Work of putting shade at the back of house number-23 type-5 located in Raj Bhavan colony, installation of endura tiles on the veranda and entrance door behind the house, renovation of the kitchen, placing two water tanks of the house on the roof, doing false ceiling in one room and shade of the house and work of installing a window and door in the house and replacing the Shatigrast tiles in two rooms of the house, any other renovation work - Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar DSR NO-(15.7.4) 2 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm DAR NO-15.23.1 3 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in dark colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. (size of tiles 1200X600mm)(Almaze Brown Dcsf Re , Almaze Ruby Dcsf Re)(Johnson ). 4 Providing and fliling Apoxy rezen in tiles gaps 3 mm including Cost of spresar pointing the joints matching pigments etc complete. 5 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete.(dar-11.38) ( size of tile 300x300mm ) 6 Providing and fixing 1st quality ceramic, glazed wall tiles conforming to IS 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green black of any size as approved by Engineer-in-charge, in skirting, risers of steps and dados, over 12 mm thck bed of cmeent mortar 1:3 ( 1 cement 3 coarse sand) and jointing with grey cmeent slurry @ 3.3 kg per sqm, including pointign in white cement mixed with pigment of matching shade complete.DAR NO-8.31 450x300 7 Providing and fixing ofkitchen shelves/cabinet with basket, shutter is made by mica laminated 18mmboard and back side of box is made by 6 mm Ply . Length and width of cabinet is 50cm and depth/height of cabinet is 65cm including cost of all accessories such as handle, hinges, lock, rolling channel, basket, catcher etc complete work. 8 Providing and fixing ofkitchen shelves/cabinet with shutter is made by mica laminated 18mmboard and back side of box is made by 6 mm Ply . Length and width of cabinet is 50 cm and depth/height of cabinet is 75 cm including cost of all accessories such as handle, hinges,catcher etc complete work. 9 Providing and fixing of wooden Almirah Frame Work with mica laminated 19 mm ply board out side with one side decorative lamination . including cost of all acessories such as SS handle, hinges, lock, rolling channel etc complete work. 10 Providing and layingEndura floor tiles in(400x400)sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming toapproved make, in dark colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. ) (bell/kajaria/somany/ jonhson) 11 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.DAR No-10.2 12 Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.1.00 mm thick with zinc coating not less than 275 gm/m² DAR NO-12.1.1 13 Providing wood work in frame of door , window , clerestory windows and other frames , wrought framed and fixed in position with hold fast lugs orwith dash fastener of requried dia & length (hold fast lugs or dash shalle be paid for separately).(dar-9.1.1) 14 Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge(14.2.1) door 15 Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge(window) DAR-14.2.2 16 Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts , nuts and wooden plugs and embedding in cement concrete block 300X150X100 mm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 grade stone aggregate 20 mm nominal size (dar-9.53) 17 Providing & fixing float glass panes :(5.00 mm thick glass panes ) dar - 9.7.2.2) 18 Providing and Fixing white designedtiles of size 595x595 mm, and 8 mm thick made of fiber cement board in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main T runner suitably spaced at joints to get required length and of size 15x38 mm made from 0.30 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross T of size 15x38 mm made out of 0.30 mm (Minimum) sheet, 1200 mm long spaced between mainT at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross Tof length 600 mm and size 15 x38 mm made of 0.30 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x19X3000 mm made of 0.27 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and layingof approved texture (Spintone / Cosmos/ hexa) in the grid, including, cutting/ making opening for services like diffusers, grills,light fittings, fixtures, smoke detectors etc., wherever required. Main T runners to be suspended from ceiling using Vertical Hanger fixed to ceiling with Anchor fastenerM6, 2.68 mm G.I. adjustable rods with galvanised steel level clips, spaced at 1200 mm centre to centre along main T, bottom exposed with 24 mm of all T-sections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by engineer-in-charge. 19 Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required lengthwith nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, includingfixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer’s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification anddirection of the Engineer in Charge but excluding the cost of painting with 12.5 mm thick tapered edge gypsum moisture resistant board DAR NO-12.45.3 20 Providingand applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. Onecoatofself-primingofelastomericwaterproofingliquid(dilution withwaterintheratioof3:1)andtwocoatsofundilutedelastomeric waterproofingliquid(dryfilmthicknessofcompleteapplication/system notlessthan500microns).Theoperationshallbecarriedoutafter scrappingandproperlycleaningthesurfacetoremovelooseparticles with wire brushes, complete in all respect as per the direction of Engineer- in-Charge. DAR NO-22.22A 21 Providing and fixing 20mm diachlorinated polyvinyl chloride (cpvp )pipes , having thermal stability for hot & cold water supply including the supply with clamps at 1.00m spacing . This includes jointing of pipe and fiting with one step salvent cement and testing of joints complete as per direction of Engineer in charge -Internal work - Exposed on wall (dar-18.7.2) 22 Providing and fixing PVC pipes (6kg/sqcm) for sewer line including all fitting including trenching refilling & testing of joints complete as per direction of Engineer in charge110 mm dia . 23 Providing and layeing in position cement concrete of specified grade excluding the cost of centering and shuttering All work up to plinth level:1:2:4 (1 cement :2 coasre sand ( Zone-III) :4 graded stone aggregate 20 mm nominal size (4.1.3) 24 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area beyond 3 sq. metres DAR NO-15.12.2 25 Provding and fixing ISI marked flush door shutters conforming to IS : 2202 (part-1) non- decorative type, core of block board contruction with frame of 1st class hard wood and well matched commercial 3 ply veneers on both faces of shutter:30mm thick including isi marked stainless steelbutt hinges with necessary --9.21.2 26 Brick work with common burnt clay (non madular) brick of class- 150 in superstructure above plinth level up to floor V level in all shape and sizes in cement mortar 1:4 ::(1 cement :4 coarse sand )( Dar 6.4.1) 27 12 MM cement plasterof mix ;1:4 ( 1 cement :4 coarse sand ) )DAR NO-13.4.1 28 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.(D.S.R Item-13.80) 29 Finishing walls with Acrylic premiumSmooth exterior paint with Silicon additives of required shade: New work ( Two or more coats applied @ 1.43ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) (apex Ultima, weather coat All guard) asian, berger. ( D.S.R Item 13.47.1 ) 30 Repair floor tiles with laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. ) 31 Providing and fixing CP Brass Single lever Sink mixer L&K or Equivalent make as approved by Engineer in charge. 15 mm nominal dia 32 Providing and fixing CP Brass Single lever Sink Cock L&K or Equivalent make as approved by Engineer in charge. 15 mm nominal dia 33 Providing and fixing C.P. brass angle valve l&Kfor basin mixer and geyser points of approved quality 15 mm nominal bore. 34 Supply and Fixing C.P. brass bib cock 15mm. dia. Short body L&K 0057 including supply of all materials, labour, T&P etc. required for proper completion of the work. 35 Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubberplug,40mmC.P.brasswastecomplete,includingpaintingthe fittings and brackets, cutting and making good the walls wherever required: White glazed fire clay kitchen sink of size 600x450x 250 mm 36 Providing and placing on terrace (at all floor levels )polyethlene water storage tank . IS:12701 marked , with cover and suitable locking arrangement and making necessary holes or inlet , outlet and overflow pipes but without fitings and the base support for tank (Dar-18.48) 37 Cartageof surplus earth /malbaloading and unloading but excluding stackings on pucca roads up to 15 km (S.L 231(a)-15
