Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 08-01-2025 | Corrigendum No 02 | Date | 18-01-2025 |
| 2 | 08-01-2025 | Corrigendum No 02 | BOQ | 18-01-2025 |
| 3 | 30-12-2024 | Corrigendum No 01 (Dates) | Date | 15-01-2025 |
| Sl. No. | Item Description |
| 1 | Schedule \"A\" Part-I (B/R Work) |
| 2 | Taking down cement plaster/cast in situ terrazo of any description on brick walls or concrete surfaces etc. including racking out joints, hacking for key, scrubbing down with water, complete all as specified and directed. |
| 3 | M&L for rendering 15mm thick on other than fair faces of brick or concrete surfaces in cement mortar 1:6, finished even and smooth without using extra cement, complete all as specified and as directed. |
| 4 | M&L for Rendering 15mm thick in cement and sand mortar 1:4 onfair faces of brick work or cement concrete surfaces including finishing the surface even and smooth usingintegral water proofing compound, complete all as specified and directed. (WPC shall be measured and paid separately) complete all as specified and directed |
| 5 | M&L for 10mm thick rendering in CM 1:3, on brick or concrete surface of ceiling finished fair & even in, complete all as specified and directed. |
| 6 | Supply only water proofing compound of approved make, complete all as specified and directed. |
| 7 | Preparation of new plastered surfaces on ceiling and applying two coats of white wash, complete all as specified and directed. |
| 8 | Preperation of new plastered surfaces of walls andapplying two coats of oil bound distemper over a coat of alkali resistant primer, complete all as specified and directed. |
| 9 | Complete removal of existing treatment from wall surfaces and appliying two coats of oil bound distemper of approved colour over one coat of primer and applying 1mm thick JK Birla wall care putty and making the surface even and smooth and filling the uneven and small holes and making the edges of plaster properly by plaster of paris preparatory to distempering including preparation of surface by washing rubbing down and stopping of distempered surfaces, complete all as specified and directed. |
| 10 | Complete removal of existing treatment on plastered surfaces of walls including washing, rubbing down and stopping of old treatement including thin layer of wall care puttyand applying two coats of anti fungal exterior emulsion paint over a coat of cement primer, complete all as specified and directed. |
| 11 | Preparation of new plastered or concrete surfaces of walland applying two coats of cement base paint over a coat of primer, complete all as specified and directed. |
| 12 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) n exc. 1.5 sqmeach and credited to the contractor, complete all as specified and directed.Note: The damaged portion of the tiles/rendering shall be made good with the same material to match with the adjacent surface. |
| 13 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sqm but n exc 4 Sqm each and credited to the contractor, complete all as specified and directed.Note: The damaged portion of the tiles/rendering shall be made good with the same material to match with the adjacent surface. |
| 14 | S&F pressed steel frame for doors with one rebates size of frame 125x60 mm including necessary fixing lungs hinges lock strike plate etc including PCC, 1:3:6, type C-0 (using 12.5 mm graded crushed stone aggregate) as in back filling of pressed steel frame, complete all as specified and directed. |
| 15 | S&F pressed steel frame for doors with one rebates size of frame 105x60 mm including necessary fixing lungs hinges lock strike plate etc including PCC, 1:3:6, type C-0 (using 12.5 mm graded crushed stone aggregate) as in back filling of pressed steel frame, complete all as specified and directed. |
| 16 | Cutting chases pining in brick, concrete walls built in cement mortar or cement lime mortar making good to facings where required and pointing in cement mortor 1:3to ends or edges of shelves lintels etc and cutting chases for concealed water tubing cuttingexc 10 cm but not exc 20 cm girth, complete all as specified and directed. |
| 17 | S&F 35mm thick second class hardwood, Factory made,plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and directed. |
| 18 | S&F 35mm thick second class hardwood, Factory made, Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) supplied and fitted to chowkats, complete all as specified and directed. |
| 19 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying and fixing in opening, complete all as specified and directed. |
| 20 | S&F Factory made Solid Panel PVC Door Shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing, complete all as specified and directed. |
| 21 | S&F suspended false celling system using E Grid suspended celling Grid system of M/S Everest industries Ltd or India Gypsum. The size of Grid shall be 600X600mm with GI frame work, main runner 39X24mm, cross tee 29X24mm and wall angle 22.2X22.2mm using 4mm thick High Pressure Stream cured non primered classic/designer variant E-Board ISI Marked IS No 14862-2000. Fibre cement E Board to be placed in the gird of E Grid suspended ceiling grid system duly suspended by 4mm dia GI bar hangers from the pulins of the roof with butter fly clips including dismantling the existing ceiling board of any description fixed in any position with nails, complete all as specified and directed. |
| 22 | Dismantling wrought iron or mild steel work of any description not otherwise provided provided such as in purlins, truss , railing etc., complete all as specified and directed. |
| 23 | M&L for mild steel framed work such as grills, gratings, gates etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, nosing, framework of water tanks, band, straps, wind ties and similar work conforming to Fe-410-w (grade E-250) quality A, complete all as specified and directed. |
| 24 | M&L for structural steel work as in truss, rafter purling, made out of angle / Hollow pipe / tube section including jointing cleats, plates flat iron, gusset plates, rails, braces etc. confirming to IS-1161-1979 and Fe 410-W (gde-E-250) Quality-A, grade St-240, complete all as specified and directed. |
| 25 | S&F box type steel windows and ventilator double frame including grill (Factory made) outer frame made out ERW tube \"P\" section 65X45X25mm and shutter of ERW tube \"P\" section 50mmX35mm X20mm openable (double shutter) with glazed shutter on extrernal side and gauzed shutter on internal side including steel pintel hinges steel handle 100 mm long mild steel tower bolt 02 Nos on each shutter stopper of \"Z\" section and its locking arrangement and mild steel hook and eyes, complete all as specified and directed. Note:- The quoted rate a shall also deemed to be included of following. (i). One coat of zinc chromate primer on all exposed surface and one coat of tar on the ends of steel surface in contact with bricks / concrte surface.(ii) 4 Nos MS steel lugs made of 20X5 mm Iron flat 200 mm long. (iii) PCC block for embedding lugs (Note- sheet glass, wire mess grill will be measured and paid separately and window will be measured one side only) |
| 26 | S&F 100mm long butt hinges, medium weight, cold rolled mild steel, and fixed, complete all as specified and directed. |
| 27 | S&F 100mm long aluminium handles, cast type, anodised, complete all as specified and directed. |
| 28 | S&F 100mm long aluminium anodised, barrel tower bolts of extruded section and fixed, complete all as specified and directed. |
| 29 | S&F 150mm long aluminium handles, cast type, anodised, complete all as specified and directed. |
| 30 | S&F 200mm long aluminium anodised, barrel tower bolts of extruded section and fixed, complete all as specified and directed. |
| 31 | S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts, complete all as specified and directed. |
| 32 | S&F in repairs 300mm long mild steel ordinary rat tail rod pattern springs including roller & roller plate, complete all as specified and directed. |
| 33 | S&F 3.00mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc 0.5 sqm in each pane, complete all as specified and directed. |
| 34 | S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperature 1.18 mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and directed. |
| 35 | Preparation of new wooden surfaces exceeding 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed. |
| 36 | Preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed. |
| 37 | Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed. |
| 38 | M&L for25mm thick cement concrete, 1:2:4,type B-0 (using 12.5 mm graded crushed stone aggregate) as in sub base of floor finish even and rough to receive further floor finishes (tile/kota stone/ marble ), complete all as specified and directed. |
| 39 | M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in CM 1:6, complete all as specified and directed. |
| 40 | M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in CM 1:6, complete all as specified and directed. |
| 41 | M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to matcht, as in Skirting over and including 10 mm thick backing coat in CM 1:4, complete all as specified and directed. |
| 42 | M&L for Glazed ceramic tile 300 x 600 x 06-7mm thick (coloured) on vertical surfaces such aswall, dados etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 10 mm thick screed bed in CM 1:4, complete all as specified and directed. |
| 43 | M&L for 10mm thick vitrified parking tiles heavy duty exterior grade texured finished of size 400X400 mm over and including 15 mm thick screed bedin CM 1:4, complete all as specified and directed. |
| 44 | Dismantling of Stone slabs and tiles of any description or thickness in floors aprons etc laid in cement mortar of any thicknes, complete all as specified and directed. |
| 45 | M&L for 20mm thick granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed in CM 1:4, complete all as specified and directed. |
| 46 | M&L for 20-25mm thick machine cut kota stone slab as in riser of steps, skirting, dado and pillar jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing & polishing over and including 10mm thick backing coat in CM 1:4, complete all as specified and directed. |
| 47 | S&F 500 litres capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling water tanks and removing from site including 20 mm Ball brass valves, high pressure, with polythene float and flynut, complete all as specified and as directed. |
| 48 | S&F in repairs 15mm dia bore pipe gun metal, globe or gate valves for with iron wheel head, screwed both ends for iron pipe, complete all as specified and directed. |
| 49 | S&F in repairs 20mm dia bore pipe gun metal, globe or gate valves for with iron wheel head, screwed both ends for iron pipe, complete all as specified and directed. |
| 50 | S&F in repairs sink without drainage board made of stainless steel 1mm thick kitchen or laboratory with plug washers and waste pipe includingfixing contilever bracketand connecting union to pipe over all size 495 mm x420 mm, bowl size 410mm x 330 mm x 160 mm, complete all as specified and directed. |
| 51 | Taking down 15mm bore GI tubing of any description including cleaning for refixing or removal to store, complete all as specified and directed. |
| 52 | Taking down 20mm bore GI tubing of any description including cleaning for refixing or removal to store, complete all as specified and directed. |
| 53 | S&F 15mm bore galvanized steel water tubing, medium grade, with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.), complete all as specified and directed |
| 54 | S&F 20mm bore galvanized steel water tubing, medium grade, with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.), complete all as specified and directed |
| 55 | Refixing 15mm bore old GI pipe& connections in new or old position to walls and ceiling or laid in floor, complete all as specified and directed. |
| 56 | Refixing 20mm bore old GI pipe& connections in new or old position to walls and ceiling or laid in floor, complete all as specified and directed. |
| 57 | M&L for Lagging to pipes 20mm bore used in external water supply or plumbing all around with 50mm thick bonded mineral wool pre-formed ‘SNAP ON’ pipe sections of density 144 Kg /Cum conforming to IS 9842 provided with chicken mesh wire netting 25gauge 20mm mesh including applying with brushing neat cement slurry with 3 kg of cement per Sqm complete, complete all as specified and directed. |
| 58 | S&F in repairs for 10 litre capacity PVC valveless, syphonic action type, twin / dual type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and connection to pipes, complete all as specified and directed. |
| 59 | S&F in repairs Vitreous china squatting pan, orrisa pattern, of size 580x440mm, white with integral foot rest with P or S trap including provision of cement concrete bedding (excluding flushing cistern and flush pipe) but including, making connections and demolition of concrete / lime concrete bedding for taking out existing broken squat pan, complete all as specified and directed. |
| 60 | S&F in repairs wash hand basin, white flat back size 550 x 400mm including 32mm dia PVCwaste pipe and waste coupling with & including angle iron brackets of suitable size & length or erecting stand etc., complete all as specified and directed. |
| 61 | S&F in repairs CP grating doom 125 mm dia with waste hole, complete all as specified and directed. |
| 62 | S&F in repairs 100mm/75 mm stainless steel grating, complete all as specified and directed. |
| 63 | S&F in repairs chormium plated wall mixer 3-in-1 system wall mixer with overhead and hand shower arrangement with connecting legs, wall flanges and wall bracket for hand shower for fixing in 15 mm dia pipe, complete all as specified and directed. |
| 64 | S&F in repairs chromium plated overhead shower 180mm Square with arm 400x25x25mm square shape for wall mounted shower with flange for fixing in 15 mm dia pipe, complete all as specified and as directed. |
| 65 | S&F in repairs 15mm bore bib cock, cast copper alloy, long body chromium plated, fancy type, with capstan handle, screwed down, screwed from iron pipe or for brass ferrule, complete all as specified and directed. |
| 66 | S&F in repairs 15mm bore dia, stop valves / Angle Valve, cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed. |
| 67 | S&F in repairs 15mm bore stop cock/angle cock, two way, fancy type,with long shank cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both end, complete all as specified and directed. |
| 68 | S&F in repairs 15 mm bore pipe CP brass center hole wash hand basin mixer for mixing hot and cold water screwed down for iron pipe and fixed, complete all as specified and directed. |
| 69 | S&F in repairs towel ring 200 mm dia and made out of 8-10 mm dia hollow tubes superior quality, complete all as specified and directed. |
| 70 | S&F in repairs glass shelves fancy type 8 to 10 mm thick glass 550 mm long, complete all as specified and directed. |
| 71 | S&F in repairs 6 mm thick glass corner shelves fancy type 225x225 mm size, complete all asspecified and directed. |
| 72 | S&F in repairs brass soap dish, Fancy type, fixed to wall with plug and screw, complete all as specified and directed. |
| 73 | S&F in repairs 32 mm dia bore PVC flexible pipe for wash hand basin, complete all as specified and directed. |
| 74 | S&F in repairs 15mm PVC connection of length 600mm with PTMT nuts of superior quality, complete all as specified and directed. |
| 75 | S&F towel rail 600mm long of PTMT fixed with and including chromium plated brass screw and wooden/plastic cleats.(minimum weight 190grms), complete all as specified and directed. |
| 76 | S&F 50mm dia PVC pipe low density (LDPE) of pressure 6kg/sqcm fixed to wall or laid in floor as waste pipe, complete all as specified and directed. |
| 77 | S&F in repairs 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed |
| 78 | S&F 75mm outlet PVC (SWR) floor trap with chromium plated grating including Jointing to waste pipe and fixed in cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate), complete all as specified and directed. |
| 79 | Demolition and breaking up or down PVC /AC/CI /Cement rain pipe fixed in any position any dia of pipe, complete all as specified and directed. |
| 80 | S&F 110mm dia PVC (SWR) pipes single soketed in any length with rubber ring jointed fixed to wall, complete all as specified and directed. |
| 81 | S&F 75mm dia PVC (SWR) pipes single soketed in any length with rubber ring jointed fixed to wall, complete all as specified and directed. |
| 82 | S&F 110mm bore PVC (SWR) bends any radius fitted with oval access doors, complete all as specified and directed. |
| 83 | S&F 110mm bore PVC (SWR) bends any radius fitted, complete all as specified and directed. |
| 84 | S&F 75mm bore PVC (SWR) bends any radius fitted, complete all as specified and directed. |
| 85 | S&F 75mm bore PVC (SWR) bends any radius fitted with oval access doors, complete all as specified and directed. |
| 86 | S&F 75mm bore PVC (SWR) vent cowl, complete all as specified and directed. |
| 87 | S&F 110mm bore PVC (SWR)junction single, (Single T) equal or unequal, complete all as specified and directed. |
| 88 | S&F 110mm bore PVC (SWR)junction single, (Double T) equal or unequal, complete all as specified and directed. |
| 89 | S&F 75mm bore PVC (SWR)junction single, (Single T) equal or unequal, complete all as specified and directed. |
| 90 | S&F 75mm bore PVC (SWR)junction single, (Double T) equal or unequal, complete all as specified and directed. |
| 91 | Demolition of reinforced cement concrete in floors , beams , chajjas , landing slab in any position or height and similar suspended works, complete all as specified and directed. |
| 92 | M&L for RCC 1:2:4, Type B1 (using 20mm graded crushed stone aggregate) for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed. |
| 93 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work for fair finished surface, not exceeding 200mm thick (Horizontal or sloping), complete all as specified and directed. |
| 94 | S&F mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips, complete all as specified and directed. |
| 95 | M&L for cleaning surface of sunken portion wall / bottom and applying cement slurry @1.2 Kg per Sqm and applying 15mm thick cement plastred in CM 1:3 finished even and fair using extra cement and applying two coats of acrylic polymer modified cementious slurry as per manufactureas instruction to make the surface leak proof, complete all as specified and directed |
| 96 | S&F in repairs 20mm dia chromium plated steel drapery curtain rods including brackets, end finials (Latoo), for curtain rails fancy decorative type and fix with brass screws to walls approved quality etc., complete all as specified and directed. |
| 97 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc., complete all as specified and directed. |
| 98 | M&L for Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6m mean radius built in in CM 1:6, complete all as specified and directed. |
| 99 | Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including necessary forms mould mitred / stopped ends etc., complete all as specified and directed. |
| 100 | M&L for PCC 1:3:6, type C-2 (using 40mm graded crushed stone aggregate) as in surface channel, drains and RCC post including necessary form work, complete all as specified and directed. |
| 101 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 102 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 103 | S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 104 | M&L for Plain Cement concrete, 1:3:6, type C-2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete, post / Kerb / parafits etc., complete all as specified and directed. |
| 105 | S&F 18/19mm thick prelaminated particle board, interior grade, prelaminated on one side with decorative choice lamination fixed with screws to timber frame work including teak wood beading, complete all as specified and directed. |
| 106 | S&F in repairs Kitchen plate rack made of stainless steel 1mm wall thickness with plugs washers asoverall size of 600mm x 750mm including fixing to wall and all required assessaries, complete all as specified and directed. |
| 107 | Dismantling framed timber scantling, 40 Sqcm and over in section in any position including rafters and purlins, wooden planks, complete all as specified and directed. |
| 108 | Dismantling unframed timber scantlings 40 Sqcm and over in section any position, complete all as specified and directed. |
| 109 | M&L for Second Class hard wood and scantling timber framed and fixed clean sawn, complete all as specified and directed. |
| 110 | M&L for Second Class hard wood and scantling timber framed and fixed wrought, complete all as specified and directed. |
| 111 | Dismantling boarding, any description, fixed in any position withnails in existing wooden slab complete all as specified and directed. |
| 112 | M&L for Second class hard wood clean sawnplanks, width n exc. 20 cm and 40mm thick fixed in existing wooden slab, complete all as specified and directed. |
| 113 | M&L forFillercoatwithgrey filler or liquid wood filler, transparent, and bringing gringing of existing wooden surfaces to smooth even finish, complete all as specified and directed. |
| 114 | M&L for French polishing on surfaces of any description,width or girth including cleaning and preparing the surface including a coat of woodfilleronnew wooden works surfaces with two or more coats finish, complete all as specified and directed. |
| 115 | M&L for French polishing on surfaces of any description,width or girth including cleaning and preparing the surface including a coat of wood filler but one or more coats on old wooden work surface, complete all as specified and directed. |
| 116 | Demolition of cement concrete (unreinforced) in ground floor and pavings not exc 15cm thickness (below or above ground level)including surface finishes of any type i.e tiles, kota stone, complete all as specified and directed. |
| 117 | M&L for 75mm thick PCC 1:3:6, type C-2 (using 40mm graded crushed stone aggregate) as in pavement / plinth protection, plinth protection shall be laid in alternate bays and joints shall be filled with bitumastic gola with 80/25 bitumen (1 part bitumen mixed with 3 part of sand) finishing surface even and smooth without extra cement, complete all as specified and directed. |
| 118 | M&L for 75mm thick PCC 1:3:6, type C-2 (using 40mm graded crushed stone aggregate) as in sub base, complete all as specified and directed. |
| 119 | M&L for 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed. |
| 120 | M&L for DWCPE (SN8) 180 (OD) /163(ID) mm diameter pipe laid on150 mm thick bed including excavation in any type of soil, manholes / drop manhole of standard size made of Brick masonry / RCC/ Precast RCC with SFRC ventilating cover and frame. (Includes all items and activities to execute and make sewer line functional) and layed over and including 150mm thick bedding 1:4:8, type D-2 (using 40mm graded crushed stone aggregate) and depth 0.70m to 1.65 m average, complete all as specified and directed. |
| 121 | M&L for LLDPE septic tank for 25 users With UPFLOW FILTER INLCUDING MEDIA, designed to carry sewage and sullage water, including excavation in any type of soil, PCC 1:4:8type D-2 (using 40mm graded crushed stone aggregate) below foundation, Vent shaft, connection etc., complete all as specified and directed. |
| 122 | M&L for Soakage well of size 1.8m dia X 6.0m deep excavation in ordinary Soil, Foundation in PCC 1:3:6, wells of Honey combed and solid in M-25 Concrete, including intercepting chamber,screen chamber Brick work in CM 1:4, RCC cover slab in M-25 / RR masonry / Filling with brick bats, complete all as specified and directed. |
| 123 | Schedule \"A\" Part-II (E/M Works) |
| 124 | Taking down carefully (copper/aluminum) unsv point wiring complete of any type (batten/surface conduit or concealed) for light point, fan point, bell point ,socket point or power point includingfixture and fitting such as switches , ceiling roses, pendants , regulators , sockets , light fitting etc. removing material to store for keeping in safe custody or for taking credit( credit for above items should be made asper conditions seperately) and making good the disturbed surfaces of wall/floor or ceiling to match with existing surfaceand finishing the surfaces as per existing,complete all as specified and directed. |
| 125 | M&L for Point wiring with 1.5 sqmmcopper conductor FRLSH(multistrand) PVC insulatedISI marked unsheathed copper wire 1100 volt grade in and including concealed / surface, non metalic rigid PVC medium grade ISI marked conduit not less than 19 mm with all fittings& other accessories and also includingPVC insulated ISI marked unsheathed FRLSH copper wire cable 1100 volts grade of size 1.5 sqmm copper conductor as earth wire to common earth dolly including concealed in wall / ceiling,modular MS box with modular cover plate with frame suitable for modular switches, sockets, fan regulatoretc for the following :- Note - Colour code of cable Phase-Red, Neutral- Black and Earth -Green) |
| 126 | All as per Ser item No 123.00 here in above but light / fan point controlled by one way switch 6 amps 240 volts |
| 127 | All as per Ser item No 123.00 here in above but light / fan point controlled by two way switch 6 amps 240 volts |
| 128 | All as per Ser item No 123.00 here in above but bell point controlled by one bell push switch 6 amps 240 volts |
| 129 | All as per Ser item No 123.00 here in above but 3 pin 6 Amps switch socket outlet point on independent Board. |
| 130 | All as per Ser item No 123.00 here in above but 3 pin 6 Amps switch socket outlet point on same board. |
| 131 | M&L for Point wiring with 2.5 sqmmcopper conductor FRLSH(multistrand) PVC insulatedISI marked unsheathed copper wire 1100 volt grade in and including concealed / surface, non metalic rigid PVC medium grade ISI marked conduit not less than 19 mm with all fittings& other accessories and also includingPVC insulated ISI marked unsheathed FRLSH copper wire cable 1100 volts grade of size 2.5 sqmm copper conductor as earth wire to common earth dolly including concealed in wall / ceiling,modular MS box with modular cover plate with frame suitable for modular switches, sockets, fan regulatoretc for the following :- Note - Colour code of cable Phase-Red, Neutral- Black and Earth -Green) |
| 132 | S&F modular switch 1 way 6 Amp, 230 volts ,1 Module, complete all as specified anddirected. |
| 133 | S&F modular switch 2 way 6 Amp, 230 volts ,1 Module, complete all as specified anddirected. |
| 134 | S&F modular Socket6A, 230 volts,5 Pin universal, 2 Module, complete all as specified and directed. |
| 135 | S&F Modular switch 1 way, 16 Amp, 240 volts ,1 Module, complete all as specified and directed. |
| 136 | S&F Modular socket 6/16 Amp (euro socket), 250 volts, 2 Module, complete all as specified and directed. |
| 137 | S&F modular bell push switch with indicator 6 Amp 240 volte, 1 Module, complete all as specified and directed. |
| 138 | S&Fbell electric AC,230V, single phase ,ding dong type, complete all as specified and directed |
| 139 | M&L for ceiling rose with three terminal as per relevant IS complete as specified and directed |
| 140 | S&F modular step type fan regulator suitable for 120 watt 250 volts, 2 Module, complete all as specified and directed. |
| 141 | S&F decorative box type fitting with blue colour end cap for LED tube 20 watt luminaire for 230 volt AC including LED tube 20 watt, complete all as specified and directed. |
| 142 | S&F energy saving new generation 10 watt LED IP 65 bulkhead luminaire with opal diffuser with 10 watt LED lamp etc., complete as specified and directed. |
| 143 | S&F mirror light sleek LED mirror light 10 watt provided with high output diffuser with suitable capacity driver with all componants as per manufacturer etc., complete as specified and directed. |
| 144 | S&F decorative type lamp holder suitable for pin type LED 10 watt including lamp etc., complete as specified and directed. |
| 145 | Disconnecting all water and electric connection of geysers and taking down carefully installed storage type electric geysers of any capacity of any make/type/size (Horizontal/vertical) lowering and setting aside opening geysers examining and checking thoroughly for requisite repair/replacement of defective / wornout / unserviceable components / parts meterials including preparing inventory for each geyser separately in presence of Engineer-in-Charge and removing all scale and dirt de-scaling of deposited in inner copper tank and outer tank and heating elements by HCL or aqua clear pedilite solution, thermostat, incator lamp, assemble checking electrical connection, stopping of minor leaking by soldering / brazing of the inner copper tank and replacement of defective worn out unserviceable components / parts and painting of geyser 50 Ltrs after scraping, cleaning,knotting and stopping including preparation of surface of geyser and rubbing with ammery paper for painting with one coat of duco paint by spray painting mation to achieve glossy finish of approved make first quality and rewrite MES No. on the body of geyser with black synthetic enamel paint(Letters and figures 2 cm high) & re-fixing geyser in its original location including hoisting, connecting to water & electric connection and testing for proper functioning of geysers including earthing to the entire satisfaction of the Engineer-in-Charge including the replacement of the following items etc., complete all as specified and directed. |
| 146 | (a) Supply only Fiber reinforced PVC nylon pipe heavy duty size 450 mm long 15 mm bore with brass coupling chromium plated with rubber washers as both ends as per IS:-01 Nos (b) Supply only Flexible chromium plated pipe size 450 mm long 15 mm bore with brass coupling chromium plated coupling suitable for geyser and capacity -01 Nos |
| 147 | S&F 25 Litre capacity storage type water heater (Geyser), BEE 5 Star rated, vertical wall mounting type made out of CRCA outer body stainless steel storage tank, titanium enamelled heating element thermostat, thermal cutout, glass wool including 15 mm, 450 mm long (cold water pipe ), 15 mm, 450 mm long armourd pipe (hot water pipe) etc complete including making necessary electrical and water connections with 2.5 sqmm 3 core copper multistandred cable with top indicator plug top 15 amp from geyser connection to socket including hold fast for fixing of new geyser and writing the MES No., complete as specified and directed. |
| 148 | Taking down carefully ceiling fan any type, sweep and make for overhauling including dismantling of blade frame and opening and examining motor cleaning of dust/dirt of fan cleaning and greasing of ball bearing and bushes with fresh oil and best quality of grease respectively and reassembling of complete fan after refixing parts in its original location and hanging connecting and testing ceiling fan for smooth functioning incl replacement of rubber real insulator, split pin, nut, bolt, washer, 3 core flexible cable from connector to ceiling rose and painting with one coat of synthetic enemel paint with spray painting machine, complete all as specified and directed. |
| 149 | S&F in repairs heavy duty exhuast fan 300mm sweep, 900 rpm turbo force model single phase including all accessories as per manufacturer norms and unserviceable fan deposited in MES store yard etc., complete as specified and directed. |
| 150 | S&F ceiling fan complete with blades, down rods, electronic regulator and accessories, 230 volt, 1200 mm sweep, Minimum air delivery 210 CFM with service value 3.00 BEE, Five Star rated with brushless direct current motor, complete all as specified and directed. |
| 151 | S&F in replacement of existing unsv street light fittings with LED street light fitting 45 Watts, IP-66, having pressure die cast alumnium alloy housing with heat resistant toughned glass with individual peanut LED lenses and Driver shall be IP-66 for water protection, including surge protection device 5 KV including making connections with PVC insulated and sheathed three core multi stranded aluminium conductor cable of size 1.5 Sqmm, complete all as specified and directed. |
| 152 | S&F epoxy powder coated or polystrene insulated material sheet metal enclosure factory made (double door)8 way SPN suitable for MCB DB\"s 240 Voltswith 200 Amps rated busbar, neutral & earthing link bar, flush/surface mounting, complete all as specified and directed. |
| 153 | S&F epoxy powder coated or polystrene insulated material sheet metal enclosure factory made (double door)4 way VTPN suitable for MCB DB\"s 415 Voltswith 200 Amps rated busbar, neutral & earthing link bar, flush/surface mounting, complete all as specified and directed. |
| 154 | S&F MCB of single poles and current carrying capacity 6 to 32 Amp,240V, 10 KA\"C\" curve, in the MCB DB complete with connection testing and commissioning, complete all as specified and directed. |
| 155 | S&F MCB of single poles and current carrying capacity 40 to 63 Amp,240V, 10 KA\"C\" curve, in the MCB DB complete with connection testing and commissioning, complete all as specified and directed. |
| 156 | S&F MCB of single poles and neutral and current carrying capacity 40-63 Amp, 240V, 10 KA \"c\" curve in the MCB DB complete with connection testing and commissioning, complete all as specified and directed. |
| 157 | S&F MCCB 100 Amps, 4 pole, 16 KA working on 415 Volts, 50 HZ AC supply, complete all as specified and directed. |
| 158 | Sub main wiring with two runs of single core PVC insulated multistranded un-sheathed FRLS cable of size 6.0 Sqmm with stranded copper conductor, drawing into concealed PVC conduit / surface batten (including PVC conduit of requisite dia and accessories) with one run of continuous PVC insulated multistranded unsheathed FRLS cable earth wire of size 6.0 Sqmm (in green volour) including taking out unserviceable sub main wiring, complete all as specified and directed. Note : Note :2 runs of 6 sqmm copper cable & 1 run of 6 sqmm copper cable in and including 25mm PVC conduit shall be measured as one unit. |
| 159 | Sub main wiring with two runs of single core PVC insulated multistranded un-sheathed FRLS cable of size 4.0 Sqmm with stranded copper conductor, drawing into concealed PVC conduit / surface batten (including PVC conduit of requisite dia and accessories) with one run of continuous PVC insulated multistranded unsheathed FRLS cable earth wire of size 4.0 Sqmm (in green volour) including taking out unserviceable sub main wiring, complete all as specified and directed. Note : Note :2 runs of 4 sqmm copper cable & 1 run of 4 sqmm copper cable in and including 25mm PVC conduit shall be measured as one unit. |
| 160 | Earthing complete with galvanized mild steel earth plate electrode size 600mm x 600mm x 6mm thick buried directly in ground (preferably in vertical position) earth pit not less than 2.25 meter below normal ground level with top edge of the earth plate not less 3 meter (BGL) connected to galvanized iron earth lead wire 4mm dia by means of bolts, nuts, check nut and washer of galvanized iron including PCC pit in RCC 1:2:4 type B-1, precast RCC cover with suitable handle, excavation and earth work in any type of soil, 20mm bore “medium grade” galvanized iron water tubing fixed with cast iron funnel and wire mesh and 15mm bore “light grade” galvanized iron protection pipe for earth lead wire up to 7.5m length, charcoal, common salt, complete all as shown in EP No 3 of SSR 2009 Part-I, connected to test point complete, all as specified and testing on completion. Note: (i) The unit rate includesmain earthing lead/strip from earth electrode to test point up to 7.5 meter (ii) In case measured value of earth resistance is recorded more than 1.0 ohms then the earthing shall be re done by the contractor without any extra cost to the department. |
| 161 | Supply, laying, jointing, testing XLPE insulated PVC sheathed with stranded aluminium conductor heavy duty, size of cable 25 Sqmm 4 core, conforming to IS 1554 Part I / ISI marked, including cable glands , cable lugs etc, to suitablethe cable size, cables to be laid in trenches, fixed along the poles bare or through GI pipe laid under floors road etc fixed concealed in walls encased in GI pipe etc. including taking out old existing cable, complete all as speccified and directed. |
| 162 | Excavation in trenches, n. exc 1.5 m wide and n. exc 1.5m depth and getting out in for foundation of pole,stay,laying of cable and pipe in any type of soil, complete all as specified and directed |
| 163 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in any type of soil, complete all as specified and directed. |
| 164 | Removing excavated materials (soil) to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point, complete all as specified and directed. |
| 165 | M&L for sand cushioning in trenches spreading and consolidation 8 cm thick before laying the cable and 15 cm of the sand after laying the cable but will be measured 18 cm after punning etc., complete all as specified and directed. |
| 166 | M&L for laying of bricks well burnt sub class B (old size) laid flat for cable protection width equal to the length of bricks, complete all as specified and directed |
| 167 | S&F 40mm dia galvanised steel tube, light grade, for protection of copper strip/cable at wall and duct/road/trench, complete all as specified and directed. |
| 168 | Deduction to be made from BOQ for Schedule \"A\" Part-III (Credit Schedule from dismentling / taking down items) worth Rs 1,15,908.00 during AOC. (Note :- Tenderers shall not quote for this Schedule) |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
