Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Earth work in all kind of soil within 50m. Initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per the direction of the Engineer-in-charge. |
| 2 | Extra lift of 1.5m or part there of over the initial lift of 1.5m in all kinds of embankments and road works and ordinary earth work in general. |
| 3 | Filling in foundation, trenches and plinth withriver sand, well watered and compacted in layers of 0.3 mtr, with top surface dressed and leveled to proper gradientincluding cost of all materials, conveyance, all taxes and royalties, loading and unloading, including cost of all labour,sundries ,T & P etc. All complete as per directions of the Engineer -in-charge. |
| 4 | Providing and laying of Cement Concrete of grade 1: 4 :8 (1cement : 4 sand : 8 graded stone aggregate 40 mm nominal size ) of approved quality from quarrymixing in concrete mixer ,lowering and compacting in proper thickness , watering & curing for the required period .including all cost of labour ,material,conveyance,royalties and taxes ,sundries ,T & P etc. but excluding the cost of centering and shuttering all complete as per the directions of Engineer-in-charge. |
| 5 | Providing and laying of Cement Concrete of grade 1: 3 :6 (1cement : 3 sand : 6 graded stone aggregate 20 mm nominal size ) of approved quality from quarrymixing in concrete mixer ,lowering and compacting in proper thickness , watering & curing for the required period .including all cost of labour ,material,conveyance,royalties and taxes ,sundries ,T & P etc. & including the cost of centering and shuttering all complete as per the directions of Engineer-in-charge. |
| 6 | Providing anti-termite treatment using approved quality of chemical emulsion, spraying the mixture uniformly by sprayer as preconstructional anti termite treatment and creating a chemical barrier under and around the column pits, wall trenches, top surfaceof plinth filling, junction of walls & floors along with external perimeter of the building, expansion joints, surrounding the pipesand conduits etc. complete at the rate as directed by the manufacturer confirming to IS:6313 (Part-II) and as per direction ofEngineer-in-charge including cost of all materials, labour, taxes, sundries, T&P etc. complete. (The payments shall be made on the basis of actual plinth area of the building at Ground Floor & vertical faces will not be measured for payment.) Note:- The Contractor shall have to furnish 10years Guarantee to maintain the anti-termite treated area / structures free from termite. |
| 7 | Filling available excavated earth (excluding rock) in trenches plinth sides of foundation etc. in layers not exceeding 20 cm in depth , consolidating each deposited layers by ramming and watering, lead up to 50m and lift up to 1.5 mt etc. including cost of all labour, sundries T & P etc complete in all respect as per the direction of Engineer-In-Charge. |
| 8 | Providing Fly ash bricks masonry work using(250mmx120mmx80mm size) having crushing strengthnot less than 75Kg/Sqcm in cement mortar (1:6). Immersing the bricks in water before use in all necessary projection splays cutting, circular moulding, corbelling etc. Including cost of conveyance ,taxes& royalties, loading and unloading of all materials & cost of all labour, scaffolding ,watering & curing ,sundries, T & P etc. complete as per the direction of Engineer-in-charge . |
| 9 | RCC work M-25 grade as per approved designs and drawings having a minimum compressive strength (in work test) 25 N. / Square mm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 456 and I.S. 516 using 12 mm. to 20 mm. size black hard crusher broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned (20 mm. size chips not to exceed 25 % ) to be mixed in concrete mixture with approved grade cement including hoisting, lowering, laying and compacting concrete by using vibrators, watering and curing for 28 days and finishing the exposed surface smooth providing grooves or beads wherever necessary including centering & shuttering cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P, required for the work etc. complete in all respect as per direction of the Engineer in charge. |
| 10 | Column |
| 11 | Plinth Beam |
| 12 | Column |
| 13 | Roof Beam |
| 14 | Roof Slab |
| 15 | Staircase |
| 16 | Lintel |
| 17 | chajja |
| 18 | Column |
| 19 | Roof Beam |
| 20 | Roof Slab |
| 21 | Providing, fixing in position TMT Fe-500 reinforcement bars for RCC work of required diameter of approved quality including straightening, cutting, bending, binding, welding and joining (if necessary) and tying the grills and placing in position as required for R.C.C. work and providinghoisting, lowering and laying including cost, conveyance and taxes oftor steel and binding wires of 18 gauge and labour required for the work for bending, binding and tying the grills in all heights as per the specification & direction ofEngineer -in-charge. (Linear measurements will be taken & quantity will be calculated on standard weight. Weight of binding wire will not be considered for measurement.) |
| 22 | Ground Floor |
| 23 | Terrace Floor |
| 24 | Providing Fly ash bricks masonry work using(250mmx120mmx80mm size) having crushing strengthnot less than 75Kg/Sqcm in cement mortar (1:6). Immersing the bricks in water before use in all necessary projection splays cutting, circular moulding, corbelling etc. Including cost of conveyance ,taxes& royalties, loading and unloading of all materials & cost of all labour, scaffolding ,watering & curing ,sundries, T & P etc. complete as per the direction of Engineer-in-charge . |
| 25 | Terrace Floor |
| 26 | Providing Fly ash bricks masonry work using(250mmx120mmx80mm size) having crushing strengthnot less than 75Kg/Sqcm in cement mortar (1:4). Immersing the bricks in water before use in all necessary projection splays cutting, circular moulding, corbelling etc. Including cost of conveyance ,taxes& royalties, loading and unloading of all materials & cost of all labour, scaffolding ,watering & curing ,sundries, T & P etc. complete as per the direction of Engineer-in-charge . |
| 27 | Terrace Floor |
| 28 | Providing 16mm thick cement plaster to thesurface ofbrick masonry wall with cement mortar (1:6) including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats only to proper plumbs and level and making grooves and beads to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing, sundries and T&P etc all complete as per direction of the Engineer -in-charge |
| 29 | Terrace Floor |
| 30 | Providing 12mm thick cement plaster to thesurface ofbrick masonry wall with cement mortar (1:6) including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats only to proper plumbs and level and making grooves and beads to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing, sundries and T&P etc all complete as per direction of the Engineer -in-charge |
| 31 | Providing 6mm thick cement plaster with cement mortar of (1:4) to ceilings of roof slabs, stairs, landings, chajja, shelves, columns, beams and lofts etc. including roughening, scraping and cleaning and finishing the plastered surface smooth using wooden floats only to proper plumbs and level, making grooves and beads to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing ,sundries and T&P etc all complete as per direction of the Engineer -in-charge |
| 32 | Providing average 25mm thick grading Concrete with (1:2:2) using 6mm black hard granite chips using 2% water proofing cement compound of approved quality over top of Roof, Terrace, including cost of scaffolding, scraping and cleaning the roof surface, plastering and finishing smooth to proper slope and gradient including cost of all materials, conveyance and sundries, T&P etc. complete as per direction of the Engineer -in-charge. |
| 33 | Providing fitting and fixing up partition walling OEL aluminum anodized section No.9210 and 9207 as single groove and double groove respectively as horizontal and vertical member and OEL section 4660 as Tapered clip for fixing up 12mm thick pre laminated board (Nova pan Make) and jointing angle No. 1855 etc |
| 34 | Providing fitting and fixing up partition walling OEL aluminum anodized section No.9210 and 9207 as single groove and double groove respectively as horizontal and vertical member and OEL section 4660 as Tapered clip for fixing up 12mm thick black glass (I.S.I) and jointing angle No. 1855 etc |
| 35 | Providing fitting, fixing of Al. door with OEL anodized Al. door section of 9202 as vertical member, 9201 as top member and 9200 as bottom and middle member and 12mm thick pre-laminated board fixed on door frame by means of tapered clip No. 4660 and the frame to be completed by means of jointing angle No. 1855 including all cost of labour, T&P , hire charges of drilling machine, labour charges etc. complete |
| 36 | Providing and fixing of Fixed Ventilators of approved maketo be fabricated from roll formed sections made of pre-painted steel (base steel as per IS-513 of 0.6 mm thick “D” quality, galvanized as per IS-277 with zinc of 120 Gm/Sq.mtr) with paint specification being with primer of 5-7 microns and finished paint with polyster paint (Black /Pearl white/ Chocolate Brown) of 12-16 microns alongwith the alkyd backer at the back of 5-7 microns and the sizes of outer frame being of 46x52 mm and with all vertical and horizontal mullions are of 46x70 mm and fixed beadings are of 18x25 mm. Accessories / gaskets are to be used as per the manufacturer’s supply and specification like handle being made of high grade aluminium powder coated and with nylon receiver and gasket will be made of EPDM. All corner brackets are to be made of CRCA with zinc phosphating. The mullion caps and louvered-clips should be of glass filled nylon. The sections are to be cut to length ,mitre joined with corner bracket and frames are fixed to the concrete/masonry walls by means of self expanding screws and glass to be used of 5 mm reflective with all taxescomplete. |
| 37 | Providing, fitting & fixing M.S grillfabricated from 12mm and 16mm square bars as per approved drawing and design including cost, conveyance & taxes of all materials, fabrication charges, fixing in position to RCC columns /walls in cement concrete (1:2:4) and making good to the damages complete as per direction of the Engineer-in-charge.The rates shall be inclusive of all cost of Materials, labour, T&P Shuttering etc complete |
| 38 | Supplying, fitting and fixing of M.S. shutter with frame with M.S. angle with welding of 25x35x6mm and shutter section of 35x35x6mm Outer frame, 30x30x5mm M.S. angle with welding of 25x6mm flat and welding of 16gauge C.R. sheet with arrangement of clamp. Fitting of 3 nos. Of 4\" hinges, 1 no of 2\" hinges and 300mmx16mm M.S. aldrop with 8\"tower bolt including the cost of painting 2 coats over a coat of primer , conveyance, taxes of all materials, labour, T&P etc. rquired for the complete in all respect. |
| 39 | Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of crosssection 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. |
| 40 | 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin,moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856,complete as per direction of Engineer-in-charge. |
| 41 | Providing and fixing offixed Glazing with part Top hung of approved maketo be fabricated from roll formed sections made of pre-painted steel (base steel as per IS- 513 of 0.6 mm thick “D” quality, galvanized as per IS-277 with zinc of 120 Gm/Sq.mtr) with paint pecification being with primer of 5-7 microns and finished paint with polyster paint (Black /Pearl white/ Chocolate Brown) of 12-16 microns alongwith the alkyd backer at the back of 5-7 microns and the sizes of outer frame being of 46x52 mm and with all vertical and horizontal mullions are of 46x70 mm and fixed beadings are of 18x25 mm. |
| 42 | Painting synthetic enamel paint of approved brand and manufacture of required colour to give an even shade with two or more coats on new work over a coat of suitable shade with primer of approved brand as per manufacturer\"s specification including cost of all materials with taxes and transportation, all labour, scaffolding, sundries, T&P etc. All complete as per the direction of the Engineer -in-charge. |
| 43 | Painting two coats with Water soluble weather coatpaints of approved shade of approved make or equivalent overout side brick wall over a coat of primer, by means of brush to outside surface of newwalls after scraping, cleaning the surface including all cost of materials, scaffolding, labour, watering & curingT&P etc complete as per direction ofEngineer -in-charge. |
| 44 | Terrace Floor |
| 45 | Painting with two coats of Distemper to walls, two coats of putty and one coat of primer on the plastered surface by means of rollers to give an even shade including cost ofall materials, labour,conveyance, taxes, royalties, scaffolding, sundries, T&Petc, All completeas per the direction of the Engineer-in-charge |
| 46 | Painting with two coats of of stucco putty on the plastered surface by means of rollers to give an even shade including cost ofall materials, labour,conveyance, taxes, royalties, scaffolding, sundries, T&Petc, All completeas per the direction of the Engineer-in-charge |
| 47 | Supplying ,Fitting and fixing of stainless Steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, pollishing etc. with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect. |
| 48 | Making plinth protection 50mm thick cement concrete 1:3:6 over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. |
| 49 | Providing and fixing to wall or ceiling and floor pvc pipes class conforming to ASTM-D-1785/89 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceilingand floor all complete as per specification complete. as per specification and direction of Engineer in-charge.Make:SUPREME/ASHIRVAD/ASTRAL20mm dia(Oriplast/Supreme/Astral) |
| 50 | 25mm dia(Oriplast/Supreme/Astral) |
| 51 | 32mm dia(Oriplast/Supreme/Astral) |
| 52 | 40mm dia(Oriplast/Supreme/Astral) |
| 53 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (SDR-11)conforming to IS 15778, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. Thisincludes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer- in-Charge .40mm dia |
| 54 | 32mm dia |
| 55 | 25mm dia |
| 56 | 20mm dia |
| 57 | 15mm dia |
| 58 | Providing and fixing to wall or ceiling and floor UPVC-ASTM Standard (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceilingand floor all complete as per specification complete.50mm dia |
| 59 | 40mm dia |
| 60 | 32mm dia |
| 61 | 25mm dia |
| 62 | 20mm dia |
| 63 | Supplying, fixing and testing Ball Valve UPVCSch-80 (Solvent welded with Metal ball) all material, labour, T&P & fitting, and fixing the following different water supply fittings including supply of all necessary jointing materials etc. all complete as directed by the Engineer -in - charge. 40mm dia |
| 64 | 32mm dia |
| 65 | 20mm dia |
| 66 | Cutting holes through existing brick work including makinggood the same in cement mortar (1:4) for takingGI/PVC pipes and fittings etc all complete as per specification & direction of the Engineer-in-charge. |
| 67 | Cutting hole in R.C.C floors and roofs upto 19 cm thick for passing G.I / P.V.C pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4) including finishing complete so as to make it leak proof complete as per the direction of the Engineer-in-charge. |
| 68 | Providing all materials labour, T&P for Cutting grooves in pucca floors and walls for takingGI/PVC pipes and making good the damages as per specification & as per specification &direction ofEIC. |
| 69 | Providing all materials, labour,T&P ,fittings and fixing of different water supply (CP onBrass) fitting (Quarter Turn or as specified) as per IS specification & approved make in all floor of following sizes and specification with leak proof threaded joints with thread seal tape or any other method as required anddirected includingalltaxes, duties, transportation etc., testing and rectification of defects after testing complete as per direction of Engineer-in-charge. |
| 70 | Fixing 15mm dia pillar taps capstan head screw down high pressure lettered ‘Hot’ and ‘Cold’ with long screws, shanks and back nuts of the following nominal bore as per specification |
| 71 | 15mm dia c.p.long body bib cock |
| 72 | 15 mm CP 2 in 1 Bib cock . |
| 73 | Providing all materials, labour, T&P forFixing of Brass Ball Valve (Horizontal plunger type) conforming to IS 1703-1977 as per specification allcompleteas per specification and direction of Engineer-in-charge..25mm dia Brass ball valve |
| 74 | 32mm dia Brass ball valve |
| 75 | 40mm dia Brass ball valve |
| 76 | 15mm dia PVC connecion pipe 450mm long |
| 77 | 15mmx25mm C.P. Extension piece |
| 78 | Providing and fixing circular type stainless steel jalli (grating) with hole for floor/nahani trap etc. complete as per specification and direction of the EIC. |
| 79 | Concealed Brass CP stop cock regular body suitable for 20mm pipeline with spindle extension & plasticprotection cap& Exposed Part Kit of Concealed Stop cock & Flush cock with fitting sleeve,operating Lever & adjustable Wall flange with seal. |
| 80 | Fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701--1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position etc all complete as per specification and direction of the Engineer in charge.2000 litre capacity water storage tanks |
| 81 | 1500 litre capacity water storage tanks |
| 82 | Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class–3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard beddingsurroundingorencasingincluding concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge.110mm dia u-pvc SWR pipe (Oriplast/Supreme/Astral) |
| 83 | UPVC single equal Tee (with door) 110x110x110 mm (Oriplast/Supreme/Astral) |
| 84 | 110mm dia u-pvcoffset (Oriplast/Supreme/Astral) |
| 85 | 110mm dia u-pvcdoor bend (Oriplast/Supreme/Astral) |
| 86 | 110mm dia u-pvc plain shoe bend(Oriplast/Supreme/Astral) |
| 87 | 110mm dia u-pvc vent cowl (Oriplast/Supreme/Astral) |
| 88 | 110mm dia u-pvc p-Trap (Oriplast/Supreme/Astral) |
| 89 | 110mm dia u-pvc s-Trap (Oriplast/Supreme/Astral) |
| 90 | 110mm dia u-pvc plain bend (Oriplast/Supreme/Astral) |
| 91 | Providing and fixing 40 mm dia waste Coupling (F/T) complete as per as per direction of Engineer-in-charge. |
| 92 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete as per as per direction of Engineer-in-charge. Make:HINDWARE/PARRYWARE/CERA WITH ISI MARK |
| 93 | Fixing Wash Down Water Closet (European type W.C pan) with integral ‘S’ or ‘P’ trap conforming to IS 2556 : Part 8-2004, to the floor with wooden plug and chromium plated screws including plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers, jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification. |
| 94 | Providing all materials, labour, T&P for fitting and fixing 580 mm x 440mm size white glazed Vitreous China Orissa Pattern squatting pan of approved make in all floorincluding supply of sutaible bracket, PVC wall plug and Brass screws etc. all complete including cost, taxes and conveyance as per specification all complete as per direction of Engineer-in- charge.Make:HINDWARE/PARRYWARE/CERA. |
| 95 | Fixing wash basins with hole for pillar taps conforming to IS 2556 : Part 4-2004 with Cast Iron or M S brackets painted white including bottle trap, cutting holes in walls and making good the damages etc all complete as per specification & as per direction of EIC. (Make:HINDWARE/PARRYWARE/CERA) |
| 96 | Supplying all materials, labour & T&P for fitting and fixing of following sizes of white glazed vitreous china flat back urinal basin confirming to specification of approved make as per IS-2556 with ISI mark in all floor along with supply & fixing of necessary component parts like pair of C.I./M.S. bracket including connection from water supply pipe with all taxes, duties, transportation etc. all complete as per specification & direction ofthe Engineer-in-charge. (Make:HINDWARE/PARRYWARE/CERA). Flat back standing Urinal (Medium) with Urinal Spreader |
| 97 | Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth as per the direction of Engineer-in- charge. |
| 98 | Providing all materials, labour, T&P for fixingoffollowing sizes of Prime mirror (60x45 cm)of 6mm thick mounted on 6mm thick AC back sheet & CP cup screw with PVC wall plugs in all floor including cost, conveyance, taxes of all materials complete as per specification and direction of E.I.C.(Alpina/Golden Fish/Belgion) |
| 99 | Supplying and fixing 20mmx600mm long CP towel rail |
| 100 | Supplying and fixing standard size C.P. SoapDish holder. |
| 101 | Supplying and fixing standard size 32 mmCP Double Coat Robe Hook. |
| 102 | Supplying all materials, labour, T&P, fitting and fixing uPVC SWR pipes (Type-B) for rain water of approved make confirming to IS-13592/1992.with ISI Mark in all floor. |
| 103 | Supplying all materials, labour and T&P for fixing S.W. gully trap Grade-A complete with cast iron grating,brick masonry chamber (250x250mm.) with R.C.C. cover slab as per P.H. specification and design all complete. [ excluding cost of gully trap and grating etc all complete as per approved drawing, specification and direction of the Engineer in charge |
| 104 | Supplying all materials labour & T&P for constructing of brick masonry gully trap chambers earth work in excavation in all kinds of soil, 250mm thick K.B. brick work in C.M. (1:5) with K.B. bricks having crushing strength not less than 75kg/cm2, 12mm thick cement plaster in C.M. (1:3) for both inside and outside of brick masonry work with neat cement punning on Top and inside surface area including benching and channelling work with C.C. (1:2:4) with 12mm Hard granite chips of requisite quantity and then plastering with C.M. (1:3) over it and then smooth finish with neat cement punningincluding cost of RCPC cover slabetc. all complete as per approvedP.H.E.D. specificationand direction of Engineer-in-charge. (300mm x 300mm x 300mm deep) |
| 105 | Supplying all materials, labour and T&P for construction of inspection chamber as per P.H. specification and design etc all complete as per approved specification and direction of the Engineer in charge |
| 106 | Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class–3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard beddingsurroundingorencasingincluding concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge. 75mm dia u-pvc pipe alround concrete |
| 107 | 110mm dia u-pvc pipe alround concrete |
| 108 | Supplying all materials, labour, T&P and construction man hole chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class Fly ash brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mmsizeh.gchips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:1½:3) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge. |
| 109 | Supplying all materials,labour,T&P and constructing soakway pit of the following size with precast RCC rings joined loose,gravel backing in the rear of well steining,precast Rcc cover slab in cement concrete (1:2:4) using 12mm size stone aggregates fitted with iron lifting handles including cutting holes in the rings for inlet pipe,earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works,watering,curing,conveyance of all materials to worksite etc. complete as per specification and direction of the EIC. |
| 110 | Supplying all labour, tools and plants and drilling pilot bore 200 mm dia without casing pipes in all kinds of soils for the following depths excluding supply of necessary cutting equipments, extra sockets (wheneverrequired)etc and withdrawing the boring pipes, washing and keeping the bore clear for logging if required all complete as per the direction of Engineer-in-charge.00mtr to 30mtr |
| 111 | 30mtr to 60mtr |
| 112 | 45mtr to above |
| 113 | Lowering the following size of GI/PVC/MS housing pipes with or without slotted pipes as per the necessity from ground level upto 45.00M depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials,tools and plants etc. all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials. |
| 114 | 30.00M to 60.00M. |
| 115 | Supplying all labour, tools and plant and jointing materials and lowering the pvc casing pipes, fittings and well screens in position including fitting and fixing of centraliser, cutter plug and washing the bore etc complete as per the direction of the Engineer in charge |
| 116 | Supplying all labour, tools and plant and grouting with cement slurry for sanitary sealing in the bore around the upper most 3 metres of 200 mm dia PVC casing pipe properly as per the direction of the Engineer-in-Charge. |
| 117 | Supplying all labour, tools and plant and materials for cleaning and developing the tubewell with compressor continuously washed till clean and adequate discharge is obtained from the tube well including supply and use of necessary equipments and labour complete in all respect as per the direction of the Engineer-in-Charge. |
| 118 | Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submerisble electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trail running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge2 H.P three phase 3 stage head Horizontal Submersible Pump Set |
| 119 | DOL Control panel |
| 120 | 32mm dia steel short piece |
| 121 | Well cap |
| 122 | 50mm size CI bracket |
| 123 | 2.50 sqmm flat cable |
| 124 | Steel rope with cover |
| 125 | 20mm dia rigid UPVC pipes |
| 126 | Labour charges for lowering including transportation |
| 127 | Recessed wiring to light point / first light of group control/ call bell point/ exhaust fan point /wall fan point with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVCconduit with 6 Amp, 250 V clip in type switch ISI marked and ceiling rose ISI marked mounted on G.I modular box with face plate & cover of suitable size ,with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. (Make of Wires- Finolex/Anchor/Polycab/HAVELLS/RR KABEL/KEI) or equivalent) (Make of Conduit-AKG/Anchor/Polycab or equivalent reputed make A catagory ISI marked as approved) (Make of switch/socket- Schneider(Zencelo)/Legrand( myrius) /Panasonic (Europa)/Havells(Equivalent model) or equivalent) (Make of accessories- Anchor/Havells) (Make of G.I box, face plate & cover-Schneider(Zencelo)/Legrand( myrius) /Panasonic (Europa) or equivalent reputed make & model A catagory ISI marked as approved) Group C |
| 128 | Recessed wiring to secondary light pointlooped from primary light point with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVCconduitwith 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor for running earth including3 plate ISI marked Ceiling rose with all accessories & connection as per direction of Engineer in charge.(Make of Wires- Finolex/Anchor/Polycab/HAVELLS/RR KABEL/KEI) or equivalent) (Make of Conduit-AKG/Anchor/Polycab or equivalent reputed make A catagory ISI marked as approved) (Make of switch/socket- Schneider(Zencelo)/Legrand( myrius) /Panasonic (Europa)/Havells(Equivalent model) or equivalent) (Make of accessories- Anchor/Havells) (Make of G.I box, face plate & cover-Schneider(Zencelo)/Legrand( myrius) /Panasonic (Europa) or equivalent reputed make & model A catagory ISI marked as approved)Average Length: 3mtr |
| 129 | Recessed wiring to ceiling fan point with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVCconduit with 6Amp 250V Modular Switch,Stepped type Moudular Regulator, Base & Cover with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor for running earth including all accessories & connection as per direction of Engineer in charge. (Make of Wires- Finolex/Anchor/Polycab/HAVELLS/RR KABEL/KEI) or equivalent) (Make of Conduit-AKG/Anchor/Polycab or equivalent reputed make A catagory ISI marked as approved) (Make of switch/socket- Schneider(Zencelo)/Legrand( myrius) /Panasonic (Europa)/Havells(Equivalent model) or equivalent) (Make of accessories- Anchor/Havells) (Make of G.I box, face plate & cover-Schneider(Zencelo)/Legrand( myrius) /Panasonic (Europa) or equivalent reputed make & model A catagory ISI marked as approved) |
| 130 | Recessed wiringfor 5 / 6 amp socket outletwith6Amp, 250 V clip in type modular switch ISI markedmounted on G.I moular box with face plate & cover of suitable sizeincluding all accesories and connection on same switch board as per direction of Engineer in Charge. (Make of switch/socket- Schneider(Zencelo)/Legrand( myrius) /Panasonic (Europa)/Havells(Equivalent model) or equivalent) |
| 131 | Recessed wiringfor 5 / 6 amp socket outlet with 2 x 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVCconduit with 6Amp, 250 V clip in type switch ISI markedmounted on G.I moular box with face plate & cover of suitable size ,with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection on separate board as per direction of Engineer in Charge. (Make of Wires- Finolex/Anchor/Polycab/HAVELLS/RR KABEL/KEI) or equivalent) (Make of Conduit-AKG/Anchor/Polycab or equivalent reputed make A catagory ISI marked as approved) (Make of switch/socket- Schneider(Zencelo)/Legrand( myrius) /Panasonic (Europa)/Havells(Equivalent model) or equivalent) (Make of accessories- Anchor/Havells) (Make of G.I box, face plate & cover-Schneider(Zencelo)/Legrand( myrius) /Panasonic (Europa) or equivalent reputed make & model A catagory ISI marked as approved) |
| 132 | Recessed wiringfor2 x 6 amp socket outlet controlled by 2 nos6Amp, 250 V clip in type switch ISI markedmounted on single G.I moular box with face plate & cover of suitable sizeincluding all accesories and connection on separate board as per direction of Engineer in Charge. (Make of switch/socket- Schneider(Zencelo)/Legrand( myrius) /Panasonic (Europa)/Havells(Equivalent model) or equivalent) |
| 133 | Recessed wiringfor 6 pin 16 amp socket outletwith 16Amp, 250 V clip in type switch ISI markedmounted on G.I moular box with face plate & cover of suitable sizeincluding all accesories and connection as per direction of Engineer in Charge. (Make of switch/socket- Schneider(Zencelo)/Legrand( myrius) /Panasonic (Europa) / Havells (Equivalent model) or equivalent) |
| 134 | Supplying and fixingof25Amp socket & 25Amp, 250 V moular type starter ISI markedmounted on G.I moular box with face plate & cover of suitable sizeincluding all accesories and connection as per direction of Engineer in Charge. |
| 135 | Recessed wiring to submain in 4 x 10 sq.mmFR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 40 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 2 x 6 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire- Finolex/Anchor/Polycab/ HAVELLS/RR KABEL or equivalent) (Make of conduit-AKG/Anchor/Kinjal or equievalant) |
| 136 | Recessed wiring to submain in 4 x 6sq.mmFR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 32 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 2 x 4.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire- Finolex/Anchor/Polycab/ HAVELLS/RR KABEL or equivalent) (Make of conduit-AKG/Anchor/Kinjal or equievalant) |
| 137 | Recessed wiring to submain in 2 x 6 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 25 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 4.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire- Finolex/Anchor/Polycab/ HAVELLS/RR KABEL or equivalent) (Make of conduit-AKG/Anchor/Kinjal or equievalant) |
| 138 | Recessed wiring to submain in 2 x 4 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.(Make of wire- Finolex/Anchor/Polycab/ HAVELLS/RR KABEL or equivalent) (Make of conduit-AKG/Anchor/Kinjal or equievalant) |
| 139 | Recessed wiring to submain in 2 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire- Finolex/Anchor/Polycab/ HAVELLS/RR KABEL or equivalent) (Make of conduit-AKG/Anchor/Kinjal or equievalant) |
| 140 | Recessed wiring to submain in 2 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.(Make of wire- Finolex/Anchor/Polycab/ HAVELLS/RR KABEL or equivalent) (Make of conduit-AKG/Anchor/Kinjal or equievalant) |
| 141 | Supply and fixing of following way three pole and neutral, sheet steel, MCB distribution, 415 V on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic cover for the MCB knobs detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required ( But with out MCB/ RCCB/ Isolator) (Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9/L&T (Equievalant model)/Panasonic(Equivalent model) /ABB(Equivalant model) or equievalant. |
| 142 | Supply and fixing of single pole MCB with sheet steel enclosure, distribution board, on surface /recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnection, phosphate and powder painted including earthing etc. as required ( But with out MCB/ RCCB/ ISOLATOR) (Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9/L&T (Equievalant model)/Panasonic(Equivalent model) /ABB(Equivalant model) or equievalant. |
| 143 | Supply and fixing of following rating 240 V Minature Circuit Breaker (MCB) having a sensitivity current up to 10kA in the existing MCB DB ISI marked complete with connection testing and commissioning etc as required. (Make-LEGRAND- DX3 DB/ Siemens-Betaguard/ Schneider- Acti 9/L&T (Equievalant model)/Panasonic(Equivalant model) /ABB(Equivalant model) or equievalant. |
| 144 | Supply and fixing of following rating 240 V Residual Current Breaker with Overcurrent protection (RCBO) having a sensitivity current up to 100mA in the existing MCB DB ISI marked complete with connection testing and commissioning etc as required. (Make-LEGRAND- DX3 DB/ Siemens-Betaguard/ Schneider- Acti 9/L&T (Equievalant model)/Panasonic(Equivalant model) /ABB(Equivalant model) or equievalant.25 to 40 amp rating DP RCBO, 30mA |
| 145 | 32 amp rating FP RCBO, 100/300mA |
| 146 | 63 amp rating FP RCBO, 100/300 mA |
| 147 | Supplyof one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of following sizes of cable as required. (Make- POLYCAB / FINOLEX / HAVELLS) or equievalant reputed ISI MARKED MAKE |
| 148 | 3.5 C x 240 sq.mm Al |
| 149 | 3.5 C x 50 sq.mm Al |
| 150 | Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade ofsize exceeding 25 sq.mm but not exceeding 400 sq.mm in the existing RCC/HUME/STONEWARE/METAL pipe as required. |
| 151 | Laying and fixing of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of size exceeding 25 sq.mm but not exceeding 120 sq.mm on surface as required. |
| 152 | Supplying and making end termination with brass compression gland and aluminum lugs for following size of PVC insulated and PVC sheathed / XLPE aluminum cable of 1.1 KV as required.3.5 C x 300 sq.mm Al |
| 153 | 3.5 C x 240 sq.mm Al |
| 154 | 3.5 C x 50 sq.mm Al |
| 155 | MAIN PANEL with 630A 4P ONLOAD CHANGE OVER & 630A 4P MCCB (36kA) - 1 No ,320A 4P MCCB (36kA) - 2 Nos,100A 4P MCCB (36kA) - 3 Nos, 63A 4P MCB - 3 Nos,40A 4P MCB - 6 Nos, 32A 4P MCB - 6 Nos, 32A 2P MCB- 6 Nos as Outgoing and 3nos 400/5A CT, 0-400A Digital Ammeter and 400A aluminium Bus Bars and 50kA Type-I+II 3P+N SPD with back up MCB -1 set in the Incomer.. |
| 156 | Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc (But wih out charcoal and salt) as required. |
| 157 | Extra for using salt and charcoal for G.I or copper plate earth as required |
| 158 | Providing and fixing 25 mm x 5 mm Copper strip in 40 mm dia G.I. pipe from earth electrode as required. |
| 159 | Supplying and laying 25 mm x 5 mm copper strip on surface or in recess for connection etc as required. |
| 160 | Providing and fixing of lightning conductor finial made of 25mm dia 300 mm long, G.I tube,having single prong at top,with 85mm dia 6 mm thick G.I base plate including holes etc. complete asrequired |
| 161 | Providing and fixing of G.I. tape 20 mm x 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For horizontal run) |
| 162 | Providing and fixing of G.I. tape 20 mm x 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For vertical run) |
| 163 | Providing and fixing of testing joint, made of 20 mm x 3 mm thick G.I. strip, 125 long with 4 nos of G.I. bolts, check nuts and spring washer etc complete as required. |
| 164 | Reveting, sweating and soldering of copper / G.I. tape ( with another copper / G.I. tape, base of the finial or any other metallic object) as required |
| 165 | Providing and laying of G.I. tape 32 mm x 6 mm from earth electrode directly in ground as required. |
| 166 | Earthing with G.I. earth plate 600 mm x 600mm x 6 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc (But wih out charcoal and salt) as required. |
| 167 | Extra for using salt and charcoal for G.I or copper plate earth as required |
| 168 | Supply, Installation, Testing and Commissioning of pre-wired fluorescent fiiting / compact fluorescent fitting /LED fitting of all sizes complete with all accessories and lamp etc. directly on ceiling /wall or recessed in false ceiling , including connection with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor and earthing as required. |
| 169 | Surface/recessed mounted indoor type 12W ROUND LED Luminaire with LED Lamp Similar to WIPRO Cat No. LD90-141-XXX-65-XX or equivalent. |
| 170 | Surface/Recessed mounted indoor type 36W 2\"x2\" Square LED Luminaire with LED Lamp Similar to WIPRO Cat No. CRCO10R036HP57G2 / JAQUAR / Philips / Halonix / Panasonic or equivalent. |
| 171 | Surface mounted indoor type 10W BULK HEADLED Luminaire with LED Lamp Similar to WIPRO Cat No. LW07-141-XXX-57-G1 or equivalent. |
| 172 | Supply , fixing& termination of 30watt LED street light fitting complete with cover, GI pipe bracket, necessary wiring from loop-in-box with 3Cx1.5 sqmm copper wires inside PVC pipes etc complete as required with all materials similar to HAVELLS Cat No. LHEXAYP7PN6K030 or equivalent alent |
| 173 | Supply, Installation, Testing and Commissioning of ceiling fan 1200mm sweep,BEE5starrated,ceilingfanwith Brush Less Direct Current (BLDC) Motor, class of insulation including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated single core multiatrand copper conductor etc. as required. |
| 174 | Supply, Installation, testing and commissioning of exhaust fan of 300 mm sweep 900 rpm in the existing opening, including making the hole to suit the size of the above fan, making good the damage complete, connection, etcas required. |
| 175 | Providing and fixing extra down rod of 50 cm length G.I. pipe 20 mm dia heavy gauge including painting etc as required . ( more than 5 cm lenght shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored |
| 176 | Recessed wiring to television point with clip in type modular television socket ISI markedmounted on G.I modular box with face plate & cover of suitable size , including all accesories and connection as per direction of Engineer in Charge. |
| 177 | Recessed wiring to telephone pointwithclip in type modular telephone socket ISI markedmounted on G.I modular box with face plate & cover of suitable size , including all accesories and connection as per direction of Engineer in Charge. |
| 178 | Recessed wiring to LAN pointwithclip in type modular lan socket (RJ45) ISI markedmounted on G.I modular box with face plate & cover of suitable size , including all accesories and connection as per direction of Engineer in Charge. |
| 179 | Supplying and fixing of 25mm PVC conduit along with accessories in recessed wiring including cutting the wall and making good the same in case of recessed conduit as required. |
| 180 | Supplying and fixing of 16 / 18 SWG metal box of 200 mm x 150 mm x 60 mm deepon surface / recess with suitable size of phenolic laminated sheet cover in front including cutting the wall and making good the same in case of recessed conduit as required. |
| 181 | Supplying and drawing one pair, 0.5 sq.mm FR PVC insulated coper conductor, unarmoured telephone cable in existing surface / recessedPVC conduit as required. |
| 182 | Supply and drawing of TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated shielded with fine tined copper braid & protected with FR PVC sheath inexisting surface / recessed STEEL / PVC conduit as required. |
| 183 | Supplying and drawing UTP 4 pairLAN cat-6 cable in the existing surface / recessed PVC conduit as required. |
| 184 | Supply of DX type Ductable units consists of fixed type scroll compressors,fan motor with heat exchanger, safety,valves,solenoid valves,receiver,capillary tube,check valve, electronic expansion valve, refrigerrant filter, stop valve Units shall be 3 Phase macine capacity 11 TR ductable A.C R-410 A |
| 185 | Supply of DX type Ductable units consists of fixed type scroll compressors,fan motor with heat exchanger, safety,valves,solenoid valves,receiver,capillary tube,check valve, electronic expansion valve, refrigerrant filter, stop valve Units shall be 3 Phase macine capacity 5.5 TR ductable A.C R-410 A |
| 186 | Supply & installation of Copper pipe with 9/13 mm nitrile insulation |
| 187 | Supply & installation of electrical cable from Indoor to Outdoor |
| 188 | Supply & Installation of PVC Drain pipe with insulation |
| 189 | Supply & installation of GI ducting |
| 190 | Supply & installation of thermal insulation(Nitrile) for duct |
| 191 | Supply & installation of acoustic insulation |
| 192 | Supply & installation of Al. Grill with /without VCD |
| 193 | Supply & installation of Canvass connection |
| 194 | Supply & installation of ODU stand |
| 195 | Installation of 11 TR ductable A.C |
| 196 | Installation of 5.5 Tr ductable A.C |
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail