Tender For Due To Change Of Office Space In Gomtinagar Phase 2 Mantri Awas Situated In Aawas No D-114 Type 4, Repair Of Shatigrast Bathrooms, Repair Of Shatigrast Window Doors, Repair Of Shatigrast Wardrobe, Installation Of Steel Curtain Rod And Other Nec, lucknow-Uttar Pradesh

Tender For Due to change of office space in Gomtinagar phase 2 Mantri Awas situated in Aawas no D-114 type 4, repair of Shatigrast bathrooms, repair of Shatigrast window doors, repair of Shatigrast wardrobe, installation of steel curtain rod and other necessary repair work. - Dismantling tiles work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25mm. DAR 15.23.1 2 Providing and laying rectified Glazed ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS: 15622 of approved make in colours White, lovry GreyFume Red Brown laid on 20 mm thick cement mortar 1:4 (1 cement :4 Coarse sand) jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigments etc complete. 11.39 3 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer) of approved make in all colours shades except burgundy bottle green black of any size as approved byE/I in skirting risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed pigment of matching shade complete. 8.31 4 Providing and fixing C.P. brass long nose bib cock of approved quality confirming to IS standard and weighting npt less than 810 gms.15 mm nominal bore.18.50.1. 5 P/F C.P. brass Angle Valvefor basin mixture and geyser points ofapproved quality confirming to IS:8931.15 mm nominal bore.18.53.1. 6 Providing and fixing on Wall Face Unplasticised Rigid PVC rain water Pipes conforming to IS:13592 Type A, including Jointing with Seal ring conforming to IS:5382, Leaving 10mm Gap for thermal expansion, all fittings like two nos bend, one mo Coupler or any other accessories and P/F PVC pipe clips fixed by means of 50X50X50mm hard wood plug, Secrewed with MS Screws of required lenght in wall face including cutting brick work and fixing in cement mortar 1:4 (i) Single Socketed pipes 110mm dia meter. 7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge.Concealed work, including cutting chases and making good the wall etc 15 mm nominal outer dia pipes, (SDR-11) 8 P/F white vitreous china pedestal type (European type /wash down type) water closet pan.17.15. 9 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet 100 mm diameter.18.22.1. 10 Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity-white.17.18.1. 11 P/F Wash Basin with C.I.brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern white vitrous china wash basin size 630x450 mm with a pair of 15 mm cp brass piller taps.17.7.1. 12 Structual Steel work riveted bolted or welded in built up section, trusses, Builds up gates,framed work lncluding cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Sl.N0-10.2, 13 Providing and fixing ISI marked 35 mm thick flush door ShuttersConforming to IS : 2202 (Part I)non decorative type core of block board construction with frame lst class hard wood and well matched commercial 3 ply Veneening with vertical graints or cross brand and face veneers on both faces of shutters. DAR N0-9.21.1, (Rs-1445) 14 Providing and fixing of 35, mm thick UP Teak Wood Jali Door and Window Shutter withheavy quality S.S. Jali with necessary beading, including supply and fixing of wooden cleats and stopper and including fixing and adjustment of hinges, bolts, locks handles, spring & or otherfitting but excluding their supply etc. Painting two Coats of Black Japan on All Frame fitting in necessary etc. Complete work as Per Direction of E/I. 15 Renewing glass panes, with putty and nails wherever necessary including racking out the old putty Float glass panes of norminal thickness 5 mm (weight not less than 12.5kg/sqm)(DAR 14.5.2) 16 Providing and fixing S.S. pipe curtain rods with S.S brackets and other fittings 20 mm dia (heavy type). 17 Supply and fixing of box type wardrobe with 19mm thick plyboard and shutter will be provided 25mm thick prelaminated board including supply of cost of all materials, labour T&P etc required for proper compleion of work. (Based on as per actual requirment)

INR 770 /-

INR 2.29 Lakhs /-