|
| 1 | Excavation for foundation in hard murum including removing the excavated materialuptodistance of 50metres beyond the building area and stacking and spreading asdirected, dewatering, preparing the bed for the foundation and necessary backfilling, ramming, wate ring including shoring and strutting etc .complete. (Liftupto1.50m) By Manual Means |
| 2 | Excavation for foundation in Hard rock by chiselling, wedging, line drilling, etc. including trimming and evelling the bed,removing the excavated material upto a distance of 50 metres beyond the building area stacking as directed, dewatering and back filling with available earth / murum watering, ramming etc.complete. (Liftupto1.5m). By Mechanical Means |
| 3 | Providing and laying Cast in situ / Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer /concrete Batch mix plant (Panmixer) etc.complete.With fine aggregate (Crushed sand VSI Grade) |
| 4 | ProvidingLateritestonemasonryincementmortar1:6in foundation and plinth including racking out joints when plastering is to be done/strikingjoints when no plastering is to be done watering and scaffolding. |
| 5 | Providing and laying Cast in situ/Ready Mix cement concrete M-15 oftrap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded orchamfered as per drawing or as directed including steel centering, plywood / steelformwork compacting ,roughening them if special finish is to be provided, finishinguneven and honeycombed surface and curing etc. complete.The Cement Mortar 1:3plaster is considered for rendering uneven and honeycombed surface only. Newly laidconcrete shall be covered by gunny bag, plastic, tar paulin etc.(Wooden centering will notbe allowed.) With fine aggregate (Crushed sand VSI Grade) |
| 6 | Filling in plinth and floors with approved excavated material in 15cm. to 20cm.Layers including watering and compacting etc. complete. |
| 7 | Providing dry/trap/ granite/ quartzite/ gneiss rubble stone soling 15 cmto 20 cmthick including hand packing and compacting etc. complete. |
| 8 | ProvidingLateritestonemasonryincementmortar1:6in Super structure includingracking out joints whenplastering is tobedone/strikingjointswhenno plasteringistobedone watering and scaffolding. |
| 9 | Providing and fixing frame with / without ventilator of size as specified with Country cutteak wood for doors and windows including chamfering, rounding, rebating,iron holdfastof size 300mm x 40mm x 5mm with oil painting, etc. complete |
| 10 | Providing sills of polished Kadappa stone 25 mm to 30 mm thick, on a bed of 1:4 cement mortar including cement float, filling joints with slurry, curing polishing and cleaning etc. complete. |
| 11 | Providing and fixing Country cut teak wood double or single leaf secondclass fully panelled door shutte with 35 mm thick style and rail with 2 5mm thick panels withopenable fanlight as per detailed drawings.Excluding the door frame 60 mm x 100 mmstainless steel fixtures and fastening and finishing thewoodworkwith oil painting3coats.(Excludingthedoor frame) |
| 12 | Providing and fixing factory made panelled door shutter in single leaf 35 mm thick style and rail without ventilator with CCTW panels 12 mm thick including wrought iron hold fast and stainless steel fixtures with oil painting 3 coats etc. complete. |
| 13 | Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete. |
| 14 | Providing and laying Cast in situ / Ready Mix cement concrete M-20 of trap /granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs anddrawings or as directed including steel centering, formwork, cover blocks,laying/ pumping, compactionand roughening the surface if special finish is to beprovided and curing etc.complete. (Excluding reinforcement and structural steel).with fully automatic micro process or based PLC with SCADA enabled reversible Drum Type mixer / concrete Batchmix plant (Panmixer) etc. complete.With fineaggregate (Crushed sand VSI Grade) |
| 15 | ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-20oftrap/granite/ quartzite/ gneiss metal for R.C.C.slabs andlandingsasper detaileddesigns anddrawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 16 | Providinginternalcementplaster12mm thickinsinglecoatincementmortar1:5with neeru finish to concrete or brick surfaces, in all position including scaffolding and curing etc. complete. |
| 17 | Providinginternalcementplaster12mm thickinsinglecoatincementmortar1:5without neeru finish to concrete or brick surfaces, in all position including scaffolding and curing etc. complete. |
| 18 | Providing and laying matt finish ceramic tiles of having size 30 cm x 30 cm confirming to I.S.15622/2006 (group D II-A) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete. |
| 19 | Providing and laying ceramic tiles of having size 30 cm. x 30 cm. and confirming to corresponding I.S. for dado and skirting in required position with ready made adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. |
| 20 | Providing and fixing in position TMT-FE -500 bar reinforcement of various diametersfor R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies,staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detaileddesigns, drawings andschedules. including cutting,bending,hooking the bars,bindingwith wires or tack welding and supporting as required complete |
| 21 | ProvidingstructuralsteelworkinsinglestanchionscomposedofR.S.J.Channeletc.with caps,bases,mildsteelplated,anglebrackets,cleats,gussetplates,anchorboltsetc.asper detailed designs and drawings or as directed including cutting, fabrication, hoisting, erecting fixing inposition, making riveted/ bolted/ weldedconnectionandone coat of anticorrosive paint and over it two. coats of oil painting approved quality and shade etc. complete. |
| 22 | Providing andfixing colourcoatedZincalume (R)AZ150(min150gms/sq.mt.totalon each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength,metallichotdipcoatedwithAluminium-Zincalloy(55%aluminium 43.4%zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyester paint coat ( with inorganicpigment).Thepaintshallhaveatotalcoatingthicknessofnominal35um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center- to-center.The endribshallbedesignedforanti-capillarygroove.andreturnleg.Thefeed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/ One Square Metre) |
| 23 | Providing and fixing 24 BWG G.I sheet ridge copping for roofing galvanised iron hooks, boits, bitumen washers galvanised iron clamps eic complete. |
| 24 | Providing structural steel work in trusses, other similar trussed purlins and members withallbracing, gusset plates etc. as per detailed designs and drawings or asdirectedincluding cutting, fabricating, hoisting, erecting fixing in position, Making riveted /bolted/ welded connection and one coat of anti corrosive paintand over it 2 coats of oilpainting approved quality and shade etc. complete. |
| 25 | Providing and fixingin position (as per 1868 / 1982)Aluminium sliding window ofthree tracks with rectangular pipe 95 x 38 .10 x 0.90 mm at weight 0.637 Kilogram / One Running Metre.with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 Kilogram / One Running Metre..Topand side track section 92 x 31.75 x 1.30 mm a weight 0.933 Kilogram /Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram /One Running Metre. Inter locking section 40 x18 x1.10 mm at weight 0.469 Kilogram / Running metre. and handle and top section 40 x 18 x 1.25 mm at weight 0.417 Kilogram / Running metre. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon castinging 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screwsand nuts etc,complete.With powder coating without box |
| 26 | Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete. |
| 27 | Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to new plastered surfaces including scaffolding if necessary,cleaning and preparing the surface, watering for two days etc. complete |
| 28 | Providing and fixing Orissa type white glazed earthenware 575 mm water closetpan including Strap with earthen ware footrests,cast iron soil and ventpipe upto outsidefaceof thewall 1:2:4 brickbat lime concrete bedding without flushing tankand itsaccessories etc. complete. |
| 29 | Providing and fixing Stainless Steel sink of 170 x 420 x 178 mm of Nirali or equivalent mark |
| 30 | Providing and fixing white glazed earthen ware Wash Hand Basin of 45 cm x 30 cm size including cold water pillar tap / cold and hot water pillar tap brackets, rubber plugs andbrass chain, stop tap and necessary pipe connection including P.V.C. waste pipe andt rap up to the outside face of the wall. Making good the damaged surface, testing etc. complete. |
| 31 | Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and withnecessaryfixtures and fitting such as bends, tees, single junctions, slottedvent, clamps etc. complete. |
| 32 | Providing and fixing H.D.P container one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet,outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters |
| 33 | Providing, laying and fixingP.V.C. pipe of 15 mm dia. with fittings such as bends, tees, reducers, clamps,etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. |
| 34 | Providing and fixing 15 mm dia. Screw down bib /stop tap of brass including necessary socket union nut complete |
| 35 | Providing and preparing kitchen otta up to 75 cm width,made up from 30 mm thick and 75 cm high vertical support for kadppa at 1 m. c/c of 25 mm thick both side polished kadappa middle shelf and bottom of 20 mm thick one side polished kadappa with facia patti of 20 x 50 mmkadappaincludingallmateriallabourcuttingfixingwithcementmortarandaraldite curing polished and cleaningetc. complete. |
| 36 | Providing and constructing BrickMasonry Inspection Chamber 60cm x 45cm x 90 cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W .pipes ,Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140 Kilogram with frame etc complete. |
| 37 | Providing and fixing N.H . /S.H. Route Marker size 60 cm x 45 cm with one No.directionplate of size 30 cm x 25 cm prepared on 16 gauge M.S.sheet including painting with one coat of zinc cromate stoving primer and two coats each of white and green back groundand back side gray stovee namelled, bonded with cut out of red Retro reflective sheet Engineering grade,border/letters / numerals and arrow, coated with non pealable crystal clear protective transparent coat retaining 100 % reflection including one One Number of M.S.Angle iron post of size 50 x 50x 5 mm of 3.65 m. long in flated at bottom drilled on to pin one piece without joint painted with white and black bands of 30 cm. fixing board and post with 4 Nos .of high strength G.I. bolts and nuts of size 10 mm dia.and 20 mm long including all taxes, conveying, fixinging round with cement concrete 1:4:8 block of 60 cm x 60 cm x 75 cm size as directed by Engineer-in-charge etc.complete. Mild Steel Route Marker with Engineering Grade |
| 38 | Test Reports- Stilt Factor, Sieve Analysis, Compressive strength |
| 39 | Royalty |
