Tender For Construction Of Fire Station At Jalipool, Pakyong District, Sikkim., Pakyong-Sikkim

TDR : 46591963

Tender Notice
BOQ

Expired

Pakyong , Sikkim

Tender Brief : Tender For Construction Of Fire Station At Jalipool, Pakyong District, Sikkim.

Document Fees
₹ 50000 /-

EMD
₹ 641015.0 /-

Tender Value
₹ 2.56 Crore /-

Submission Date
07-01-2025

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	MAIN BUILDING
2	Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
3	Providing and laying hand packed stone soling in buildings works with clean hard selected stones, all complete.
4	Providing and Laying in position cement concrete of specified grade including compacting curing etc all complete.1:3:6 mix. (1 cement, 3 coarse sand, 6 stone aggregate of 20mm & down size)
5	Providing and Laying Plum concrete in 1:2:4 c.c. (1cement, 2coarse sand, 4clean hard graded stone chips of 20 mm down nominal gauge) with 70% cleanhard stone of sizes not exceeding 15cm including shuttering, compacting and curing complete, as per the direction ofEngineer in Charge.
6	Filling with available excavated earth in trenches, plinth and side of foundation in building works with layers not exceeding 20cm in depth including consolidation of each layer by ramming, watering etc, all complete.
7	Stone filling
8	Mixed filling
9	Providing and Laying damp proof course 40 mm thick with cement concrete 1:2:4 ( 1 cement, 2 Clean course sand, 4 graded stone aggregate 12.5 mm nominal size) with Recron 3S of fiber length6 or 12 mm (125 gm of recron 3S per a bag of cement) as per the direction in Engineer in Charge.
10	Providing and Laying in position 1:1.5:3 Mix (1cement, 1.5 coarse sand 3 graded stone aggregate 20mm and down nominal gauge)specified grade of reinforced cement concrete excluding the cost of form work, finishing and reinforcements.
11	Supplying, bending and placing in position tor steel reinforcement in all R.C.C works including cost of binding wires, all complete.
12	Providing, fixing & removing form work for casting R.C.C items as indicated below: with imported timber from outside the state)
13	Foundation, footings, base of column etc for mass concrete.
14	Beam, lintels, girders, brersumers and cantilevers.
15	Floor slab, roof slab, landing, balcony and access platform.
16	Square columns
17	Providing and Laying first class brick work in one brick thick in superstructureof standard size bricks with 1:5 cement mortar (1cement and 5 clean coarse sand) as per the direction of Engineer in Charge includingcuring etc all complete.
18	Providing and Laying first class brick work in half brick thick in superstructure of standard size bricks with 1:4 cement mortar (1 cement and 4 coarse sand) as per the direction of Engineer in Charge includingcuring etc all complete.
19	Providing hold fast of (40x5)mm flat iron including fixing to frame with 10mm dia. Bolts nuts and timber plugs and embedding in CC 1:3:6 ( 1 cement, 3 coarse sand, 6 graded stone aggregate 2omm nominal size) block of size (30x10x15)cm. as per the direction of Engineer - in- Chargeall complete:
20	Providing, fitting and fixing of dressed sal timberin all types of frames complete. With imported timber from outside the state.
21	Providing fitting and fixing in position of fully paneled shutters in windows and doors of champ timber or equivalent includingsteel butt hinges screws 12mm thick panels etc complete. 32mmthick panel door
22	Providing fitting and fixing water proof flush doors shutters, solid block hard core construction with frame of 1st class hard timber, with well matched 3mm commercial ply (both faces) including hinges with screws complete.
23	P/F/F in position of fully glazed shutters in windows and doors of champ wood or equivalent including steel butt hinges, screws, 3mm glass panes of modi guard or equivalent etc complete. 32mm
24	Providing and fixing M.S grills in timber frames of windows with M.S flats with nuts, bolts, and smooth finishing of welded joints/surface with Grills weighing8.00Kg/sqm as per the direction of Engineer - in- Chargeall complete
25	Providing, fitting and fixing. sliding door bolts with nuts and screws etc. complete.(Size 300x16mm)Brass (Chromium Plated)
26	Providing and fixing Tower bolt 200x100mm with necessary screws etc complete.Brass (Chromium Plated)
27	Providing, fitting and fixing. handles 125mm size with necessary screws etc complete.Brass (Chromium Plated)
28	Providing and fixing of 12mm thick and 100mm wide pelmets with (25mm dia.) curtain\" rods and brackets including fixing with (25x3)mm M.S flat 10cm long and plugs etc. completein champ timber or equivalent with necessary screws/nails. .
29	Providing and Laying 15mm thick cement plaster of specified mix in single coat including finishing even and smooth and curing etc all complete.(1:4 mix. )
30	Providing and laying plaster of paris putty of 2mm thick over plastered surface to prepare the surface even and smooth all complete:
31	Providing and washing with three or more coats of snowcem, durocem, cemcoate etc. of approved quality and manufacture on exterior walls to give an even shade including preparation of surface on New surface complete.
32	Providing and Laying white or colored glazed vitrified tiles Pearl (white, marvel Atlanta, jet black etc or equivalent) in flooring, treads of steps landing etc laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry.
33	Providing and Laying flooring with granite marble stone slabs 20mm thick granite stone slabs flooring of size not less than 1.0 sqm of20mm thick laidover 20mm(average)1:4cm thick bare laid cement concrete and joint treated with white cement, mixed with matching pigment, curing including rubbing to give a granite finish, as per the direction of Engineer in Charge and carriage of material up to work site, all complete.
34	Providing and Laying Chequerstiles in on flooring over 12mm thick cement plaster (1cement, 3coarsed sand) 1:3 bare and jointed with white cement slurry.
35	Stone tile 8mm thick (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement complete. Granite of any colour and shade
36	Providing and Laying white or colored glazed tilesanti skid ( elegant, cashmere, Egyptian rustic, celebrity, lara etc or equivalent) of glossy series or celebrity, elegant or equivalentin flooring, treads of steps landing etc of size 300mm x 300mm laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry.
37	Providing and Laying white or colored or ceramic glazed tiles of size 200mm x 300mm Special colour(black, burgundy, pink, midnight blue, alpine blueor equivalent) in skirting, risers of steps and Dados on 12mm thick cement plaster (1cement, 3coarsed sand) 1:3 bare and jointed with white cement slurry.
38	Providing & fixing in position high density fiber laminated wooden flooring with planks of sizes 8mm thick, 1202mm length (minimum) and 192 mm wide(minimum), in approved colour, texture and finish, having Performance Appraisal Certificate (PAC) conforming to EN 13329 standard issued by Manufacturer. The flooring shall be fixed with tongue and groove interlocking system, with underlayment of 4mm thick expanded poly ethylene foam sheets having density 40kg/m3,over prepared surface with necessary door reducer of size 2286mm x 45mm x 12 mm, wherever required. The wood planks shall have minimum density of 850 Kg/cum with Eco friendly UV coating, all complete as per direction of the Engineer in-charge. A4 grade
39	Providing, fitting and fixing 25 mm thick false ceiling/ paneling of dhupi or local timber intimber frames of timber equivalent to Katus or pakhs saaj or equivalent excluding the cost of polishing and including cost of one coat priming onunexposed frame. With locally available timber.
40	Providing,fitting and fixing mild steel railing complete as per drawing and Technical Specification
41	Providing box drain of 30 cm (ht) x 45 cm (width) internal dimension with 1:2:4 Plum concrete (20mm & down) inside walls thickness of 23 cm (hill side) and 30 cm (road side)and 1:3:6 (20 mm & down) base concrete of thickness of 15 cmwith standard specification over 15 cm stone soling including providing & laying guard stones complete, as per thedirection of theEngineer in Charge.
42	Supplying, fabricating, fitting and fixing steel tubular trusses including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shape washer etc as per the standard specification and design and direction of Engineer - in- Charge all complete.
43	Providing, fitting, fixing of 24 BWG Pre-painted HULASsheet roofing with lapping of 150mm (two corrugation)with G.I. hooks, bolts and nut 8mm dia with bitumen, GI limpet washers filled with white bad including carriage all complete
44	Providing, fitting, fixing of 24 BWGGP sheet roofing by making corrugation of50mmx50mm x50mm on bothside with G.I. hooks, bolts and nut 8mm dia with bitumen, GI limpet washers filled with white bad including coat of approved steel primer and two coats of approved paint, on overlapping of sheet excluding carriage all complete.
45	Providing fitting fixing ridges or hips of 60cm overall width of plain 24 BWG Pre-painted HULASSheet fixed with G.I, J or L hooks bolts and nuts 8mm dia Limpets, Bitumen washers complete.
46	Providing fitting and fixing 16mm thick valley of 90cm overall width in plain G.P sheet class I fixed with GI J or L hooks, bolts and nuts 8mm dia GI limpet and bitumen washers complete.
47	Providing and fixing 15cm wide 45cm overall semicircular Pre-painted HULAS. sheet (Class I) gutter with iron brackets 40x3mm size, bolts, nuts, washers etc including making, connection with rain water pipes all complete.
48	Providing fitting and fixing 30cm deep 24BWG GP sheet eaves board including (50x25mm) dressed sal timber beading and M.S. rod brackets complete
49	PVC ceiling board with different size and pattern as approved by the Engineer- in-charge and as per manufacturer\"s specification.
50	Providing, fitting and fixing in position collapsible steel shutterwith vertical channel (20x10x2)mm and braced with flat iron diagonals (20 x 5)mm size with top and bottom rail of T-iron (40x40x6)mm with 40mm dia steel pulley complete with bolts, nuts, locking arrangements, stoppers and handles including applying of priming coat of approved steel primer as per the direction of Engineer - in- Chargeall complete:
51	Providing and Providing and painting with plastic Emulsion paints two or more coats on New surface of required shade to give an even shade including brushing the surface clean of all dirt dust and smoothened by sand paper etc complete.
52	Providing and applying priming coat with ready mixed Red oxide, Zinc chromate primer on steel / galvanizedIron steel works including preparation of the surface complete.
53	Providing and painting with ready mixedpaint of approved quality and shade with two or more coats to give an even and smooth shade including clearing the surface complete on new surface.
54	Providing and French spirit polishes two or more coats including cleaning of the surface of dirt and dust papered smooth etc on new surface complete.
55	Providing Sikkimess style design arround windows and external walls.
56	provision for providing water tank stand ( 5 nos mild steel frame)
57	Carriage of stock materials 10 km Surface road (see Th. Consumption)
58	Loading and Unloading of Cement or Steel by Manual Means and Stacking.
59	Carriage of sand 50 km surface road.
60	Carriage of stone chips 40 km surface road.(see Th. Consumption)
61	Loading and Unloading of Stone Boulder/Stone aggregates/Sand/Kanker/Moorum.
62	INTERNAL WATER SUPPLY AND SANITATION & SEPTIC TANK
63	INTERNAL WATER SUPPLY AND SANITATION
64	Providing, fitting and fixing soil waste and vent pipes including testing etc complete. 100 mm dia. Pipe and fittings
65	100 mm dia. PRINCE / SUPREME soil Pipe
66	Rain water pipe
67	100 mm dia. PRINCE / SUPREME soil Pipe
68	75 mm dia. PRINCE / SUPREME soil Pipe
69	Providing, fitting and fixing. bends of various types plain or a band with access door, insertion rubber washer 3mm thick bolts and nuts complete SCI or centrifugally cost spun sands pipes.
70	Providing, fitting and fixing double equal junction of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete.
71	Providing, fitting and fixing. off sets for sand cast Iron/CI spun (Sands) for 50mm, 75mm, 100mm pipes.
72	Providing, Fitting and fixing PVC 32mm dia pipe complete with GI fittings and clamps including cuttings and making good the walls etc.on wallfor wash basin connector to main line
73	Providing, Fitting and fixing GI pipe of medium class, (excluding trenching, refilling, compactingandthe cost of fittings) all complete. 25mm
74	ProvidingandfixingChlorinatedPolyvinylChloride(CPVC)pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
75	Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: (ESCO / EQUIVALENT
76	BIB COCK15 MM DIA
77	STOP COCK 15 MM DIA (CONCEALED )
78	ANGULAR STOP COCK15 MM DIA
79	SHOWER ROSE WITH ARM
80	BASIN MIXTURE
81	CONNECTING PIPE
82	HEALTH FAUCET (MARKET RATE)
83	Providing and placing on terrace high density polyethylene water storage tank with man hole lid and suitable locking arrangement including making holes for inlet, out let and ball cock including testing etc. all complete: (Sinter or equivalent
84	Providing, Fitting and fixing ball valve ( Brass) of approved quality complete with high or low pressure with plastic floats:
85	Providing, fitting and fixing white vitreous china pedestal (European type) water closet (W.C) pan with seat and lid, with C.P. brass hinges, 10ltr low level cistern with fittings and brackets 40mm flush bend, 20mm overflow pipe with specials, including Providing and painting and making good the wall and floors as required all complete: W.C. pan European One pice (Ivory) CAT NO 92008
86	Providing, fitting and fixing. white vitreous china water closet (W.C) squatting pan (Indian type) 580mm size with 100mm SCI (Sand cast iron) P or Strap, 10 ltr low level flushing cistern with fittings, CI brackets, 32mm flush pipe with fittings and clamps, 20mm overflow pipe, cutting and making good the wall and floor etc complete. Long type or Orrisa type pan. Orissa Pan 58x44 (Box rim) Special CAT NO 20004
87	Providing, fitting and fixing white vitreous china flat back or wall corner type lipped front urinal basin of size 440x315x325 mm with 5 ltrautomatic flushing cistern with C.I. brackets, GI flush pipe and spreaders with brass unions and G.I. clamps including cutting and making good the walls and floors as required all complete:
88	Providing, fitting and fixing. white vitreous china wash angle back basin with CI brackets, painted, 15mm CP brass pillar taps, CP brass chain with rubber plug, 32mm CP brass waste pipe, lead or PVC connection 32mm dia CP \"brass cap and unions, brass stop cock, complete including cutting and making good the walls wherever required.
89	P/F stain less steelkitchen sink with CI brackets, CP brass chain with rubber plug 40mm CP brass waste, CP brass tap etc complete i/c the fittings, cuttings and making good the wall wherever required.
90	Providing and fitting chromium plated toilet paper holder including the making holes and fixed to timber cleats with CP screws washer etc. all complete:.
91	Providing, fitting and fixingBeveled gauge mirror of superior glass with 6mm A.C. sheets ground and fixed to timber cleats with CP screws, washer etc complete.
92	Providing, fitting and fixing. of chromium plated soap dish with necessary screw etc all complete.
93	Providing, fitting and fixing towel rail of chromium plated brass complete with brackets fixed to the timber cleats, CP brass screws complete.
94	SEPTIC TANK
95	Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
96	Providing and laying hand packed stone soling in buildings works with clean hard selected stones, all complete.
97	Providing and Laying in position cement concrete of specified grade including compacting curing etc all complete.1:3:6 mix. (1 cement, 3 coarse sand, 6 stone aggregate of 20mm & down size)
98	Providing and Laying in position 1:1.5:3 Mix (1cement, 1.5 coarse sand 3 graded stone aggregate 20mm and down nominal gauge)specified grade of reinforced cement concrete excluding the cost of form work, finishing and reinforcements.
99	Supplying, bending and placing in position tor steel reinforcement in all R.C.C works including cost of binding wires, all complete.
100	Providing, fixing & removing form work for casting R.C.C items as indicated below: with imported timber from outside the state)
101	Wall
102	Floor slab, roof slab, landing, balcony and access platform.
103	Providing, fitting and fixing soil waste and vent pipes including testing etc complete. PRINCE / SUPREME 100 mm dia.
104	Bend
105	Equal Junction
106	Offset 100mm
107	Carriage of stock materials 10 km Surface road
108	Loading and Unloading of Cement or Steel by Manual Means and Stacking.
109	Carriage of sand 50 km surface road.
110	Carriage of stone chips 50 km surface road.
111	Loading and Unloading of Stone Boulder/Stone aggregates/Sand/Kanker/Moorum.
112	40KL WATER TANK
113	Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
114	Haulage for throwing away of excavated earth via Surfaced Road for the distance of 10 km excluding loading and unloading all complete.
115	Providing and laying hand packed stone soling in buildings works with clean hard selected stones, all complete.
116	Providing and Laying in position cement concrete of specified grade including compacting curing etc all complete.1:2:4 mix.(1 cement, 2 coarse sand, 4 graded stone aggregate of 20mm & down size)
117	Providing and Laying in position 1:1.5:3 Mix (1cement, 1.5 coarse sand 3 graded stone aggregate 20mm and down nominal gauge)specified grade of reinforced cement concrete excluding the cost of form work, finishing and reinforcements.
118	Supplying, bending and placing in position tor steel reinforcement in all R.C.C works including cost of binding wires, all complete.
119	Providing, fixing & removing form work for casting R.C.C items as indicated below: with imported timber from outside the state)
120	Foundation, footings, base of column etc for mass concrete.
121	Wall
122	Floor slab, roof slab, landing, balcony and access platform.
123	Providing and Laying 15mm thick cement plaster of specified mix in single coat including finishing even and smooth and curing etc all complete.(1:4 mix. )
124	Providing and fixing M.S grills in timber frames of windows with M.S flats with nuts, bolts, and smooth finishing of welded joints/surface with Grills weighing8.00Kg/sqm as per the direction of Engineer - in- Chargeall complete
125	Providing and Laying40 mm thick 1:2:4 c.c. (1cement, 2coarse sand,4stone aggregate of size 12.5mm and down )flooring withfloating coat of neat cement to give a smooth surface in not exceeding 02 sqm. (without glass strip) curing etc complete in all building floors wherever specified.
126	Providing, Fitting and fixing brass fittings of approved quality and size complete: GATE WAY VALVE32MM DIA
127	Providing, Fitting and fixing GI pipe of medium class, (excluding trenching, refilling, compactingandthe cost of fittings) all complete. 50mm
128	Carriage of stock materials 10 km Surface road
129	Loading and Unloading of Cement or Steel by Manual Means and Stacking.
130	Carriage of sand 50 km surface road
131	Carriage of stone chips 40 km surface road.
132	Loading and Unloading of Stone Boulder/Stone aggregates/Sand/Kanker/Moorum.
133	INTERNAL ELECTRIFICATION
134	SECTION A : WIRING
135	Wiring for light/Fan/Call bell & 6 A plug point with 2x1.5 sqmmFRLSHPVC insulated copper conductor single core cable in best quality recessed alkathine pipe and earthing the point with 1x 1.5 sqmmHR FRLS PVC insulated copper conductor single core cable as required.
136	Wiring for 16 A plug point with 2x 2.5 sqmmFRLSH PVC insulated copper conductor single core cable in best quality recessed alkathine pipeand earthing the point with 1x 2.5 sqmmFRLSH PVC insulated copper conductor single core cable as required.
137	Wiring for sub-main for light/fan/call bell & 6 amps plug points with 2x 2.5 sqmmFRLSH PVC insulated copper conductor single core cable in best quality recessed alkathine pipe and earthing the point with 1x2.5 sqmm FRLSH PVC insulated copper conductor single core cable as required.
138	Wiring for sub-main for 16 amps (2x1000W) plug points with 2x4.0 sqmm FRLSHPVC insulated copper conductor single core cable in best quality recessed alkathine pipeand earthing the point with 1x4.0 sqmm FRLSH PVC insulated copper conductor single core cable as required.
139	Wiring for sub-mainwith2x 6.0 sqmm FRLSHPVC insulated copper conductor single core cable in best quality recessed alkathine pipeand earthing the point with1x 6.0 sqmmFRLSH PVC insulated copper conductor single core cable as required.
140	Wiring for sub-mainwith2x 10 sqmm FRLSHPVC insulated copper conductor single core cable in best quality recessed alkathine pipeand earthing the point with1x 10 sqmmFRLSH PVC insulated copper conductor single core cable as required.
141	Supplying & fixing Conduit inspection bend 1/2\",3/4\"1\"
142	Supplying & fixing Conduit inspection Tee 1/2\",3/4\" & 1\"
143	Supplying & fixing Conduit inspection round 1/2\",3/4\" & 1\"
144	Supplying & fixing M.S. Box as junction purpose 200mm x 150mm
145	Supplying & fixing Bakelite sheet 125mm x 175mm
146	GST @ 5%
147	Contingency @ 0.5%
148	SWITCH SOCKET AND ACCESSORIES
149	Supplying & fixing 06 amps 1 way FT switch on white moduler plate and metal flux box including connection etc. as required.
150	1 no. 06 amps FT switch with 1 no white 1 moduler plate and 1 moduler metal flux box.
151	2 no. 06 amps FT switch with 1 no white 2 moduler plate and 2 moduler metal flux box.
152	3 no. 06 amps FT switch with 1 no white 3 moduler plate and 3 moduler metal flux box.
153	4 no. 06 amps FT switch with 1 no white 4 moduler plate and 4 moduler metal flux box.
154	6 no. 06 amps FT switch with 1 no white 6 moduler plate and 6 moduler metal flux box.
155	8 no. 06 amps FT switch with 1 no white 8 moduler plate and 8 moduler metal flux box.
156	Supplying & fixing 1 no. 16 amps socket, & 16 amps switch,white plate (4 module) & Metal flux box (4 module)includingconnection etc. as required.
157	Supplying & fixing 1 no. 06 amps socket with 1no. 06 amps switch, 1 no. 3 module white plate & 1 no. 3 module metal flux box ) including connection etc. as required.
158	Supplying & fixing 1 no. 2 way switch with 1 no 1module white plate & 1 no 1 module metal flux box including connection etc. as required.
159	Supplying & fixing 1 no. fan step regulator 120 watts, 1 no. white plate (2 module) and 1 no. (2 module) metal flux box including connection etc. as required.
160	GST @ 5%
161	Contingency @ 0.5%
162	LIGHT FITTING AND ACCESSORIES
163	Supplying & fixing LEDtube light fitting 22 watts 4 ftincluding connection etc. as required..
164	Supplying & fixing surface LED fitting 15 wattsincluding connection etc. as required.
165	Supplying & fixing surface LED fitting 12 wattsincluding connection etc. as required.
166	Supplying & fixing Angle/Batten holder with 9 watts LED lampincluding connection etc. as required.
167	Supplying & fixing LED wall mounting mirror light including connection etc. as required.
168	Supplying & fixing Calling bell (Ding-Dong) with 100mm x 150mmsunmicabox including connection etc. as required.
169	Supplying, Installation, testing & commissioning of ventilating fan 250mmincluding connection as required.
170	Supplying, Installation, testing & commissioning ofCeiling Fan 1200mmwith complete accessories including connection as required.
171	GST @ 5%
172	Contingency @ 0.5%
173	SERVICE MAINS, SYSTEM EARTHING AND DISTRIBUTION SYSTEM
174	L.T distribution switch board with aluminum bus bar, out-door type Kiosk, having electrolytic annealed Aluminum bus bar 50x12mm for phase & 50x6mm for neutral circuits mounted on glazed porcelain or Bakelite base & fitted with voltmeter, ammeter, selector switches for ammeter & voltmeter, electronic KWH meter, indicating lamps cabin light, fabricated with 12 gauge M.S plain sheet, painted with anti- rust primer & two coats of Epoxy paint of shade 631 as per IS: 8623-1, front opening doors with gasket & locking arrangement complete with following incoming & outgoing controls:
175	LTDB 100 A
176	INCOMING:1 No. 100 A, 4P,50KA, MCCB
177	OUTGOING: 3 Nos. 63A TP MCCB, 35 KA, & 1 No. 32A TP MCCB, 35 KA all with built in Thermo Magnetic Release.
178	Supplying & installation of MCB distribution board Double Door/Single door(CONFORMING TO CPWD /NBC/ Relevant IS & BIS Code)
179	b)12 ways SPN(Double door)
180	Supplying, installation, testing & commissioning ofMiniature circuit breaker (CONFORMING TO CPWD /NBC/ Relevant IS & BIS Code)
181	a)Single pole 6 - 32 Amps
182	b)Four pole 40Amps
183	P/L 3 ½ core x 95sqmm armoured cable
184	Rigid U PVC pipe of 120mm dia, as per IS:4985-2000 working pressure 6kgF/cm2 (FinOlex)
185	Providing & installing Copper tube type 1m long lightning arrestor having prongsat the top of the arrestor and base plate with nuts & bolts
186	Providing & earthing with 2 mtr. Long safe earthingwith T19 electrode & 1 bag back fill chemical compound
187	Provoding & laying of G.I. strips 25mm X 5mm looping earth from earth electrode to main distribution system of the building
188	Providiong & laying 6/8 SWG Copper wire from main dist. Pannel to distribution system of the building.
189	Surge Protection DeviceCONFORMING TO (CPWD/NBC/Relevant IS & BIS code)
190	a)SPD 40KA3P + N,(Type 2 SPDs ) 2 Mod
191	GST @ 5%
192	Contingency @ 0.5%
193	COMPOUND LIGHTING
194	8.5 meter long 410-SP-18 swaged type steel tubular pole with CI base plate and cap, double part (Nut bolt type) Working Load 120 kgs (Single Bracket)
195	Concreting of above poles in 1:4:8 ccm in 1.5 mtr deep pit and 14\"x14:x24\"high parapet.
196	LED Street light 80 Watt
197	2 core x 10 sqmm LT armoured cable for compound light.
198	1.5 sqmm ISI marked HRFRLS single core copper conductor cable (Havells)
199	MCB 6 Amps SP
200	Metal Box 6x4
201	Red oxide paint
202	AL paint
203	PVC tape
204	Excavation of cable trench in soft rock and filling of stack materials all complete.
205	Erection Charge @ 5%
206	Transportation Charge @10%
207	GST @ 5%
208	Contingency @ 0.5%
209	FIRE HYDRANTAND ALARM SYSTEM
210	FIRE HYDRANT SYSTEM
211	Single headed hydrant valve as per IS 5290 type A
212	100 mm TATA
213	80mm DO
214	4\" Gate Valve C.I 100mm
215	Valve 1\" heavy
216	Air released Valve
217	4\"\" bend
218	3\"\" flange
219	4\"\" flange
220	4\" butterfly Valve 80mm
221	Non-return Valve 80mm
222	welding rod
223	blank plate 3/4/6
224	PUMP HOUSE EQUIPMENT.
225	Electirc pump with 10HP mono block coupld with base plate
226	pump control pannel
227	pressure gauge shine phone with cock
228	pressure switch with cock
229	rubber gasket
230	Black nipple
231	Primer red colour brush/ sand paper
232	quarter sucket
233	Quarter nipple
234	3/8 socket
235	3/8 nipple
236	12mm wall 4\"\" fast nut long
237	angle 1/2
238	pump house cable 16mm
239	reducer 3/4
240	pump pct flange
241	FIRE ALARM SYSTEM
242	fire alaram pannel 08 zoon
243	hooter
244	smoke detector
245	Manual call point
246	wire 1.5 mm
247	pvc pipe & all fitings
248	GST @ 18%
249	Labour fitting & fixings

Need a Bussiness Loan? Apply Now!
Buy Digital Signature
Bidding Support

Also Visit

Tenders

Sikkim Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Construction Of Fire Station At Jalipool, Pakyong District, Sikkim., Pakyong-Sikkim

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Construction Of Fire Station At Jalipool, Pakyong District, Sikkim., Pakyong-Sikkim

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us