}

Tender For Civil Work At Madarsa Behrul Uloom Al Farooq Thatti Lohawat Jodhpur Construction Of 4 Acr, Boys And Girls Toilet - Civil Work At Madarsa Behrululoomal Farooq Thatti Lohawat Jodhpur Under Mukhyamantri Madarsa Yojana Work Sl. No. Item Descripti, lohawat-Rajasthan

RAJASTHAN COUNCIL OF SCHOOL EDUCATION has published Tender For Civil Work At Madarsa Behrul Uloom Al Farooq Thatti Lohawat Jodhpur Construction Of 4 Acr, Boys And Girls Toilet - Civil Work At Madarsa Behrululoomal Farooq Thatti Lohawat Jodhpur Under Mukhyamantri Madarsa Yojana Work Sl. No. Item Descripti. Submission Date for this Tender is 26-12-2024. Building Work Tenders in lohawat Rajasthan. Bidders can get complete Tender details and download the document.




Tender Notice

46774125
Tender For Civil Work At Madarsa Behrul Uloom Al Farooq Thatti Lohawat Jodhpur Construction Of 4 Acr, Boys And Girls Toilet - Civil Work At Madarsa Behrululoomal Farooq Thatti Lohawat Jodhpur Under Mukhyamantri Madarsa Yojana Work Sl. No. Item Descripti
Open Tender
Indian
Rajasthan
Lohawat
26-12-2024

Tender Details

Tender For Civil Work At Madarsa Behrul Uloom Al Farooq Thatti Lohawat Jodhpur Construction Of 4 Acr, Boys And Girls Toilet - Civil Work at MADARSA BEHRULULOOMAL FAROOQ THATTI LOHAWAT JODHPUR UNDER MUKHYAMANTRI MADARSA YOJANA WORK Sl. No. Item Description 1 Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter.All kinds of soils 2 P.C.C. IN FOUNDATION Providing and laying in position cement concrete including curing compaction etc. of specified grade excluding the cost of centering and shuttering =All up to plinth leve 1:4:8 IS 456-2000(1Cement :4 Course Sand :8 Graded stone aggregate 40 mm nominal size 3 Stone Masonry For Foundation Random Rubble stone masonry for foundation and plinth in cement sand mortar above 30cm thick wall in: cement mortar 1:6 (1cement : 6sand) 4 Providing and laying in position specified grade of reinforced cement concrete including curing compaction finishing with rendering in cement sand mortar 1:3 (1-Cement:3-coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement.All work up to plinth levelIS 456-2000: 1:1.5:3 (1-Cement:1.5 coarse sand:3-graded stone aggregate 20 mm nominal size) 5 Stone Masonry For Super Structure Random Rubble stone masonry for superstructure above plinth level one storey height above 30cm thick walls in : cement mortar 1:6 (1cement : 6sand)Extra over item No. 6.1 & 6.2 for : wall upto 30cm and less thickness. 6 Centering and shuttering with plywood or steel sheets including strutting, propping, bracing both ways and removal of formwork for foundations in basements rafts, footings, strap beams, bases of columns , etc. up to plinth level. 7 Centering and shuttering with plywood or steel sheets including strutting, propping, bracing both ways with wooden members andremoval of formwork for superstructure up to 4.5 mtr aboveplinth,for: Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands , coping, bed plates, anchor blocks, sills, chhajjas lintel, beam etc. 8 Lintel Beams:-Reinforced cement concrete work in beams, suspended floors, roofs, girders having slopes up to 150 , landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases, up to floor three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1-Cement:3-coarse sand) and making good and joints excluding the cost of centering, shuttering and reinforcement:1:1.5:3 (1-Cement:1.5 coarse sand:3-graded stone aggregate 20 mm nominal size). 9 Slab & Beam:-Reinforced cement concrete work in beams, suspended floors, roofs, girders having slopes up to 150 , landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases, up to floor three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1-Cement:3-coarse sand) and making good and joints excluding the cost of centering, shuttering and reinforcement:1:1.5:3 (1-Cement:1.5 coarse sand:3-graded stone aggregate 20 mm nominal size). 10 Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor three level. Tremo Mechanically treated bars 11 Piller masonaory Random Rubble stone masonry for superstructure above plinth level one storey height above 30 cm thick walls in : Cement mortar 1:4 (1cement : 4sand) Extra over item No. 6.1 & 6.2 for: Pillar masonry including bed plates as per specifications. Bed plates to be paid separately. 12 Angle Structural steel work in single section fixed without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete above plinth level upto 4.5 mtr height in RS joist flats, tees, angles and channels. 13 P&F square bars or other flat welded to window/ventilators etc., Guard bar 10 x10mm 14 Door&Windows, P&F MS sheet single leaf door shutter in angle iron frame 35x35x5cm suitability diagonally braced with 25x3mm flat iron above and belove lock rail of size 50x5mm beading extra including all fittings, as per direction of Engg incharge but excluding cost of chokhats: including two coats of anti-corrastie red oxide primer paint : MS Sheet 20 SWG,add extra for double leaf shutters. 15 Ventilator: P&F angle iron frame25x25x3 mm for ventilators with fixed wire gauge 16 mesh 24 gauge including 100 mm square bars at interval of 100 mm welded screwed to frame with metal beading 20x3 mm complete in all respect as per disign. 16 Stone Kharanja: Dry stone kharanja for foundatoin and plinth. 17 PCC:Providing and laying in position cement concrete including curing compaction etc. complete in spcified grade excluding the cost of centering and shuttering all work upto plinth level1:3:6(1 cement:3 Coarse sand :6 graded stone aggregate 20 mm nominal size).M 10 grade nominal mix 18 Polished Blue Kota Stone flooring skirting, laid over 20 mm thick base of C.M. 1:4 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete :(A) 25 mm thick slab.for area 2001 to 5000 sq cm 19 Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finished : 25 mm thick 20 Black Board : Plaster on new surface on wall in cement sand mortar 1:3 including raking of joints etc. complete fine finish: 12mm thick 21 Pointing on stone masonry in cement sand mortar 1:3 Flush or ruled pointing 22 Painting with ready mix paint of approved brand & manufacture in all shades to give an even shade : New steel work (two or more coasts) 23 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding: New work (two or more coats) over and including scrapping and priming coat with cement primer 24 Exterior finishing :- Finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. New work (two or more coat applied @1.67/ ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm.) 25 Copping: Cement concrete flooring grade 1:2:4 rounding off edges etc. but excluding the cost of nosing of steps etc. complete : 50mm thick with 20mm thick nominal size aggregate. 26 Grading roof water proofing treatment with : Cement mortar 1:4 (1 Cement : 4 coarse sand) 27 Gola:- Providing batta (gola) 75mm x 75mm in cement concrete (1:2:4) including finished with cement mortar 1:3 as per standard design. 28 For rain water- P&F rigid PVC Pipe (IS:4985 mark) class II(4 Kg. /Cm.) approved quality /makeincluding joining the pipe with solvent cement rubber ring and lubricant 110mm dia 29 P&L 20 to 25 mm size glazed tiles pieces for roof treatment having clour and shade as approved by the Engineer incharge over 25 mm thick layer of cement mortar mix 1:4 with application of cement slury including fininshing of joints with ordinary cement and curing etc. complete in all respect. Washing with acid. 30 Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance. 31 Half brick masonry in superstructure up to third story.using bricks of designation 75 with nominal hoop rainforsed (2 Nos. 6mm MS bar) at every fourth course in for hoop rainforcement 1Sqm. 6mm MS bar, Cement mortar 1:4 (1-Cement:4-coarse sand). 32 celling plasterin cement sand mortar 1:3complete fine finish: 6mm thick 33 First sort extra for facing as per design and detailed specification including additional cost of stones over item No. 6.1&6.2 for : Course rubble facing Second sort 34 Wiring of light point/fan point/exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 KV grade and 1.5 sq. mm nominal size FR PVCinsulated unsheathed flexible copper earth conductor 1.1 KV grade (IS: 694) of approved make group-2 Light point Short point (up to 3 mtr.) 35 Medium point (up to 6 mtr) 36 Long point (up to 10 mtr) 37 Fan pointMedium point (up to 6 mtr) 38 Long point (up to 10 mtr) 39 Wiring of 3 pin 5 amp. light plug point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 KV grade and 1.5 sq. mm nominal size FR PVCinsulated unsheathed flexible copper earth conductor 1.1 KV grade (IS: 694) of approved make in surface/reces group - On board 40 S & F follwing sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface/ recessed using clamps, fastener as required including cutting the wall , covering conduit with wire mess and making good the same as required. Group-225 mm dia 41 Supplying and drawi;ng FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existing surface ofr necessed conduit/ casting capping including making connections etc. as required. Group-2 1 x 1.5 sq. mm 42 2 x 1.5 sq. mm 43 2 x 2.5 sq. mm 44 P & F 240/415 V MCB of breaking capacity not less than 10 KA (B/C/D tripping characteristic) ISI marked IS 8828 (1996)/conforming to IEC 60898 in existing board/ sheets including making connections with lugs, testing etc. as required. Group-2 6 A to 32 A rating 45 P & F Recessed/ Surface mounting heavy duty horizontal type sheet steel Distribution board phophatised/ powder painted complete with 100 Amp copper copper bus bar, shorting link, neutral, earth link and din bar, conforming to IS 13032 & IS 8623 including making internal DB termination with copper lux, testing etc. as reqd. . group-2Single door(Single Phase) 8 way 46 P & F strip fluorscent tube fitting fabricated from (CRCA sheet and finished with powder coating/stove enamelled non corrosive UV resist EP channel)complete with accessories(Low loss copperchoke, starter, starter seat)/Electronic choke with terminal block duely prewired with copper conducter including making connection, testing etc. as required(Without tube)1x36 watts with OCCB. Group-2 47 P & F Fluorscent tube rod in existing fixtures as required, minimum 3 star rating,36/40 watts 48 P/I aying PVC insulated & PVC sheathed cable of 1.1 kV grade with aluminium conductor of IS:1554 P-I of Groups of approved make in ground as per IS:1255 including excavation of 30cm x 75cm size trench, 25cm thick under layer of sand, Iind class bricks covering, refilling earth, compaction of earth, making necessary connection, testing etc. as required of size 6 sqmm, 4 core arm 49 P & F star rated double ball beari;ng capacitor start, aluminium bodyand blade ceiling fan with down rod upto 30 cm with 3x1.5 sqmm pvc insulated flexible copper conductor making connection testing etc as required.1200 mm sweep 3 star rated 50 P & F IS:371 marked 6 amp suffacetype celling roseinculuding making commection testing etc. grup-2 (E071400) 51 P & F ISI marked 6 amp bakelite batten/ angle holder including making connextion testing etc as required 52 P & F 18 swg MS Recessed fan box, hexagonal/round of size 130mm dia, depth 75 mm , 12mm dia rad fan hookwith 100mm length extended on eeach side. gourp-1 53 P & F 18 SWG Sheet steel boxes duly finisded with two coats of red oxide and with earthing terminal of following sizes (nominal size) on surfacae or in recessed as required. 175 mmX 100 mmX60 mm 54 P & F paper phenolic resin bonded laminates confirming to IS: 2036- 1995 for boxes/frames including making holes for switches etc with brass screws washers/zink plated nut and bolts as required with 3mm thick 55 Maintenance free Gel EarthingwithPipe in pipe / Pipein striptechnologyfilled with anti corrosive conductive compound ( CPRI Tested )below the ground in 150 - 200 mm dia. earth pit & surrounding filled with required mineralfillingcompound ( MFC should have hygroscopic property to retain the moisture for long time to create low resistance zone) and C.C.finished chamber covered with hinged type with locking arrangement C.I. Cover,C.I. Frame of size 300mm x 300mm complete testing of earth resistance as required. of following sizes.With Pipe in Pipe Technology (Inner pipe dia. / Outer pipe dia. ) 80 - 100 micron GI Coating GI pipe 2000 mm long, 50 / 25mm, Terminal 12 mm GI Strip 56 Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter.All kinds of soils 57 P.C.C. IN FOUNDATION Providing and laying in position cement concrete including curing compaction etc. of specified grade excluding the cost of centering and shuttering =All up to plinth leve 1:4:8 IS 456-2000(1Cement :4 Course Sand :8 Graded stone aggregate 40 mm nominal size 58 Random Rubble stone masonary for foundation and plinth in Cement Sand Mortar above 30 Cm. thick wall IS 597 (pPart-I) in : Cement Mortar 1:6 (1-Cement:6-Sand). 59 STONE MASONRY IN SUPER STRUCTURE-Random Rubble stone masonary for superstructure above plinth level one storey height above 30 Cm. thick walls in : Cement Mortar 1:6 (1-Cement:6-Sand). - Wall up to 30 Cm. and less thickness. 60 Stone Kharanja: Random rubble dry stone Kharanja under floor. 61 Brick work in partition in super structure up to third storey 7 Cm. thick (brick on edges) using bricks of class designation 75 with nominal hoop rainforcement (2 Nos 6mm MS bar) at every fourth course in : Cement mortar 1:6 (1-Cement:6-coarse sand). 62 Door Frames:-Structural steel work in single section fixed without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete above plinth level up to 4.5 mtr. height in R.S. joist flats, tees, angles and channels. 63 Doors:- Providing & fixing ms sheet single leaf door shutters in angle iron frame 35x35x5 mm suitablly diagonally braced with 25x3mm flat ironabove and below lock rail of size 50x5 mm beading extra includingall fittings, as per direction of engg. incharge but excluding coes of chokhats including two coats of anti corrastie red oxide primer panit. MS sheet 22 SWG 64 Providing and fixing steel gate grating and grills made of angles, tees, square bars or other flats black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide. 65 Providing and fixing Ist quality standard White Ivory Glazed Tiles ISI marked [IS:13753] of size 300mm x 200mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster). Category-I : Kajariya, Jhonson, Orient, Somani make etc. 66 Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finished: 20 mm thick. 67 Stone slab roofing on ground for with fine grained stone slab from approved quarry with 150 mm top lime terracing with Hemp, Methi, Lime, Sandla with Gur & Gugal (as per JODHPUR PRACTICE) including ralthal, filling of joints of parapet and slab on both sides in cement sand mortar 1:4 lime batta (gola) 75mmx75mm Sandla and ceiling plaster in CM 1:4 with wire and nails etc. complete as per specification for span. Above 2.50 mtr upto 3.30 metre.Deductfor Ralthal not to be done. Deduct for cement flush pointing is done instead of cement plaster 1:4. Deduct Providing and laying 150 mm lime terrace on roofs of ground floor including lime batta (gola) 75mm and sandal complete (JODHPUR PRACTICE) for thickness:Deduction Providing gola (bata) in lime concrete using 50% lime surkhi/sand mortar 1:2 with grit along joint of walls and terrece finished with lime mortar 1:2 plaster with Gur, Gugal, Methi etc in concave shape of size:75mmx75mm 68 Grading roof water proofing treatment with : Cement mortar 1:4 (1 Cement : 4 coarse sand) 69 Polished Blue Kota Stone flooring skirting, laid over 20 mm thick base of C.M. 1:4 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete :(A) 25 mm thick slab. 70 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding: New work (two or more coats) over and including scrapping and priming coat with cement primer. 71 Painting with enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. 72 Supply and fixing Jodhpur sand stone Machine cut Dash, Coping,sill,lintel fixed in cement sand mortar 1:4(B) 9 cm (3.5) thick 73 PE-AL-PE Composite pressure pipes and fittings. Providing and fixing polyethylene Aluminium Polyethylene (PE-AL-PE) Composite Pressure Pipes U.V. stablised with carbon black conforming to ASTMF – 1282 – 1995 for water supply including clamps at one metre spacing cutting and making good the walls etc. Exposed on Walls (Internal work). 2025 (25 mm OD) pipe 74 PE-AL-PE Composite pressure pipes and fittings. Providing and fixing polyethylene Aluminium Polyethylene (PE-AL-PE) Composite Pressure Pipes U.V. stablised with carbon black conforming to ASTMF – 1282 – 1995 for water supply including clamps at one metre spacing cutting and making good the walls etc. (Internal work). Exposed on Walls 1216 (16 mm OD) pipe 75 P & F Indian type white glazed vitreous china Ist quality W.C. orissa pan (IS:2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor : Size 580x440 mm. 76 P & F WVC wash basin (1st quality, I.S. : 2556 Mark) of approved make with C.I. brackets duly painted, 1 No. 15 mm C.P. Pillar cock (IS : 8934 Mark) & 32 mm C.P. brass waste coupling of approved make,25 mm G.I. waste pipe complete including cutting & making good the wall.: 530 mm x 450 MM 77 P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make: Brass bib Cock (400 gm) 15 mm bore 78 P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc.C.P. Inlet connection 15mm.Brass (IS : 8931 marked) 79 P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /makeincluding joining the pipe with solvent cement rubber ring and lubricant. 110 mm dia 80 P&F waste coupling with fitting of approved quality/ make : C.P. brass 40mm dia 81 P&F waste coupling with fitting of approved quality/ make : PVC with C.P. Nut 40mm 82 P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant:Plain T110 mm 83 P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: Bend 87.5 84 P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: Pipe Clip 110 mm dia 85 P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant Plain floor trap 110 mm dia 86 P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant Vent Coewl 110 mm dia 87 P/F W.V.C.( IS:2556) Squatting Urinal of standard make complete including cutting & making good the floor. Size 450x350 mm 88 Construction of soakage Trench inall types of soil of with 300 mm thick dry stone masonry, 80 mm thickstone slab covering, jointing of slab in CM 1:3 Ralthal, Kharanja, 40 mm thick M-15grade C.C. flooring earthwork etc. complete as per approved drawing including disposalof earth within a lead of 50 Mtr.: Top width 180 Cm., bottom width 90Cm. & depth 240 Cm 89 Construction of soakage well in all type of soil 300 mm thick dry masonry top and bottom 300 mm course in CM 1:6, 80 mm thick stone slab, jointing of slab in CM 1:3, Ralthal, Kharanja, 40 mm thick M-15 grade C.C. flooring, earth work complete as per approved drawing including disposal of earth within a lead of 50 mtr. : Size 240 Cm. dia outside & 240 Cm. depth. 90 P & F Ball Cock (IS : 1703 Mark) with Rod & P.V.C. Ball complete.Brass wt. 400 gm, 15 mm 91 P & F 15 mm dia connection pipe of approved quality make PVC Pipes with nuts 450 mm. 92 P & F Full way value (IS : 778 Mark) or wheel valve of approved make. Gun metal 15 mm nominal bore. 93 P & F Stop cock (IS:8931 Mark) superior quality & of approved make : Brass 400 gm. 15 mm nominal bore. 94 P & F G.I. Pipes (External work) with G.I. fittings (IS:1239 Mark) including trenching & refilling earth etc. 15 mm dia nominal bore. 95 Provinding and fixing PVC storage tank confirming to IS : (12701 marked indicating the BIS license No) of approved make with cover, 25 mm dia 1 M long G.I. over-flow pipe & 25 cm. long wash out pipe with plug & socket, including making connection etc.complete of approved design.500 litres capacity. 96 Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter.All kinds of soils 97 P.C.C. IN FOUNDATION Providing and laying in position cement concrete including curing compaction etc. of specified grade excluding the cost of centering and shuttering =All up to plinth leve 1:4:8 IS 456-2000(1Cement :4 Course Sand :8 Graded stone aggregate 40 mm nominal size 98 Random Rubble stone masonary for foundation and plinth in Cement Sand Mortar above 30 Cm. thick wall IS 597 (pPart-I) in : Cement Mortar 1:6 (1-Cement:6-Sand). 99 STONE MASONRY IN SUPER STRUCTURE-Random Rubble stone masonary for superstructure above plinth level one storey height above 30 Cm. thick walls in : Cement Mortar 1:6 (1-Cement:6-Sand). - Wall up to 30 Cm. and less thickness. 100 Stone Kharanja: Random rubble dry stone Kharanja under floor. 101 Brick work in partition in super structure up to third storey 7 Cm. thick (brick on edges) using bricks of class designation 75 with nominal hoop rainforcement (2 Nos 6mm MS bar) at every fourth course in : Cement mortar 1:6 (1-Cement:6-coarse sand). 102 Door Frames:-Structural steel work in single section fixed without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete above plinth level up to 4.5 mtr. height in R.S. joist flats, tees, angles and channels. 103 Doors:- Providing & fixing ms sheet single leaf door shutters in angle iron frame 35x35x5 mm suitablly diagonally braced with 25x3mm flat ironabove and below lock rail of size 50x5 mm beading extra includingall fittings, as per direction of engg. incharge but excluding coes of chokhats including two coats of anti corrastie red oxide primer panit. MS sheet 22 SWG 104 Providing and fixing steel gate grating and grills made of angles, tees, square bars or other flats black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide. 105 Providing and fixing Ist quality standard White Ivory Glazed Tiles ISI marked [IS:13753] of size 300mm x 200mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster). Category-I : Kajariya, Jhonson, Orient, Somani make etc. 106 Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finished: 20 mm thick. 107 Stone slab roofing on ground for with fine grained stone slab from approved quarry with 150 mm top lime terracing with Hemp, Methi, Lime, Sandla with Gur & Gugal (as per JODHPUR PRACTICE) including ralthal, filling of joints of parapet and slab on both sides in cement sand mortar 1:4 lime batta (gola) 75mmx75mm Sandla and ceiling plaster in CM 1:4 with wire and nails etc. complete as per specification for span. Above 2.50 mtr upto 3.30 metre.Deductfor Ralthal not to be done. Deduct for cement flush pointing is done instead of cement plaster 1:4. Deduct Providing and laying 150 mm lime terrace on roofs of ground floor including lime batta (gola) 75mm and sandal complete (JODHPUR PRACTICE) for thickness:Deduction Providing gola (bata) in lime concrete using 50% lime surkhi/sand mortar 1:2 with grit along joint of walls and terrece finished with lime mortar 1:2 plaster with Gur, Gugal, Methi etc in concave shape of size:75mmx75mm 108 Grading roof water proofing treatment with : Cement mortar 1:4 (1 Cement : 4 coarse sand) 109 Polished Blue Kota Stone flooring skirting, laid over 20 mm thick base of C.M. 1:4 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete :(A) 25 mm thick slab. 110 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding: New work (two or more coats) over and including scrapping and priming coat with cement primer. 111 Painting with enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. 112 Supply and fixing Jodhpur sand stone Machine cut Dash, Coping,sill,lintel fixed in cement sand mortar 1:4(B) 9 cm (3.5) thick 113 Provinding and fixing Polyproylene random copolymer pipe made from PPR Type 3 Raw Material certifiled by bodycote with UV stabilized external layer in similar colour & approved by wr As for it & potablity & including clamp, cutting and making good the walls & floors. (internal work) 25 mm OD 114 Provinding and fixing Polyproylene random copolymer pipe made from PPR Type 3 Raw Material certifiled by bodycote with UV stabilized external layer in similar colour & approved by wr As for it & potablity & including clamp, cutting and making good the walls & floors. (internal work) 16 mm OD 115 Provinding and fixing Squatting W.C. Pan (IS: 2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor (excluding the pair of foot rest. Size 580 x 440 mm 116 P & F WVC wash basin (1st quality, I.S. : 2556 Mark) of approved make with C.I. brackets duly painted, 1 No. 15 mm C.P. Pillar cock (IS : 8934 Mark) & 32 mm C.P. brass waste coupling of approved make,25 mm G.I. waste pipe complete including cutting & making good the wall.: 450 mm x 300 MM 117 P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make: Brass bib Cock (400 gm) 15 mm bore 118 P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc.C.P. Inlet connection 15mm.Brass (IS : 8931 marked) 119 P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /makeincluding joining the pipe with solvent cement rubber ring and lubricant. 110 mm dia 120 P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant:Plain T110 mm 121 P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: Pipe Clip 110 mm dia 122 P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant Plain floor trap 110 mm dia 123 P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant P-Trap 110 mm dia 124 P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant Vent Coewl 110 mm dia 125 P/F W.V.C.( IS:2556) Squatting Urinal of standard make complete including cutting & making good the floor. Size 450x350 mm 126 Supplying & Fixing R.C.C. Manholes covers with frame of approved make (Light duty).Size 450 X 450mm 127 P/F Grating of Approved quality Stainiese Steet sheet size 125 mm dia 128 Construction of soakage well in all type of soil with 300 mm thick dry masonry, top and bottom 300 mm course in CM 1:6, 80mm thick stone slab, jointing of slab in CM 1 : 3, Ralthal, Kharanja, 40 mm thick M-15 grade C.C flooring , earthwork complete as per approved drawing including disposal of earth within a lead of 50 mtr.: Size 240 Cm. dia outside & 240 Cm. depth. 129 Construction of Chamber in all types of soil with 300 mm thick masnory in CM. 1 : 6, 100 mm thick C.C. 1 : 5 : 10 in foundation , 20 mm thick inside plaster in Cm 1 : 6, finished with floating neat cement 50 mm thick M-15 grade C.C. flooring earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 Mtr.Inside size 450 x 450 mm depth upto 0.5 M & 15 Kg CI cover with frame. 130 P & F Ball Cock (IS : 1703 Mark) with Rod & P.V.C. Ball complete.Brass wt. 400 gm, 15 mm 131 P & F 15 mm dia connection pipe of approved quality make PVC Pipes with nuts 450 mm. 132 P & F Full way value (IS : 778 Mark) or wheel valve of approved make. Gun metal 15 mm nominal bore. 133 Provinding and fixing PVC storage tank confirming to IS : (12701 marked indicating the BIS license No) of approved make with cover, 25 mm dia 1 M long G.I. over-flow pipe & 25 cm. long wash out pipe with plug & socket, including making connection etc.complete of approved design.500 litres capacity. 134 P & F Low level Flushing Cistern of 10 litres capacity (IS : 2556mark). Of approved make with complete fittings C.I. brackets duly painted, brass ball cock with ball, (IS: 1703 mark) complete including cutting and making good the wall: WVC with C.P. brass bend.

Key Value

Document Fees
INR 1000 /-
EMD
INR 50460.0 /-
Tender Value
INR 25.23 Lakhs /-
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail