Tender For Fall Ceiling And Aluminium Frame Partition Work In Banda Vikas Pradhikaran New Office. - Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Zsections , Banda-Uttar Pradesh
TDR : 46811452
Tender Notice
BOQ
Expired
Banda
Uttar Pradesh
Tender For Fall Ceiling And Aluminium Frame Partition Work In Banda Vikas Pradhikaran New Office. - Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Zsections
Name of Work: Banda Vikas Pradhikaran naveen office me Fall seeling awam aluminium fream partition ka karya.
Sl. No.
Item Description
1
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Zsections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessaryfilling up the gaps at junctions, i.e. at top, bottom and sides with required EPDMrubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free,straight, mitred and jointed mechanically wherever required including cleatangle, Aluminium snap beading for glazing / paneling, C.P. brass / stainlesssteel screws, all complete as per architectural drawings and the directions ofEngineer-in-charge. (SI No. DSR 21.1)
2
Providingand fixing tiled falseceilingof specifiedmaterialsof size 595x595 mm in truehorizontal level, suspendedon inter lockingmetal grid of hot dipped galvanized steel sections ( galvanized @120grams/sqm, bothsideinclusive) consistingof main \"T\" runnerwith suitably spaced joints to get required length and of size 24x38mmmade from0.30mm thick (minimum) sheet, spacedat1200mmcentertocenterandcross \"T\" of size24x25 mm made of 0.30mm thick(minimum)sheet, 1200mm longs pacedbetweenmain\"T\"at600mmcenter to center to form a grid of 1200x600 mm and secondary cross \"T\" oflength 600mmandsize 24x25mmmade of 0.30mmthick (minimum) sheet tobe interlockedatmiddleof the1200x600 mmpanel to formgrids of600x600 mmandwall angleof size 24x24x0.3 mmandlayingfalseceilingtilesofapprovedtexture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc.Main \"T\" runners tobe suspended fromceiling usingGI slottedcleatsof size27x37x25x1.6mmfixed to ceilingwith12.5mmdiaand50mmlongdashfasteners,4mm GIadjustablerodswithgalvanisedbutterflylevelclipsofsize85 x30x0.8mmspacedat 1200mmcentertocenteralongmain T,bottomexposedwidthof24mmofallT-sectionsshallbeprepaintedwithpolyesterpaint,all complete forallheightsasper specifications,drawingsandasdirectedbyEngineer-in-charge. GIMetalCeiling Lay inplainTegularedge Globalwhitecolor tilesof size595x595mm,and0.5mm thickwith8mmdrop; made of GI sheet havinggalvanizingof 100gms/sqm(both sidesinclusive)andelectrostaticallypolyesterpowdercoatedof thickness60microns(minimum), includingfactorypaintedafter bending. (PWD SOR 21 Itam No 10)
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
