glass mesh mixing at the rate ofpowder to liquid (2:1) by weight covering 9 to 10 Square Metre /Kilogram withtwo coat using app |
| 58 | Providing and Fixing Vertical Blinds of approved Make and shade of 100mm regularfabric with powder coated aluminium channel with telting PVC chain & bottom weightplate with all necessary fixtures and fitting etc. complete. (Sample to be final by Enginee |
| 59 | Providing and Fixing of Mineral Fibre Suspended Ceiling System with Bioguard(Bevelled Tegular) EDGE TILES WITH 15mm Exposed GRID. The tiles shouldhave Humidity Resistance (RH) of 99%, Light Reflectance 90%, Thermal Conductivityk = 0.052 - 0.057 w/m K, |
| 60 | Providing and fixing in position U.P.V.C.(Unplasticized Poly Vinyl Chloride) havingmulti- chambered outer frame section (73 x 50)mm with an outer wall thickness of2mm & steel reinforcement, multi-chambered slider frame (73x 60) mm with steelreinforceme |
| 61 | Providing and fixing 4mm thick High Pressure interior compact Laminate made out ofthermosetting resign treated Kraft as core material and design paper as a finish surface.Compact laminates should have the characteristic of flame retardant fulfilled the |
| 62 | Full Height Partitions in Glass finish - Providing and Fixing 80mm to 85mm thick Fullheight Double Skin partition up to 3 mtr height with All visible sections in Anodized /Powdercoated finish. Made up of Frames and Tiles. Frame construction In combinato |
| 63 | Providing and fixing in position, Double shuttered aluminium extruded powdercoated openable door of specified size with aluminium door frame of powder coatedsection 101.60 x 44.75mm , 3.18 mm thick and shutter comprising of powder coatedsection having |
| 64 | CUSTOM PRINTED ACOUSTICAL FALSE CEILING :Providing & Fixing of Customcolor Printed Mineral Fibre Acoustical Suspended Ceiling System with 19mm thickMicrolook 90 Edge Tiles with 15mm face exposed grid. The tiles shall have smooth bright laminated visual |
| 65 | Providing and fixing 90 cm x 60 cm Granite plate engraving 10 cm. Height letter,figures including painting the lefters/figures with approved colour and shade complete |
| 66 | ProvidingandfixingheavydutyinterlockingconcreteRubbermouldglossypavingblocksof80mm thickness of having a strength of 400 Kilogram/Sq.cm. of approved quality and shape on a bedof crushed sand of 25 to 30 mm thick including s |
| 67 | Full Height Steel Storage @ 750Lx450Dx2100HTProviding and fixing Openable Steel Storage of 750 x 450 x 2100Ht, with 4 adjustableshelves, Complete body & shutter made in 0.8 mm thick & Top in 2 mm thick CRCA, 4Shutter to be mounted with the help of cup |
| 68 | Executive\"sTable @ 1800Lx900Dx750HTProviding&Fixing ofTable @1800Lx900Dx750HT-TOP&GABLEENDto bemade of Membrane finish with soft water fall edges & curved panel & Decorated Anodizedsection MODESTYPANEL to be made of 18 mm th |
| 69 | 12 Seater Reading Table for Library @ 3600Lx1200Dx750HTProviding andFixing 12 Seater Reading Table forLiberary @3600Lx1200Dx750HTTop:made from 25 mm Prelaminated Particle board.All edges are covered by 2 mm. Thk. PVC edge bands glued by hot me |
| 70 | Free Standing Table @ 1200Lx600Dx750HTProviding and fixing Table of Size 1200 x 600 x 750 mm. Top: made from 25 mm Prelaminated Particle board.All edges are covered by 2 mm. Thk. PVC edge bands glued by hot melt glue applied by auto edge banding machi |
| 71 | Book Case with Glass Shutter @ 825Lx300Dx1650HTProviding & Fixing of Book Case with Glass Shutter @ 825Lx300Dx1650HT:- To be made out of complete body & in 0.7mm thick CRCA & Shutter in 1.2mm thick CRCA with glass pannel in Powder coating finish as per dr |
| 72 | Providing&ArrangemntofMidBack,ECOCTSMechanism,FixedArmrest,GasliftforSeatheight adjustment, Standard 5-prong P/Nylon Base with Fabric Upholstery |
| 73 | Providing & Arrangemnt of High Back Chair - TILT MECHANISM WITH MULTILOCKING, HIGH DENSITY CUSHION ON SEAT COMPOSITE LEATHER WITH METALLIC SILVER FINISH BASE AND ARMS WITH P.U.CASTORS GASLIFT FOR HEIGHT ADJUSTMENT. |
| 74 | For BoreWellTransportation charges of drilling machine, pipes and all accesorries of tube well etc.complete. |
| 75 | Drilling of bore well 150 mm dia. including drilling in all strata, removing drilled stuff out side the bore well complete. |
| 76 | Providing with thread Plain Iron casing pipes of 150 mm dia and 4.80mm thick Pipes of M.S.E.R.W. medium class (I.S.1239)for 150 mm dia. Tube-well, including loweringinto bore well without any damage & welding etc. complete. |
| 77 | Providing Perforated Iron casing pipes of 150 mm dia and of 4.80mm thickness of M.S.E.R.W. medium class (I.S.1239), including loweringinto tube well without any damage etc. complete. |
| 78 | Providing and fixing steel cap (I.S. 1239) for threaded Iron casing pipes including all acessesories complete. |
| 79 | Providiing gravel packing around the tube well & as directed by the engineer-Incharge etc. complete. |
| 80 | Improving (Development) process of tube well etc. complete. |
| 81 | Providing and fixing bell plug including all acessesories etc. complete. |
| 82 | Providing Wooden blocks of Mango trees of size 1.00m in length x 0.15m. width x 0.20m. thick. etc. complete. |
| 83 | Providing and fixing steel clamps 1.00m in length x 0.10m. width x 0.01m. thick. etc. Complete. |
| 84 | Providing Flushing (Air Lift method) after completion of Tubwell and capacity test by 90 degree \"V\" notch for half an hour as per G.S.D.A. Norms etc. Complete. |
