|
| 1 | Item |
| 2 | Excavation for foundation in earth, soils of all types, sand,gravel and soft murum, including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5m to 3.0m) |
| 3 | SEPTIC TANK |
| 4 | Excavation for foundation in earth, soils of all types, sand,gravel and soft murum, including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5m to 3.0m) |
| 5 | ST |
| 6 | Providing preconstructional antitermite treatment as per I.S. 6313 (Part-I) to the soil alongthe external face of building by punching holes of 1.2 of 1.5 C.M. diametre about 30 -60cm deep at 15 cm c/c as close to the wall as possible and to inject 0.5 percent of aldrin or clorophyrifos at the rate of 7.5 litres per hole and sealing the same withproper filling and covering 10 years guarantee on bond paper. |
| 7 | Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) treatmentby treating the backfill in immediate contact with foundation at the rate of 5 litres ofemulsion concentrate of 1.0 percent of clorophyrifos per One Square Metre of verticalsurface area coverin 10 years guarantee on bond paper. |
| 8 | Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 1.0percent of clorophyrifos per One Square Metre of surface area covering ten years guarantee on bond paper. |
| 9 | Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. |
| 10 | Filling in plinth and floors with approved excavated material in 15cm. to 20cm. Layers including watering and compacting etc. complete. |
| 11 | Filling in plinth and floors with contractorsmaterial/brought from outside and approved by Engineer inchargein layers of 15 cmto 20 cm including watering and compaction etc. complete. |
| 12 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete.With natural sand/V.S.I. quality Artificial Sand |
| 13 | ST |
| 14 | Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap /granite/quartzite/ gneiss metal for R.C.C. work in foundations like raft, stripfoundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering, formwork ,cover blocks,aying/pumping,compaction and curing roughening the surface if special finish is to be provided(Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 15 | ST |
| 16 | Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap /granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs anddrawings or as directed including steel centering, formwork, cover blocks,laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 ofsufficient minimum thickness to give a smooth and even surface or roughening if specialfinish is to be provided and curing etc. complete,(Excluding reinforcement and structuralsteel).with fully automatic micro processor based PLC with SCADA enabled reversibleDrum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 17 | Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs anddrawings or as directed including steel centering, formwork, cover blocks,laying/pumping, compactionand roughening the surface if special finish is to be providedand curing etc. complete. (Excluding reinforcement and structural steel).with fullyautomatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) |
| 18 | Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designsand drawings including steel centering, formwork, cover blocks, laying/pumping,compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimumthickness to give a smooth and even surface or roughening if special finish is tobe provided and curing etc. complete,(Excluding reinforcement and structuralsteel).with fully automatic micro processor based PLC with SCADA enabled reversibleDrum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fineaggregate (Crushed sand VSI Grade) |
| 19 | ST |
| 20 | Providing and laying Cast in situ/Ready Mixcement concrete M-25 of trap/ granite/quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings includingsteel centering, formwork, cover blocks, laying/pumping, compacting and roughening thesurface if special finish is to be provided and curing complete. (Excluding reinforcementand structural steel). with fully automatic micro processor based PLC with SCADAenabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc.complete. With fine aggregate (Crushed sand VSI Grade) |
| 21 | Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness includingsteel centering, formwork, cover blocks, laying/pumping, compacting and rougheningthem if special finish is to be provided and curing complete. (Excludingreinforcement and structural steel).with fully automatic micro processor based PLCwith SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Panmixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 22 | ST |
| 23 | Providing and laying Cast in situ/Ready Mix cement concrete M-15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. compleconsidered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) |
| 24 | I Floor |
| 25 | Providing and fixing in position TMT- FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations,slabs, beams columns, canopies, staircase, newels, chajjas,lintels pardis, copings, fins, arches etc. as per detailed designs,drawings and schedules. including cutting, bending, hookingthe bars, binding with wires or tack welding and supporting asrequired complete. |
| 26 | ST |
| 27 | Providing and applying water proofing treatment using acrylic polymer modifiedcement based water proofing coating with fibre glass mesh mixing at the rate ofpowder to liquid (2:1) by weight covering 9 to 10 Square Metre /Kilogram withtwo coat using approved chemicals for masonry and concrete surface by brush covering7 years guarantee on Stamp Papers etc. complete. |
| 28 | Providing fly ash brick masonry with conventional / I.S. type fly ash bricksin C.M. 1:6 in foundation and plinth includingbailing out water manually striking joints, racking out joints watering and scaffolding etc. complete. As director by engineer in charge and BDG- 2 and 5 |
| 29 | Providing fly ash brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. CompleteAs director by engineer incharge and BDG- 2 and 5 |
| 30 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm diameter / 2 hoop iron strips 25 mm X 1.6 mm placedat every third course, properly bent and bonded at ends scaffolding, racking out joints and watering etc. complete. |
| 31 | Providing and fixing in position Gypsum board false ceiling with 12.5 mm thickGypsum boards, screwed/fixed to the under structure of suspended G.I. Gridconstructed and suspended from the main ceiling consisting of ceiling sections of size 25x 50 mm maximum center to center distance of 600 milimetre perimeter channel andintermediate channels at maximum center to center distance 1200 milimetregalvanized grid should be fixed to reinforced cement concrete slab. The gypsum boardshould be fixed to galvanized iron grid with necessary screws. The boards should betaped and filled from underside to give smooth, seamless ceiling. The rate shouldinclude necessary additional ceiling sections and intermediate channels.Additionalintermediate channels should be fixed to strap hangers for additional support to preventstrapping at every 1200 milimetre item to be completed in all respect including necessarysleeves for ducts finishing of joints cut outs, painting including labour, material, lifts etc.all complete. |
| 32 | Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4without neeru finish to concrete or brick surfaces, in all positions including scaffoldingand curing etc. complete. |
| 33 | Providing and applying Texture plaster with finishing with texture material ofapproved make in 3 to 4 millimeter thickness on previously plastered surface,includingPlaster Groove 6mm thickness or Tape Grooves 35 to 45 mm thickness or as required, in all position including preparing the surface, scaffolding etc. complete. |
| 34 | Providing and applying impression 24 carrat Luxury paint of approved make &approved brand Emulsion paint to interior walls and ceilings of approved quality, colourand shade to new surface in two coats, including sub surface prparation by Acrylicputty and Acrylic primer coats including scaffolding, preparing the surface. etc. complete(Low VOC). |
| 35 | Providing and applying two coats ofexterior acraylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface, applying primer coat ,scaffolding if necessary , and watering the surface for two days etc complete. |
| 36 | Providing and laying telephone black / Amba White / Cadburybrown / Ruby red /Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxingetc. On C.M. 1:6 including filling joints with polymer base filler nosing/moulding thesharp edges wherever necessary, curing, etc. complete |
| 37 | Providing and Fixing 30 MM thick BOTH SIDE PRELAMINATED SOLID PANELPVC DOOR SHUTTER consisting of frame made out of M.S tubes of 19 guage thicknessand, size 19 x 19 mm for styles and 15 x15 mm for the top and bottom rails, M.S frameshall have a coat of metel primer of approved make and manufacture. M.S frame shallbe covered with heat mouled PVC \"C\" channel made from 5 mm (+/0.25) thickprelaminated sheet of density 600 Kilogram/cbm ,of size 30mm thickness 70mm widthout of which 50mm shall be flat and 20mm shall be tapered in 45? angle on either sideforming stiles ; and 5 mm thick ,95 mm wide PVC sheet out of which 75 mm shall befalt and 20 mm shall be tapered in 45 on the inner side to form top and bottom rail and115 mm wide PVC sheet out of which 75 mm shall be falt and 20 mm shall be tapered onboth sides to form lock rail.Top,bottom and lock rail shall be provided either side of thepanel. An additional 5 mm (+/0.25) thick PVC strip of 20 mm width is to be stuck on thebottom side of the \" c \" channel prelaminated paneling of 5 mm (+/0.25) thick PVC sheet tobe fitted inside the M.S. frame welded/ sealed to the styles and rails with 5 mm (+/0.25) x30 mm PVC sheet beading on either side and joined together with solvent cementadhesive etc ,10 mm thickness (5 mm (+/0.25) x 2 nos ) 20 mm wide cross PVC sheet asgap insert for the rail and bottom rail. Door to be fixed to frames with 3 nos M.S.powdercoated but hinges of size 100 mm x 25MM x 2mm using 32 mm long steelscrews drilled |
| 38 | Providing and fixing frame with / without ventilator of size as specified with Country cutteak wood for doors and windows including chamfering, rounding, rebating, iron holdfastof size 300mm x 40mm x 5mm with oil painting, etc. complete |
| 39 | Providing and fixing Country cut teak wood double or single leaf panelled shutters, 35mm thick style top and freze rail 95 x 35 thick with lock and bottam rail 195 x 25 mmthick and panels without ventilator as per detailed drawing excluding the doorframe, stainless steel fixtures and fastening and finishing the wood work with oilpainting 3 coats complete |
| 40 | Providing and fixing M40 grade thick vibrated pull cast or similar type concrete frame with chamfer conforming to I.S. 65241983 having 6 mm dia bars 3 Nos. And strips @250 mm c/c and fixing in wall with 6 Nos. of hold fast of 12 mm dia bars 500 mm long including primer and oil painting etc, complete) frame size 60 mm x 125 mm |
| 41 | Solid Core Flush door Single leafProviding and fixing factory made solid core flush door in single lea 35 mm thickdecorative types, of exterior grade, as per detailed drawings, conforming to I.S.:2202 -1962 (Revised) with approved face veneers on both faces with/without glazing andvenetians in the positions shown on the drawings or as directed, all necessary beads,moulding and lipping, holdfasts, mat finish stainless steel fixtures fastenings , finishingwith french-polish/ waxing complete. (without door frame).(Sample to be got approvedfrom Ex.Engineer before use) Commercial Hard Wood shutter |
| 42 | Providing and fixing mild steel grill work for windows, ventilators, etc. 20 Kg / Sqm. as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete. |
| 43 | Providing and fixing in position Mild steel fixed staggered ( Z Type ) Ventilatoras per detailed drawing with hot deep zink coating including fabricating with Mild steel\"Z \"Section of size 20mm x 25 mm and 3 mm thick at weight 1.42 Kilogram/One Running Metre,with stainless steel mosquito net of 304 Grade,4 mm thick float glass ?as directedby Engineer In charge including necessary welding, grinding, two coats of oil paintetc.complete |
| 44 | Providing and fixing of factory made uPVC Sliding window & door (White Colour)complete, comprising uPVC multi-chambered frame having in-built uPVC roller track ontop and uPVC sash with wall thickness of 2.3mm (+-0.2 mm), duly reinforced with G.I.section 1.5 mm, wherever required. uPVC window & door profile shall be made in India& shall conform to BS EN 12608 and other standards as mentioned below: S.No.Name of the test Test Method Specified Parameter1 Tensile Impact Strength ISO 8256 - more than 700Kj/m2 2 VicatSoftening Temperature EN ISO – 306 Shall not be < 750C3 Charpy Impact Strength EN ISO – 179-2 Shall not be < 20KJ/m24 Flexural Modulus Elasticity EN ISO – 178 Shall not be < 2200 N/mm25 Mean Breaking Stress for welded corner(a) For the tensile bending test EN – 514 Shall not be < 25 N/mm2(b) For the compression bending test Shall not be < 30N/mm26 Heat Reversion Test IS:4985-2000 Shall not be > 2.0 %7 Surface Spread of flame BS : 476 - Part 7 Classification 18 Ignitability Evaluation BS : 476 - Part 5 \"P\" Not easily ignitable9 Tensile modulus ASTM D 638 Shall not be < 35 MPa10 Shear Modulus ASTM D 732 Shall not be < 220 MPa11 Tensile Strength EN ISO 527 Shall not be < 30 MPaAll corners of frame and sash will be fusion welded. After placing 5 mm Float Annealedglass in the sash, uPVC glazing bead, interlock, EPDM / TPE gasket, brush shall beprovided including touch lock and rollers & proper drainage system shall be provided.Window / Door will be fixed to the wall with 100mm long and 8mm dia. Fasteners andcomplete in all respect as per direction of Engineer-In-Charge. uPVC Window and DoorProfiles are warranted for a period of ten ( |
| 45 | Providing and Fixing mat finish stainless steel (of 302 grade ) railing with top pipe of 50mm dia. and vertical pipe of 38 mm dia at 0.60 m c/c or as required and horizontal pipesof 25 mm dia in three rows, all pipes of 2 mm thick including buffing,fabricating fixturesand fastening including pipe base of appropriate diameter and ball base of 75 mm diaabove newel post of 75 mm diameter etc. complete (Prior approval of sample andbrand by Ex.Engineer is necessary before use) |
| 46 | Providing and laying vitrified mirror / glossy finish tiles decorative typehaving size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearingetc. complete. a) Flooring |
| 47 | Providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605 mmx 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( groupBla) of approved make, shade and pattern for dado and skirting in required position fixedin 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc.complete |
| 48 | Providing and laying Antiskid Ceramic tiles of approved quality size 30 cm x 30 cmand confirming to IS 15622-2006 (Group-B IIA) for antiskid flooring in required positionlaid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurrycleaning curing etc. complete |
| 49 | Providing and laying in position flooring of telephone black / Amba White / Cat barybrown / Ruby red / Ocean Brown granite stone of approved shade and size 18 mm to 20mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing inC.M. 1:3 curing and cleaning etc. complete. |
| 50 | Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephoneblack / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treadsand risers of steps and staircases of approved colour and shade with full moulding andthree grooved line for the treads on bed of 1:4 Cement mortar including float fillingjoints with neat cement slurry curing polishing and cleaning etc. complete. |
| 51 | Providing and laying cement concrete flooring 50mm thick with M20 cement concretelaid to proper level and slope in alternate bays including compaction, filling joints,marking lines to give the appearance of tiles of 30cm x 30cm or other size laid diagonally/square etc. finishing smooth (with extra cement) in any colour as directed and curing etc.complete.with Crushed sand VSI Grade |
| 52 | Providing and fixing white glazed earthenware Wash Hand Basin of 63cm x 45cmsize including Bib cock stop tap brass heavy 15mm, brackets, rubber plugs and brasschain, stop tap and necessary pipe connection including P.V.C. waste pipe and trap up tothe outside face of the wall |
| 53 | Providing and fixing European type white glazed earthenware coupled closet symphonictrap with symphonic low level white glazed 10 litres cistern with black backliteseat with all necessary pipe connection etc. complete |
| 54 | Providing and fixing H.D.P container one piece moulded water tank made out of highdensity polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet,outlet overflow pipe inclusive of all tankscapacity between 200 to 1000 liters |
| 55 | Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessaryfittings, remaking good the demolished portion etc. complete. Including removing existingpipe line if necessary and conveying and stacking the same in PWD chowky or as directedetc. complete |
| 56 | Providing and fixing on walls/ceiling/floor 20 mm dia. CPVC pipe with necessaryfittings, remaking good the demolished portion etc. complete. Including removing existingpipe line if necessary and conveying and stacking the same in PWD chowky or as directedetc. complete |
| 57 | Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe with necessaryfittings, remaking good the demolished portion etc. complete. Including removing existingpipe line if necessary and conveying and stacking the same in PWD chowky or as directedetc. complete. |
| 58 | Providing and fixing on walls/ ceiling/ floor 32 mm dia. CPVC pipe with necessaryfittings, remaking good the demolished portion etc. complete. Including removing existingpipe line if necessary and conveying and stacking the same in PWD chowky or as directedetc. complete. |
| 59 | Providing and laying in trenches 50 mm dia. medium grade having embossed as ISIMark galvanised iron pipes ?of 5.17 Kilogram/meter necessary fitting remakinggood the demolished portion with filling trenches and with primer of anti-corrosive oilpaint, 2 coats Including removing existing pipe line if necessary and conveying andstacking the same in PWD chowky or as directed etc. complete. |
| 60 | Providing and fixing 15 mm dia. screw down bib/ stop tap of brass including necessarysocket union nut complete. |
| 61 | Providing and fixing 20 mm dia. screw down bib/ stop tap of brass including necessarysocket union nut complete. |
| 62 | Providing and fixing 75 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe andwith necessary fixtures and fitting such as bends, tees, single junctions, slotted vent,clamps etc. complete |
| 63 | Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe andwith necessary fixtures and fitting such as bends, tees, single junctions, slotted vent,clamps etc. complete. |
| 64 | Providing , laying and fixing ,jointing Eco- drain 160 mm SN 4 Nu- Drain Upvc pipes orof equivalent make, manufacture as per EN 13476 or equivalent as per I.S.15328 withfittings such a bends, tees , coupler, etc, jointing with rubber lubricant includingnecessary excavation, trench refilling with selective excavated materialetc. complete. |
| 65 | Providing and fixing 8 cm C.I. Nahani Trap including C.I. grating bend and piece of C.I.pipe upto the outside face of the wall complete |
| 66 | Providing and fixing 15cm x 10cm salt glazed stoneware gully trap in cement concrete1:4:8 outside the building including cast iron grating in the sink, connecting glazedstoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for thegully trap |
| 67 | Providing and fixing White Glazed Earthenware full stall type Urinal with P.V.C.flushing cistern of 5 liters capacity with fitting, inlet pipes and stop tap, brackets for fixingthe cistern, 32 mm dia. P.V.C flush pipe with fittings and flushing arrangement includinglead soil pipe, lead trap, soil pipe connectionup to the outside face of the wall |
| 68 | Providing and fixing 450mm x 550mm size superior type Belgium mirror with 16mmdia. nickel plated towel rod etc. complete. |
| 69 | Providing and fixing Glass self 125 mm wide and 600 mm long with necessary chromium plated brackets providing T.W.gutties etc. complete |
| 70 | Providing and fixing C.P. BIB cock with wall flange of approved make includingnecessary sockets/ union nut etc. complete. |
| 71 | Providing and fixing C.P. pillar cock long neck with aerator of approed makeincluding necessary sockets/union nut etc. complete. |
| 72 | Providing and fixing screw down for 25 mm dia. wheeled stop tap of brassincluding necessary sockets/union nut complete. |
| 73 | Providing and fixing C.P. Angular stop clock with wall flange of approved makecontinental including necessary sockets/union nut etc. complete. |
| 74 | Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channelshalf round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed incement concrete with R.C.C. Cover medium duty 140Kilogramwith frame etc complete. |
| 75 | Providing and constructing Brick Masonry Inspection Chamber 90cm x 45cm x90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channelshalf round G.S.W.pipes, Brick Masonry, plastering from inside and with frame fixed incement concrete with R.C.C. Cover medium duty 140Kilogramwith frame etc complete |
| 76 | Providing and fixing in position UPVC ultra violet stabilized 110 mm outer diametercowl dome confirming to I.S.-4985 including making joints with solvent cement etc.complete |
| 77 | Medium Height Steel Storage @ 750Lx450Dx1200HTProviding and fixing Openable Steel Storage of 750 x 450 x 1200Ht, with 2 adjustableshelves, Complete body & shutter made in 0.8 mm thick & Top in 2 mm thick CRCA, 2Shutter to be mounted with the help of cup hinges, and 4 adjustable levelers, enitre storagein powder coated finish with 60 to 80 microns. with 25 mm. thk. as per drawing. |
| 78 | Full Height Steel Storage @ 750Lx450Dx2100HTProviding and fixing Openable Steel Storage of 750 x 450 x 2100Ht, with 4 adjustableshelves, Complete body & shutter made in 0.8 mm thick & Top in 2 mm thick CRCA, 4Shutter to be mounted with the help of cup hinges, and 4 adjustable levelers, enitre storagein powder coated finish with 60 to 80 microns as as per drawing. |
| 79 | Providing and fixing P.V.C. Rain water pipes of 110mm outer diameter andhaving wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 includingproper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as,offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting25mm to 40mm from face of wall a fixing with clips of approved quality and One Number,filing the joint using rubber gasket with solvent cement and properly resting the shoeof pipes on C.C. or masonry blocks, including necessary scaffolding and maintenancefor 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2piece socket clips shall be got approved from engineer in charge etc. complete |
| 80 | RWH - Recharge PitProviding and constructing recharge pit of 2.0m deep and 1.0m dia of pre-cast RCCrings with 6.5\" dia x 25m deep borewell at the floor of recharge pit includinginstallation of combination of solid/perforated PVC casing pipe wrapped around withetlon mesh including 300mm thick sidefilling around outside of RCC rings (annularspace) with 40mm size boulders including filling of recharge pit up to 0.5m depthwith 25-75mm clean washed gravels from bottom up followed by 0.5m depth of 10-25mm of clean washed stones followed by 0.5m of washed river fine aggregate (naturalsand/crushed sand VSI grade finely washed etc.) including netlon mesh between eachgravel/fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) medialayer including covering with RCC slab, manhole frame & cover, PVC rungs, PVC end caps, fittings etc. including arrangement for inlet & outlet pipe excavation & backfillingas shown in the drawing.The rate shall be inclusive of all labour, material, wastage,scaffolding, transportation, taxes, including all leads, lifts at all levels. All material shouldbe of approved make. All works complete as per the drawing, technicalspecification and direction of the Engineer in charge. |
| 81 | Providing and fixing Orissa type white glazed earthenware 575 mm water closetpan including S trap with earthenware foot rests, cast iron soil and vent pipe upto outsideface of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and itsaccessories etc. complete. |
| 82 | Providing and fixing White Glazed Earthenware Squatting plate (Ladies Urinal) withP.V.C. flushing cistern of 5 liters capacity with fitting, inlet pipes and stop tap, bracketsfor fixing the cistern, 32 mm dia. P.V.C flush pipe with fittings and flushingarrangement i |
| 83 | Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle sectionfitted with sliding bolts and handles for both sides, deep M.S. channel section of depthand thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements,M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar,suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9mm thickness and of any size at top and safety devices including mechanical gearoperation rrangement consisting of worm gear wheels and worms of high grade cast ironor mild steel and one coat of red lead primer etc. complete. (I.S. 62481979) (Withmechanical gear) |
| 84 | Executive\"sTable @ 1800Lx900Dx750HTProviding&Fixing ofTable @1800Lx900Dx750HT-TOP&GABLEENDto bemade of Membrane finish with soft water fall edges & curved panel & Decorated Anodizedsection MODESTYPANEL to be made of 18 mm thick Prelaminated particle board with PVC edge band as per drawing |
| 85 | Providing & Arrangemnt of High Back Chair - TILT MECHANISM WITH MULTILOCKING, HIGH DENSITY CUSHION ON SEAT COMPOSITE LEATHER WITH METALLIC SILVER FINISH BASE AND ARMS WITH P.U.CASTORS GASLIFT FOR HEIGHT ADJUSTMENT. |
| 86 | Full Height Partitions in Glass finish - Providing and Fixing 80mm to 85mm thick Fullheight Double Skin partition up to 3 mtr height with All visible sections in Anodized /Powdercoated finish. Made up of Frames and Tiles. Frame construction In combinaton ofAluminium Rails and Bottom ,Center and Top members, Connected with 2 way RoundShape Post , 3way Post , 4 way Post made up of Aluminium Extruded and Tiles in 5mmthk. Non Toughened Glass on both side. With all the Joints in the partitions covered withPVC extrusions to provide better sound Proofing. Tiles to be separated 55mm from eachother to provide adequate space for drawing cables for electric, data and telephone withproper facility for fixing electrical and data switch plates. as per design and drawing. |
| 87 | Providing and fixing 6 mm thick High Pressure interior compact Laminate made out ofthermosetting resign treated Kraft as core material and design paper as a finish surface.Compact laminates should have the characteristic of flame retardant fulfilled the criteria ofunder BS-476/97 and EN438-6 with classification of BS1D0 standard property, Anti bacterial and anti-termite property under JIS Z2801:2000, Chemical resistance, Scratchresistant ,fire resistance, weather & climatic shock resistance( The manufacturer shouldprovide10 years warranty certification on any manufacturing and moisture relateddefects.)The compact laminates should be resistance to water immersion throughpermissible increase on thickness and mass <0.60% and board should have density>1.35kg/cm3 and fulfilled the criteria of FSCand Green Guard Gold certification andmanufactured under EN438-2&3:2005 standard . Finish and colour of compact laminatesshould be finalised under direction of Engineer –in-charge. including fixing Compact laminates on 25x50 mm aluminium tube or approved tube size at 600 mm c/c under desirable height and fixed through same compact colour rievts or compact adhesive as perrecommended by compact supplied agency. Finish and colour of Interior clade should beapproved under engineer-in-charge direction |
| 88 | Providing internal cement plaster 20mm thick in a single coat usingReady to use wall plasterto concrete, brick surfaces in all positions including scaffolding and curing. Providing groove at joint of B.B.Masonry and concrete members complete.b) cement mortar 1:4 With Prior Approval of Concerned S.E. |
| 89 | Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:4 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete.Bd.L.1 Page No. 367 |
| 90 | Yield Testing of borewells using90\" \"V\" Notch by air lift method for two hours for successful borewell as per yielidng Borewell and installation. Yield testing of Borewell using 80\"V\" |
| 91 | Driling of 150mm diameter Inwell vertical bore including removing the excavated material upto a distance of 50 metres, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. |
| 92 | Providing casing pipe welded threaded joints medium class ERW Mild Steel block as per ISI 1239 specifications with socket and inserting in Tube well through over burden including transportation to site cutting threading & grouting the sand with cement slurry including in the cost of the coupling and plugs of 4.8mm thick etc. complete 150mm dia perforated. providing casing pipe welded threaded joints. |
| 93 | Providingandlayingintrenches80mmdia.heavygradehavingembossedasISI Mark galvanised iron pipes of 10.15 Kilogram/metre necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint , 2 coats complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. |
| 94 | Providing , Laying and lowering double flange sluice valve confirming for IS-2906/14846 including worn gear arrangements as per test pressure stainless steel spindle,caps including all taxes transportation etc.complete.80mm Sluice Valve PN-1 without bye pass arangement |
| 95 | Providing and supplying ISI mark CI D/F reflux valves (non-return valves) of following dia.including all taxes (Central and Local),railway freight,inspection charges unloading from railway wagon,loading into truck,transportation upto departmental stores/site, unloading, stacking etc.complete.reflux valves as per I.S.5312 Part I(1984) iii) 80mm |
| 96 | Providing and laying in trenches 20 mm dai. CPVC pipe including necessary excavation,fittings.Refillingtrenchesetc.complete.Includingremovingexistingpipe line ifnecessary and conveying and stacking the same in PWD chowky or as directed etc. complete. |
| 97 | Providing and laying in trenches 25 mm dai. CPVC pipe including necessary excavation,fittings.Refillingtrenchesetc.complete.Includingremovingexistingpipe line ifnecessary and conveying and stacking the same in PWD chowky or as directed etc.complete. |
| 98 | Providing and laying in trenches 32 mm dai. CPVC pipe including necessary excavation,fittings.Refillingtrenchesetc.complete.Includingremovingexistingpipe line ifnecessary and conveying and stacking the same in PWD chowky or as directed etc. complete. |
| 99 | Providing and fixing 25 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete. |
